scsi: libsas: Drop SAS_DPRINTK() and revise logs levels

Like sas_printk() did previously, SAS_DPRINTK() offers little value now
that libsas logs already have the "sas" prefix through pr_fmt(fmt). So it
can be dropped.

However, after reviewing some logs in libsas, it is noticed that debug
level is too low in many instances.

So this change drops SAS_DPRINTK() and revises some logs to a more
appropriate level. However many stay at debug level, although some
are significantly promoted.

We add -DDEBUG for compilation so that we keep the debug messages by
default, as before.

All the pre-existing checkpatch errors for spanning messages across
multiple lines are also fixed.

Finally, all other references to printk() [apart from special formatting
in sas_ata.c] are removed and replaced with appropriate pr_xxx().
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/libsas/Makefile

@@ -32,3 +32,5 @@ libsas-y +=  sas_init.o     \
 		sas_task.o
 libsas-$(CONFIG_SCSI_SAS_ATA) +=	sas_ata.o
 libsas-$(CONFIG_SCSI_SAS_HOST_SMP) +=	sas_host_smp.o
+
+ccflags-y := -DDEBUG

drivers/scsi/libsas/sas_ata.c

@@ -75,7 +75,7 @@ static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts)
 
 		case SAS_OPEN_TO:
 		case SAS_OPEN_REJECT:
-			SAS_DPRINTK("%s: Saw error %d.  What to do?\n",
+			pr_warn("%s: Saw error %d.  What to do?\n",
 				__func__, ts->stat);
 			return AC_ERR_OTHER;
 
@@ -151,8 +151,7 @@ static void sas_ata_task_done(struct sas_task *task)
 	} else {
 		ac = sas_to_ata_err(stat);
 		if (ac) {
-			SAS_DPRINTK("%s: SAS error %x\n", __func__,
-				    stat->stat);
+			pr_warn("%s: SAS error %x\n", __func__, stat->stat);
 			/* We saw a SAS error. Send a vague error. */
 			if (!link->sactive) {
 				qc->err_mask = ac;
@@ -237,7 +236,7 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc)
 
 	ret = i->dft->lldd_execute_task(task, GFP_ATOMIC);
 	if (ret) {
-		SAS_DPRINTK("lldd_execute_task returned: %d\n", ret);
+		pr_debug("lldd_execute_task returned: %d\n", ret);
 
 		if (qc->scsicmd)
 			ASSIGN_SAS_TASK(qc->scsicmd, NULL);
@@ -282,8 +281,8 @@ int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
 		res = sas_get_report_phy_sata(dev->parent, phy->phy_id,
 					      &dev->sata_dev.rps_resp);
 		if (res) {
-			SAS_DPRINTK("report phy sata to %016llx:0x%x returned "
-				    "0x%x\n", SAS_ADDR(dev->parent->sas_addr),
+			pr_debug("report phy sata to %016llx:0x%x returned 0x%x\n",
+				 SAS_ADDR(dev->parent->sas_addr),
 				 phy->phy_id, res);
 			return res;
 		}
@@ -431,8 +430,7 @@ static void sas_ata_internal_abort(struct sas_task *task)
 	if (task->task_state_flags & SAS_TASK_STATE_ABORTED ||
 	    task->task_state_flags & SAS_TASK_STATE_DONE) {
 		spin_unlock_irqrestore(&task->task_state_lock, flags);
-		SAS_DPRINTK("%s: Task %p already finished.\n", __func__,
-			    task);
+		pr_debug("%s: Task %p already finished.\n", __func__, task);
 		goto out;
 	}
 	task->task_state_flags |= SAS_TASK_STATE_ABORTED;
@@ -452,7 +450,7 @@ static void sas_ata_internal_abort(struct sas_task *task)
 	 * aborted ata tasks, otherwise we (likely) leak the sas task
 	 * here
 	 */
-	SAS_DPRINTK("%s: Task %p leaked.\n", __func__, task);
+	pr_warn("%s: Task %p leaked.\n", __func__, task);
 
 	if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
 		task->task_state_flags &= ~SAS_TASK_STATE_ABORTED;
@@ -558,7 +556,7 @@ int sas_ata_init(struct domain_device *found_dev)
 
 	ata_host = kzalloc(sizeof(*ata_host), GFP_KERNEL);
 	if (!ata_host)	{
-		SAS_DPRINTK("ata host alloc failed.\n");
+		pr_err("ata host alloc failed.\n");
 		return -ENOMEM;
 	}
 
