Merge tag 'dmaengine-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine

Pull dmaengine updates from Vinod Koul:
 "We have couple of drivers removed a new driver and bunch of new device
  support and few updates to drivers for this round.

  New drivers/devices:
   - Intel LGM SoC DMA driver
   - Actions Semi S500 DMA controller
   - Renesas r8a779a0 dma controller
   - Ingenic JZ4760(B) dma controller
   - Intel KeemBay AxiDMA controller

  Removed:
   - Coh901318 dma driver
   - Zte zx dma driver
   - Sirfsoc dma driver

  Updates:
   - mmp_pdma, mmp_tdma gained module support
   - imx-sdma become modern and dropped platform data support
   - dw-axi driver gained slave and cyclic dma support"

* tag 'dmaengine-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (58 commits)
  dmaengine: dw-axi-dmac: remove redundant null check on desc
  dmaengine: xilinx_dma: Alloc tx descriptors GFP_NOWAIT
  dmaengine: dw-axi-dmac: Virtually split the linked-list
  dmaengine: dw-axi-dmac: Set constraint to the Max segment size
  dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA BYTE and HALFWORD registers
  dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA handshake
  dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA support
  dmaengine: drivers: Kconfig: add HAS_IOMEM dependency to DW_AXI_DMAC
  dmaengine: dw-axi-dmac: Add Intel KeemBay DMA register fields
  dt-binding: dma: dw-axi-dmac: Add support for Intel KeemBay AxiDMA
  dmaengine: dw-axi-dmac: Support burst residue granularity
  dmaengine: dw-axi-dmac: Support of_dma_controller_register()
  dmaegine: dw-axi-dmac: Support device_prep_dma_cyclic()
  dmaengine: dw-axi-dmac: Support device_prep_slave_sg
  dmaengine: dw-axi-dmac: Add device_config operation
  dmaengine: dw-axi-dmac: Add device_synchronize() callback
  dmaengine: dw-axi-dmac: move dma_pool_create() to alloc_chan_resources()
  dmaengine: dw-axi-dmac: simplify descriptor management
  dt-bindings: dma: Add YAML schemas for dw-axi-dmac
  dmaengine: ti: k3-psil: optimize struct psil_endpoint_config for size
  ...

Documentation/admin-guide/kernel-parameters.txt

@@ -1674,6 +1674,12 @@
 			In such case C2/C3 won't be used again.
 			idle=nomwait: Disable mwait for CPU C-states
 
+	idxd.sva=	[HW]
+			Format: <bool>
+			Allow force disabling of Shared Virtual Memory (SVA)
+			support for the idxd driver. By default it is set to
+			true (1).
+
 	ieee754=	[MIPS] Select IEEE Std 754 conformance mode
 			Format: { strict | legacy | 2008 | relaxed }
 			Default: strict

Documentation/devicetree/bindings/dma/ingenic,dma.yaml

@@ -17,6 +17,8 @@ properties:
     enum:
       - ingenic,jz4740-dma
       - ingenic,jz4725b-dma
+      - ingenic,jz4760-dma
+      - ingenic,jz4760b-dma
       - ingenic,jz4770-dma
       - ingenic,jz4780-dma
       - ingenic,x1000-dma

Documentation/devicetree/bindings/dma/intel,ldma.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/intel,ldma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lightning Mountain centralized DMA controllers.
+
+maintainers:
+  - chuanhua.lei@intel.com
+  - mallikarjunax.reddy@intel.com
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - intel,lgm-cdma
+      - intel,lgm-dma2tx
+      - intel,lgm-dma1rx
+      - intel,lgm-dma1tx
+      - intel,lgm-dma0tx
+      - intel,lgm-dma3
+      - intel,lgm-toe-dma30
+      - intel,lgm-toe-dma31
+
+  reg:
+    maxItems: 1
+
+  "#dma-cells":
+    const: 3
+    description:
+      The first cell is the peripheral's DMA request line.
+      The second cell is the peripheral's (port) number corresponding to the channel.
+      The third cell is the burst length of the channel.
+
+  dma-channels:
+    minimum: 1
+    maximum: 16
+
+  dma-channel-mask:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: ctrl
+
+  interrupts:
+    maxItems: 1
+
+  intel,dma-poll-cnt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      DMA descriptor polling counter is used to control the poling mechanism
+      for the descriptor fetching for all channels.
+
+  intel,dma-byte-en:
+    type: boolean
+    description:
+      DMA byte enable is only valid for DMA write(RX).
+      Byte enable(1) means DMA write will be based on the number of dwords
+      instead of the whole burst.
+
+  intel,dma-drb:
+    type: boolean
+    description:
+      DMA descriptor read back to make sure data and desc synchronization.
+
+  intel,dma-dburst-wr:
+    type: boolean
+    description:
+      Enable RX dynamic burst write. When it is enabled, the DMA does RX dynamic burst;
+      if it is disabled, the DMA RX will still support programmable fixed burst size of 2,4,8,16.
+      It only applies to RX DMA and memcopy DMA.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    dma0: dma-controller@e0e00000 {
+      compatible = "intel,lgm-cdma";
+      reg = <0xe0e00000 0x1000>;
+      #dma-cells = <3>;
+      dma-channels = <16>;
+      dma-channel-mask = <0xFFFF>;
+      interrupt-parent = <&ioapic1>;
+      interrupts = <82 1>;
+      resets = <&rcu0 0x30 0>;
+      reset-names = "ctrl";
+      clocks = <&cgu0 80>;
+      intel,dma-poll-cnt = <4>;
+      intel,dma-byte-en;
+      intel,dma-drb;
+    };
+  - |
+    dma3: dma-controller@ec800000 {
+      compatible = "intel,lgm-dma3";
+      reg = <0xec800000 0x1000>;
+      clocks = <&cgu0 71>;
+      resets = <&rcu0 0x10 9>;
+      #dma-cells = <3>;
+      intel,dma-poll-cnt = <16>;
+      intel,dma-byte-en;
+      intel,dma-dburst-wr;
+    };

