Merge tag 'fixes-for-3.13a' of...

Merge tag 'fixes-for-3.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First round of fixes for IIO in the 3.13 cycle.

The usual mixed bag of fixes.

* 3 cases where kconfig dependencies were missing.  We need to keep a closer
  eye on this in new drivers.

* hid_sensors was abusing the iio_dev->trigger pointer.  We had a round
  of clearing this out some time ago but this driver clearly slipped through.

* A misuse of the IIO_ST macro, in mcp3422, which we should really make a
  concertive effort to finish removing.

* Avoid a double free introduced by recent buffer reference counting in the
  one driver that (quite reasonably!) does things differently (am335x)

* A missing mutex_unlock in kxsd9 that means that driver has been non
  functional for some time and no one noticed (including me who for once
  actually has one of the supported devices).

* An incorrect assumption about the parameters of sign_extend32 in mcp3422.

So nothing controversial.  The only substantial patch is the hid_sensors
one and that is actually just adding a new pointer to the devices private
state then moving the code over to it.

drivers/iio/accel/hid-sensor-accel-3d.c

@@ -350,7 +350,7 @@ static int hid_accel_3d_probe(struct platform_device *pdev)
 error_iio_unreg:
 	iio_device_unregister(indio_dev);
 error_remove_trigger:
-	hid_sensor_remove_trigger(indio_dev);
+	hid_sensor_remove_trigger(&accel_state->common_attributes);
 error_unreg_buffer_funcs:
 	iio_triggered_buffer_cleanup(indio_dev);
 error_free_dev_mem:
@@ -363,10 +363,11 @@ static int hid_accel_3d_remove(struct platform_device *pdev)
 {
 	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct accel_3d_state *accel_state = iio_priv(indio_dev);
 
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ACCEL_3D);
 	iio_device_unregister(indio_dev);
-	hid_sensor_remove_trigger(indio_dev);
+	hid_sensor_remove_trigger(&accel_state->common_attributes);
 	iio_triggered_buffer_cleanup(indio_dev);
 	kfree(indio_dev->channels);
 

drivers/iio/accel/kxsd9.c

@@ -112,9 +112,10 @@ static int kxsd9_read(struct iio_dev *indio_dev, u8 address)
 	mutex_lock(&st->buf_lock);
 	st->tx[0] = KXSD9_READ(address);
 	ret = spi_sync_transfer(st->us, xfers, ARRAY_SIZE(xfers));
-	if (ret)
+	if (!ret)
+		ret = (((u16)(st->rx[0])) << 8) | (st->rx[1] & 0xF0);
+	mutex_unlock(&st->buf_lock);
 	return ret;
-	return (((u16)(st->rx[0])) << 8) | (st->rx[1] & 0xF0);
 }
 
 static IIO_CONST_ATTR(accel_scale_available,

drivers/iio/adc/at91_adc.c

@@ -1047,6 +1047,7 @@ static int at91_adc_probe(struct platform_device *pdev)
 	} else {
 		if (!st->caps->has_tsmr) {
 			dev_err(&pdev->dev, "We don't support non-TSMR adc\n");
+			ret = -ENODEV;
 			goto error_disable_adc_clk;
 		}
 

drivers/iio/adc/mcp3422.c

@@ -88,10 +88,10 @@ static const int mcp3422_sample_rates[4] = {
 
 /* sample rates to sign extension table */
 static const int mcp3422_sign_extend[4] = {
-	[MCP3422_SRATE_240] = 12,
-	[MCP3422_SRATE_60] = 14,
-	[MCP3422_SRATE_15] = 16,
-	[MCP3422_SRATE_3] = 18 };
+	[MCP3422_SRATE_240] = 11,
+	[MCP3422_SRATE_60] = 13,
+	[MCP3422_SRATE_15] = 15,
+	[MCP3422_SRATE_3] = 17 };
 
 /* Client data (each client gets its own) */
 struct mcp3422 {

drivers/iio/adc/ti_am335x_adc.c

@@ -229,12 +229,15 @@ static int tiadc_iio_buffered_hardware_setup(struct iio_dev *indio_dev,
 	unsigned long flags,
 	const struct iio_buffer_setup_ops *setup_ops)
 {
+	struct iio_buffer *buffer;
 	int ret;
 
-	indio_dev->buffer = iio_kfifo_allocate(indio_dev);
-	if (!indio_dev->buffer)
+	buffer = iio_kfifo_allocate(indio_dev);
+	if (!buffer)
 		return -ENOMEM;
 
+	iio_device_attach_buffer(indio_dev, buffer);
+
 	ret = request_threaded_irq(irq,	pollfunc_th, pollfunc_bh,
 				flags, indio_dev->name, indio_dev);
 	if (ret)

drivers/iio/common/hid-sensors/hid-sensor-trigger.c

@@ -55,11 +55,10 @@ static int hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig,
 	return 0;
 }
 
-void hid_sensor_remove_trigger(struct iio_dev *indio_dev)
+void hid_sensor_remove_trigger(struct hid_sensor_common *attrb)
 {
-	iio_trigger_unregister(indio_dev->trig);
-	iio_trigger_free(indio_dev->trig);
-	indio_dev->trig = NULL;
+	iio_trigger_unregister(attrb->trigger);
+	iio_trigger_free(attrb->trigger);
 }
 EXPORT_SYMBOL(hid_sensor_remove_trigger);
 
