staging: comedi: adv_pci_dio: separate out PCI-1760 support

The PCI-1760 is board unique. It uses an outgoing/incoming mailbox
programming sequence to access the hardware. The other boards supported
by this driver use simple register mapping. Including support for the
PCI-1760 in this driver just makes it harder to understand.

Separate out the PCI-1760 support into a new driver, adv_pci1760.

Clean up the new driver. The original code had a bunch of CamelCase and
other checkpatch.pl issues.

The code used to access the outgoing/incoming mailboxes was also a bit
awkward with the passing of the arrays for the outgoing and incoming
mailbox bytes. Replace them with two new functions that send a command
and return the feedback data from the command based on the programming
flow chart in the datasheet for the PCI-1760.

The new adv_pci1760 driver also fixes the incomplete timer subdevice.
This subdevice is actually the 2 PWM outputs so the subdevice type
has been changed to COMEDI_SUBD_PWM.

The counter subdevice support was not complete in the original code.
They are also a bit strange since they are up counters connected to
each of the digital inputs. For now that subdevice has been disabled
(COMEDI_SUBD_UNUSED).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/Kconfig

@@ -772,6 +772,14 @@ config COMEDI_ADV_PCI1724
 	  To compile this driver as a module, choose M here: the module will be
 	  called adv_pci1724.
 
+config COMEDI_ADV_PCI1760
+	tristate "Advantech PCI-1760 support"
+	---help---
+	  Enable support for Advantech PCI-1760 board.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called adv_pci1760.
+
 config COMEDI_ADV_PCI_DIO
 	tristate "Advantech PCI DIO card support"
 	select COMEDI_8254
@@ -779,8 +787,8 @@ config COMEDI_ADV_PCI_DIO
 	---help---
 	  Enable support for Advantech PCI DIO cards
 	  PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U,
-	  PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756,
-	  PCI-1760 and PCI-1762
+	  PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756 and
+	  PCI-1762
 
 	  To compile this driver as a module, choose M here: the module will be
 	  called adv_pci_dio.

drivers/staging/comedi/drivers/Makefile

@@ -81,6 +81,7 @@ obj-$(CONFIG_COMEDI_ADV_PCI1710)	+= adv_pci1710.o
 obj-$(CONFIG_COMEDI_ADV_PCI1720)	+= adv_pci1720.o
 obj-$(CONFIG_COMEDI_ADV_PCI1723)	+= adv_pci1723.o
 obj-$(CONFIG_COMEDI_ADV_PCI1724)	+= adv_pci1724.o
+obj-$(CONFIG_COMEDI_ADV_PCI1760)	+= adv_pci1760.o
 obj-$(CONFIG_COMEDI_ADV_PCI_DIO)	+= adv_pci_dio.o
 obj-$(CONFIG_COMEDI_AMPLC_DIO200_PCI)	+= amplc_dio200_pci.o
 obj-$(CONFIG_COMEDI_AMPLC_PC236_PCI)	+= amplc_pci236.o