Commit 14d7ca5c authored by H. Peter Anvin's avatar H. Peter Anvin

x86: attempt reboot via port CF9 if we have standard PCI ports

Impact: Changes reboot behavior.

If port CF9 seems to be safe to touch, attempt it before trying the
keyboard controller.  Port CF9 is not available on all chipsets (a
significant but decreasing number of modern chipsets don't implement
it), but port CF9 itself should in general be safe to poke (no ill
effects if unimplemented) on any system which has PCI Configuration
Method #1 or #2, as it falls inside the PCI configuration port range
in both cases.  No chipset without PCI is known to have port CF9,
either, although an explicit "pci=bios" would mean we miss this and
therefore don't use port CF9.  An explicit "reboot=pci" can be used to
force the use of port CF9.
Signed-off-by: default avatarH. Peter Anvin <hpa@zytor.com>
parent d3ec5cae
......@@ -8,7 +8,9 @@ enum reboot_type {
BOOT_BIOS = 'b',
#endif
BOOT_ACPI = 'a',
BOOT_EFI = 'e'
BOOT_EFI = 'e',
BOOT_CF9 = 'p',
BOOT_CF9_COND = 'q',
};
extern enum reboot_type reboot_type;
......
......@@ -29,14 +29,17 @@ EXPORT_SYMBOL(pm_power_off);
static const struct desc_ptr no_idt = {};
static int reboot_mode;
enum reboot_type reboot_type = BOOT_KBD;
enum reboot_type reboot_type = BOOT_CF9_COND;
int reboot_force;
#if defined(CONFIG_X86_32) && defined(CONFIG_SMP)
static int reboot_cpu = -1;
#endif
/* reboot=b[ios] | s[mp] | t[riple] | k[bd] | e[fi] [, [w]arm | [c]old]
/* This is set by the PCI code if either type 1 or type 2 PCI is detected */
bool port_cf9_safe = false;
/* reboot=b[ios] | s[mp] | t[riple] | k[bd] | e[fi] [, [w]arm | [c]old] | p[ci]
warm Don't set the cold reboot flag
cold Set the cold reboot flag
bios Reboot by jumping through the BIOS (only for X86_32)
......@@ -45,6 +48,7 @@ static int reboot_cpu = -1;
kbd Use the keyboard controller. cold reset (default)
acpi Use the RESET_REG in the FADT
efi Use efi reset_system runtime service
pci Use the so-called "PCI reset register", CF9
force Avoid anything that could hang.
*/
static int __init reboot_setup(char *str)
......@@ -79,6 +83,7 @@ static int __init reboot_setup(char *str)
case 'k':
case 't':
case 'e':
case 'p':
reboot_type = *str;
break;
......@@ -379,28 +384,43 @@ static void native_machine_emergency_restart(void)
load_idt(&no_idt);
__asm__ __volatile__("int3");
reboot_type = BOOT_KBD;
reboot_type = BOOT_CF9_COND;
break;
#ifdef CONFIG_X86_32
case BOOT_BIOS:
machine_real_restart(jump_to_bios, sizeof(jump_to_bios));
reboot_type = BOOT_KBD;
reboot_type = BOOT_CF9_COND;
break;
#endif
case BOOT_ACPI:
acpi_reboot();
reboot_type = BOOT_KBD;
reboot_type = BOOT_CF9_COND;
break;
case BOOT_EFI:
if (efi_enabled)
efi.reset_system(reboot_mode ? EFI_RESET_WARM : EFI_RESET_COLD,
efi.reset_system(reboot_mode ?
EFI_RESET_WARM :
EFI_RESET_COLD,
EFI_SUCCESS, 0, NULL);
reboot_type = BOOT_CF9_COND;
break;
case BOOT_CF9:
port_cf9_safe = true;
/* fall through */
case BOOT_CF9_COND:
if (port_cf9_safe) {
u8 cf9 = inb(0xcf9) & ~6;
outb(cf9|2, 0xcf9); /* Request hard reset */
udelay(50);
outb(cf9|6, 0xcf9); /* Actually do the reset */
udelay(50);
}
reboot_type = BOOT_KBD;
break;
}
......
......@@ -173,7 +173,7 @@ static int pci_conf2_write(unsigned int seg, unsigned int bus,
#undef PCI_CONF2_ADDRESS
static struct pci_raw_ops pci_direct_conf2 = {
struct pci_raw_ops pci_direct_conf2 = {
.read = pci_conf2_read,
.write = pci_conf2_write,
};
......@@ -289,6 +289,7 @@ int __init pci_direct_probe(void)
if (pci_check_type1()) {
raw_pci_ops = &pci_direct_conf1;
port_cf9_safe = true;
return 1;
}
release_resource(region);
......@@ -305,6 +306,7 @@ int __init pci_direct_probe(void)
if (pci_check_type2()) {
raw_pci_ops = &pci_direct_conf2;
port_cf9_safe = true;
return 2;
}
......
......@@ -96,6 +96,7 @@ extern struct pci_raw_ops *raw_pci_ops;
extern struct pci_raw_ops *raw_pci_ext_ops;
extern struct pci_raw_ops pci_direct_conf1;
extern bool port_cf9_safe;
/* arch_initcall level */
extern int pci_direct_probe(void);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment