Commit 14d7e487 authored by David S. Miller's avatar David S. Miller

Merge branch 'w5100-small-changes'

Akinobu Mita says:

====================
net: w5100: collection of small changes

This patch series is the collection of relatively small changes for
w5100 driver which includes a cleanup with no functional change,
two fixes, and adding a functionality.

* Changes from v1
- Remove the watchdong_timeo assignment to set default tx timeout,
  suggested by David Miller.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents b0456b24 c3875ca7
......@@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/of_net.h>
#include <linux/spi/spi.h>
#include "w5100.h"
......@@ -414,6 +415,7 @@ static int w5100_spi_probe(struct spi_device *spi)
const struct spi_device_id *id = spi_get_device_id(spi);
const struct w5100_ops *ops;
int priv_size;
const void *mac = of_get_mac_address(spi->dev.of_node);
switch (id->driver_data) {
case W5100:
......@@ -432,7 +434,7 @@ static int w5100_spi_probe(struct spi_device *spi)
return -EINVAL;
}
return w5100_probe(&spi->dev, ops, priv_size, NULL, spi->irq, -EINVAL);
return w5100_probe(&spi->dev, ops, priv_size, mac, spi->irq, -EINVAL);
}
static int w5100_spi_remove(struct spi_device *spi)
......
......@@ -63,8 +63,9 @@ MODULE_LICENSE("GPL");
#define S0_REGS(priv) ((priv)->s0_regs)
#define W5100_S0_MR(priv) (S0_REGS(priv) + W5100_Sn_MR)
#define S0_MR_MACRAW 0x04 /* MAC RAW mode (promiscuous) */
#define S0_MR_MACRAW_MF 0x44 /* MAC RAW mode (filtered) */
#define S0_MR_MACRAW 0x04 /* MAC RAW mode */
#define S0_MR_MF 0x40 /* MAC Filter for W5100 and W5200 */
#define W5500_S0_MR_MF 0x80 /* MAC Filter for W5500 */
#define W5100_S0_CR(priv) (S0_REGS(priv) + W5100_Sn_CR)
#define S0_CR_OPEN 0x01 /* OPEN command */
#define S0_CR_CLOSE 0x10 /* CLOSE command */
......@@ -173,11 +174,6 @@ struct w5100_priv {
struct work_struct restart_work;
};
static inline bool is_w5200(struct w5100_priv *priv)
{
return priv->ops->chip_id == W5200;
}
/************************************************************************
*
* Lowlevel I/O functions
......@@ -707,8 +703,16 @@ static int w5100_hw_reset(struct w5100_priv *priv)
static void w5100_hw_start(struct w5100_priv *priv)
{
w5100_write(priv, W5100_S0_MR(priv), priv->promisc ?
S0_MR_MACRAW : S0_MR_MACRAW_MF);
u8 mode = S0_MR_MACRAW;
if (!priv->promisc) {
if (priv->ops->chip_id == W5500)
mode |= W5500_S0_MR_MF;
else
mode |= S0_MR_MF;
}
w5100_write(priv, W5100_S0_MR(priv), mode);
w5100_command(priv, S0_CR_OPEN);
w5100_enable_intr(priv);
}
......@@ -1048,7 +1052,7 @@ static const struct net_device_ops w5100_netdev_ops = {
static int w5100_mmio_probe(struct platform_device *pdev)
{
struct wiznet_platform_data *data = dev_get_platdata(&pdev->dev);
u8 *mac_addr = NULL;
const void *mac_addr = NULL;
struct resource *mem;
const struct w5100_ops *ops;
int irq;
......@@ -1083,7 +1087,8 @@ void *w5100_ops_priv(const struct net_device *ndev)
EXPORT_SYMBOL_GPL(w5100_ops_priv);
int w5100_probe(struct device *dev, const struct w5100_ops *ops,
int sizeof_ops_priv, u8 *mac_addr, int irq, int link_gpio)
int sizeof_ops_priv, const void *mac_addr, int irq,
int link_gpio)
{
struct w5100_priv *priv;
struct net_device *ndev;
......@@ -1138,7 +1143,6 @@ int w5100_probe(struct device *dev, const struct w5100_ops *ops,
ndev->netdev_ops = &w5100_netdev_ops;
ndev->ethtool_ops = &w5100_ethtool_ops;
ndev->watchdog_timeo = HZ;
netif_napi_add(ndev, &priv->napi, w5100_napi_poll, 16);
/* This chip doesn't support VLAN packets with normal MTU,
......
......@@ -30,7 +30,8 @@ struct w5100_ops {
void *w5100_ops_priv(const struct net_device *ndev);
int w5100_probe(struct device *dev, const struct w5100_ops *ops,
int sizeof_ops_priv, u8 *mac_addr, int irq, int link_gpio);
int sizeof_ops_priv, const void *mac_addr, int irq,
int link_gpio);
int w5100_remove(struct device *dev);
extern const struct dev_pm_ops w5100_pm_ops;
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment