Skip to content

L
linux
Commit 15090390 authored by Alexandre Belloni's avatar Alexandre Belloni
Browse files
Options

ARM: dts: at91: at91sam9g45: switch to new clock bindings 

Switch at91sam9g45 boards to the new PMC clock bindings.

Link: https://lore.kernel.org/r/20200117210619.17768-1-alexandre.belloni@bootlin.comSigned-off-by: default avatarAlexandre Belloni <alexandre.belloni@bootlin.com>
parent 82a5df83
Show whitespace changes
Inline Side-by-side
Showing with 40 additions and 302 deletions
arch/arm/boot/dts/at91sam9g45.dtsi
View file @ 15090390
...@@ -103,14 +103,14 @@ aic: interrupt-controller@fffff000 { ...@@ -103,14 +103,14 @@ aic: interrupt-controller@fffff000 {
ramc0: ramc@ffffe400 { ramc0: ramc@ffffe400 {
compatible = "atmel,at91sam9g45-ddramc"; compatible = "atmel,at91sam9g45-ddramc";
reg = <0xffffe400 0x200>; reg = <0xffffe400 0x200>;
clocks = <&ddrck>; clocks = <&pmc PMC_TYPE_SYSTEM 2>;
clock-names = "ddrck"; clock-names = "ddrck";
}; };
ramc1: ramc@ffffe600 { ramc1: ramc@ffffe600 {
compatible = "atmel,at91sam9g45-ddramc"; compatible = "atmel,at91sam9g45-ddramc";
reg = <0xffffe600 0x200>; reg = <0xffffe600 0x200>;
clocks = <&ddrck>; clocks = <&pmc PMC_TYPE_SYSTEM 2>;
clock-names = "ddrck"; clock-names = "ddrck";
}; };
...@@ -128,271 +128,9 @@ pmc: pmc@fffffc00 { ...@@ -128,271 +128,9 @@ pmc: pmc@fffffc00 {
compatible = "atmel,at91sam9g45-pmc", "syscon"; compatible = "atmel,at91sam9g45-pmc", "syscon";
reg = <0xfffffc00 0x100>; reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller; #clock-cells = <2>;
#address-cells = <1>; clocks = <&clk32k>, <&main_xtal>;
#size-cells = <0>; clock-names = "slow_clk", "main_xtal";
#interrupt-cells = <1>;
main_osc: main_osc {
compatible = "atmel,at91rm9200-clk-main-osc";
#clock-cells = <0>;
interrupts-extended = <&pmc AT91_PMC_MOSCS>;
clocks = <&main_xtal>;
};
main: mainck {
compatible = "atmel,at91rm9200-clk-main";
#clock-cells = <0>;
clocks = <&main_osc>;
};
plla: pllack {
compatible = "atmel,at91rm9200-clk-pll";
#clock-cells = <0>;
interrupts-extended = <&pmc AT91_PMC_LOCKA>;
clocks = <&main>;
reg = <0>;
atmel,clk-input-range = <2000000 32000000>;
#atmel,pll-clk-output-range-cells = <4>;
atmel,pll-clk-output-ranges = <745000000 800000000 0 0
695000000 750000000 1 0
645000000 700000000 2 0
595000000 650000000 3 0
545000000 600000000 0 1
495000000 555000000 1 1
445000000 500000000 2 1
400000000 450000000 3 1>;
};
plladiv: plladivck {
compatible = "atmel,at91sam9x5-clk-plldiv";
#clock-cells = <0>;
clocks = <&plla>;
};
utmi: utmick {
compatible = "atmel,at91sam9x5-clk-utmi";
#clock-cells = <0>;
interrupts-extended = <&pmc AT91_PMC_LOCKU>;
clocks = <&main>;
};
mck: masterck {
compatible = "atmel,at91rm9200-clk-master";
#clock-cells = <0>;
interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
atmel,clk-output-range = <0 133333333>;
atmel,clk-divisors = <1 2 4 3>;
};
usb: usbck {
compatible = "atmel,at91sam9x5-clk-usb";
#clock-cells = <0>;
clocks = <&plladiv>, <&utmi>;
};
prog: progck {
compatible = "atmel,at91sam9g45-clk-programmable";
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&pmc>;
clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
prog0: prog0 {
#clock-cells = <0>;
reg = <0>;
interrupts = <AT91_PMC_PCKRDY(0)>;
};
prog1: prog1 {
#clock-cells = <0>;
reg = <1>;
interrupts = <AT91_PMC_PCKRDY(1)>;
};
};
systemck {
compatible = "atmel,at91rm9200-clk-system";
#address-cells = <1>;
#size-cells = <0>;
ddrck: ddrck {
#clock-cells = <0>;
reg = <2>;
clocks = <&mck>;
};
uhpck: uhpck {
#clock-cells = <0>;
reg = <6>;
clocks = <&usb>;
};
pck0: pck0 {
#clock-cells = <0>;
reg = <8>;
clocks = <&prog0>;
};
pck1: pck1 {
#clock-cells = <0>;
reg = <9>;
clocks = <&prog1>;
};
};
periphck {
compatible = "atmel,at91rm9200-clk-peripheral";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mck>;
pioA_clk: pioA_clk {
#clock-cells = <0>;
reg = <2>;
};
pioB_clk: pioB_clk {
#clock-cells = <0>;
reg = <3>;
};
pioC_clk: pioC_clk {
#clock-cells = <0>;
reg = <4>;
};
pioDE_clk: pioDE_clk {
#clock-cells = <0>;
reg = <5>;
};
trng_clk: trng_clk {
#clock-cells = <0>;
reg = <6>;
};
usart0_clk: usart0_clk {
#clock-cells = <0>;
reg = <7>;
};
usart1_clk: usart1_clk {
#clock-cells = <0>;
reg = <8>;
};
usart2_clk: usart2_clk {
#clock-cells = <0>;
reg = <9>;
};
usart3_clk: usart3_clk {
#clock-cells = <0>;
reg = <10>;
};
mci0_clk: mci0_clk {
#clock-cells = <0>;
reg = <11>;
};
twi0_clk: twi0_clk {
#clock-cells = <0>;
reg = <12>;
};
twi1_clk: twi1_clk {
#clock-cells = <0>;
reg = <13>;
};
spi0_clk: spi0_clk {
#clock-cells = <0>;
reg = <14>;
};
spi1_clk: spi1_clk {
#clock-cells = <0>;
reg = <15>;
};
ssc0_clk: ssc0_clk {
#clock-cells = <0>;
reg = <16>;
};
ssc1_clk: ssc1_clk {
#clock-cells = <0>;
reg = <17>;
};
tcb0_clk: tcb0_clk {
#clock-cells = <0>;
reg = <18>;
};
pwm_clk: pwm_clk {
#clock-cells = <0>;
reg = <19>;
};
adc_clk: adc_clk {
#clock-cells = <0>;
reg = <20>;
};
dma0_clk: dma0_clk {
#clock-cells = <0>;
reg = <21>;
};
uhphs_clk: uhphs_clk {
#clock-cells = <0>;
reg = <22>;
};
lcd_clk: lcd_clk {
#clock-cells = <0>;
reg = <23>;
};
ac97_clk: ac97_clk {
#clock-cells = <0>;
reg = <24>;
};
macb0_clk: macb0_clk {
#clock-cells = <0>;
reg = <25>;
};
isi_clk: isi_clk {
#clock-cells = <0>;
reg = <26>;
};
udphs_clk: udphs_clk {
#clock-cells = <0>;
reg = <27>;
};
aestdessha_clk: aestdessha_clk {
#clock-cells = <0>;
reg = <28>;
};
mci1_clk: mci1_clk {
#clock-cells = <0>;
reg = <29>;
};
vdec_clk: vdec_clk {
#clock-cells = <0>;
reg = <30>;
};
};
}; };
rstc@fffffd00 { rstc@fffffd00 {
...@@ -405,7 +143,7 @@ pit: timer@fffffd30 { ...@@ -405,7 +143,7 @@ pit: timer@fffffd30 {
compatible = "atmel,at91sam9260-pit"; compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>; reg = <0xfffffd30 0xf>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&mck>; clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
}; };
...@@ -421,7 +159,7 @@ tcb0: timer@fff7c000 { ...@@ -421,7 +159,7 @@ tcb0: timer@fff7c000 {
#size-cells = <0>; #size-cells = <0>;
reg = <0xfff7c000 0x100>; reg = <0xfff7c000 0x100>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>; clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
}; };
...@@ -431,7 +169,7 @@ tcb1: timer@fffd4000 { ...@@ -431,7 +169,7 @@ tcb1: timer@fffd4000 {
#size-cells = <0>; #size-cells = <0>;
reg = <0xfffd4000 0x100>; reg = <0xfffd4000 0x100>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>; clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
}; };
...@@ -440,7 +178,7 @@ dma: dma-controller@ffffec00 { ...@@ -440,7 +178,7 @@ dma: dma-controller@ffffec00 {
reg = <0xffffec00 0x200>; reg = <0xffffec00 0x200>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>; #dma-cells = <2>;
clocks = <&dma0_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
clock-names = "dma_clk"; clock-names = "dma_clk";
}; };
...@@ -883,7 +621,7 @@ pioA: gpio@fffff200 { ...@@ -883,7 +621,7 @@ pioA: gpio@fffff200 {
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
clocks = <&pioA_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
}; };
pioB: gpio@fffff400 { pioB: gpio@fffff400 {
...@@ -894,7 +632,7 @@ pioB: gpio@fffff400 { ...@@ -894,7 +632,7 @@ pioB: gpio@fffff400 {
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
clocks = <&pioB_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
}; };
pioC: gpio@fffff600 { pioC: gpio@fffff600 {
...@@ -905,7 +643,7 @@ pioC: gpio@fffff600 { ...@@ -905,7 +643,7 @@ pioC: gpio@fffff600 {
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
clocks = <&pioC_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
}; };
pioD: gpio@fffff800 { pioD: gpio@fffff800 {
...@@ -916,7 +654,7 @@ pioD: gpio@fffff800 { ...@@ -916,7 +654,7 @@ pioD: gpio@fffff800 {
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
clocks = <&pioDE_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
}; };
pioE: gpio@fffffa00 { pioE: gpio@fffffa00 {
...@@ -927,7 +665,7 @@ pioE: gpio@fffffa00 { ...@@ -927,7 +665,7 @@ pioE: gpio@fffffa00 {
gpio-controller; gpio-controller;
interrupt-controller; interrupt-controller;
#interrupt-cells = <2>; #interrupt-cells = <2>;
clocks = <&pioDE_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
}; };
}; };
...@@ -937,7 +675,7 @@ dbgu: serial@ffffee00 { ...@@ -937,7 +675,7 @@ dbgu: serial@ffffee00 {
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>; pinctrl-0 = <&pinctrl_dbgu>;
clocks = <&mck>; clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
clock-names = "usart"; clock-names = "usart";
status = "disabled"; status = "disabled";
}; };
...@@ -950,7 +688,7 @@ usart0: serial@fff8c000 { ...@@ -950,7 +688,7 @@ usart0: serial@fff8c000 {
atmel,use-dma-tx; atmel,use-dma-tx;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>; pinctrl-0 = <&pinctrl_usart0>;
clocks = <&usart0_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
clock-names = "usart"; clock-names = "usart";
status = "disabled"; status = "disabled";
}; };
...@@ -963,7 +701,7 @@ usart1: serial@fff90000 { ...@@ -963,7 +701,7 @@ usart1: serial@fff90000 {
atmel,use-dma-tx; atmel,use-dma-tx;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>; pinctrl-0 = <&pinctrl_usart1>;
clocks = <&usart1_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
clock-names = "usart"; clock-names = "usart";
status = "disabled"; status = "disabled";
}; };
...@@ -976,7 +714,7 @@ usart2: serial@fff94000 { ...@@ -976,7 +714,7 @@ usart2: serial@fff94000 {
atmel,use-dma-tx; atmel,use-dma-tx;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>; pinctrl-0 = <&pinctrl_usart2>;
clocks = <&usart2_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
clock-names = "usart"; clock-names = "usart";
status = "disabled"; status = "disabled";
}; };
...@@ -989,7 +727,7 @@ usart3: serial@fff98000 { ...@@ -989,7 +727,7 @@ usart3: serial@fff98000 {
atmel,use-dma-tx; atmel,use-dma-tx;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>; pinctrl-0 = <&pinctrl_usart3>;
clocks = <&usart3_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
clock-names = "usart"; clock-names = "usart";
status = "disabled"; status = "disabled";
}; };
...@@ -1000,7 +738,7 @@ macb0: ethernet@fffbc000 { ...@@ -1000,7 +738,7 @@ macb0: ethernet@fffbc000 {
interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>; pinctrl-0 = <&pinctrl_macb_rmii>;
clocks = <&macb0_clk>, <&macb0_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_PERIPHERAL 25>;
clock-names = "hclk", "pclk"; clock-names = "hclk", "pclk";
status = "disabled"; status = "disabled";
}; };
...@@ -1009,7 +747,7 @@ trng@fffcc000 { ...@@ -1009,7 +747,7 @@ trng@fffcc000 {
compatible = "atmel,at91sam9g45-trng"; compatible = "atmel,at91sam9g45-trng";
reg = <0xfffcc000 0x100>; reg = <0xfffcc000 0x100>;
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&trng_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
}; };
i2c0: i2c@fff84000 { i2c0: i2c@fff84000 {
...@@ -1020,7 +758,7 @@ i2c0: i2c@fff84000 { ...@@ -1020,7 +758,7 @@ i2c0: i2c@fff84000 {
pinctrl-0 = <&pinctrl_i2c0>; pinctrl-0 = <&pinctrl_i2c0>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
clocks = <&twi0_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
status = "disabled"; status = "disabled";
}; };
...@@ -1032,7 +770,7 @@ i2c1: i2c@fff88000 { ...@@ -1032,7 +770,7 @@ i2c1: i2c@fff88000 {
pinctrl-0 = <&pinctrl_i2c1>; pinctrl-0 = <&pinctrl_i2c1>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
clocks = <&twi1_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
status = "disabled"; status = "disabled";
}; };
...@@ -1042,7 +780,7 @@ ssc0: ssc@fff9c000 { ...@@ -1042,7 +780,7 @@ ssc0: ssc@fff9c000 {
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
clocks = <&ssc0_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
clock-names = "pclk"; clock-names = "pclk";
status = "disabled"; status = "disabled";
}; };
...@@ -1053,7 +791,7 @@ ssc1: ssc@fffa0000 { ...@@ -1053,7 +791,7 @@ ssc1: ssc@fffa0000 {
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
clocks = <&ssc1_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
clock-names = "pclk"; clock-names = "pclk";
status = "disabled"; status = "disabled";
}; };
...@@ -1064,7 +802,7 @@ ac97: sound@fffac000 { ...@@ -1064,7 +802,7 @@ ac97: sound@fffac000 {
interrupts = <24 IRQ_TYPE_LEVEL_HIGH 4>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 4>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ac97>; pinctrl-0 = <&pinctrl_ac97>;
clocks = <&ac97_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
clock-names = "ac97_clk"; clock-names = "ac97_clk";
status = "disabled"; status = "disabled";
}; };
...@@ -1075,7 +813,7 @@ adc0: adc@fffb0000 { ...@@ -1075,7 +813,7 @@ adc0: adc@fffb0000 {
compatible = "atmel,at91sam9g45-adc"; compatible = "atmel,at91sam9g45-adc";
reg = <0xfffb0000 0x100>; reg = <0xfffb0000 0x100>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&adc_clk>, <&adc_op_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&adc_op_clk>;
clock-names = "adc_clk", "adc_op_clk"; clock-names = "adc_clk", "adc_op_clk";
atmel,adc-channels-used = <0xff>; atmel,adc-channels-used = <0xff>;
atmel,adc-vref = <3300>; atmel,adc-vref = <3300>;
...@@ -1111,7 +849,7 @@ isi@fffb4000 { ...@@ -1111,7 +849,7 @@ isi@fffb4000 {
compatible = "atmel,at91sam9g45-isi"; compatible = "atmel,at91sam9g45-isi";
reg = <0xfffb4000 0x4000>; reg = <0xfffb4000 0x4000>;
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>;
clocks = <&isi_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
clock-names = "isi_clk"; clock-names = "isi_clk";
status = "disabled"; status = "disabled";
port { port {
...@@ -1125,7 +863,7 @@ pwm0: pwm@fffb8000 { ...@@ -1125,7 +863,7 @@ pwm0: pwm@fffb8000 {
reg = <0xfffb8000 0x300>; reg = <0xfffb8000 0x300>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
#pwm-cells = <3>; #pwm-cells = <3>;
clocks = <&pwm_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
status = "disabled"; status = "disabled";
}; };
...@@ -1138,7 +876,7 @@ mmc0: mmc@fff80000 { ...@@ -1138,7 +876,7 @@ mmc0: mmc@fff80000 {
dma-names = "rxtx"; dma-names = "rxtx";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
clocks = <&mci0_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
clock-names = "mci_clk"; clock-names = "mci_clk";
status = "disabled"; status = "disabled";
}; };
...@@ -1152,7 +890,7 @@ mmc1: mmc@fffd0000 { ...@@ -1152,7 +890,7 @@ mmc1: mmc@fffd0000 {
dma-names = "rxtx"; dma-names = "rxtx";
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
clocks = <&mci1_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
clock-names = "mci_clk"; clock-names = "mci_clk";
status = "disabled"; status = "disabled";
}; };
...@@ -1176,7 +914,7 @@ spi0: spi@fffa4000 { ...@@ -1176,7 +914,7 @@ spi0: spi@fffa4000 {
interrupts = <14 4 3>; interrupts = <14 4 3>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>; pinctrl-0 = <&pinctrl_spi0>;
clocks = <&spi0_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
clock-names = "spi_clk"; clock-names = "spi_clk";
status = "disabled"; status = "disabled";
}; };
...@@ -1189,7 +927,7 @@ spi1: spi@fffa8000 { ...@@ -1189,7 +927,7 @@ spi1: spi@fffa8000 {
interrupts = <15 4 3>; interrupts = <15 4 3>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>; pinctrl-0 = <&pinctrl_spi1>;
clocks = <&spi1_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
clock-names = "spi_clk"; clock-names = "spi_clk";
status = "disabled"; status = "disabled";
}; };
...@@ -1201,7 +939,7 @@ usb2: gadget@fff78000 { ...@@ -1201,7 +939,7 @@ usb2: gadget@fff78000 {
reg = <0x00600000 0x80000 reg = <0x00600000 0x80000
0xfff78000 0x400>; 0xfff78000 0x400>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&udphs_clk>, <&utmi>; clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
clock-names = "pclk", "hclk"; clock-names = "pclk", "hclk";
status = "disabled"; status = "disabled";
...@@ -1294,7 +1032,7 @@ fb0: fb@500000 { ...@@ -1294,7 +1032,7 @@ fb0: fb@500000 {
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fb>; pinctrl-0 = <&pinctrl_fb>;
clocks = <&lcd_clk>, <&lcd_clk>; clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>;
clock-names = "hclk", "lcdc_clk"; clock-names = "hclk", "lcdc_clk";
status = "disabled"; status = "disabled";
}; };
...@@ -1303,7 +1041,7 @@ usb0: ohci@700000 { ...@@ -1303,7 +1041,7 @@ usb0: ohci@700000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci"; compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00700000 0x100000>; reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
clock-names = "ohci_clk", "hclk", "uhpck"; clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled"; status = "disabled";
}; };
...@@ -1312,7 +1050,7 @@ usb1: ehci@800000 { ...@@ -1312,7 +1050,7 @@ usb1: ehci@800000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>; reg = <0x00800000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&utmi>, <&uhphs_clk>; clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
clock-names = "usb_clk", "ehci_clk"; clock-names = "usb_clk", "ehci_clk";
status = "disabled"; status = "disabled";
}; };
...@@ -1330,7 +1068,7 @@ ebi: ebi@10000000 { ...@@ -1330,7 +1068,7 @@ ebi: ebi@10000000 {
0x3 0x0 0x40000000 0x10000000 0x3 0x0 0x40000000 0x10000000
0x4 0x0 0x50000000 0x10000000 0x4 0x0 0x50000000 0x10000000
0x5 0x0 0x60000000 0x10000000>; 0x5 0x0 0x60000000 0x10000000>;
clocks = <&mck>; clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
status = "disabled"; status = "disabled";
nand_controller: nand-controller { nand_controller: nand-controller {
......
arch/arm/boot/dts/at91sam9m10g45ek.dts
View file @ 15090390
...@@ -72,9 +72,9 @@ ov2640: camera@30 { ...@@ -72,9 +72,9 @@ ov2640: camera@30 {
pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>; resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>;
pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>; pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>;
clocks = <&pck1>; clocks = <&pmc PMC_TYPE_SYSTEM 9>;
clock-names = "xvclk"; clock-names = "xvclk";
assigned-clocks = <&pck1>; assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
assigned-clock-rates = <25000000>; assigned-clock-rates = <25000000>;
port { port {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7