@@ -566,7 +564,7 @@ int sas_ata_init(struct domain_device *found_dev)
 
 	ap = ata_sas_port_alloc(ata_host, &sata_port_info, shost);
 	if (!ap) {
-		SAS_DPRINTK("ata_sas_port_alloc failed.\n");
+		pr_err("ata_sas_port_alloc failed.\n");
 		rc = -ENODEV;
 		goto free_host;
 	}

drivers/scsi/libsas/sas_discover.c

@@ -128,7 +128,7 @@ static int sas_get_port_device(struct asd_sas_port *port)
 					  SAS_FANOUT_EXPANDER_DEVICE);
 		break;
 	default:
-		printk("ERROR: Unidentified device type %d\n", dev->dev_type);
+		pr_warn("ERROR: Unidentified device type %d\n", dev->dev_type);
 		rphy = NULL;
 		break;
 	}
@@ -186,8 +186,7 @@ int sas_notify_lldd_dev_found(struct domain_device *dev)
 
 	res = i->dft->lldd_dev_found(dev);
 	if (res) {
-		printk("sas: driver on pcidev %s cannot handle "
-		       "device %llx, error:%d\n",
+		pr_warn("driver on pcidev %s cannot handle device %llx, error:%d\n",
 			dev_name(sas_ha->dev),
 			SAS_ADDR(dev->sas_addr), res);
 	}
@@ -456,7 +455,7 @@ static void sas_discover_domain(struct work_struct *work)
 		return;
 	dev = port->port_dev;
 
-	SAS_DPRINTK("DOING DISCOVERY on port %d, pid:%d\n", port->id,
+	pr_debug("DOING DISCOVERY on port %d, pid:%d\n", port->id,
 		 task_pid_nr(current));
 
 	switch (dev->dev_type) {
@@ -473,12 +472,12 @@ static void sas_discover_domain(struct work_struct *work)
 		error = sas_discover_sata(dev);
 		break;
 #else
-		SAS_DPRINTK("ATA device seen but CONFIG_SCSI_SAS_ATA=N so cannot attach\n");
+		pr_notice("ATA device seen but CONFIG_SCSI_SAS_ATA=N so cannot attach\n");
 		/* Fall through */
 #endif
 	default:
 		error = -ENXIO;
-		SAS_DPRINTK("unhandled device %d\n", dev->dev_type);
+		pr_err("unhandled device %d\n", dev->dev_type);
 		break;
 	}
 
@@ -495,7 +494,7 @@ static void sas_discover_domain(struct work_struct *work)
 
 	sas_probe_devices(port);
 
-	SAS_DPRINTK("DONE DISCOVERY on port %d, pid:%d, result:%d\n", port->id,
+	pr_debug("DONE DISCOVERY on port %d, pid:%d, result:%d\n", port->id,
 		 task_pid_nr(current), error);
 }
 
@@ -510,21 +509,21 @@ static void sas_revalidate_domain(struct work_struct *work)
 	/* prevent revalidation from finding sata links in recovery */
 	mutex_lock(&ha->disco_mutex);
 	if (test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) {
-		SAS_DPRINTK("REVALIDATION DEFERRED on port %d, pid:%d\n",
+		pr_debug("REVALIDATION DEFERRED on port %d, pid:%d\n",
 			 port->id, task_pid_nr(current));
 		goto out;
 	}
 
 	clear_bit(DISCE_REVALIDATE_DOMAIN, &port->disc.pending);
 
-	SAS_DPRINTK("REVALIDATING DOMAIN on port %d, pid:%d\n", port->id,
+	pr_debug("REVALIDATING DOMAIN on port %d, pid:%d\n", port->id,
 		 task_pid_nr(current));
 
 	if (ddev && (ddev->dev_type == SAS_FANOUT_EXPANDER_DEVICE ||
 		     ddev->dev_type == SAS_EDGE_EXPANDER_DEVICE))
 		res = sas_ex_revalidate_domain(ddev);
 
-	SAS_DPRINTK("done REVALIDATING DOMAIN on port %d, pid:%d, res 0x%x\n",
+	pr_debug("done REVALIDATING DOMAIN on port %d, pid:%d, res 0x%x\n",
 		 port->id, task_pid_nr(current), res);
  out:
 	mutex_unlock(&ha->disco_mutex);

drivers/scsi/libsas/sas_init.c

@@ -128,19 +128,19 @@ int sas_register_ha(struct sas_ha_struct *sas_ha)
 
 	error = sas_register_phys(sas_ha);
 	if (error) {
-		printk(KERN_NOTICE "couldn't register sas phys:%d\n", error);
+		pr_notice("couldn't register sas phys:%d\n", error);
 		return error;
 	}
 
 	error = sas_register_ports(sas_ha);
 	if (error) {
-		printk(KERN_NOTICE "couldn't register sas ports:%d\n", error);
+		pr_notice("couldn't register sas ports:%d\n", error);
 		goto Undo_phys;
 	}
 
 	error = sas_init_events(sas_ha);
 	if (error) {
-		printk(KERN_NOTICE "couldn't start event thread:%d\n", error);
+		pr_notice("couldn't start event thread:%d\n", error);
 		goto Undo_ports;
 	}
 

drivers/scsi/libsas/sas_internal.h

@@ -40,9 +40,6 @@
 
 #define pr_fmt(fmt) SAS_FMT fmt
 
-#define SAS_DPRINTK(fmt, ...) printk(KERN_DEBUG fmt, ## __VA_ARGS__)
-
-
 #define TO_SAS_TASK(_scsi_cmd)  ((void *)(_scsi_cmd)->host_scribble)
 #define ASSIGN_SAS_TASK(_sc, _t) do { (_sc)->host_scribble = (void *) _t; } while (0)
 
@@ -127,7 +124,7 @@ static inline void sas_smp_host_handler(struct bsg_job *job,
 
 static inline void sas_fail_probe(struct domain_device *dev, const char *func, int err)
 {
-	SAS_DPRINTK("%s: for %s device %16llx returned %d\n",
+	pr_warn("%s: for %s device %16llx returned %d\n",
 		func, dev->parent ? "exp-attached" :
 		"direct-attached",
 		SAS_ADDR(dev->sas_addr), err);

drivers/scsi/libsas/sas_port.c

@@ -110,7 +110,7 @@ static void sas_form_port(struct asd_sas_phy *phy)
 			wake_up(&sas_ha->eh_wait_q);
 			return;
 		} else {
-			SAS_DPRINTK("%s: phy%d belongs to port%d already(%d)!\n",
+			pr_info("%s: phy%d belongs to port%d already(%d)!\n",
 				__func__, phy->id, phy->port->id,
 				phy->port->num_phys);
 			return;
@@ -125,7 +125,7 @@ static void sas_form_port(struct asd_sas_phy *phy)
 		if (*(u64 *) port->sas_addr &&
 		    phy_is_wideport_member(port, phy) && port->num_phys > 0) {
 			/* wide port */
-			SAS_DPRINTK("phy%d matched wide port%d\n", phy->id,
+			pr_debug("phy%d matched wide port%d\n", phy->id,
 				 port->id);
 			break;
 		}
@@ -147,8 +147,7 @@ static void sas_form_port(struct asd_sas_phy *phy)
 	}
 
 	if (i >= sas_ha->num_phys) {
-		printk(KERN_NOTICE "%s: couldn't find a free port, bug?\n",
-		       __func__);
+		pr_err("%s: couldn't find a free port, bug?\n", __func__);
 		spin_unlock_irqrestore(&sas_ha->phy_port_lock, flags);
 		return;
 	}
@@ -180,7 +179,7 @@ static void sas_form_port(struct asd_sas_phy *phy)
 	}
 	sas_port_add_phy(port->port, phy->phy);
 
-	SAS_DPRINTK("%s added to %s, phy_mask:0x%x (%16llx)\n",
+	pr_debug("%s added to %s, phy_mask:0x%x (%16llx)\n",
 		 dev_name(&phy->phy->dev), dev_name(&port->port->dev),
 		 port->phy_mask,
 		 SAS_ADDR(port->attached_sas_addr));
@@ -279,7 +278,7 @@ void sas_porte_broadcast_rcvd(struct work_struct *work)
 	prim = phy->sas_prim;
 	spin_unlock_irqrestore(&phy->sas_prim_lock, flags);
 
-	SAS_DPRINTK("broadcast received: %d\n", prim);
+	pr_debug("broadcast received: %d\n", prim);
 	sas_discover_event(phy->port, DISCE_REVALIDATE_DOMAIN);
 
 	if (phy->port)

drivers/scsi/libsas/sas_scsi_host.c

@@ -93,8 +93,7 @@ static void sas_end_task(struct scsi_cmnd *sc, struct sas_task *task)
 				hs = DID_ERROR;
 			break;
 		case SAS_PROTO_RESPONSE:
-			SAS_DPRINTK("LLDD:%s sent SAS_PROTO_RESP for an SSP "
-				    "task; please report this\n",
+			pr_notice("LLDD:%s sent SAS_PROTO_RESP for an SSP task; please report this\n",
 				  task->dev->port->ha->sas_ha_name);
 			break;
 		case SAS_ABORTED_TASK:
@@ -132,12 +131,12 @@ static void sas_scsi_task_done(struct sas_task *task)
 
 	if (unlikely(!task)) {
 		/* task will be completed by the error handler */
-		SAS_DPRINTK("task done but aborted\n");
+		pr_debug("task done but aborted\n");
 		return;
 	}
 
 	if (unlikely(!sc)) {
-		SAS_DPRINTK("task_done called with non existing SCSI cmnd!\n");
+		pr_debug("task_done called with non existing SCSI cmnd!\n");
 		sas_free_task(task);
 		return;
 	}
@@ -208,7 +207,7 @@ int sas_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 	return 0;
 
 out_free_task:
-	SAS_DPRINTK("lldd_execute_task returned: %d\n", res);
+	pr_debug("lldd_execute_task returned: %d\n", res);
 	ASSIGN_SAS_TASK(cmd, NULL);
 	sas_free_task(task);
 	if (res == -SAS_QUEUE_FULL)
@@ -301,37 +300,35 @@ static enum task_disposition sas_scsi_find_task(struct sas_task *task)
 		to_sas_internal(task->dev->port->ha->core.shost->transportt);
 
 	for (i = 0; i < 5; i++) {
-		SAS_DPRINTK("%s: aborting task 0x%p\n", __func__, task);
+		pr_notice("%s: aborting task 0x%p\n", __func__, task);
 		res = si->dft->lldd_abort_task(task);
 
 		spin_lock_irqsave(&task->task_state_lock, flags);
 		if (task->task_state_flags & SAS_TASK_STATE_DONE) {
 			spin_unlock_irqrestore(&task->task_state_lock, flags);
-			SAS_DPRINTK("%s: task 0x%p is done\n", __func__,
-				    task);
+			pr_debug("%s: task 0x%p is done\n", __func__, task);
 			return TASK_IS_DONE;
 		}
 		spin_unlock_irqrestore(&task->task_state_lock, flags);
 
 		if (res == TMF_RESP_FUNC_COMPLETE) {
-			SAS_DPRINTK("%s: task 0x%p is aborted\n",
+			pr_notice("%s: task 0x%p is aborted\n",
 				  __func__, task);
 			return TASK_IS_ABORTED;
 		} else if (si->dft->lldd_query_task) {
-			SAS_DPRINTK("%s: querying task 0x%p\n",
-				    __func__, task);
+			pr_notice("%s: querying task 0x%p\n", __func__, task);
 			res = si->dft->lldd_query_task(task);
 			switch (res) {
 			case TMF_RESP_FUNC_SUCC:
-				SAS_DPRINTK("%s: task 0x%p at LU\n",
-					    __func__, task);
+				pr_notice("%s: task 0x%p at LU\n", __func__,
+					  task);
 				return TASK_IS_AT_LU;
 			case TMF_RESP_FUNC_COMPLETE:
-				SAS_DPRINTK("%s: task 0x%p not at LU\n",
+				pr_notice("%s: task 0x%p not at LU\n",
 					  __func__, task);
 				return TASK_IS_NOT_AT_LU;
 			case TMF_RESP_FUNC_FAILED:
-                                SAS_DPRINTK("%s: task 0x%p failed to abort\n",
+				pr_notice("%s: task 0x%p failed to abort\n",
 					  __func__, task);
 				return TASK_ABORT_FAILED;
 			}
@@ -350,7 +347,7 @@ static int sas_recover_lu(struct domain_device *dev, struct scsi_cmnd *cmd)
 
 	int_to_scsilun(cmd->device->lun, &lun);
 
-	SAS_DPRINTK("eh: device %llx LUN %llx has the task\n",
+	pr_notice("eh: device %llx LUN %llx has the task\n",
 		  SAS_ADDR(dev->sas_addr),
 		  cmd->device->lun);
 
@@ -376,7 +373,7 @@ static int sas_recover_I_T(struct domain_device *dev)
 	struct sas_internal *i =
 		to_sas_internal(dev->port->ha->core.shost->transportt);
 
-	SAS_DPRINTK("I_T nexus reset for dev %016llx\n",
+	pr_notice("I_T nexus reset for dev %016llx\n",
 		  SAS_ADDR(dev->sas_addr));
 
 	if (i->dft->lldd_I_T_nexus_reset)
@@ -471,7 +468,7 @@ static int sas_queue_reset(struct domain_device *dev, int reset_type,
 			return SUCCESS;
 	}
 
-	SAS_DPRINTK("%s reset of %s failed\n",
+	pr_warn("%s reset of %s failed\n",
 		reset_type == SAS_DEV_LU_RESET ? "LUN" : "Bus",
 		dev_name(&dev->rphy->dev));
 
@@ -501,7 +498,7 @@ int sas_eh_abort_handler(struct scsi_cmnd *cmd)
 	if (task)
 		res = i->dft->lldd_abort_task(task);
 	else
-		SAS_DPRINTK("no task to abort\n");
+		pr_notice("no task to abort\n");
 	if (res == TMF_RESP_FUNC_SUCC || res == TMF_RESP_FUNC_COMPLETE)
 		return SUCCESS;
 
@@ -612,32 +609,31 @@ static void sas_eh_handle_sas_errors(struct Scsi_Host *shost, struct list_head *
 		spin_unlock_irqrestore(&task->task_state_lock, flags);
 
 		if (need_reset) {
-			SAS_DPRINTK("%s: task 0x%p requests reset\n",
+			pr_notice("%s: task 0x%p requests reset\n",
 				  __func__, task);
 			goto reset;
 		}
 
-		SAS_DPRINTK("trying to find task 0x%p\n", task);
+		pr_debug("trying to find task 0x%p\n", task);
 		res = sas_scsi_find_task(task);
 
 		switch (res) {
 		case TASK_IS_DONE:
-			SAS_DPRINTK("%s: task 0x%p is done\n", __func__,
+			pr_notice("%s: task 0x%p is done\n", __func__,
 				    task);
 			sas_eh_finish_cmd(cmd);
 			continue;
 		case TASK_IS_ABORTED:
-			SAS_DPRINTK("%s: task 0x%p is aborted\n",
+			pr_notice("%s: task 0x%p is aborted\n",
 				  __func__, task);
 			sas_eh_finish_cmd(cmd);
 			continue;
 		case TASK_IS_AT_LU:
-			SAS_DPRINTK("task 0x%p is at LU: lu recover\n", task);
+			pr_info("task 0x%p is at LU: lu recover\n", task);
  reset:
 			tmf_resp = sas_recover_lu(task->dev, cmd);
 			if (tmf_resp == TMF_RESP_FUNC_COMPLETE) {
-				SAS_DPRINTK("dev %016llx LU %llx is "
-					    "recovered\n",
+				pr_notice("dev %016llx LU %llx is recovered\n",
 					  SAS_ADDR(task->dev),
 					  cmd->device->lun);
 				sas_eh_finish_cmd(cmd);
@@ -647,13 +643,13 @@ static void sas_eh_handle_sas_errors(struct Scsi_Host *shost, struct list_head *
 			/* fallthrough */
 		case TASK_IS_NOT_AT_LU:
 		case TASK_ABORT_FAILED:
-			SAS_DPRINTK("task 0x%p is not at LU: I_T recover\n",
+			pr_notice("task 0x%p is not at LU: I_T recover\n",
 				  task);
 			tmf_resp = sas_recover_I_T(task->dev);
 			if (tmf_resp == TMF_RESP_FUNC_COMPLETE ||
 			    tmf_resp == -ENODEV) {
 				struct domain_device *dev = task->dev;
-				SAS_DPRINTK("I_T %016llx recovered\n",
+				pr_notice("I_T %016llx recovered\n",
 					  SAS_ADDR(task->dev->sas_addr));
 				sas_eh_finish_cmd(cmd);
 				sas_scsi_clear_queue_I_T(work_q, dev);
@@ -663,12 +659,12 @@ static void sas_eh_handle_sas_errors(struct Scsi_Host *shost, struct list_head *
 			try_to_reset_cmd_device(cmd);
 			if (i->dft->lldd_clear_nexus_port) {
 				struct asd_sas_port *port = task->dev->port;
-				SAS_DPRINTK("clearing nexus for port:%d\n",
+				pr_debug("clearing nexus for port:%d\n",
 					  port->id);
 				res = i->dft->lldd_clear_nexus_port(port);
 				if (res == TMF_RESP_FUNC_COMPLETE) {
-					SAS_DPRINTK("clear nexus port:%d "
-						    "succeeded\n", port->id);
+					pr_notice("clear nexus port:%d succeeded\n",
+						  port->id);
 					sas_eh_finish_cmd(cmd);
 					sas_scsi_clear_queue_port(work_q,
 								  port);
@@ -676,11 +672,10 @@ static void sas_eh_handle_sas_errors(struct Scsi_Host *shost, struct list_head *
 				}
 			}
 			if (i->dft->lldd_clear_nexus_ha) {
-				SAS_DPRINTK("clear nexus ha\n");
+				pr_debug("clear nexus ha\n");
 				res = i->dft->lldd_clear_nexus_ha(ha);
 				if (res == TMF_RESP_FUNC_COMPLETE) {
-					SAS_DPRINTK("clear nexus ha "
-						    "succeeded\n");
+					pr_notice("clear nexus ha succeeded\n");
 					sas_eh_finish_cmd(cmd);
 					goto clear_q;
 				}
@@ -689,8 +684,7 @@ static void sas_eh_handle_sas_errors(struct Scsi_Host *shost, struct list_head *
 			 * of effort could recover from errors.  Quite
 			 * possibly the HA just disappeared.
 			 */
-			SAS_DPRINTK("error from  device %llx, LUN %llx "
-				    "couldn't be recovered in any way\n",
+			pr_err("error from  device %llx, LUN %llx couldn't be recovered in any way\n",
 			       SAS_ADDR(task->dev->sas_addr),
 			       cmd->device->lun);
 
@@ -704,7 +698,7 @@ static void sas_eh_handle_sas_errors(struct Scsi_Host *shost, struct list_head *
 	return;
 
  clear_q:
-	SAS_DPRINTK("--- Exit %s -- clear_q\n", __func__);
+	pr_debug("--- Exit %s -- clear_q\n", __func__);
 	list_for_each_entry_safe(cmd, n, work_q, eh_entry)
 		sas_eh_finish_cmd(cmd);
 	goto out;
@@ -758,7 +752,7 @@ void sas_scsi_recover_host(struct Scsi_Host *shost)
 	list_splice_init(&shost->eh_cmd_q, &eh_work_q);
 	spin_unlock_irq(shost->host_lock);
 
-	SAS_DPRINTK("Enter %s busy: %d failed: %d\n",
+	pr_notice("Enter %s busy: %d failed: %d\n",
 		  __func__, scsi_host_busy(shost), shost->host_failed);
 	/*
 	 * Deal with commands that still have SAS tasks (i.e. they didn't
@@ -800,7 +794,7 @@ void sas_scsi_recover_host(struct Scsi_Host *shost)
 	if (retry)
 		goto retry;
 
-	SAS_DPRINTK("--- Exit %s: busy: %d failed: %d tries: %d\n",
+	pr_notice("--- Exit %s: busy: %d failed: %d tries: %d\n",
 		  __func__, scsi_host_busy(shost),
 		  shost->host_failed, tries);
 }
@@ -875,9 +869,8 @@ int sas_slave_configure(struct scsi_device *scsi_dev)
 	if (scsi_dev->tagged_supported) {
 		scsi_change_queue_depth(scsi_dev, SAS_DEF_QD);
 	} else {
-		SAS_DPRINTK("device %llx, LUN %llx doesn't support "
-			    "TCQ\n", SAS_ADDR(dev->sas_addr),
-			    scsi_dev->lun);
+		pr_notice("device %llx, LUN %llx doesn't support TCQ\n",
+			  SAS_ADDR(dev->sas_addr), scsi_dev->lun);
 		scsi_change_queue_depth(scsi_dev, 1);
 	}
 

drivers/scsi/libsas/sas_task.c

@@ -26,11 +26,8 @@ void sas_ssp_task_response(struct device *dev, struct sas_task *task,
 		memcpy(tstat->buf, iu->sense_data, tstat->buf_valid_size);
 
 		if (iu->status != SAM_STAT_CHECK_CONDITION)
-			dev_printk(KERN_WARNING, dev,
-				   "dev %llx sent sense data, but "
-				   "stat(%x) is not CHECK CONDITION\n",
-				   SAS_ADDR(task->dev->sas_addr),
-				   iu->status);
+			dev_warn(dev, "dev %llx sent sense data, but stat(%x) is not CHECK CONDITION\n",
+				 SAS_ADDR(task->dev->sas_addr), iu->status);
 	}
 	else
 		/* when datapres contains corrupt/unknown value... */