[PATCH] IB/mthca: Clean up error messages

- Fix incorrect cut-n-paste in error messages.
- Add missing newlines in error messages.
- Use DRV_NAME instead of "ib_mthca" in a couple of places.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/infiniband/hw/mthca/mthca_eq.c

@@ -615,8 +615,7 @@ static void mthca_free_eq(struct mthca_dev *dev,
 	if (err)
 		mthca_warn(dev, "HW2SW_EQ failed (%d)\n", err);
 	if (status)
-		mthca_warn(dev, "HW2SW_EQ returned status 0x%02x\n",
-			   status);
+		mthca_warn(dev, "HW2SW_EQ returned status 0x%02x\n", status);
 
 	dev->eq_table.arm_mask &= ~eq->eqn_mask;
 
@@ -709,8 +708,7 @@ static int __devinit mthca_map_eq_regs(struct mthca_dev *dev)
 		if (mthca_map_reg(dev, ((pci_resource_len(dev->pdev, 0) - 1) &
 					dev->fw.arbel.eq_arm_base) + 4, 4,
 				  &dev->eq_regs.arbel.eq_arm)) {
-			mthca_err(dev, "Couldn't map interrupt clear register, "
-				  "aborting.\n");
+			mthca_err(dev, "Couldn't map EQ arm register, aborting.\n");
 			mthca_unmap_reg(dev, (pci_resource_len(dev->pdev, 0) - 1) &
 					dev->fw.arbel.clr_int_base, MTHCA_CLR_INT_SIZE,
 					dev->clr_base);
@@ -721,8 +719,7 @@ static int __devinit mthca_map_eq_regs(struct mthca_dev *dev)
 				  dev->fw.arbel.eq_set_ci_base,
 				  MTHCA_EQ_SET_CI_SIZE,
 				  &dev->eq_regs.arbel.eq_set_ci_base)) {
-			mthca_err(dev, "Couldn't map interrupt clear register, "
-				  "aborting.\n");
+			mthca_err(dev, "Couldn't map EQ CI register, aborting.\n");
 			mthca_unmap_reg(dev, ((pci_resource_len(dev->pdev, 0) - 1) &
 					      dev->fw.arbel.eq_arm_base) + 4, 4,
 					dev->eq_regs.arbel.eq_arm);

drivers/infiniband/hw/mthca/mthca_main.c

@@ -70,7 +70,7 @@ MODULE_PARM_DESC(msi, "attempt to use MSI if nonzero");
 #endif /* CONFIG_PCI_MSI */
 
 static const char mthca_version[] __devinitdata =
-	"ib_mthca: Mellanox InfiniBand HCA driver v"
+	DRV_NAME ": Mellanox InfiniBand HCA driver v"
 	DRV_VERSION " (" DRV_RELDATE ")\n";
 
 static struct mthca_profile default_profile = {
@@ -928,13 +928,13 @@ static int __devinit mthca_init_one(struct pci_dev *pdev,
 	 */
 	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM) ||
 	    pci_resource_len(pdev, 0) != 1 << 20) {
-		dev_err(&pdev->dev, "Missing DCS, aborting.");
+		dev_err(&pdev->dev, "Missing DCS, aborting.\n");
 		err = -ENODEV;
 		goto err_disable_pdev;
 	}
 	if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM) ||
 	    pci_resource_len(pdev, 2) != 1 << 23) {
-		dev_err(&pdev->dev, "Missing UAR, aborting.");
+		dev_err(&pdev->dev, "Missing UAR, aborting.\n");
 		err = -ENODEV;
 		goto err_disable_pdev;
 	}
@@ -1164,7 +1164,7 @@ static struct pci_device_id mthca_pci_table[] = {
 MODULE_DEVICE_TABLE(pci, mthca_pci_table);
 
 static struct pci_driver mthca_driver = {
-	.name		= "ib_mthca",
+	.name		= DRV_NAME,
 	.id_table	= mthca_pci_table,
 	.probe		= mthca_init_one,
 	.remove		= __devexit_p(mthca_remove_one)