Documentation/devicetree/bindings/dma/owl-dma.yaml

@@ -8,8 +8,8 @@ title: Actions Semi Owl SoCs DMA controller
 
 description: |
   The OWL DMA is a general-purpose direct memory access controller capable of
-  supporting 10 and 12 independent DMA channels for S700 and S900 SoCs
-  respectively.
+  supporting 10 independent DMA channels for the Actions Semi S700 SoC and 12
+  independent DMA channels for the S500 and S900 SoC variants.
 
 maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
@@ -20,8 +20,9 @@ allOf:
 properties:
   compatible:
     enum:
-      - actions,s900-dma
+      - actions,s500-dma
       - actions,s700-dma
+      - actions,s900-dma
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml

@@ -14,7 +14,8 @@ allOf:
 
 properties:
   compatible:
-    items:
+    oneOf:
+      - items:
           - enum:
               - renesas,dmac-r8a7742  # RZ/G1H
               - renesas,dmac-r8a7743  # RZ/G1M
@@ -40,8 +41,10 @@ properties:
               - renesas,dmac-r8a77995 # R-Car D3
           - const: renesas,rcar-dmac
 
-  reg:
-    maxItems: 1
+      - items:
+          - const: renesas,dmac-r8a779a0 # R-Car V3U
+
+  reg: true
 
   interrupts:
     minItems: 9
@@ -110,6 +113,23 @@ required:
   - power-domains
   - resets
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,dmac-r8a779a0
+then:
+  properties:
+    reg:
+      items:
+        - description: Base register block
+        - description: Channel register block
+else:
+  properties:
+    reg:
+      maxItems: 1
+
 additionalProperties: false
 
 examples:

Documentation/devicetree/bindings/dma/sirfsoc-dma.txt

-* CSR SiRFSoC DMA controller
-
-See dma.txt first
-
-Required properties:
-- compatible: Should be "sirf,prima2-dmac", "sirf,atlas7-dmac" or
-  "sirf,atlas7-dmac-v2"
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain one interrupt shared by all channel
-- #dma-cells: must be <1>. used to represent the number of integer
-    cells in the dmas property of client device.
-- clocks: clock required
-
-Example:
-
-Controller:
-dmac0: dma-controller@b00b0000 {
-	compatible = "sirf,prima2-dmac";
-	reg = <0xb00b0000 0x10000>;
-	interrupts = <12>;
-	clocks = <&clks 24>;
-	#dma-cells = <1>;
-};
-
-
-Client:
-Fill the specific dma request line in dmas. In the below example, spi0 read
-channel request line is 9 of the 2nd dma controller, while write channel uses
-4 of the 2nd dma controller; spi1 read channel request line is 12 of the 1st
-dma controller, while write channel uses 13 of the 1st dma controller:
-
-spi0: spi@b00d0000 {
-	compatible = "sirf,prima2-spi";
-	dmas = <&dmac1 9>,
-		<&dmac1 4>;
-	dma-names = "rx", "tx";
-};
-
-spi1: spi@b0170000 {
-	compatible = "sirf,prima2-spi";
-	dmas = <&dmac0 12>,
-		<&dmac0 13>;
-	dma-names = "rx", "tx";
-};

Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt

-Synopsys DesignWare AXI DMA Controller
-
-Required properties:
-- compatible: "snps,axi-dma-1.01a"
-- reg: Address range of the DMAC registers. This should include
-  all of the per-channel registers.
-- interrupt: Should contain the DMAC interrupt number.
-- dma-channels: Number of channels supported by hardware.
-- snps,dma-masters: Number of AXI masters supported by the hardware.
-- snps,data-width: Maximum AXI data width supported by hardware.
-  (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
-- snps,priority: Priority of channel. Array size is equal to the number of
-  dma-channels. Priority value must be programmed within [0:dma-channels-1]
-  range. (0 - minimum priority)
-- snps,block-size: Maximum block size supported by the controller channel.
-  Array size is equal to the number of dma-channels.
-
-Optional properties:
-- snps,axi-max-burst-len: Restrict master AXI burst length by value specified
-  in this property. If this property is missing the maximum AXI burst length
-  supported by DMAC is used. [1:256]
-
-Example:
-
-dmac: dma-controller@80000 {
-	compatible = "snps,axi-dma-1.01a";
-	reg = <0x80000 0x400>;
-	clocks = <&core_clk>, <&cfgr_clk>;
-	clock-names = "core-clk", "cfgr-clk";
-	interrupt-parent = <&intc>;
-	interrupts = <27>;
-
-	dma-channels = <4>;
-	snps,dma-masters = <2>;
-	snps,data-width = <3>;
-	snps,block-size = <4096 4096 4096 4096>;
-	snps,priority = <0 1 2 3>;
-	snps,axi-max-burst-len = <16>;
-};

Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/snps,dw-axi-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare AXI DMA Controller
+
+maintainers:
+  - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+  - Jee Heng Sia <jee.heng.sia@intel.com>
+
+description:
+  Synopsys DesignWare AXI DMA Controller DT Binding
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - snps,axi-dma-1.01a
+      - intel,kmb-axi-dma
+
+  reg:
+    minItems: 1
+    items:
+      - description: Address range of the DMAC registers
+      - description: Address range of the DMAC APB registers
+
+  reg-names:
+    items:
+      - const: axidma_ctrl_regs
+      - const: axidma_apb_regs
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: core-clk
+      - const: cfgr-clk
+
+  '#dma-cells':
+    const: 1
+
+  dma-channels:
+    minimum: 1
+    maximum: 8
+
+  snps,dma-masters:
+    description: |
+      Number of AXI masters supported by the hardware.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+
+  snps,data-width:
+    description: |
+      AXI data width supported by hardware.
+      (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6]
+
+  snps,priority:
+    description: |
+      Channel priority specifier associated with the DMA channels.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  snps,block-size:
+    description: |
+      Channel block size specifier associated with the DMA channels.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  snps,axi-max-burst-len:
+    description: |
+      Restrict master AXI burst length by value specified in this property.
+      If this property is missing the maximum AXI burst length supported by
+      DMAC is used.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 256
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - '#dma-cells'
+  - dma-channels
+  - snps,dma-masters
+  - snps,data-width
+  - snps,priority
+  - snps,block-size
+
+additionalProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/interrupt-controller/arm-gic.h>
+     #include <dt-bindings/interrupt-controller/irq.h>
+     /* example with snps,dw-axi-dmac */
+     dmac: dma-controller@80000 {
+         compatible = "snps,axi-dma-1.01a";
+         reg = <0x80000 0x400>;
+         clocks = <&core_clk>, <&cfgr_clk>;
+         clock-names = "core-clk", "cfgr-clk";
+         interrupt-parent = <&intc>;
+         interrupts = <27>;
+         #dma-cells = <1>;
+         dma-channels = <4>;
+         snps,dma-masters = <2>;
+         snps,data-width = <3>;
+         snps,block-size = <4096 4096 4096 4096>;
+         snps,priority = <0 1 2 3>;
+         snps,axi-max-burst-len = <16>;
+     };

Documentation/devicetree/bindings/dma/ste-coh901318.txt

-ST-Ericsson COH 901 318 DMA Controller
-
-This is a DMA controller which has begun as a fork of the
-ARM PL08x PrimeCell VHDL code.
-
-Required properties:
-- compatible: should be "stericsson,coh901318"
-- reg: register locations and length
-- interrupts: the single DMA IRQ
-- #dma-cells: must be set to <1>, as the channels on the
-  COH 901 318 are simple and identified by a single number
-- dma-channels: the number of DMA channels handled
-
-Example:
-
-dmac: dma-controller@c00020000 {
-	compatible = "stericsson,coh901318";
-	reg = <0xc0020000 0x1000>;
-	interrupt-parent = <&vica>;
-	interrupts = <2>;
-	#dma-cells = <1>;
-	dma-channels = <40>;
-};
-
-Consumers example:
-
-uart0: serial@c0013000 {
-	compatible = "...";
-	(...)
-	dmas = <&dmac 17 &dmac 18>;
-	dma-names = "tx", "rx";
-};

Documentation/devicetree/bindings/dma/zxdma.txt

-* ZTE ZX296702 DMA controller
-
-Required properties:
-- compatible: Should be "zte,zx296702-dma"
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain one interrupt shared by all channel
-- #dma-cells: see dma.txt, should be 1, para number
-- dma-channels: physical channels supported
-- dma-requests: virtual channels supported, each virtual channel
-		have specific request line
-- clocks: clock required
-
-Example:
-
-Controller:
-	dma: dma-controller@09c00000{
-		compatible = "zte,zx296702-dma";
-		reg = <0x09c00000 0x1000>;
-		clocks = <&topclk ZX296702_DMA_ACLK>;
-		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-		#dma-cells = <1>;
-		dma-channels = <24>;
-		dma-requests = <24>;
-	};
-
-Client:
-Use specific request line passing from dmax
-For example, spdif0 tx channel request line is 4
-	spdif0: spdif0@b004000 {
-		#sound-dai-cells = <0>;
-		compatible = "zte,zx296702-spdif";
-		reg = <0x0b004000 0x1000>;
-		clocks = <&lsp0clk ZX296702_SPDIF0_DIV>;
-		clock-names = "tx";
-		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-		dmas = <&dma 4>;
-		dma-names = "tx";
-	}

MAINTAINERS

@@ -2828,9 +2828,7 @@ S:	Odd fixes
 W:	http://sourceforge.net/projects/xscaleiop
 F:	Documentation/crypto/async-tx-api.rst
 F:	crypto/async_tx/
-F:	drivers/dma/
 F:	include/linux/async_tx.h
-F:	include/linux/dmaengine.h
 
 AT24 EEPROM DRIVER
 M:	Bartosz Golaszewski <bgolaszewski@baylibre.com>
@@ -5271,6 +5269,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.git
 F:	Documentation/devicetree/bindings/dma/
 F:	Documentation/driver-api/dmaengine/
 F:	drivers/dma/
+F:	include/linux/dma/
 F:	include/linux/dmaengine.h
 F:	include/linux/of_dma.h
 
@@ -11614,7 +11613,6 @@ F:	drivers/dma/at_hdmac.c
 F:	drivers/dma/at_hdmac_regs.h
 F:	drivers/dma/at_xdmac.c
 F:	include/dt-bindings/dma/at91.h
-F:	include/linux/platform_data/dma-atmel.h
 
 MICROCHIP AT91 SERIAL DRIVER
 M:	Richard Genoud <richard.genoud@gmail.com>

drivers/dma/Kconfig

@@ -124,13 +124,6 @@ config BCM_SBA_RAID
 	  has the capability to offload memcpy, xor and pq computation
 	  for raid5/6.
 
-config COH901318
-	bool "ST-Ericsson COH901318 DMA support"
-	select DMA_ENGINE
-	depends on ARCH_U300 || COMPILE_TEST
-	help
-	  Enable support for ST-Ericsson COH 901 318 DMA.
-
 config DMA_BCM2835
 	tristate "BCM2835 DMA engine support"
 	depends on ARCH_BCM2835
@@ -179,6 +172,7 @@ config DMA_SUN6I
 config DW_AXI_DMAC
 	tristate "Synopsys DesignWare AXI DMA support"
 	depends on OF || COMPILE_TEST
+	depends on HAS_IOMEM
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 	help
@@ -378,14 +372,14 @@ config MILBEAUT_XDMAC
 	  XDMAC device.
 
 config MMP_PDMA
-	bool "MMP PDMA support"
+	tristate "MMP PDMA support"
 	depends on ARCH_MMP || ARCH_PXA || COMPILE_TEST
 	select DMA_ENGINE
 	help
 	  Support the MMP PDMA engine for PXA and MMP platform.
 
 config MMP_TDMA
-	bool "MMP Two-Channel DMA support"
+	tristate "MMP Two-Channel DMA support"
 	depends on ARCH_MMP || COMPILE_TEST
 	select DMA_ENGINE
 	select GENERIC_ALLOCATOR
@@ -519,13 +513,6 @@ config PLX_DMA
 	  These are exposed via extra functions on the switch's
 	  upstream port. Each function exposes one DMA channel.
 
-config SIRF_DMA
-	tristate "CSR SiRFprimaII/SiRFmarco DMA support"
-	depends on ARCH_SIRF
-	select DMA_ENGINE
-	help
-	  Enable support for the CSR SiRFprimaII DMA engine.
-
 config STE_DMA40
 	bool "ST-Ericsson DMA40 support"
 	depends on ARCH_U8500
@@ -710,15 +697,6 @@ config XILINX_ZYNQMP_DPDMA
 	  driver provides the dmaengine required by the DisplayPort subsystem
 	  display driver.
 
-config ZX_DMA
-	tristate "ZTE ZX DMA support"
-	depends on ARCH_ZX || COMPILE_TEST
-	select DMA_ENGINE
-	select DMA_VIRTUAL_CHANNELS
-	help
-	  Support the DMA engine for ZTE ZX family platform devices.
-
-
 # driver files
 source "drivers/dma/bestcomm/Kconfig"
 
@@ -740,6 +718,8 @@ source "drivers/dma/ti/Kconfig"
 
 source "drivers/dma/fsl-dpaa2-qdma/Kconfig"
 
+source "drivers/dma/lgm/Kconfig"
+
 # clients
 comment "DMA Clients"
 	depends on DMA_ENGINE

drivers/dma/Makefile

@@ -20,7 +20,6 @@ obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
 obj-$(CONFIG_AT_XDMAC) += at_xdmac.o
 obj-$(CONFIG_AXI_DMAC) += dma-axi-dmac.o
 obj-$(CONFIG_BCM_SBA_RAID) += bcm-sba-raid.o
-obj-$(CONFIG_COH901318) += coh901318.o coh901318_lli.o
 obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o
 obj-$(CONFIG_DMA_JZ4780) += dma-jz4780.o
 obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
@@ -65,7 +64,6 @@ obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
 obj-$(CONFIG_PXA_DMA) += pxa_dma.o
 obj-$(CONFIG_RENESAS_DMA) += sh/
 obj-$(CONFIG_SF_PDMA) += sf-pdma/
-obj-$(CONFIG_SIRF_DMA) += sirf-dma.o
 obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
 obj-$(CONFIG_STM32_DMA) += stm32-dma.o
 obj-$(CONFIG_STM32_DMAMUX) += stm32-dmamux.o
@@ -79,9 +77,9 @@ obj-$(CONFIG_TIMB_DMA) += timb_dma.o
 obj-$(CONFIG_UNIPHIER_MDMAC) += uniphier-mdmac.o
 obj-$(CONFIG_UNIPHIER_XDMAC) += uniphier-xdmac.o
 obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
-obj-$(CONFIG_ZX_DMA) += zx_dma.o
 obj-$(CONFIG_ST_FDMA) += st_fdma.o
 obj-$(CONFIG_FSL_DPAA2_QDMA) += fsl-dpaa2-qdma/
+obj-$(CONFIG_INTEL_LDMA) += lgm/
 
 obj-y += mediatek/
 obj-y += qcom/

drivers/dma/at_hdmac.c

@@ -54,6 +54,25 @@ module_param(init_nr_desc_per_channel, uint, 0644);
 MODULE_PARM_DESC(init_nr_desc_per_channel,
 		 "initial descriptors per channel (default: 64)");
 
+/**
+ * struct at_dma_platform_data - Controller configuration parameters
+ * @nr_channels: Number of channels supported by hardware (max 8)
+ * @cap_mask: dma_capability flags supported by the platform
+ */
+struct at_dma_platform_data {
+	unsigned int	nr_channels;
+	dma_cap_mask_t  cap_mask;
+};
+
+/**
+ * struct at_dma_slave - Controller-specific information about a slave
+ * @dma_dev: required DMA master device
+ * @cfg: Platform-specific initializer for the CFG register
+ */
+struct at_dma_slave {
+	struct device		*dma_dev;
+	u32			cfg;
+};
 
 /* prototypes */
 static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx);

drivers/dma/at_hdmac_regs.h

@@ -7,8 +7,6 @@
 #ifndef AT_HDMAC_REGS_H
 #define	AT_HDMAC_REGS_H
 
-#include <linux/platform_data/dma-atmel.h>
-
 #define	AT_DMA_MAX_NR_CHANNELS	8
 
 
@@ -148,7 +146,31 @@
 #define	ATC_AUTO		(0x1 << 31)	/* Auto multiple buffer tx enable */
 
 /* Bitfields in CFG */
-/* are in at_hdmac.h */
+#define ATC_PER_MSB(h)	((0x30U & (h)) >> 4)	/* Extract most significant bits of a handshaking identifier */
+
+#define	ATC_SRC_PER(h)		(0xFU & (h))	/* Channel src rq associated with periph handshaking ifc h */
+#define	ATC_DST_PER(h)		((0xFU & (h)) <<  4)	/* Channel dst rq associated with periph handshaking ifc h */
+#define	ATC_SRC_REP		(0x1 <<  8)	/* Source Replay Mod */
+#define	ATC_SRC_H2SEL		(0x1 <<  9)	/* Source Handshaking Mod */
+#define		ATC_SRC_H2SEL_SW	(0x0 <<  9)
+#define		ATC_SRC_H2SEL_HW	(0x1 <<  9)
+#define	ATC_SRC_PER_MSB(h)	(ATC_PER_MSB(h) << 10)	/* Channel src rq (most significant bits) */
+#define	ATC_DST_REP		(0x1 << 12)	/* Destination Replay Mod */
+#define	ATC_DST_H2SEL		(0x1 << 13)	/* Destination Handshaking Mod */
+#define		ATC_DST_H2SEL_SW	(0x0 << 13)
+#define		ATC_DST_H2SEL_HW	(0x1 << 13)
+#define	ATC_DST_PER_MSB(h)	(ATC_PER_MSB(h) << 14)	/* Channel dst rq (most significant bits) */
+#define	ATC_SOD			(0x1 << 16)	/* Stop On Done */
+#define	ATC_LOCK_IF		(0x1 << 20)	/* Interface Lock */
+#define	ATC_LOCK_B		(0x1 << 21)	/* AHB Bus Lock */
+#define	ATC_LOCK_IF_L		(0x1 << 22)	/* Master Interface Arbiter Lock */
+#define		ATC_LOCK_IF_L_CHUNK	(0x0 << 22)
+#define		ATC_LOCK_IF_L_BUFFER	(0x1 << 22)
+#define	ATC_AHB_PROT_MASK	(0x7 << 24)	/* AHB Protection */
+#define	ATC_FIFOCFG_MASK	(0x3 << 28)	/* FIFO Request Configuration */
+#define		ATC_FIFOCFG_LARGESTBURST	(0x0 << 28)
+#define		ATC_FIFOCFG_HALFFIFO		(0x1 << 28)
+#define		ATC_FIFOCFG_ENOUGHSPACE		(0x2 << 28)
 
 /* Bitfields in SPIP */
 #define	ATC_SPIP_HOLE(x)	(0xFFFFU & (x))

drivers/dma/coh901318.h

-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2007-2013 ST-Ericsson
- * DMA driver for COH 901 318
- * Author: Per Friden <per.friden@stericsson.com>
- */
-
-#ifndef COH901318_H
-#define COH901318_H
-
-#define MAX_DMA_PACKET_SIZE_SHIFT 11
-#define MAX_DMA_PACKET_SIZE (1 << MAX_DMA_PACKET_SIZE_SHIFT)
-
-struct device;
-
-struct coh901318_pool {
-	spinlock_t lock;
-	struct dma_pool *dmapool;
-	struct device *dev;
-
-#ifdef CONFIG_DEBUG_FS
-	int debugfs_pool_counter;
-#endif
-};
-
-/**
- * struct coh901318_lli - linked list item for DMAC
- * @control: control settings for DMAC
- * @src_addr: transfer source address
- * @dst_addr: transfer destination address
- * @link_addr:  physical address to next lli
- * @virt_link_addr: virtual address of next lli (only used by pool_free)
- * @phy_this: physical address of current lli (only used by pool_free)
- */
-struct coh901318_lli {
-	u32 control;
-	dma_addr_t src_addr;
-	dma_addr_t dst_addr;
-	dma_addr_t link_addr;
-
-	void *virt_link_addr;
-	dma_addr_t phy_this;
-};
-
-/**
- * coh901318_pool_create() - Creates an dma pool for lli:s
- * @pool: pool handle
- * @dev: dma device
- * @lli_nbr: number of lli:s in the pool
- * @algin: address alignemtn of lli:s
- * returns 0 on success otherwise none zero
- */
-int coh901318_pool_create(struct coh901318_pool *pool,
-			  struct device *dev,
-			  size_t lli_nbr, size_t align);
-
-/**
- * coh901318_pool_destroy() - Destroys the dma pool
- * @pool: pool handle
- * returns 0 on success otherwise none zero
- */
-int coh901318_pool_destroy(struct coh901318_pool *pool);
-
-/**
- * coh901318_lli_alloc() - Allocates a linked list
- *
- * @pool: pool handle
- * @len: length to list
- * return: none NULL if success otherwise NULL
- */
-struct coh901318_lli *
-coh901318_lli_alloc(struct coh901318_pool *pool,
-		    unsigned int len);
-
-/**
- * coh901318_lli_free() - Returns the linked list items to the pool
- * @pool: pool handle
- * @lli: reference to lli pointer to be freed
- */
-void coh901318_lli_free(struct coh901318_pool *pool,
-			struct coh901318_lli **lli);
-
-/**
- * coh901318_lli_fill_memcpy() - Prepares the lli:s for dma memcpy
- * @pool: pool handle
- * @lli: allocated lli
- * @src: src address
- * @size: transfer size
- * @dst: destination address
- * @ctrl_chained: ctrl for chained lli
- * @ctrl_last: ctrl for the last lli
- * returns number of CPU interrupts for the lli, negative on error.
- */
-int
-coh901318_lli_fill_memcpy(struct coh901318_pool *pool,
-			  struct coh901318_lli *lli,
-			  dma_addr_t src, unsigned int size,
-			  dma_addr_t dst, u32 ctrl_chained, u32 ctrl_last);
-
-/**
- * coh901318_lli_fill_single() - Prepares the lli:s for dma single transfer
- * @pool: pool handle
- * @lli: allocated lli
- * @buf: transfer buffer
- * @size: transfer size
- * @dev_addr: address of periphal
- * @ctrl_chained: ctrl for chained lli
- * @ctrl_last: ctrl for the last lli
- * @dir: direction of transfer (to or from device)
- * returns number of CPU interrupts for the lli, negative on error.
- */
-int
-coh901318_lli_fill_single(struct coh901318_pool *pool,
-			  struct coh901318_lli *lli,
-			  dma_addr_t buf, unsigned int size,
-			  dma_addr_t dev_addr, u32 ctrl_chained, u32 ctrl_last,
-			  enum dma_transfer_direction dir);
-
-/**
- * coh901318_lli_fill_single() - Prepares the lli:s for dma scatter list transfer
- * @pool: pool handle
- * @lli: allocated lli
- * @sg: scatter gather list
- * @nents: number of entries in sg
- * @dev_addr: address of periphal
- * @ctrl_chained: ctrl for chained lli
- * @ctrl: ctrl of middle lli
- * @ctrl_last: ctrl for the last lli
- * @dir: direction of transfer (to or from device)
- * @ctrl_irq_mask: ctrl mask for CPU interrupt
- * returns number of CPU interrupts for the lli, negative on error.
- */
-int
-coh901318_lli_fill_sg(struct coh901318_pool *pool,
-		      struct coh901318_lli *lli,
-		      struct scatterlist *sg, unsigned int nents,
-		      dma_addr_t dev_addr, u32 ctrl_chained,
-		      u32 ctrl, u32 ctrl_last,
-		      enum dma_transfer_direction dir, u32 ctrl_irq_mask);
-
-#endif /* COH901318_H */

drivers/dma/coh901318_lli.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * driver/dma/coh901318_lli.c
- *
- * Copyright (C) 2007-2009 ST-Ericsson
- * Support functions for handling lli for dma
- * Author: Per Friden <per.friden@stericsson.com>
- */
-
-#include <linux/spinlock.h>
-#include <linux/memory.h>
-#include <linux/gfp.h>
-#include <linux/dmapool.h>
-#include <linux/dmaengine.h>
-
-#include "coh901318.h"
-
-#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
-#define DEBUGFS_POOL_COUNTER_RESET(pool) (pool->debugfs_pool_counter = 0)
-#define DEBUGFS_POOL_COUNTER_ADD(pool, add) (pool->debugfs_pool_counter += add)
-#else
-#define DEBUGFS_POOL_COUNTER_RESET(pool)
-#define DEBUGFS_POOL_COUNTER_ADD(pool, add)
-#endif
-
-static struct coh901318_lli *
-coh901318_lli_next(struct coh901318_lli *data)
-{
-	if (data == NULL || data->link_addr == 0)
-		return NULL;
-
-	return (struct coh901318_lli *) data->virt_link_addr;
-}
-
-int coh901318_pool_create(struct coh901318_pool *pool,
-			  struct device *dev,
-			  size_t size, size_t align)
-{
-	spin_lock_init(&pool->lock);
-	pool->dev = dev;
-	pool->dmapool = dma_pool_create("lli_pool", dev, size, align, 0);
-
-	DEBUGFS_POOL_COUNTER_RESET(pool);
-	return 0;
-}
-
-int coh901318_pool_destroy(struct coh901318_pool *pool)
-{
-
-	dma_pool_destroy(pool->dmapool);
-	return 0;
-}
-
-struct coh901318_lli *
-coh901318_lli_alloc(struct coh901318_pool *pool, unsigned int len)
-{
-	int i;
-	struct coh901318_lli *head;
-	struct coh901318_lli *lli;
-	struct coh901318_lli *lli_prev;
-	dma_addr_t phy;
-
-	if (len == 0)
-		return NULL;
-
-	spin_lock(&pool->lock);
-
-	head = dma_pool_alloc(pool->dmapool, GFP_NOWAIT, &phy);
-
-	if (head == NULL)
-		goto err;
-
-	DEBUGFS_POOL_COUNTER_ADD(pool, 1);
-
-	lli = head;
-	lli->phy_this = phy;
-	lli->link_addr = 0x00000000;
-	lli->virt_link_addr = NULL;
-
-	for (i = 1; i < len; i++) {
-		lli_prev = lli;
-
-		lli = dma_pool_alloc(pool->dmapool, GFP_NOWAIT, &phy);
-
-		if (lli == NULL)
-			goto err_clean_up;
-
-		DEBUGFS_POOL_COUNTER_ADD(pool, 1);
-		lli->phy_this = phy;
-		lli->link_addr = 0x00000000;
-		lli->virt_link_addr = NULL;
-
-		lli_prev->link_addr = phy;
-		lli_prev->virt_link_addr = lli;
-	}
-
-	spin_unlock(&pool->lock);
-
-	return head;
-
- err:
-	spin_unlock(&pool->lock);
-	return NULL;
-
- err_clean_up:
-	lli_prev->link_addr = 0x00000000U;
-	spin_unlock(&pool->lock);
-	coh901318_lli_free(pool, &head);
-	return NULL;
-}
-
-void coh901318_lli_free(struct coh901318_pool *pool,
-			struct coh901318_lli **lli)
-{
-	struct coh901318_lli *l;
-	struct coh901318_lli *next;
-
-	if (lli == NULL)
-		return;
-
-	l = *lli;
-
-	if (l == NULL)
-		return;
-
-	spin_lock(&pool->lock);
-
-	while (l->link_addr) {
-		next = l->virt_link_addr;
-		dma_pool_free(pool->dmapool, l, l->phy_this);
-		DEBUGFS_POOL_COUNTER_ADD(pool, -1);
-		l = next;
-	}
-	dma_pool_free(pool->dmapool, l, l->phy_this);
-	DEBUGFS_POOL_COUNTER_ADD(pool, -1);
-
-	spin_unlock(&pool->lock);
-	*lli = NULL;
-}
-
-int
-coh901318_lli_fill_memcpy(struct coh901318_pool *pool,
-			  struct coh901318_lli *lli,
-			  dma_addr_t source, unsigned int size,
-			  dma_addr_t destination, u32 ctrl_chained,
-			  u32 ctrl_eom)
-{
-	int s = size;
-	dma_addr_t src = source;
-	dma_addr_t dst = destination;
-
-	lli->src_addr = src;
-	lli->dst_addr = dst;
-
-	while (lli->link_addr) {
-		lli->control = ctrl_chained | MAX_DMA_PACKET_SIZE;
-		lli->src_addr = src;
-		lli->dst_addr = dst;
-
-		s -= MAX_DMA_PACKET_SIZE;
-		lli = coh901318_lli_next(lli);
-
-		src += MAX_DMA_PACKET_SIZE;
-		dst += MAX_DMA_PACKET_SIZE;
-	}
-
-	lli->control = ctrl_eom | s;
-	lli->src_addr = src;
-	lli->dst_addr = dst;
-
-	return 0;
-}
-
-int
-coh901318_lli_fill_single(struct coh901318_pool *pool,
-			  struct coh901318_lli *lli,
-			  dma_addr_t buf, unsigned int size,
-			  dma_addr_t dev_addr, u32 ctrl_chained, u32 ctrl_eom,
-			  enum dma_transfer_direction dir)
-{
-	int s = size;
-	dma_addr_t src;
-	dma_addr_t dst;
-
-
-	if (dir == DMA_MEM_TO_DEV) {
-		src = buf;
-		dst = dev_addr;
-
-	} else if (dir == DMA_DEV_TO_MEM) {
-
-		src = dev_addr;
-		dst = buf;
-	} else {
-		return -EINVAL;
-	}
-
-	while (lli->link_addr) {
-		size_t block_size = MAX_DMA_PACKET_SIZE;
-		lli->control = ctrl_chained | MAX_DMA_PACKET_SIZE;
-
-		/* If we are on the next-to-final block and there will
-		 * be less than half a DMA packet left for the last
-		 * block, then we want to make this block a little
-		 * smaller to balance the sizes. This is meant to
-		 * avoid too small transfers if the buffer size is
-		 * (MAX_DMA_PACKET_SIZE*N + 1) */
-		if (s < (MAX_DMA_PACKET_SIZE + MAX_DMA_PACKET_SIZE/2))
-			block_size = MAX_DMA_PACKET_SIZE/2;
-
-		s -= block_size;
-		lli->src_addr = src;
-		lli->dst_addr = dst;
-
-		lli = coh901318_lli_next(lli);
-
-		if (dir == DMA_MEM_TO_DEV)
-			src += block_size;
-		else if (dir == DMA_DEV_TO_MEM)
-			dst += block_size;
-	}
-
-	lli->control = ctrl_eom | s;
-	lli->src_addr = src;
-	lli->dst_addr = dst;
-
-	return 0;
-}
-
-int
-coh901318_lli_fill_sg(struct coh901318_pool *pool,
-		      struct coh901318_lli *lli,
-		      struct scatterlist *sgl, unsigned int nents,
-		      dma_addr_t dev_addr, u32 ctrl_chained, u32 ctrl,
-		      u32 ctrl_last,
-		      enum dma_transfer_direction dir, u32 ctrl_irq_mask)
-{
-	int i;
-	struct scatterlist *sg;
-	u32 ctrl_sg;
-	dma_addr_t src = 0;
-	dma_addr_t dst = 0;
-	u32 bytes_to_transfer;
-	u32 elem_size;
-
-	if (lli == NULL)
-		goto err;
-
-	spin_lock(&pool->lock);
-
-	if (dir == DMA_MEM_TO_DEV)
-		dst = dev_addr;
-	else if (dir == DMA_DEV_TO_MEM)
-		src = dev_addr;
-	else
-		goto err;
-
-	for_each_sg(sgl, sg, nents, i) {
-		if (sg_is_chain(sg)) {
-			/* sg continues to the next sg-element don't
-			 * send ctrl_finish until the last
-			 * sg-element in the chain
-			 */
-			ctrl_sg = ctrl_chained;
-		} else if (i == nents - 1)
-			ctrl_sg = ctrl_last;
-		else
-			ctrl_sg = ctrl ? ctrl : ctrl_last;
-
-
-		if (dir == DMA_MEM_TO_DEV)
-			/* increment source address */
-			src = sg_dma_address(sg);
-		else
-			/* increment destination address */
-			dst = sg_dma_address(sg);
-
-		bytes_to_transfer = sg_dma_len(sg);
-
-		while (bytes_to_transfer) {
-			u32 val;
-
-			if (bytes_to_transfer > MAX_DMA_PACKET_SIZE) {
-				elem_size = MAX_DMA_PACKET_SIZE;
-				val = ctrl_chained;
-			} else {
-				elem_size = bytes_to_transfer;
-				val = ctrl_sg;
-			}
-
-			lli->control = val | elem_size;
-			lli->src_addr = src;
-			lli->dst_addr = dst;
-
-			if (dir == DMA_DEV_TO_MEM)
-				dst += elem_size;
-			else
-				src += elem_size;
-
-			BUG_ON(lli->link_addr & 3);
-
-			bytes_to_transfer -= elem_size;
-			lli = coh901318_lli_next(lli);
-		}
-
-	}
-	spin_unlock(&pool->lock);
-
-	return 0;
- err:
-	spin_unlock(&pool->lock);
-	return -EINVAL;
-}

drivers/dma/dma-jz4780.c

@@ -1004,6 +1004,18 @@ static const struct jz4780_dma_soc_data jz4725b_dma_soc_data = {
 		 JZ_SOC_DATA_BREAK_LINKS,
 };
 
+static const struct jz4780_dma_soc_data jz4760_dma_soc_data = {
+	.nb_channels = 5,
+	.transfer_ord_max = 6,
+	.flags = JZ_SOC_DATA_PER_CHAN_PM | JZ_SOC_DATA_NO_DCKES_DCKEC,
+};
+
+static const struct jz4780_dma_soc_data jz4760b_dma_soc_data = {
+	.nb_channels = 5,
+	.transfer_ord_max = 6,
+	.flags = JZ_SOC_DATA_PER_CHAN_PM,
+};
+
 static const struct jz4780_dma_soc_data jz4770_dma_soc_data = {
 	.nb_channels = 6,
 	.transfer_ord_max = 6,
@@ -1031,6 +1043,8 @@ static const struct jz4780_dma_soc_data x1830_dma_soc_data = {
 static const struct of_device_id jz4780_dma_dt_match[] = {
 	{ .compatible = "ingenic,jz4740-dma", .data = &jz4740_dma_soc_data },
 	{ .compatible = "ingenic,jz4725b-dma", .data = &jz4725b_dma_soc_data },
+	{ .compatible = "ingenic,jz4760-dma", .data = &jz4760_dma_soc_data },
+	{ .compatible = "ingenic,jz4760b-dma", .data = &jz4760b_dma_soc_data },
 	{ .compatible = "ingenic,jz4770-dma", .data = &jz4770_dma_soc_data },
 	{ .compatible = "ingenic,jz4780-dma", .data = &jz4780_dma_soc_data },
 	{ .compatible = "ingenic,x1000-dma", .data = &x1000_dma_soc_data },

drivers/dma/dw-axi-dmac/dw-axi-dmac.h

@@ -37,10 +37,16 @@ struct axi_dma_chan {
 	struct axi_dma_chip		*chip;
 	void __iomem			*chan_regs;
 	u8				id;
+	u8				hw_handshake_num;
 	atomic_t			descs_allocated;
 
+	struct dma_pool			*desc_pool;
 	struct virt_dma_chan		vc;
 
+	struct axi_dma_desc		*desc;
+	struct dma_slave_config		config;
+	enum dma_transfer_direction	direction;
+	bool				cyclic;
 	/* these other elements are all protected by vc.lock */
 	bool				is_paused;
 };
@@ -48,7 +54,7 @@ struct axi_dma_chan {
 struct dw_axi_dma {
 	struct dma_device	dma;
 	struct dw_axi_dma_hcfg	*hdata;
-	struct dma_pool		*desc_pool;
+	struct device_dma_parameters	dma_parms;
 
 	/* channels */
 	struct axi_dma_chan	*chan;
@@ -58,6 +64,7 @@ struct axi_dma_chip {
 	struct device		*dev;
 	int			irq;
 	void __iomem		*regs;
+	void __iomem		*apb_regs;
 	struct clk		*core_clk;
 	struct clk		*cfgr_clk;
 	struct dw_axi_dma	*dw;
@@ -80,12 +87,20 @@ struct __packed axi_dma_lli {
 	__le32		reserved_hi;
 };
 
+struct axi_dma_hw_desc {
+	struct axi_dma_lli	*lli;
+	dma_addr_t		llp;
+	u32			len;
+};
+
 struct axi_dma_desc {
-	struct axi_dma_lli		lli;
+	struct axi_dma_hw_desc	*hw_desc;
 
 	struct virt_dma_desc		vd;
 	struct axi_dma_chan		*chan;
-	struct list_head		xfer_list;
+	u32				completed_blocks;
+	u32				length;
+	u32				period_len;
 };
 
 static inline struct device *dchan2dev(struct dma_chan *dchan)
@@ -157,6 +172,19 @@ static inline struct axi_dma_chan *dchan_to_axi_dma_chan(struct dma_chan *dchan)
 #define CH_INTSIGNAL_ENA	0x090 /* R/W Chan Interrupt Signal Enable */
 #define CH_INTCLEAR		0x098 /* W Chan Interrupt Clear */
 
+/* These Apb registers are used by Intel KeemBay SoC */
+#define DMAC_APB_CFG		0x000 /* DMAC Apb Configuration Register */
+#define DMAC_APB_STAT		0x004 /* DMAC Apb Status Register */
+#define DMAC_APB_DEBUG_STAT_0	0x008 /* DMAC Apb Debug Status Register 0 */
+#define DMAC_APB_DEBUG_STAT_1	0x00C /* DMAC Apb Debug Status Register 1 */
+#define DMAC_APB_HW_HS_SEL_0	0x010 /* DMAC Apb HW HS register 0 */
+#define DMAC_APB_HW_HS_SEL_1	0x014 /* DMAC Apb HW HS register 1 */
+#define DMAC_APB_LPI		0x018 /* DMAC Apb Low Power Interface Reg */
+#define DMAC_APB_BYTE_WR_CH_EN	0x01C /* DMAC Apb Byte Write Enable */
+#define DMAC_APB_HALFWORD_WR_CH_EN	0x020 /* DMAC Halfword write enables */
+
+#define UNUSED_CHANNEL		0x3F /* Set unused DMA channel to 0x3F */
+#define MAX_BLOCK_SIZE		0x1000 /* 1024 blocks * 4 bytes data width */
 
 /* DMAC_CFG */
 #define DMAC_EN_POS			0

drivers/dma/idxd/dma.c

@@ -165,6 +165,7 @@ int idxd_register_dma_device(struct idxd_device *idxd)
 	INIT_LIST_HEAD(&dma->channels);
 	dma->dev = &idxd->pdev->dev;
 
+	dma_cap_set(DMA_PRIVATE, dma->cap_mask);
 	dma_cap_set(DMA_COMPLETION_NO_ORDER, dma->cap_mask);
 	dma->device_release = idxd_dma_release;