@@ -90,7 +89,7 @@ int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
 		dev_err(&indio_dev->dev, "Trigger Register Failed\n");
 		goto error_free_trig;
 	}
-	indio_dev->trig = trig;
+	indio_dev->trig = attrb->trigger = trig;
 
 	return ret;
 

drivers/iio/common/hid-sensors/hid-sensor-trigger.h

@@ -21,6 +21,6 @@
 
 int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
 				struct hid_sensor_common *attrb);
-void hid_sensor_remove_trigger(struct iio_dev *indio_dev);
+void hid_sensor_remove_trigger(struct hid_sensor_common *attrb);
 
 #endif

drivers/iio/gyro/hid-sensor-gyro-3d.c

@@ -348,7 +348,7 @@ static int hid_gyro_3d_probe(struct platform_device *pdev)
 error_iio_unreg:
 	iio_device_unregister(indio_dev);
 error_remove_trigger:
-	hid_sensor_remove_trigger(indio_dev);
+	hid_sensor_remove_trigger(&gyro_state->common_attributes);
 error_unreg_buffer_funcs:
 	iio_triggered_buffer_cleanup(indio_dev);
 error_free_dev_mem:
@@ -361,10 +361,11 @@ static int hid_gyro_3d_remove(struct platform_device *pdev)
 {
 	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
 
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D);
 	iio_device_unregister(indio_dev);
-	hid_sensor_remove_trigger(indio_dev);
+	hid_sensor_remove_trigger(&gyro_state->common_attributes);
 	iio_triggered_buffer_cleanup(indio_dev);
 	kfree(indio_dev->channels);
 

drivers/iio/light/Kconfig

@@ -81,6 +81,8 @@ config SENSORS_LM3533
 config TCS3472
 	tristate "TAOS TCS3472 color light-to-digital converter"
 	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	 If you say yes here you get support for the TAOS TCS3472
 	 family of color light-to-digital converters with IR filter.

drivers/iio/light/hid-sensor-als.c

@@ -314,7 +314,7 @@ static int hid_als_probe(struct platform_device *pdev)
 error_iio_unreg:
 	iio_device_unregister(indio_dev);
 error_remove_trigger:
-	hid_sensor_remove_trigger(indio_dev);
+	hid_sensor_remove_trigger(&als_state->common_attributes);
 error_unreg_buffer_funcs:
 	iio_triggered_buffer_cleanup(indio_dev);
 error_free_dev_mem:
@@ -327,10 +327,11 @@ static int hid_als_remove(struct platform_device *pdev)
 {
 	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct als_state *als_state = iio_priv(indio_dev);
 
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ALS);
 	iio_device_unregister(indio_dev);
-	hid_sensor_remove_trigger(indio_dev);
+	hid_sensor_remove_trigger(&als_state->common_attributes);
 	iio_triggered_buffer_cleanup(indio_dev);
 	kfree(indio_dev->channels);
 

drivers/iio/magnetometer/Kconfig

@@ -19,6 +19,8 @@ config AK8975
 config MAG3110
 	tristate "Freescale MAG3110 3-Axis Magnetometer"
 	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for the Freescale MAG3110 3-Axis
 	  magnetometer.

drivers/iio/magnetometer/hid-sensor-magn-3d.c

@@ -351,7 +351,7 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
 error_iio_unreg:
 	iio_device_unregister(indio_dev);
 error_remove_trigger:
-	hid_sensor_remove_trigger(indio_dev);
+	hid_sensor_remove_trigger(&magn_state->common_attributes);
 error_unreg_buffer_funcs:
 	iio_triggered_buffer_cleanup(indio_dev);
 error_free_dev_mem:
@@ -364,10 +364,11 @@ static int hid_magn_3d_remove(struct platform_device *pdev)
 {
 	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct magn_3d_state *magn_state = iio_priv(indio_dev);
 
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D);
 	iio_device_unregister(indio_dev);
-	hid_sensor_remove_trigger(indio_dev);
+	hid_sensor_remove_trigger(&magn_state->common_attributes);
 	iio_triggered_buffer_cleanup(indio_dev);
 	kfree(indio_dev->channels);
 

drivers/iio/magnetometer/mag3110.c

@@ -250,7 +250,12 @@ static irqreturn_t mag3110_trigger_handler(int irq, void *p)
 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
 		BIT(IIO_CHAN_INFO_SCALE), \
 	.scan_index = idx, \
-	.scan_type = IIO_ST('s', 16, 16, IIO_BE), \
+	.scan_type = { \
+		.sign = 's', \
+		.realbits = 16, \
+		.storagebits = 16, \
+		.endianness = IIO_BE, \
+	}, \
 }
 
 static const struct iio_chan_spec mag3110_channels[] = {

drivers/staging/iio/magnetometer/Kconfig

@@ -6,6 +6,8 @@ menu "Magnetometer sensors"
 config SENSORS_HMC5843
 	tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer"
 	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say Y here to add support for the Honeywell HMC5843, HMC5883 and
 	  HMC5883L 3-Axis Magnetometer (digital compass).

include/linux/hid-sensor-hub.h

@@ -21,6 +21,8 @@
 
 #include <linux/hid.h>
 #include <linux/hid-sensor-ids.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
 
 /**
  * struct hid_sensor_hub_attribute_info - Attribute info
@@ -184,6 +186,7 @@ struct hid_sensor_common {
 	struct platform_device *pdev;
 	unsigned usage_id;
 	bool data_ready;
+	struct iio_trigger *trigger;
 	struct hid_sensor_hub_attribute_info poll;
 	struct hid_sensor_hub_attribute_info report_state;
 	struct hid_sensor_hub_attribute_info power_state;