e1000e: add netpoll support for MSI/MSI-X IRQ modes

With enabling CONFIG_PCI_MSI, e1000e could work in MSI/MSI-X IRQ mode,
and netpoll controller didn't deal with those IRQ modes on e1000e.

This patch add the handling MSI/MSI-X IRQ modes to netpoll controller,
so that netconsole could work with those IRQ modes.
Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/e1000e/netdev.c

@@ -5465,6 +5465,36 @@ static void e1000_shutdown(struct pci_dev *pdev)
 }
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
+
+static irqreturn_t e1000_intr_msix(int irq, void *data)
+{
+	struct net_device *netdev = data;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	int vector, msix_irq;
+
+	if (adapter->msix_entries) {
+		vector = 0;
+		msix_irq = adapter->msix_entries[vector].vector;
+		disable_irq(msix_irq);
+		e1000_intr_msix_rx(msix_irq, netdev);
+		enable_irq(msix_irq);
+
+		vector++;
+		msix_irq = adapter->msix_entries[vector].vector;
+		disable_irq(msix_irq);
+		e1000_intr_msix_tx(msix_irq, netdev);
+		enable_irq(msix_irq);
+
+		vector++;
+		msix_irq = adapter->msix_entries[vector].vector;
+		disable_irq(msix_irq);
+		e1000_msix_other(msix_irq, netdev);
+		enable_irq(msix_irq);
+	}
+
+	return IRQ_HANDLED;
+}
+
 /*
  * Polling 'interrupt' - used by things like netconsole to send skbs
  * without having to re-enable interrupts. It's not called while
@@ -5474,10 +5504,21 @@ static void e1000_netpoll(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
+	switch (adapter->int_mode) {
+	case E1000E_INT_MODE_MSIX:
+		e1000_intr_msix(adapter->pdev->irq, netdev);
+		break;
+	case E1000E_INT_MODE_MSI:
+		disable_irq(adapter->pdev->irq);
+		e1000_intr_msi(adapter->pdev->irq, netdev);
+		enable_irq(adapter->pdev->irq);
+		break;
+	default: /* E1000E_INT_MODE_LEGACY */
 		disable_irq(adapter->pdev->irq);
 		e1000_intr(adapter->pdev->irq, netdev);
-
 		enable_irq(adapter->pdev->irq);
+		break;
+	}
 }
 #endif