Commit 1601559b authored by Amit Cohen's avatar Amit Cohen Committed by Jakub Kicinski

mlxsw: Only advertise link modes supported by both driver and device

During port creation the driver instructs the device to advertise all
the supported link modes queried from the device.

Since cited commit not all the link modes supported by the device are
supported by the driver. This can result in the device negotiating a
link mode that is not recognized by the driver causing ethtool to show
an unsupported speed:

$ ethtool swp1
...
Speed: Unknown!

This is especially problematic when the netdev is enslaved to a bond, as
the bond driver uses unknown speed as an indication that the link is
down:

[13048.900895] net_ratelimit: 86 callbacks suppressed
[13048.900902] t_bond0: (slave swp52): failed to get link speed/duplex
[13048.912160] t_bond0: (slave swp49): failed to get link speed/duplex

Fix this by making sure that only link modes that are supported by both
the device and the driver are advertised.

Fixes: b97cd891 ("mlxsw: Remove 56G speed support")
Signed-off-by: default avatarAmit Cohen <amcohen@nvidia.com>
Signed-off-by: default avatarIdo Schimmel <idosch@nvidia.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent 522ee51e
......@@ -1174,11 +1174,14 @@ mlxsw_sp_port_speed_by_width_set(struct mlxsw_sp_port *mlxsw_sp_port)
u32 eth_proto_cap, eth_proto_admin, eth_proto_oper;
const struct mlxsw_sp_port_type_speed_ops *ops;
char ptys_pl[MLXSW_REG_PTYS_LEN];
u32 eth_proto_cap_masked;
int err;
ops = mlxsw_sp->port_type_speed_ops;
/* Set advertised speeds to supported speeds. */
/* Set advertised speeds to speeds supported by both the driver
* and the device.
*/
ops->reg_ptys_eth_pack(mlxsw_sp, ptys_pl, mlxsw_sp_port->local_port,
0, false);
err = mlxsw_reg_query(mlxsw_sp->core, MLXSW_REG(ptys), ptys_pl);
......@@ -1187,8 +1190,10 @@ mlxsw_sp_port_speed_by_width_set(struct mlxsw_sp_port *mlxsw_sp_port)
ops->reg_ptys_eth_unpack(mlxsw_sp, ptys_pl, &eth_proto_cap,
&eth_proto_admin, &eth_proto_oper);
eth_proto_cap_masked = ops->ptys_proto_cap_masked_get(eth_proto_cap);
ops->reg_ptys_eth_pack(mlxsw_sp, ptys_pl, mlxsw_sp_port->local_port,
eth_proto_cap, mlxsw_sp_port->link.autoneg);
eth_proto_cap_masked,
mlxsw_sp_port->link.autoneg);
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ptys), ptys_pl);
}
......
......@@ -342,6 +342,7 @@ struct mlxsw_sp_port_type_speed_ops {
u32 *p_eth_proto_cap,
u32 *p_eth_proto_admin,
u32 *p_eth_proto_oper);
u32 (*ptys_proto_cap_masked_get)(u32 eth_proto_cap);
};
static inline struct net_device *
......
......@@ -1303,6 +1303,20 @@ mlxsw_sp1_reg_ptys_eth_unpack(struct mlxsw_sp *mlxsw_sp, char *payload,
p_eth_proto_oper);
}
static u32 mlxsw_sp1_ptys_proto_cap_masked_get(u32 eth_proto_cap)
{
u32 ptys_proto_cap_masked = 0;
int i;
for (i = 0; i < MLXSW_SP1_PORT_LINK_MODE_LEN; i++) {
if (mlxsw_sp1_port_link_mode[i].mask & eth_proto_cap)
ptys_proto_cap_masked |=
mlxsw_sp1_port_link_mode[i].mask;
}
return ptys_proto_cap_masked;
}
const struct mlxsw_sp_port_type_speed_ops mlxsw_sp1_port_type_speed_ops = {
.from_ptys_supported_port = mlxsw_sp1_from_ptys_supported_port,
.from_ptys_link = mlxsw_sp1_from_ptys_link,
......@@ -1313,6 +1327,7 @@ const struct mlxsw_sp_port_type_speed_ops mlxsw_sp1_port_type_speed_ops = {
.to_ptys_speed = mlxsw_sp1_to_ptys_speed,
.reg_ptys_eth_pack = mlxsw_sp1_reg_ptys_eth_pack,
.reg_ptys_eth_unpack = mlxsw_sp1_reg_ptys_eth_unpack,
.ptys_proto_cap_masked_get = mlxsw_sp1_ptys_proto_cap_masked_get,
};
static const enum ethtool_link_mode_bit_indices
......@@ -1731,6 +1746,20 @@ mlxsw_sp2_reg_ptys_eth_unpack(struct mlxsw_sp *mlxsw_sp, char *payload,
p_eth_proto_admin, p_eth_proto_oper);
}
static u32 mlxsw_sp2_ptys_proto_cap_masked_get(u32 eth_proto_cap)
{
u32 ptys_proto_cap_masked = 0;
int i;
for (i = 0; i < MLXSW_SP2_PORT_LINK_MODE_LEN; i++) {
if (mlxsw_sp2_port_link_mode[i].mask & eth_proto_cap)
ptys_proto_cap_masked |=
mlxsw_sp2_port_link_mode[i].mask;
}
return ptys_proto_cap_masked;
}
const struct mlxsw_sp_port_type_speed_ops mlxsw_sp2_port_type_speed_ops = {
.from_ptys_supported_port = mlxsw_sp2_from_ptys_supported_port,
.from_ptys_link = mlxsw_sp2_from_ptys_link,
......@@ -1741,4 +1770,5 @@ const struct mlxsw_sp_port_type_speed_ops mlxsw_sp2_port_type_speed_ops = {
.to_ptys_speed = mlxsw_sp2_to_ptys_speed,
.reg_ptys_eth_pack = mlxsw_sp2_reg_ptys_eth_pack,
.reg_ptys_eth_unpack = mlxsw_sp2_reg_ptys_eth_unpack,
.ptys_proto_cap_masked_get = mlxsw_sp2_ptys_proto_cap_masked_get,
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment