Commit 1579c7b9 authored by Martin Fuzzey's avatar Martin Fuzzey Committed by Shawn Guo

ARM: imx53: Set DDR pins to high impedance when in suspend to RAM.

In order to save power the DDR pins should be put into high
impedance when in suspend to RAM.

This requires manually requesting self refresh (rather than using the
automatic mode implemented by the CCM / ESDCTL), followed by
reconfiguring the IOMUXC.

Of course the code to do this cannot itself run from DDR so the
code is copied to and executed from internal memory.

In my tests using a custom i.MX53 board with LPDDR2 RAM
this reduced the suspend power consumption from 200mW to 60mW.
Signed-off-by: default avatarMartin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent 5739b919
......@@ -90,6 +90,7 @@ obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o
ifeq ($(CONFIG_SUSPEND),y)
AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
endif
obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
......
......@@ -116,9 +116,13 @@ int imx_cpu_kill(unsigned int cpu);
#ifdef CONFIG_SUSPEND
void v7_cpu_resume(void);
void imx53_suspend(void __iomem *ocram_vbase);
extern const u32 imx53_suspend_sz;
void imx6_suspend(void __iomem *ocram_vbase);
#else
static inline void v7_cpu_resume(void) {}
static inline void imx53_suspend(void __iomem *ocram_vbase) {}
static const u32 imx53_suspend_sz;
static inline void imx6_suspend(void __iomem *ocram_vbase) {}
#endif
......
......@@ -13,7 +13,14 @@
#include <linux/io.h>
#include <linux/err.h>
#include <linux/export.h>
#include <linux/genalloc.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <asm/cacheflush.h>
#include <asm/fncpy.h>
#include <asm/system_misc.h>
#include <asm/tlbflush.h>
......@@ -49,10 +56,50 @@
*/
#define IMX5_DEFAULT_CPU_IDLE_STATE WAIT_UNCLOCKED_POWER_OFF
struct imx5_suspend_io_state {
u32 offset;
u32 clear;
u32 set;
u32 saved_value;
};
struct imx5_pm_data {
phys_addr_t ccm_addr;
phys_addr_t cortex_addr;
phys_addr_t gpc_addr;
phys_addr_t m4if_addr;
phys_addr_t iomuxc_addr;
void (*suspend_asm)(void __iomem *ocram_vbase);
const u32 *suspend_asm_sz;
const struct imx5_suspend_io_state *suspend_io_config;
int suspend_io_count;
};
static const struct imx5_suspend_io_state imx53_suspend_io_config[] = {
#define MX53_DSE_HIGHZ_MASK (0x7 << 19)
{.offset = 0x584, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM0 */
{.offset = 0x594, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM1 */
{.offset = 0x560, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM2 */
{.offset = 0x554, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM3 */
{.offset = 0x574, .clear = MX53_DSE_HIGHZ_MASK}, /* CAS */
{.offset = 0x588, .clear = MX53_DSE_HIGHZ_MASK}, /* RAS */
{.offset = 0x578, .clear = MX53_DSE_HIGHZ_MASK}, /* SDCLK_0 */
{.offset = 0x570, .clear = MX53_DSE_HIGHZ_MASK}, /* SDCLK_1 */
{.offset = 0x580, .clear = MX53_DSE_HIGHZ_MASK}, /* SDODT0 */
{.offset = 0x564, .clear = MX53_DSE_HIGHZ_MASK}, /* SDODT1 */
{.offset = 0x57c, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS0 */
{.offset = 0x590, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS1 */
{.offset = 0x568, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS2 */
{.offset = 0x558, .clear = MX53_DSE_HIGHZ_MASK}, /* SDSQ3 */
{.offset = 0x6f0, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_ADDS */
{.offset = 0x718, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_BODS */
{.offset = 0x71c, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B1DS */
{.offset = 0x728, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B2DS */
{.offset = 0x72c, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B3DS */
/* Controls the CKE signal which is required to leave self refresh */
{.offset = 0x720, .clear = MX53_DSE_HIGHZ_MASK, .set = 1 << 19}, /* CTLDS */
};
static const struct imx5_pm_data imx51_pm_data __initconst = {
......@@ -65,11 +112,35 @@ static const struct imx5_pm_data imx53_pm_data __initconst = {
.ccm_addr = 0x53fd4000,
.cortex_addr = 0x63fa0000,
.gpc_addr = 0x53fd8000,
.m4if_addr = 0x63fd8000,
.iomuxc_addr = 0x53fa8000,
.suspend_asm = &imx53_suspend,
.suspend_asm_sz = &imx53_suspend_sz,
.suspend_io_config = imx53_suspend_io_config,
.suspend_io_count = ARRAY_SIZE(imx53_suspend_io_config),
};
#define MX5_MAX_SUSPEND_IOSTATE ARRAY_SIZE(imx53_suspend_io_config)
/*
* This structure is for passing necessary data for low level ocram
* suspend code(arch/arm/mach-imx/suspend-imx53.S), if this struct
* definition is changed, the offset definition in that file
* must be also changed accordingly otherwise, the suspend to ocram
* function will be broken!
*/
struct imx5_cpu_suspend_info {
void __iomem *m4if_base;
void __iomem *iomuxc_base;
u32 io_count;
struct imx5_suspend_io_state io_state[MX5_MAX_SUSPEND_IOSTATE];
} __aligned(8);
static void __iomem *ccm_base;
static void __iomem *cortex_base;
static void __iomem *gpc_base;
static void __iomem *suspend_ocram_base;
static void (*imx5_suspend_in_ocram_fn)(void __iomem *ocram_vbase);
/*
* set cpu low power mode before WFI instruction. This function is called
......@@ -159,8 +230,15 @@ static int mx5_suspend_enter(suspend_state_t state)
/*clear the EMPGC0/1 bits */
__raw_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
__raw_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
}
if (imx5_suspend_in_ocram_fn)
imx5_suspend_in_ocram_fn(suspend_ocram_base);
else
cpu_do_idle();
} else {
cpu_do_idle();
}
/* return registers to default idle state */
mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
......@@ -192,6 +270,111 @@ static void imx5_pm_idle(void)
imx5_cpu_do_idle();
}
static int __init imx_suspend_alloc_ocram(
size_t size,
void __iomem **virt_out,
phys_addr_t *phys_out)
{
struct device_node *node;
struct platform_device *pdev;
struct gen_pool *ocram_pool;
unsigned long ocram_base;
void __iomem *virt;
phys_addr_t phys;
int ret = 0;
/* Copied from imx6: TODO factorize */
node = of_find_compatible_node(NULL, NULL, "mmio-sram");
if (!node) {
pr_warn("%s: failed to find ocram node!\n", __func__);
return -ENODEV;
}
pdev = of_find_device_by_node(node);
if (!pdev) {
pr_warn("%s: failed to find ocram device!\n", __func__);
ret = -ENODEV;
goto put_node;
}
ocram_pool = dev_get_gen_pool(&pdev->dev);
if (!ocram_pool) {
pr_warn("%s: ocram pool unavailable!\n", __func__);
ret = -ENODEV;
goto put_node;
}
ocram_base = gen_pool_alloc(ocram_pool, size);
if (!ocram_base) {
pr_warn("%s: unable to alloc ocram!\n", __func__);
ret = -ENOMEM;
goto put_node;
}
phys = gen_pool_virt_to_phys(ocram_pool, ocram_base);
virt = __arm_ioremap_exec(phys, size, false);
if (phys_out)
*phys_out = phys;
if (virt_out)
*virt_out = virt;
put_node:
of_node_put(node);
return ret;
}
static int __init imx5_suspend_init(const struct imx5_pm_data *soc_data)
{
struct imx5_cpu_suspend_info *suspend_info;
int ret;
/* Need this to avoid compile error due to const typeof in fncpy.h */
void (*suspend_asm)(void __iomem *) = soc_data->suspend_asm;
if (!suspend_asm)
return 0;
if (!soc_data->suspend_asm_sz || !*soc_data->suspend_asm_sz)
return -EINVAL;
ret = imx_suspend_alloc_ocram(
*soc_data->suspend_asm_sz + sizeof(*suspend_info),
&suspend_ocram_base, NULL);
if (ret)
return ret;
suspend_info = suspend_ocram_base;
suspend_info->io_count = soc_data->suspend_io_count;
memcpy(suspend_info->io_state, soc_data->suspend_io_config,
sizeof(*suspend_info->io_state) * soc_data->suspend_io_count);
suspend_info->m4if_base = ioremap(soc_data->m4if_addr, SZ_16K);
if (!suspend_info->m4if_base) {
ret = -ENOMEM;
goto failed_map_m4if;
}
suspend_info->iomuxc_base = ioremap(soc_data->iomuxc_addr, SZ_16K);
if (!suspend_info->iomuxc_base) {
ret = -ENOMEM;
goto failed_map_iomuxc;
}
imx5_suspend_in_ocram_fn = fncpy(
suspend_ocram_base + sizeof(*suspend_info),
suspend_asm,
*soc_data->suspend_asm_sz);
return 0;
failed_map_iomuxc:
iounmap(suspend_info->m4if_base);
failed_map_m4if:
return ret;
}
static int __init imx5_pm_common_init(const struct imx5_pm_data *data)
{
int ret;
......@@ -218,6 +401,11 @@ static int __init imx5_pm_common_init(const struct imx5_pm_data *data)
if (ret)
pr_warn("%s: cpuidle init failed %d\n", __func__, ret);
ret = imx5_suspend_init(data);
if (ret)
pr_warn("%s: No DDR LPM support with suspend %d!\n",
__func__, ret);
suspend_set_ops(&mx5_suspend_ops);
return 0;
......
/*
* Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
*/
/*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/linkage.h>
#define M4IF_MCR0_OFFSET (0x008C)
#define M4IF_MCR0_FDVFS (0x1 << 11)
#define M4IF_MCR0_FDVACK (0x1 << 27)
.align 3
/*
* ==================== low level suspend ====================
*
* On entry
* r0: pm_info structure address;
*
* suspend ocram space layout:
* ======================== high address ======================
* .
* .
* .
* ^
* ^
* ^
* imx53_suspend code
* PM_INFO structure(imx53_suspend_info)
* ======================== low address =======================
*/
/* Offsets of members of struct imx53_suspend_info */
#define SUSPEND_INFO_MX53_M4IF_V_OFFSET 0x0
#define SUSPEND_INFO_MX53_IOMUXC_V_OFFSET 0x4
#define SUSPEND_INFO_MX53_IO_COUNT_OFFSET 0x8
#define SUSPEND_INFO_MX53_IO_STATE_OFFSET 0xc
ENTRY(imx53_suspend)
stmfd sp!, {r4,r5,r6,r7}
/* Save pad config */
ldr r1, [r0, #SUSPEND_INFO_MX53_IO_COUNT_OFFSET]
cmp r1, #0
beq skip_pad_conf_1
add r2, r0, #SUSPEND_INFO_MX53_IO_STATE_OFFSET
ldr r3, [r0, #SUSPEND_INFO_MX53_IOMUXC_V_OFFSET]
1:
ldr r5, [r2], #12 /* IOMUXC register offset */
ldr r6, [r3, r5] /* current value */
str r6, [r2], #4 /* save area */
subs r1, r1, #1
bne 1b
skip_pad_conf_1:
/* Set FDVFS bit of M4IF_MCR0 to request DDR to enter self-refresh */
ldr r1, [r0, #SUSPEND_INFO_MX53_M4IF_V_OFFSET]
ldr r2,[r1, #M4IF_MCR0_OFFSET]
orr r2, r2, #M4IF_MCR0_FDVFS
str r2,[r1, #M4IF_MCR0_OFFSET]
/* Poll FDVACK bit of M4IF_MCR to wait for DDR to enter self-refresh */
wait_sr_ack:
ldr r2,[r1, #M4IF_MCR0_OFFSET]
ands r2, r2, #M4IF_MCR0_FDVACK
beq wait_sr_ack
/* Set pad config */
ldr r1, [r0, #SUSPEND_INFO_MX53_IO_COUNT_OFFSET]
cmp r1, #0
beq skip_pad_conf_2
add r2, r0, #SUSPEND_INFO_MX53_IO_STATE_OFFSET
ldr r3, [r0, #SUSPEND_INFO_MX53_IOMUXC_V_OFFSET]
2:
ldr r5, [r2], #4 /* IOMUXC register offset */
ldr r6, [r2], #4 /* clear */
ldr r7, [r3, r5]
bic r7, r7, r6
ldr r6, [r2], #8 /* set */
orr r7, r7, r6
str r7, [r3, r5]
subs r1, r1, #1
bne 2b
skip_pad_conf_2:
/* Zzz, enter stop mode */
wfi
nop
nop
nop
nop
/* Restore pad config */
ldr r1, [r0, #SUSPEND_INFO_MX53_IO_COUNT_OFFSET]
cmp r1, #0
beq skip_pad_conf_3
add r2, r0, #SUSPEND_INFO_MX53_IO_STATE_OFFSET
ldr r3, [r0, #SUSPEND_INFO_MX53_IOMUXC_V_OFFSET]
3:
ldr r5, [r2], #12 /* IOMUXC register offset */
ldr r6, [r2], #4 /* saved value */
str r6, [r3, r5]
subs r1, r1, #1
bne 3b
skip_pad_conf_3:
/* Clear FDVFS bit of M4IF_MCR0 to request DDR to exit self-refresh */
ldr r1, [r0, #SUSPEND_INFO_MX53_M4IF_V_OFFSET]
ldr r2,[r1, #M4IF_MCR0_OFFSET]
bic r2, r2, #M4IF_MCR0_FDVFS
str r2,[r1, #M4IF_MCR0_OFFSET]
/* Poll FDVACK bit of M4IF_MCR to wait for DDR to exit self-refresh */
wait_ar_ack:
ldr r2,[r1, #M4IF_MCR0_OFFSET]
ands r2, r2, #M4IF_MCR0_FDVACK
bne wait_ar_ack
/* Restore registers */
ldmfd sp!, {r4,r5,r6,r7}
mov pc, lr
ENDPROC(imx53_suspend)
ENTRY(imx53_suspend_sz)
.word . - imx53_suspend
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment