Merge remote-tracking branches 'regulator/topic/core',...

Merge remote-tracking branches 'regulator/topic/core', 'regulator/topic/regmap' and 'regulator/topic/register' into regulator-next

Documentation/power/regulator/regulator.txt

@@ -11,8 +11,7 @@ Registration
 Drivers can register a regulator by calling :-
 
 struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
-	struct device *dev, struct regulator_init_data *init_data,
-	void *driver_data, struct device_node *of_node);
+					 const struct regulator_config *config);
 
 This will register the regulators capabilities and operations to the regulator
 core.

drivers/mfd/tps65090.c

@@ -78,17 +78,6 @@ static struct mfd_cell tps65090s[] = {
 	},
 };
 
-struct tps65090 {
-	struct mutex		lock;
-	struct device		*dev;
-	struct i2c_client	*client;
-	struct regmap		*rmap;
-	struct irq_chip		irq_chip;
-	struct mutex		irq_lock;
-	int			irq_base;
-	unsigned int		id;
-};
-
 int tps65090_write(struct device *dev, int reg, uint8_t val)
 {
 	struct tps65090 *tps = dev_get_drvdata(dev);

drivers/regulator/88pm8607.c

@@ -27,13 +27,8 @@ struct pm8607_regulator_info {
 	unsigned int	*vol_table;
 	unsigned int	*vol_suspend;
 
-	int	vol_reg;
-	int	vol_shift;
-	int	vol_nbits;
 	int	update_reg;
 	int	update_bit;
-	int	enable_reg;
-	int	enable_bit;
 	int	slope_double;
 };
 
@@ -216,7 +211,7 @@ static int pm8607_list_voltage(struct regulator_dev *rdev, unsigned index)
 	struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
 	int ret = -EINVAL;
 
-	if (info->vol_table && (index < (1 << info->vol_nbits))) {
+	if (info->vol_table && (index < rdev->desc->n_voltages)) {
 		ret = info->vol_table[index];
 		if (info->slope_double)
 			ret <<= 1;
@@ -224,51 +219,16 @@ static int pm8607_list_voltage(struct regulator_dev *rdev, unsigned index)
 	return ret;
 }
 
-static int choose_voltage(struct regulator_dev *rdev, int min_uV, int max_uV)
+static int pm8607_set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
 {
 	struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
-	int i, ret = -ENOENT;
-
-	if (info->slope_double) {
-		min_uV = min_uV >> 1;
-		max_uV = max_uV >> 1;
-	}
-	if (info->vol_table) {
-		for (i = 0; i < (1 << info->vol_nbits); i++) {
-			if (!info->vol_table[i])
-				break;
-			if ((min_uV <= info->vol_table[i])
-				&& (max_uV >= info->vol_table[i])) {
-				ret = i;
-				break;
-			}
-		}
-	}
-	if (ret < 0)
-		pr_err("invalid voltage range (%d %d) uV\n", min_uV, max_uV);
-	return ret;
-}
-
-static int pm8607_set_voltage(struct regulator_dev *rdev,
-			      int min_uV, int max_uV, unsigned *selector)
-{
-	struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
-	uint8_t val, mask;
+	uint8_t val;
 	int ret;
 
-	if (min_uV > max_uV) {
-		pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV);
-		return -EINVAL;
-	}
-
-	ret = choose_voltage(rdev, min_uV, max_uV);
-	if (ret < 0)
-		return -EINVAL;
-	*selector = ret;
-	val = (uint8_t)(ret << info->vol_shift);
-	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
+	val = (uint8_t)(selector << (ffs(rdev->desc->vsel_mask) - 1));
 
-	ret = pm860x_set_bits(info->i2c, info->vol_reg, mask, val);
+	ret = pm860x_set_bits(info->i2c, rdev->desc->vsel_reg,
+			      rdev->desc->vsel_mask, val);
 	if (ret)
 		return ret;
 	switch (info->desc.id) {
@@ -282,60 +242,16 @@ static int pm8607_set_voltage(struct regulator_dev *rdev,
 	return ret;
 }
 
-static int pm8607_get_voltage(struct regulator_dev *rdev)
-{
-	struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
-	uint8_t val, mask;
-	int ret;
-
-	ret = pm860x_reg_read(info->i2c, info->vol_reg);
-	if (ret < 0)
-		return ret;
-
-	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
-	val = ((unsigned char)ret & mask) >> info->vol_shift;
-
-	return pm8607_list_voltage(rdev, val);
-}
-
-static int pm8607_enable(struct regulator_dev *rdev)
-{
-	struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
-
-	return pm860x_set_bits(info->i2c, info->enable_reg,
-			       1 << info->enable_bit,
-			       1 << info->enable_bit);
-}
-
-static int pm8607_disable(struct regulator_dev *rdev)
-{
-	struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
-
-	return pm860x_set_bits(info->i2c, info->enable_reg,
-			       1 << info->enable_bit, 0);
-}
-
-static int pm8607_is_enabled(struct regulator_dev *rdev)
-{
-	struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
-	int ret;
-
-	ret = pm860x_reg_read(info->i2c, info->enable_reg);
-	if (ret < 0)
-		return ret;
-
-	return !!((unsigned char)ret & (1 << info->enable_bit));
-}
-
 static struct regulator_ops pm8607_regulator_ops = {
-	.set_voltage	= pm8607_set_voltage,
-	.get_voltage	= pm8607_get_voltage,
-	.enable		= pm8607_enable,
-	.disable	= pm8607_disable,
-	.is_enabled	= pm8607_is_enabled,
+	.list_voltage	= pm8607_list_voltage,
+	.set_voltage_sel = pm8607_set_voltage_sel,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
 };
 
-#define PM8607_DVC(vreg, nbits, ureg, ubit, ereg, ebit)			\
+#define PM8607_DVC(vreg, ureg, ubit, ereg, ebit)			\
 {									\
 	.desc	= {							\
 		.name	= #vreg,					\
@@ -343,20 +259,20 @@ static struct regulator_ops pm8607_regulator_ops = {
 		.type	= REGULATOR_VOLTAGE,				\
 		.id	= PM8607_ID_##vreg,				\
 		.owner	= THIS_MODULE,					\
+		.n_voltages = ARRAY_SIZE(vreg##_table),			\
+		.vsel_reg = PM8607_##vreg,				\
+		.vsel_mask = ARRAY_SIZE(vreg##_table) - 1,		\
+		.enable_reg = PM8607_##ereg,				\
+		.enable_mask = 1 << (ebit),				\
 	},								\
-	.vol_reg	= PM8607_##vreg,				\
-	.vol_shift	= (0),						\
-	.vol_nbits	= (nbits),					\
 	.update_reg	= PM8607_##ureg,				\
 	.update_bit	= (ubit),					\
-	.enable_reg	= PM8607_##ereg,				\
-	.enable_bit	= (ebit),					\
 	.slope_double	= (0),						\
 	.vol_table	= (unsigned int *)&vreg##_table,		\
 	.vol_suspend	= (unsigned int *)&vreg##_suspend_table,	\
 }
 
-#define PM8607_LDO(_id, vreg, shift, nbits, ereg, ebit)			\
+#define PM8607_LDO(_id, vreg, shift, ereg, ebit)			\
 {									\
 	.desc	= {							\
 		.name	= "LDO" #_id,					\
@@ -364,35 +280,35 @@ static struct regulator_ops pm8607_regulator_ops = {
 		.type	= REGULATOR_VOLTAGE,				\
 		.id	= PM8607_ID_LDO##_id,				\
 		.owner	= THIS_MODULE,					\
-	},								\
-	.vol_reg	= PM8607_##vreg,				\
-	.vol_shift	= (shift),					\
-	.vol_nbits	= (nbits),					\
+		.n_voltages = ARRAY_SIZE(LDO##_id##_table),		\
+		.vsel_reg = PM8607_##vreg,				\
+		.vsel_mask = (ARRAY_SIZE(LDO##_id##_table) - 1) << (shift), \
 		.enable_reg = PM8607_##ereg,				\
-	.enable_bit	= (ebit),					\
+		.enable_mask = 1 << (ebit),				\
+	},								\
 	.slope_double	= (0),						\
 	.vol_table	= (unsigned int *)&LDO##_id##_table,		\
 	.vol_suspend	= (unsigned int *)&LDO##_id##_suspend_table,	\
 }
 
 static struct pm8607_regulator_info pm8607_regulator_info[] = {
-	PM8607_DVC(BUCK1, 6, GO, 0, SUPPLIES_EN11, 0),
-	PM8607_DVC(BUCK2, 6, GO, 1, SUPPLIES_EN11, 1),
-	PM8607_DVC(BUCK3, 6, GO, 2, SUPPLIES_EN11, 2),
-
-	PM8607_LDO( 1,         LDO1, 0, 2, SUPPLIES_EN11, 3),
-	PM8607_LDO( 2,         LDO2, 0, 3, SUPPLIES_EN11, 4),
-	PM8607_LDO( 3,         LDO3, 0, 3, SUPPLIES_EN11, 5),
-	PM8607_LDO( 4,         LDO4, 0, 3, SUPPLIES_EN11, 6),
-	PM8607_LDO( 5,         LDO5, 0, 2, SUPPLIES_EN11, 7),
-	PM8607_LDO( 6,         LDO6, 0, 3, SUPPLIES_EN12, 0),
-	PM8607_LDO( 7,         LDO7, 0, 3, SUPPLIES_EN12, 1),
-	PM8607_LDO( 8,         LDO8, 0, 3, SUPPLIES_EN12, 2),
-	PM8607_LDO( 9,         LDO9, 0, 3, SUPPLIES_EN12, 3),
-	PM8607_LDO(10,        LDO10, 0, 4, SUPPLIES_EN12, 4),
-	PM8607_LDO(12,        LDO12, 0, 4, SUPPLIES_EN12, 5),
-	PM8607_LDO(13, VIBRATOR_SET, 1, 3,  VIBRATOR_SET, 0),
-	PM8607_LDO(14,        LDO14, 0, 3, SUPPLIES_EN12, 6),
+	PM8607_DVC(BUCK1, GO, 0, SUPPLIES_EN11, 0),
+	PM8607_DVC(BUCK2, GO, 1, SUPPLIES_EN11, 1),
+	PM8607_DVC(BUCK3, GO, 2, SUPPLIES_EN11, 2),
+
+	PM8607_LDO(1,         LDO1, 0, SUPPLIES_EN11, 3),
+	PM8607_LDO(2,         LDO2, 0, SUPPLIES_EN11, 4),
+	PM8607_LDO(3,         LDO3, 0, SUPPLIES_EN11, 5),
+	PM8607_LDO(4,         LDO4, 0, SUPPLIES_EN11, 6),
+	PM8607_LDO(5,         LDO5, 0, SUPPLIES_EN11, 7),
+	PM8607_LDO(6,         LDO6, 0, SUPPLIES_EN12, 0),
+	PM8607_LDO(7,         LDO7, 0, SUPPLIES_EN12, 1),
+	PM8607_LDO(8,         LDO8, 0, SUPPLIES_EN12, 2),
+	PM8607_LDO(9,         LDO9, 0, SUPPLIES_EN12, 3),
+	PM8607_LDO(10,        LDO10, 0, SUPPLIES_EN12, 4),
+	PM8607_LDO(12,        LDO12, 0, SUPPLIES_EN12, 5),
+	PM8607_LDO(13, VIBRATOR_SET, 1, VIBRATOR_SET, 0),
+	PM8607_LDO(14,        LDO14, 0, SUPPLIES_EN12, 6),
 };
 
 static int __devinit pm8607_regulator_probe(struct platform_device *pdev)
@@ -400,6 +316,7 @@ static int __devinit pm8607_regulator_probe(struct platform_device *pdev)
 	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
 	struct pm8607_regulator_info *info = NULL;
 	struct regulator_init_data *pdata = pdev->dev.platform_data;
+	struct regulator_config config = { };
 	struct resource *res;
 	int i;
 
@@ -425,9 +342,17 @@ static int __devinit pm8607_regulator_probe(struct platform_device *pdev)
 	if ((i == PM8607_ID_BUCK3) && info->chip->buck3_double)
 		info->slope_double = 1;
 
+	config.dev = &pdev->dev;
+	config.init_data = pdata;
+	config.driver_data = info;
+
+	if (chip->id == CHIP_PM8607)
+		config.regmap = chip->regmap;
+	else
+		config.regmap = chip->regmap_companion;
+
 	/* replace driver_data with info */
-	info->regulator = regulator_register(&info->desc, &pdev->dev,
-					     pdata, info, NULL);
+	info->regulator = regulator_register(&info->desc, &config);
 	if (IS_ERR(info->regulator)) {
 		dev_err(&pdev->dev, "failed to register regulator %s\n",
 			info->desc.name);

drivers/regulator/Kconfig

@@ -223,6 +223,16 @@ config REGULATOR_PCF50633
 	 Say Y here to support the voltage regulators and convertors
 	 on PCF50633
 
+config REGULATOR_RC5T583
+	tristate "RICOH RC5T583 Power regulators"
+	depends on MFD_RC5T583
+	help
+	  Select this option to enable the power regulator of RICOH
+	  PMIC RC5T583.
+	  This driver supports the control of different power rails of device
+	  through regulator interface. The device supports multiple DCDC/LDO
+	  outputs which can be controlled by i2c communication.
+
 config REGULATOR_S5M8767
 	tristate "Samsung S5M8767A voltage regulator"
 	depends on MFD_S5M_CORE
@@ -268,11 +278,11 @@ config REGULATOR_TPS6105X
 	  audio amplifiers.
 
 config REGULATOR_TPS62360
-	tristate "TI TPS62360 Power Regulator"
+	tristate "TI TPS6236x Power Regulator"
 	depends on I2C
 	select REGMAP_I2C
 	help
-	  This driver supports TPS62360 voltage regulator chip. This
+	  This driver supports TPS6236x voltage regulator chip. This
 	  regulator is meant for processor core supply. This chip is
 	  high-frequency synchronous step down dc-dc converter optimized
 	  for battery-powered portable applications.
@@ -294,6 +304,13 @@ config REGULATOR_TPS6507X
 	  three step-down converters and two general-purpose LDO voltage regulators.
 	  It supports TI's software based Class-2 SmartReflex implementation.
 
+config REGULATOR_TPS65090
+	tristate "TI TPS65090 Power regulator"
+	depends on MFD_TPS65090
+	help
+	  This driver provides support for the voltage regulators on the
+	  TI TPS65090 PMIC.
+
 config REGULATOR_TPS65217
 	tristate "TI TPS65217 Power regulators"
 	depends on MFD_TPS65217

drivers/regulator/Makefile

@@ -9,7 +9,6 @@ obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
 obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
 obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
 
-obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
 obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
 obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
 obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
@@ -20,6 +19,7 @@ obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
 obj-$(CONFIG_REGULATOR_DA9052)	+= da9052-regulator.o
 obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o
 obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
+obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
 obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
 obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
 obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o
@@ -35,11 +35,13 @@ obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
 obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
+obj-$(CONFIG_REGULATOR_RC5T583)  += rc5t583-regulator.o
 obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
 obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
 obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o
+obj-$(CONFIG_REGULATOR_TPS65090) += tps65090-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65217) += tps65217-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o

drivers/regulator/aat2870-regulator.c

@@ -178,6 +178,7 @@ static struct aat2870_regulator *aat2870_get_regulator(int id)
 static int aat2870_regulator_probe(struct platform_device *pdev)
 {
 	struct aat2870_regulator *ri;
+	struct regulator_config config = { 0 };
 	struct regulator_dev *rdev;
 
 	ri = aat2870_get_regulator(pdev->id);
@@ -187,8 +188,11 @@ static int aat2870_regulator_probe(struct platform_device *pdev)
 	}
 	ri->aat2870 = dev_get_drvdata(pdev->dev.parent);
 
-	rdev = regulator_register(&ri->desc, &pdev->dev,
-				  pdev->dev.platform_data, ri, NULL);
+	config.dev = &pdev->dev;
+	config.driver_data = ri;
+	config.init_data = pdev->dev.platform_data;
+
+	rdev = regulator_register(&ri->desc, &config);
 	if (IS_ERR(rdev)) {
 		dev_err(&pdev->dev, "Failed to register regulator %s\n",
 			ri->desc.name);
@@ -231,3 +235,4 @@ module_exit(aat2870_regulator_exit);
 MODULE_DESCRIPTION("AnalogicTech AAT2870 Regulator");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Jin Park <jinyoungp@nvidia.com>");
+MODULE_ALIAS("platform:aat2870-regulator");

drivers/regulator/ab3100.c

@@ -338,20 +338,12 @@ static int ab3100_get_best_voltage_index(struct regulator_dev *reg,
 	return bestindex;
 }
 
-static int ab3100_set_voltage_regulator(struct regulator_dev *reg,
-					int min_uV, int max_uV,
-					unsigned *selector)
+static int ab3100_set_voltage_regulator_sel(struct regulator_dev *reg,
+					    unsigned selector)
 {
 	struct ab3100_regulator *abreg = reg->reg_data;
 	u8 regval;
 	int err;
-	int bestindex;
-
-	bestindex = ab3100_get_best_voltage_index(reg, min_uV, max_uV);
-	if (bestindex < 0)
-		return bestindex;
-
-	*selector = bestindex;
 
 	err = abx500_get_register_interruptible(abreg->dev, 0,
 						abreg->regreg, &regval);
@@ -364,7 +356,7 @@ static int ab3100_set_voltage_regulator(struct regulator_dev *reg,
 
 	/* The highest three bits control the variable regulators */
 	regval &= ~0xE0;
-	regval |= (bestindex << 5);
+	regval |= (selector << 5);
 
 	err = abx500_set_register_interruptible(abreg->dev, 0,
 						abreg->regreg, regval);
@@ -464,7 +456,7 @@ static struct regulator_ops regulator_ops_variable = {
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
 	.get_voltage = ab3100_get_voltage_regulator,
-	.set_voltage = ab3100_set_voltage_regulator,
+	.set_voltage_sel = ab3100_set_voltage_regulator_sel,
 	.list_voltage = ab3100_list_voltage_regulator,
 	.enable_time = ab3100_enable_time_regulator,
 };
@@ -474,7 +466,7 @@ static struct regulator_ops regulator_ops_variable_sleepable = {
 	.disable     = ab3100_disable_regulator,
 	.is_enabled  = ab3100_is_enabled_regulator,
 	.get_voltage = ab3100_get_voltage_regulator,
-	.set_voltage = ab3100_set_voltage_regulator,
+	.set_voltage_sel = ab3100_set_voltage_regulator_sel,
 	.set_suspend_voltage = ab3100_set_suspend_voltage_regulator,
 	.list_voltage = ab3100_list_voltage_regulator,
 	.enable_time = ab3100_enable_time_regulator,
@@ -582,6 +574,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
 static int __devinit ab3100_regulators_probe(struct platform_device *pdev)
 {
 	struct ab3100_platform_data *plfdata = pdev->dev.platform_data;
+	struct regulator_config config = { };
 	int err = 0;
 	u8 data;
 	int i;
@@ -627,15 +620,15 @@ static int __devinit ab3100_regulators_probe(struct platform_device *pdev)
 		reg->dev = &pdev->dev;
 		reg->plfdata = plfdata;
 
+		config.dev = &pdev->dev;
+		config.driver_data = reg;
+		config.init_data = &plfdata->reg_constraints[i];
+
 		/*
 		 * Register the regulator, pass around
 		 * the ab3100_regulator struct
 		 */
-		rdev = regulator_register(&ab3100_regulator_desc[i],
-					  &pdev->dev,
-					  &plfdata->reg_constraints[i],
-					  reg, NULL);
-
+		rdev = regulator_register(&ab3100_regulator_desc[i], &config);
 		if (IS_ERR(rdev)) {
 			err = PTR_ERR(rdev);
 			dev_err(&pdev->dev,

drivers/regulator/ab8500.c

@@ -234,25 +234,8 @@ static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev)
 		return val;
 }
 
-static int ab8500_get_best_voltage_index(struct regulator_dev *rdev,
-		int min_uV, int max_uV)
-{
-	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
-	int i;
-
-	/* check the supported voltage */
-	for (i = 0; i < info->voltages_len; i++) {
-		if ((info->voltages[i] >= min_uV) &&
-		    (info->voltages[i] <= max_uV))
-			return i;
-	}
-
-	return -EINVAL;
-}
-
-static int ab8500_regulator_set_voltage(struct regulator_dev *rdev,
-					int min_uV, int max_uV,
-					unsigned *selector)
+static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev,
+					    unsigned selector)
 {
 	int ret;
 	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
@@ -263,18 +246,8 @@ static int ab8500_regulator_set_voltage(struct regulator_dev *rdev,
 		return -EINVAL;
 	}
 
-	/* get the appropriate voltages within the range */
-	ret = ab8500_get_best_voltage_index(rdev, min_uV, max_uV);
-	if (ret < 0) {
-		dev_err(rdev_get_dev(rdev),
-				"couldn't get best voltage for regulator\n");
-		return ret;
-	}
-
-	*selector = ret;
-
 	/* set the registers for the request */
-	regval = (u8)ret;
+	regval = (u8)selector;
 	ret = abx500_mask_and_set_register_interruptible(info->dev,
 			info->voltage_bank, info->voltage_reg,
 			info->voltage_mask, regval);
@@ -319,7 +292,7 @@ static struct regulator_ops ab8500_regulator_ops = {
 	.disable	= ab8500_regulator_disable,
 	.is_enabled	= ab8500_regulator_is_enabled,
 	.get_voltage_sel = ab8500_regulator_get_voltage_sel,
-	.set_voltage	= ab8500_regulator_set_voltage,
+	.set_voltage_sel = ab8500_regulator_set_voltage_sel,
 	.list_voltage	= ab8500_list_voltage,
 	.enable_time	= ab8500_regulator_enable_time,
 	.set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
@@ -739,6 +712,7 @@ static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
 {
 	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
 	struct ab8500_platform_data *pdata;
+	struct regulator_config config = { };
 	int i, err;
 
 	if (!ab8500) {
@@ -806,6 +780,10 @@ static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
 		info = &ab8500_regulator_info[i];
 		info->dev = &pdev->dev;
 
+		config.dev = &pdev->dev;
+		config.init_data = &pdata->regulator[i];
+		config.driver_data = info;
+
 		/* fix for hardware before ab8500v2.0 */
 		if (abx500_get_chip_id(info->dev) < 0x20) {
 			if (info->desc.id == AB8500_LDO_AUX3) {
@@ -819,8 +797,7 @@ static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
 		}
 
 		/* register regulator with framework */
-		info->regulator = regulator_register(&info->desc, &pdev->dev,
-				&pdata->regulator[i], info, NULL);
+		info->regulator = regulator_register(&info->desc, &config);
 		if (IS_ERR(info->regulator)) {
 			err = PTR_ERR(info->regulator);
 			dev_err(&pdev->dev, "failed to register regulator %s\n",

drivers/regulator/ad5398.c

@@ -99,8 +99,8 @@ static int ad5398_set_current_limit(struct regulator_dev *rdev, int min_uA, int
 	if (ad5398_calc_current(chip, selector) > max_uA)
 		return -EINVAL;
 
-	dev_dbg(&client->dev, "changing current %dmA\n",
-		ad5398_calc_current(chip, selector) / 1000);
+	dev_dbg(&client->dev, "changing current %duA\n",
+		ad5398_calc_current(chip, selector));
 
 	/* read chip enable bit */
 	ret = ad5398_read_reg(client, &data);
@@ -184,7 +184,7 @@ static struct regulator_ops ad5398_ops = {
 	.is_enabled = ad5398_is_enabled,
 };
 
-static struct regulator_desc ad5398_reg = {
+static const struct regulator_desc ad5398_reg = {
 	.name = "isink",
 	.id = 0,
 	.ops = &ad5398_ops,
@@ -212,6 +212,7 @@ static int __devinit ad5398_probe(struct i2c_client *client,
 				const struct i2c_device_id *id)
 {
 	struct regulator_init_data *init_data = client->dev.platform_data;
+	struct regulator_config config = { };
 	struct ad5398_chip_info *chip;
 	const struct ad5398_current_data_format *df =
 			(struct ad5398_current_data_format *)id->driver_data;
@@ -220,10 +221,14 @@ static int __devinit ad5398_probe(struct i2c_client *client,
 	if (!init_data)
 		return -EINVAL;
 
-	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
 	if (!chip)
 		return -ENOMEM;
 
+	config.dev = &client->dev;
+	config.init_data = init_data;
+	config.driver_data = chip;
+
 	chip->client = client;
 
 	chip->min_uA = df->min_uA;
@@ -232,8 +237,7 @@ static int __devinit ad5398_probe(struct i2c_client *client,
 	chip->current_offset = df->current_offset;
 	chip->current_mask = (chip->current_level - 1) << chip->current_offset;
 
-	chip->rdev = regulator_register(&ad5398_reg, &client->dev,
-					init_data, chip, NULL);
+	chip->rdev = regulator_register(&ad5398_reg, &config);
 	if (IS_ERR(chip->rdev)) {
 		ret = PTR_ERR(chip->rdev);
 		dev_err(&client->dev, "failed to register %s %s\n",
@@ -246,7 +250,6 @@ static int __devinit ad5398_probe(struct i2c_client *client,
 	return 0;
 
 err:
-	kfree(chip);
 	return ret;
 }
 
@@ -255,8 +258,6 @@ static int __devexit ad5398_remove(struct i2c_client *client)
 	struct ad5398_chip_info *chip = i2c_get_clientdata(client);
 
 	regulator_unregister(chip->rdev);
-	kfree(chip);
-
 	return 0;
 }
 

drivers/regulator/anatop-regulator.c

@@ -122,6 +122,7 @@ static int __devinit anatop_regulator_probe(struct platform_device *pdev)
 	struct anatop_regulator *sreg;
 	struct regulator_init_data *initdata;
 	struct anatop *anatopmfd = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_config config = { };
 	int ret = 0;
 
 	initdata = of_get_regulator_init_data(dev, np);
@@ -178,9 +179,13 @@ static int __devinit anatop_regulator_probe(struct platform_device *pdev)
 	rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage)
 		/ 25000 + 1;
 
+	config.dev = &pdev->dev;
+	config.init_data = initdata;
+	config.driver_data = sreg;
+	config.of_node = pdev->dev.of_node;
+
 	/* register regulator */
-	rdev = regulator_register(rdesc, dev,
-				  initdata, sreg, pdev->dev.of_node);
+	rdev = regulator_register(rdesc, &config);
 	if (IS_ERR(rdev)) {
 		dev_err(dev, "failed to register %s\n",
 			rdesc->name);

drivers/regulator/da903x.c

@@ -517,6 +517,7 @@ static int __devinit da903x_regulator_probe(struct platform_device *pdev)
 {
 	struct da903x_regulator_info *ri = NULL;
 	struct regulator_dev *rdev;
+	struct regulator_config config = { };
 
 	ri = find_regulator_info(pdev->id);
 	if (ri == NULL) {
@@ -536,8 +537,11 @@ static int __devinit da903x_regulator_probe(struct platform_device *pdev)
 	if (ri->desc.id == DA9030_ID_LDO1 || ri->desc.id == DA9030_ID_LDO15)
 		ri->desc.ops = &da9030_regulator_ldo1_15_ops;
 
-	rdev = regulator_register(&ri->desc, &pdev->dev,
-				  pdev->dev.platform_data, ri, NULL);
+	config.dev = &pdev->dev;
+	config.init_data = pdev->dev.platform_data;
+	config.driver_data = ri;
+
+	rdev = regulator_register(&ri->desc, &config);
 	if (IS_ERR(rdev)) {
 		dev_err(&pdev->dev, "failed to register regulator %s\n",
 				ri->desc.name);

drivers/regulator/db8500-prcmu.c

@@ -414,6 +414,7 @@ static int __devinit db8500_regulator_probe(struct platform_device *pdev)
 {
 	struct regulator_init_data *db8500_init_data =
 					dev_get_platdata(&pdev->dev);
+	struct regulator_config config = { };
 	int i, err;
 
 	/* register all regulators */
@@ -425,9 +426,12 @@ static int __devinit db8500_regulator_probe(struct platform_device *pdev)
 		info = &dbx500_regulator_info[i];
 		info->dev = &pdev->dev;
 
+		config.dev = &pdev->dev;
+		config.init_data = init_data;
+		config.driver_data = info;
+
 		/* register with the regulator framework */
-		info->rdev = regulator_register(&info->desc, &pdev->dev,
-				init_data, info, NULL);
+		info->rdev = regulator_register(&info->desc, &config);
 		if (IS_ERR(info->rdev)) {
 			err = PTR_ERR(info->rdev);
 			dev_err(&pdev->dev, "failed to register %s: err %i\n",

drivers/regulator/dummy.c

@@ -39,10 +39,13 @@ static struct regulator_desc dummy_desc = {
 
 static int __devinit dummy_regulator_probe(struct platform_device *pdev)
 {
+	struct regulator_config config = { };
 	int ret;
 
-	dummy_regulator_rdev = regulator_register(&dummy_desc, NULL,
-						  &dummy_initdata, NULL, NULL);
+	config.dev = &pdev->dev;
+	config.init_data = &dummy_initdata;
+
+	dummy_regulator_rdev = regulator_register(&dummy_desc, &config);
 	if (IS_ERR(dummy_regulator_rdev)) {
 		ret = PTR_ERR(dummy_regulator_rdev);
 		pr_err("Failed to register regulator: %d\n", ret);

drivers/regulator/fixed.c

@@ -105,10 +105,8 @@ static int fixed_voltage_enable(struct regulator_dev *dev)
 {
 	struct fixed_voltage_data *data = rdev_get_drvdata(dev);
 
-	if (gpio_is_valid(data->gpio)) {
 	gpio_set_value_cansleep(data->gpio, data->enable_high);
 	data->is_enabled = true;
-	}
 
 	return 0;
 }
@@ -117,10 +115,8 @@ static int fixed_voltage_disable(struct regulator_dev *dev)
 {
 	struct fixed_voltage_data *data = rdev_get_drvdata(dev);
 
-	if (gpio_is_valid(data->gpio)) {
 	gpio_set_value_cansleep(data->gpio, !data->enable_high);
 	data->is_enabled = false;
-	}
 
 	return 0;
 }
@@ -153,7 +149,7 @@ static int fixed_voltage_list_voltage(struct regulator_dev *dev,
 	return data->microvolts;
 }
 
-static struct regulator_ops fixed_voltage_ops = {
+static struct regulator_ops fixed_voltage_gpio_ops = {
 	.is_enabled = fixed_voltage_is_enabled,
 	.enable = fixed_voltage_enable,
 	.disable = fixed_voltage_disable,
@@ -162,10 +158,16 @@ static struct regulator_ops fixed_voltage_ops = {
 	.list_voltage = fixed_voltage_list_voltage,
 };
 
+static struct regulator_ops fixed_voltage_ops = {
+	.get_voltage = fixed_voltage_get_voltage,
+	.list_voltage = fixed_voltage_list_voltage,
+};
+
 static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
 {
 	struct fixed_voltage_config *config;
 	struct fixed_voltage_data *drvdata;
+	struct regulator_config cfg = { };
 	int ret;
 
 	if (pdev->dev.of_node)
@@ -176,7 +178,8 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
 	if (!config)
 		return -ENOMEM;
 
-	drvdata = kzalloc(sizeof(struct fixed_voltage_data), GFP_KERNEL);
+	drvdata = devm_kzalloc(&pdev->dev, sizeof(struct fixed_voltage_data),
+			       GFP_KERNEL);
 	if (drvdata == NULL) {
 		dev_err(&pdev->dev, "Failed to allocate device data\n");
 		ret = -ENOMEM;
@@ -191,7 +194,6 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
 	}
 	drvdata->desc.type = REGULATOR_VOLTAGE;
 	drvdata->desc.owner = THIS_MODULE;
-	drvdata->desc.ops = &fixed_voltage_ops;
 
 	if (config->microvolts)
 		drvdata->desc.n_voltages = 1;
@@ -201,6 +203,7 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
 	drvdata->startup_delay = config->startup_delay;
 
 	if (gpio_is_valid(config->gpio)) {
+		int gpio_flag;
 		drvdata->enable_high = config->enable_high;
 
 		/* FIXME: Remove below print warning
@@ -218,39 +221,39 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
 			dev_warn(&pdev->dev,
 				"using GPIO 0 for regulator enable control\n");
 
-		ret = gpio_request(config->gpio, config->supply_name);
-		if (ret) {
-			dev_err(&pdev->dev,
-			   "Could not obtain regulator enable GPIO %d: %d\n",
-							config->gpio, ret);
-			goto err_name;
-		}
-
-		/* set output direction without changing state
+		/*
+		 * set output direction without changing state
 		 * to prevent glitch
 		 */
 		drvdata->is_enabled = config->enabled_at_boot;
 		ret = drvdata->is_enabled ?
 				config->enable_high : !config->enable_high;
+		gpio_flag = ret ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
+
+		if (config->gpio_is_open_drain)
+			gpio_flag |= GPIOF_OPEN_DRAIN;
 
-		ret = gpio_direction_output(config->gpio, ret);
+		ret = gpio_request_one(config->gpio, gpio_flag,
+						config->supply_name);
 		if (ret) {
 			dev_err(&pdev->dev,
-			   "Could not configure regulator enable GPIO %d direction: %d\n",
+			   "Could not obtain regulator enable GPIO %d: %d\n",
 							config->gpio, ret);
-			goto err_gpio;
+			goto err_name;
 		}
 
+		drvdata->desc.ops = &fixed_voltage_gpio_ops;
+
 	} else {
-		/* Regulator without GPIO control is considered
-		 * always enabled
-		 */
-		drvdata->is_enabled = true;
+		drvdata->desc.ops = &fixed_voltage_ops;
 	}
 
-	drvdata->dev = regulator_register(&drvdata->desc, &pdev->dev,
-					  config->init_data, drvdata,
-					  pdev->dev.of_node);
+	cfg.dev = &pdev->dev;
+	cfg.init_data = config->init_data;
+	cfg.driver_data = drvdata;
+	cfg.of_node = pdev->dev.of_node;
+
+	drvdata->dev = regulator_register(&drvdata->desc, &cfg);
 	if (IS_ERR(drvdata->dev)) {
 		ret = PTR_ERR(drvdata->dev);
 		dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
@@ -270,7 +273,6 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
 err_name:
 	kfree(drvdata->desc.name);
 err:
-	kfree(drvdata);
 	return ret;
 }
 
@@ -282,7 +284,6 @@ static int __devexit reg_fixed_voltage_remove(struct platform_device *pdev)
 	if (gpio_is_valid(drvdata->gpio))
 		gpio_free(drvdata->gpio);
 	kfree(drvdata->desc.name);
-	kfree(drvdata);
 
 	return 0;
 }

drivers/regulator/gpio-regulator.c

@@ -105,15 +105,15 @@ static int gpio_regulator_set_value(struct regulator_dev *dev,
 					int min, int max)
 {
 	struct gpio_regulator_data *data = rdev_get_drvdata(dev);
-	int ptr, target, state;
+	int ptr, target, state, best_val = INT_MAX;
 
-	target = -1;
 	for (ptr = 0; ptr < data->nr_states; ptr++)
-		if (data->states[ptr].value >= min &&
+		if (data->states[ptr].value < best_val &&
+		    data->states[ptr].value >= min &&
 		    data->states[ptr].value <= max)
 			target = data->states[ptr].gpios;
 
-	if (target < 0)
+	if (best_val == INT_MAX)
 		return -EINVAL;
 
 	for (ptr = 0; ptr < data->nr_gpios; ptr++) {
@@ -172,9 +172,11 @@ static int __devinit gpio_regulator_probe(struct platform_device *pdev)
 {
 	struct gpio_regulator_config *config = pdev->dev.platform_data;
 	struct gpio_regulator_data *drvdata;
+	struct regulator_config cfg = { };
 	int ptr, ret, state;
 
-	drvdata = kzalloc(sizeof(struct gpio_regulator_data), GFP_KERNEL);
+	drvdata = devm_kzalloc(&pdev->dev, sizeof(struct gpio_regulator_data),
+			       GFP_KERNEL);
 	if (drvdata == NULL) {
 		dev_err(&pdev->dev, "Failed to allocate device data\n");
 		return -ENOMEM;
@@ -283,8 +285,11 @@ static int __devinit gpio_regulator_probe(struct platform_device *pdev)
 	}
 	drvdata->state = state;
 
-	drvdata->dev = regulator_register(&drvdata->desc, &pdev->dev,
-					  config->init_data, drvdata, NULL);
+	cfg.dev = &pdev->dev;
+	cfg.init_data = config->init_data;
+	cfg.driver_data = &drvdata;
+
+	drvdata->dev = regulator_register(&drvdata->desc, &cfg);
 	if (IS_ERR(drvdata->dev)) {
 		ret = PTR_ERR(drvdata->dev);
 		dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
@@ -307,7 +312,6 @@ static int __devinit gpio_regulator_probe(struct platform_device *pdev)
 err_name:
 	kfree(drvdata->desc.name);
 err:
-	kfree(drvdata);
 	return ret;
 }
 
@@ -326,7 +330,6 @@ static int __devexit gpio_regulator_remove(struct platform_device *pdev)
 		gpio_free(drvdata->enable_gpio);
 
 	kfree(drvdata->desc.name);
-	kfree(drvdata);
 
 	return 0;
 }

drivers/regulator/isl6271a-regulator.c

@@ -112,7 +112,7 @@ static struct regulator_ops isl_fixed_ops = {
 	.list_voltage	= isl6271a_list_fixed_voltage,
 };
 
-static struct regulator_desc isl_rd[] = {
+static const struct regulator_desc isl_rd[] = {
 	{
 		.name		= "Core Buck",
 		.id		= 0,
@@ -140,6 +140,7 @@ static struct regulator_desc isl_rd[] = {
 static int __devinit isl6271a_probe(struct i2c_client *i2c,
 				     const struct i2c_device_id *id)
 {
+	struct regulator_config config = { };
 	struct regulator_init_data *init_data	= i2c->dev.platform_data;
 	struct isl_pmic *pmic;
 	int err, i;
@@ -147,12 +148,7 @@ static int __devinit isl6271a_probe(struct i2c_client *i2c,
 	if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -EIO;
 
-	if (!init_data) {
-		dev_err(&i2c->dev, "no platform data supplied\n");
-		return -EIO;
-	}
-
-	pmic = kzalloc(sizeof(struct isl_pmic), GFP_KERNEL);
+	pmic = devm_kzalloc(&i2c->dev, sizeof(struct isl_pmic), GFP_KERNEL);
 	if (!pmic)
 		return -ENOMEM;
 
@@ -161,8 +157,14 @@ static int __devinit isl6271a_probe(struct i2c_client *i2c,
 	mutex_init(&pmic->mtx);
 
 	for (i = 0; i < 3; i++) {
-		pmic->rdev[i] = regulator_register(&isl_rd[i], &i2c->dev,
-						init_data, pmic, NULL);
+		config.dev = &i2c->dev;
+		if (i == 0)
+			config.init_data = init_data;
+		else
+			config.init_data = 0;
+		config.driver_data = pmic;
+
+		pmic->rdev[i] = regulator_register(&isl_rd[i], &config);
 		if (IS_ERR(pmic->rdev[i])) {
 			dev_err(&i2c->dev, "failed to register %s\n", id->name);
 			err = PTR_ERR(pmic->rdev[i]);
@@ -177,8 +179,6 @@ static int __devinit isl6271a_probe(struct i2c_client *i2c,
 error:
 	while (--i >= 0)
 		regulator_unregister(pmic->rdev[i]);
-
-	kfree(pmic);
 	return err;
 }
 
@@ -189,9 +189,6 @@ static int __devexit isl6271a_remove(struct i2c_client *i2c)
 
 	for (i = 0; i < 3; i++)
 		regulator_unregister(pmic->rdev[i]);
-
-	kfree(pmic);
-
 	return 0;
 }
 

drivers/regulator/lp3971.c

@@ -124,6 +124,10 @@ static const int *ldo_voltage_map[] = {
 static int lp3971_ldo_list_voltage(struct regulator_dev *dev, unsigned index)
 {
 	int ldo = rdev_get_id(dev) - LP3971_LDO1;
+
+	if (index > LDO_VOL_MAX_IDX)
+		return -EINVAL;
+
 	return 1000 * LDO_VOL_VALUE_MAP(ldo)[index];
 }
 
@@ -168,32 +172,15 @@ static int lp3971_ldo_get_voltage(struct regulator_dev *dev)
 	return 1000 * LDO_VOL_VALUE_MAP(ldo)[val];
 }
 
-static int lp3971_ldo_set_voltage(struct regulator_dev *dev,
-				  int min_uV, int max_uV,
-				  unsigned int *selector)
+static int lp3971_ldo_set_voltage_sel(struct regulator_dev *dev,
+				      unsigned int selector)
 {
 	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
 	int ldo = rdev_get_id(dev) - LP3971_LDO1;
-	int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
-	const int *vol_map = LDO_VOL_VALUE_MAP(ldo);
-	u16 val;
-
-	if (min_vol < vol_map[LDO_VOL_MIN_IDX] ||
-	    min_vol > vol_map[LDO_VOL_MAX_IDX])
-		return -EINVAL;
-
-	for (val = LDO_VOL_MIN_IDX; val <= LDO_VOL_MAX_IDX; val++)
-		if (vol_map[val] >= min_vol)
-			break;
-
-	if (val > LDO_VOL_MAX_IDX || vol_map[val] > max_vol)
-		return -EINVAL;
-
-	*selector = val;
 
 	return lp3971_set_bits(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo),
 			LDO_VOL_CONTR_MASK << LDO_VOL_CONTR_SHIFT(ldo),
-			val << LDO_VOL_CONTR_SHIFT(ldo));
+			selector << LDO_VOL_CONTR_SHIFT(ldo));
 }
 
 static struct regulator_ops lp3971_ldo_ops = {
@@ -202,11 +189,14 @@ static struct regulator_ops lp3971_ldo_ops = {
 	.enable = lp3971_ldo_enable,
 	.disable = lp3971_ldo_disable,
 	.get_voltage = lp3971_ldo_get_voltage,
-	.set_voltage = lp3971_ldo_set_voltage,
+	.set_voltage_sel = lp3971_ldo_set_voltage_sel,
 };
 
 static int lp3971_dcdc_list_voltage(struct regulator_dev *dev, unsigned index)
 {
+	if (index < BUCK_TARGET_VOL_MIN_IDX || index > BUCK_TARGET_VOL_MAX_IDX)
+		return -EINVAL;
+
 	return 1000 * buck_voltage_map[index];
 }
 
@@ -259,33 +249,15 @@ static int lp3971_dcdc_get_voltage(struct regulator_dev *dev)
 	return val;
 }
 
-static int lp3971_dcdc_set_voltage(struct regulator_dev *dev,
-				   int min_uV, int max_uV,
-				   unsigned int *selector)
+static int lp3971_dcdc_set_voltage_sel(struct regulator_dev *dev,
+				       unsigned int selector)
 {
 	struct lp3971 *lp3971 = rdev_get_drvdata(dev);
 	int buck = rdev_get_id(dev) - LP3971_DCDC1;
-	int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
-	const int *vol_map = buck_voltage_map;
-	u16 val;
 	int ret;
 
-	if (min_vol < vol_map[BUCK_TARGET_VOL_MIN_IDX] ||
-	    min_vol > vol_map[BUCK_TARGET_VOL_MAX_IDX])
-		return -EINVAL;
-
-	for (val = BUCK_TARGET_VOL_MIN_IDX; val <= BUCK_TARGET_VOL_MAX_IDX;
-	     val++)
-		if (vol_map[val] >= min_vol)
-			break;
-
-	if (val > BUCK_TARGET_VOL_MAX_IDX || vol_map[val] > max_vol)
-		return -EINVAL;
-
-	*selector = val;
-
 	ret = lp3971_set_bits(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck),
-	       BUCK_TARGET_VOL_MASK, val);
+	       BUCK_TARGET_VOL_MASK, selector);
 	if (ret)
 		return ret;
 
@@ -306,10 +278,10 @@ static struct regulator_ops lp3971_dcdc_ops = {
 	.enable = lp3971_dcdc_enable,
 	.disable = lp3971_dcdc_disable,
 	.get_voltage = lp3971_dcdc_get_voltage,
-	.set_voltage = lp3971_dcdc_set_voltage,
+	.set_voltage_sel = lp3971_dcdc_set_voltage_sel,
 };
 
-static struct regulator_desc regulators[] = {
+static const struct regulator_desc regulators[] = {
 	{
 		.name = "LDO1",
 		.id = LP3971_LDO1,
@@ -449,10 +421,15 @@ static int __devinit setup_regulators(struct lp3971 *lp3971,
 
 	/* Instantiate the regulators */
 	for (i = 0; i < pdata->num_regulators; i++) {
+		struct regulator_config config = { };
 		struct lp3971_regulator_subdev *reg = &pdata->regulators[i];
-		lp3971->rdev[i] = regulator_register(&regulators[reg->id],
-				lp3971->dev, reg->initdata, lp3971, NULL);
 
+		config.dev = lp3971->dev;
+		config.init_data = reg->initdata;
+		config.driver_data = lp3971;
+
+		lp3971->rdev[i] = regulator_register(&regulators[reg->id],
+						     &config);
 		if (IS_ERR(lp3971->rdev[i])) {
 			err = PTR_ERR(lp3971->rdev[i]);
 			dev_err(lp3971->dev, "regulator init failed: %d\n",
@@ -545,23 +522,7 @@ static struct i2c_driver lp3971_i2c_driver = {
 	.id_table = lp3971_i2c_id,
 };
 
-static int __init lp3971_module_init(void)
-{
-	int ret;
-
-	ret = i2c_add_driver(&lp3971_i2c_driver);
-	if (ret != 0)
-		pr_err("Failed to register I2C driver: %d\n", ret);
-
-	return ret;
-}
-module_init(lp3971_module_init);
-
-static void __exit lp3971_module_exit(void)
-{
-	i2c_del_driver(&lp3971_i2c_driver);
-}
-module_exit(lp3971_module_exit);
+module_i2c_driver(lp3971_i2c_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Marek Szyprowski <m.szyprowski@samsung.com>");

drivers/regulator/lp3972.c

@@ -245,6 +245,11 @@ static int lp3972_set_bits(struct lp3972 *lp3972, u8 reg, u16 mask, u16 val)
 static int lp3972_ldo_list_voltage(struct regulator_dev *dev, unsigned index)
 {
 	int ldo = rdev_get_id(dev) - LP3972_LDO1;
+
+	if (index < LP3972_LDO_VOL_MIN_IDX(ldo) ||
+	    index > LP3972_LDO_VOL_MAX_IDX(ldo))
+		return -EINVAL;
+
 	return 1000 * LP3972_LDO_VOL_VALUE_MAP(ldo)[index];
 }
 
@@ -292,34 +297,16 @@ static int lp3972_ldo_get_voltage(struct regulator_dev *dev)
 	return 1000 * LP3972_LDO_VOL_VALUE_MAP(ldo)[val];
 }
 
-static int lp3972_ldo_set_voltage(struct regulator_dev *dev,
-				  int min_uV, int max_uV,
-				  unsigned int *selector)
+static int lp3972_ldo_set_voltage_sel(struct regulator_dev *dev,
+				      unsigned int selector)
 {
 	struct lp3972 *lp3972 = rdev_get_drvdata(dev);
 	int ldo = rdev_get_id(dev) - LP3972_LDO1;
-	int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
-	const int *vol_map = LP3972_LDO_VOL_VALUE_MAP(ldo);
-	u16 val;
 	int shift, ret;
 
-	if (min_vol < vol_map[LP3972_LDO_VOL_MIN_IDX(ldo)] ||
-	    min_vol > vol_map[LP3972_LDO_VOL_MAX_IDX(ldo)])
-		return -EINVAL;
-
-	for (val = LP3972_LDO_VOL_MIN_IDX(ldo);
-		val <= LP3972_LDO_VOL_MAX_IDX(ldo); val++)
-		if (vol_map[val] >= min_vol)
-			break;
-
-	if (val > LP3972_LDO_VOL_MAX_IDX(ldo) || vol_map[val] > max_vol)
-		return -EINVAL;
-
-	*selector = val;
-
 	shift = LP3972_LDO_VOL_CONTR_SHIFT(ldo);
 	ret = lp3972_set_bits(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo),
-		LP3972_LDO_VOL_MASK(ldo) << shift, val << shift);
+		LP3972_LDO_VOL_MASK(ldo) << shift, selector << shift);
 
 	if (ret)
 		return ret;
@@ -355,12 +342,17 @@ static struct regulator_ops lp3972_ldo_ops = {
 	.enable = lp3972_ldo_enable,
 	.disable = lp3972_ldo_disable,
 	.get_voltage = lp3972_ldo_get_voltage,
-	.set_voltage = lp3972_ldo_set_voltage,
+	.set_voltage_sel = lp3972_ldo_set_voltage_sel,
 };
 
 static int lp3972_dcdc_list_voltage(struct regulator_dev *dev, unsigned index)
 {
 	int buck = rdev_get_id(dev) - LP3972_DCDC1;
+
+	if (index < LP3972_BUCK_VOL_MIN_IDX(buck) ||
+	    index > LP3972_BUCK_VOL_MAX_IDX(buck))
+		return -EINVAL;
+
 	return 1000 * buck_voltage_map[buck][index];
 }
 
@@ -419,34 +411,15 @@ static int lp3972_dcdc_get_voltage(struct regulator_dev *dev)
 	return val;
 }
 
-static int lp3972_dcdc_set_voltage(struct regulator_dev *dev,
-				   int min_uV, int max_uV,
-				   unsigned int *selector)
+static int lp3972_dcdc_set_voltage_sel(struct regulator_dev *dev,
+				       unsigned int selector)
 {
 	struct lp3972 *lp3972 = rdev_get_drvdata(dev);
 	int buck = rdev_get_id(dev) - LP3972_DCDC1;
-	int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
-	const int *vol_map = buck_voltage_map[buck];
-	u16 val;
 	int ret;
 
-	if (min_vol < vol_map[LP3972_BUCK_VOL_MIN_IDX(buck)] ||
-	    min_vol > vol_map[LP3972_BUCK_VOL_MAX_IDX(buck)])
-		return -EINVAL;
-
-	for (val = LP3972_BUCK_VOL_MIN_IDX(buck);
-		val <= LP3972_BUCK_VOL_MAX_IDX(buck); val++)
-		if (vol_map[val] >= min_vol)
-			break;
-
-	if (val > LP3972_BUCK_VOL_MAX_IDX(buck) ||
-	    vol_map[val] > max_vol)
-		return -EINVAL;
-
-	*selector = val;
-
 	ret = lp3972_set_bits(lp3972, LP3972_BUCK_VOL1_REG(buck),
-				LP3972_BUCK_VOL_MASK, val);
+				LP3972_BUCK_VOL_MASK, selector);
 	if (ret)
 		return ret;
 
@@ -468,10 +441,10 @@ static struct regulator_ops lp3972_dcdc_ops = {
 	.enable = lp3972_dcdc_enable,
 	.disable = lp3972_dcdc_disable,
 	.get_voltage = lp3972_dcdc_get_voltage,
-	.set_voltage = lp3972_dcdc_set_voltage,
+	.set_voltage_sel = lp3972_dcdc_set_voltage_sel,
 };
 
-static struct regulator_desc regulators[] = {
+static const struct regulator_desc regulators[] = {
 	{
 		.name = "LDO1",
 		.id = LP3972_LDO1,
@@ -554,9 +527,14 @@ static int __devinit setup_regulators(struct lp3972 *lp3972,
 	/* Instantiate the regulators */
 	for (i = 0; i < pdata->num_regulators; i++) {
 		struct lp3972_regulator_subdev *reg = &pdata->regulators[i];
-		lp3972->rdev[i] = regulator_register(&regulators[reg->id],
-				lp3972->dev, reg->initdata, lp3972, NULL);
+		struct regulator_config config = { };
+
+		config.dev = lp3972->dev;
+		config.init_data = reg->initdata;
+		config.driver_data = lp3972;
 
+		lp3972->rdev[i] = regulator_register(&regulators[reg->id],
+						     &config);
 		if (IS_ERR(lp3972->rdev[i])) {
 			err = PTR_ERR(lp3972->rdev[i]);
 			dev_err(lp3972->dev, "regulator init failed: %d\n",

drivers/regulator/max1586.c

@@ -161,7 +161,7 @@ static struct regulator_ops max1586_v6_ops = {
 	.list_voltage = max1586_v6_list,
 };
 
-static struct regulator_desc max1586_reg[] = {
+static const struct regulator_desc max1586_reg[] = {
 	{
 		.name = "Output_V3",
 		.id = MAX1586_V3,
@@ -185,21 +185,21 @@ static int __devinit max1586_pmic_probe(struct i2c_client *client,
 {
 	struct regulator_dev **rdev;
 	struct max1586_platform_data *pdata = client->dev.platform_data;
+	struct regulator_config config = { };
 	struct max1586_data *max1586;
 	int i, id, ret = -ENOMEM;
 
-	max1586 = kzalloc(sizeof(struct max1586_data) +
+	max1586 = devm_kzalloc(&client->dev, sizeof(struct max1586_data) +
 			sizeof(struct regulator_dev *) * (MAX1586_V6 + 1),
 			GFP_KERNEL);
 	if (!max1586)
-		goto out;
+		return -ENOMEM;
 
 	max1586->client = client;
 
-	if (!pdata->v3_gain) {
-		ret = -EINVAL;
-		goto out_unmap;
-	}
+	if (!pdata->v3_gain)
+		return -EINVAL;
+
 	max1586->min_uV = MAX1586_V3_MIN_UV / 1000 * pdata->v3_gain / 1000;
 	max1586->max_uV = MAX1586_V3_MAX_UV / 1000 * pdata->v3_gain / 1000;
 
@@ -212,9 +212,12 @@ static int __devinit max1586_pmic_probe(struct i2c_client *client,
 			dev_err(&client->dev, "invalid regulator id %d\n", id);
 			goto err;
 		}
-		rdev[i] = regulator_register(&max1586_reg[id], &client->dev,
-					     pdata->subdevs[i].platform_data,
-					     max1586, NULL);
+
+		config.dev = &client->dev;
+		config.init_data = pdata->subdevs[i].platform_data;
+		config.driver_data = max1586;
+
+		rdev[i] = regulator_register(&max1586_reg[id], &config);
 		if (IS_ERR(rdev[i])) {
 			ret = PTR_ERR(rdev[i]);
 			dev_err(&client->dev, "failed to register %s\n",
@@ -230,9 +233,6 @@ static int __devinit max1586_pmic_probe(struct i2c_client *client,
 err:
 	while (--i >= 0)
 		regulator_unregister(rdev[i]);
-out_unmap:
-	kfree(max1586);
-out:
 	return ret;
 }
 
@@ -244,8 +244,6 @@ static int __devexit max1586_pmic_remove(struct i2c_client *client)
 	for (i = 0; i <= MAX1586_V6; i++)
 		if (max1586->rdev[i])
 			regulator_unregister(max1586->rdev[i]);
-	kfree(max1586);
-
 	return 0;
 }
 

drivers/regulator/max8649.c

@@ -207,7 +207,7 @@ static struct regulator_ops max8649_dcdc_ops = {
 
 };
 
-static struct regulator_desc dcdc_desc = {
+static const struct regulator_desc dcdc_desc = {
 	.name		= "max8649",
 	.ops		= &max8649_dcdc_ops,
 	.type		= REGULATOR_VOLTAGE,
@@ -225,21 +225,23 @@ static int __devinit max8649_regulator_probe(struct i2c_client *client,
 {
 	struct max8649_platform_data *pdata = client->dev.platform_data;
 	struct max8649_regulator_info *info = NULL;
+	struct regulator_config config = { };
 	unsigned int val;
 	unsigned char data;
 	int ret;
 
-	info = kzalloc(sizeof(struct max8649_regulator_info), GFP_KERNEL);
+	info = devm_kzalloc(&client->dev, sizeof(struct max8649_regulator_info),
+			    GFP_KERNEL);
 	if (!info) {
 		dev_err(&client->dev, "No enough memory\n");
 		return -ENOMEM;
 	}
 
-	info->regmap = regmap_init_i2c(client, &max8649_regmap_config);
+	info->regmap = devm_regmap_init_i2c(client, &max8649_regmap_config);
 	if (IS_ERR(info->regmap)) {
 		ret = PTR_ERR(info->regmap);
 		dev_err(&client->dev, "Failed to allocate register map: %d\n", ret);
-		goto fail;
+		return ret;
 	}
 
 	info->dev = &client->dev;
@@ -267,7 +269,7 @@ static int __devinit max8649_regulator_probe(struct i2c_client *client,
 	if (ret != 0) {
 		dev_err(info->dev, "Failed to detect ID of MAX8649:%d\n",
 			ret);
-		goto out;
+		return ret;
 	}
 	dev_info(info->dev, "Detected MAX8649 (ID:%x)\n", val);
 
@@ -297,22 +299,18 @@ static int __devinit max8649_regulator_probe(struct i2c_client *client,
 				   MAX8649_RAMP_DOWN);
 	}
 
-	info->regulator = regulator_register(&dcdc_desc, &client->dev,
-					     pdata->regulator, info, NULL);
+	config.dev = &client->dev;
+	config.init_data = pdata->regulator;
+	config.driver_data = info;
+
+	info->regulator = regulator_register(&dcdc_desc, &config);
 	if (IS_ERR(info->regulator)) {
 		dev_err(info->dev, "failed to register regulator %s\n",
 			dcdc_desc.name);
-		ret = PTR_ERR(info->regulator);
-		goto out;
+		return PTR_ERR(info->regulator);
 	}
 
-	dev_info(info->dev, "Max8649 regulator device is detected.\n");
 	return 0;
-out:
-	regmap_exit(info->regmap);
-fail:
-	kfree(info);
-	return ret;
 }
 
 static int __devexit max8649_regulator_remove(struct i2c_client *client)
@@ -322,8 +320,6 @@ static int __devexit max8649_regulator_remove(struct i2c_client *client)
 	if (info) {
 		if (info->regulator)
 			regulator_unregister(info->regulator);
-		regmap_exit(info->regmap);
-		kfree(info);
 	}
 
 	return 0;

drivers/regulator/max8660.c

@@ -313,7 +313,7 @@ static struct regulator_ops max8660_ldo67_ops = {
 	.set_voltage = max8660_ldo67_set,
 };
 
-static struct regulator_desc max8660_reg[] = {
+static const struct regulator_desc max8660_reg[] = {
 	{
 		.name = "V3(DCDC)",
 		.id = MAX8660_V3,
@@ -361,21 +361,20 @@ static int __devinit max8660_probe(struct i2c_client *client,
 {
 	struct regulator_dev **rdev;
 	struct max8660_platform_data *pdata = client->dev.platform_data;
+	struct regulator_config config = { };
 	struct max8660 *max8660;
 	int boot_on, i, id, ret = -EINVAL;
 
 	if (pdata->num_subdevs > MAX8660_V_END) {
 		dev_err(&client->dev, "Too many regulators found!\n");
-		goto out;
+		return -EINVAL;
 	}
 
 	max8660 = kzalloc(sizeof(struct max8660) +
 			sizeof(struct regulator_dev *) * MAX8660_V_END,
 			GFP_KERNEL);
-	if (!max8660) {
-		ret = -ENOMEM;
-		goto out;
-	}
+	if (!max8660)
+		return -ENOMEM;
 
 	max8660->client = client;
 	rdev = max8660->rdev;
@@ -404,7 +403,7 @@ static int __devinit max8660_probe(struct i2c_client *client,
 	for (i = 0; i < pdata->num_subdevs; i++) {
 
 		if (!pdata->subdevs[i].platform_data)
-			goto err_free;
+			goto err_out;
 
 		boot_on = pdata->subdevs[i].platform_data->constraints.boot_on;
 
@@ -430,7 +429,7 @@ static int __devinit max8660_probe(struct i2c_client *client,
 		case MAX8660_V7:
 			if (!strcmp(i2c_id->name, "max8661")) {
 				dev_err(&client->dev, "Regulator not on this chip!\n");
-				goto err_free;
+				goto err_out;
 			}
 
 			if (boot_on)
@@ -440,7 +439,7 @@ static int __devinit max8660_probe(struct i2c_client *client,
 		default:
 			dev_err(&client->dev, "invalid regulator %s\n",
 				 pdata->subdevs[i].name);
-			goto err_free;
+			goto err_out;
 		}
 	}
 
@@ -449,9 +448,11 @@ static int __devinit max8660_probe(struct i2c_client *client,
 
 		id = pdata->subdevs[i].id;
 
-		rdev[i] = regulator_register(&max8660_reg[id], &client->dev,
-					     pdata->subdevs[i].platform_data,
-					     max8660, NULL);
+		config.dev = &client->dev;
+		config.init_data = pdata->subdevs[i].platform_data;
+		config.driver_data = max8660;
+
+		rdev[i] = regulator_register(&max8660_reg[id], &config);
 		if (IS_ERR(rdev[i])) {
 			ret = PTR_ERR(rdev[i]);
 			dev_err(&client->dev, "failed to register %s\n",
@@ -461,15 +462,12 @@ static int __devinit max8660_probe(struct i2c_client *client,
 	}
 
 	i2c_set_clientdata(client, max8660);
-	dev_info(&client->dev, "Maxim 8660/8661 regulator driver loaded\n");
 	return 0;
 
 err_unregister:
 	while (--i >= 0)
 		regulator_unregister(rdev[i]);
-err_free:
-	kfree(max8660);
-out:
+err_out:
 	return ret;
 }
 
@@ -481,8 +479,6 @@ static int __devexit max8660_remove(struct i2c_client *client)
 	for (i = 0; i < MAX8660_V_END; i++)
 		if (max8660->rdev[i])
 			regulator_unregister(max8660->rdev[i]);
-	kfree(max8660);
-
 	return 0;
 }
 

drivers/regulator/max8925-regulator.c

@@ -42,8 +42,6 @@ struct max8925_regulator_info {
 	int	max_uV;
 	int	step_uV;
 	int	vol_reg;
-	int	vol_shift;
-	int	vol_nbits;
 	int	enable_reg;
 };
 
@@ -75,8 +73,7 @@ static int max8925_set_voltage(struct regulator_dev *rdev,
 	}
 	data = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
 	*selector = data;
-	data <<= info->vol_shift;
-	mask = ((1 << info->vol_nbits) - 1) << info->vol_shift;
+	mask = rdev->desc->n_voltages - 1;
 
 	return max8925_set_bits(info->i2c, info->vol_reg, mask, data);
 }
@@ -90,8 +87,8 @@ static int max8925_get_voltage(struct regulator_dev *rdev)
 	ret = max8925_reg_read(info->i2c, info->vol_reg);
 	if (ret < 0)
 		return ret;
-	mask = ((1 << info->vol_nbits) - 1) << info->vol_shift;
-	data = (ret & mask) >> info->vol_shift;
+	mask = rdev->desc->n_voltages - 1;
+	data = ret & mask;
 
 	return max8925_list_voltage(rdev, data);
 }
@@ -163,6 +160,7 @@ static int max8925_set_dvm_disable(struct regulator_dev *rdev)
 }
 
 static struct regulator_ops max8925_regulator_sdv_ops = {
+	.list_voltage		= max8925_list_voltage,
 	.set_voltage		= max8925_set_voltage,
 	.get_voltage		= max8925_get_voltage,
 	.enable			= max8925_enable,
@@ -174,6 +172,7 @@ static struct regulator_ops max8925_regulator_sdv_ops = {
 };
 
 static struct regulator_ops max8925_regulator_ldo_ops = {
+	.list_voltage		= max8925_list_voltage,
 	.set_voltage		= max8925_set_voltage,
 	.get_voltage		= max8925_get_voltage,
 	.enable			= max8925_enable,
@@ -189,13 +188,12 @@ static struct regulator_ops max8925_regulator_ldo_ops = {
 		.type	= REGULATOR_VOLTAGE,			\
 		.id	= MAX8925_ID_SD##_id,			\
 		.owner	= THIS_MODULE,				\
+		.n_voltages = 64,				\
 	},							\
 	.min_uV		= min * 1000,				\
 	.max_uV		= max * 1000,				\
 	.step_uV	= step * 1000,				\
 	.vol_reg	= MAX8925_SDV##_id,			\
-	.vol_shift	= 0,					\
-	.vol_nbits	= 6,					\
 	.enable_reg	= MAX8925_SDCTL##_id,			\
 }
 
@@ -207,13 +205,12 @@ static struct regulator_ops max8925_regulator_ldo_ops = {
 		.type	= REGULATOR_VOLTAGE,			\
 		.id	= MAX8925_ID_LDO##_id,			\
 		.owner	= THIS_MODULE,				\
+		.n_voltages = 64,				\
 	},							\
 	.min_uV		= min * 1000,				\
 	.max_uV		= max * 1000,				\
 	.step_uV	= step * 1000,				\
 	.vol_reg	= MAX8925_LDOVOUT##_id,			\
-	.vol_shift	= 0,					\
-	.vol_nbits	= 6,					\
 	.enable_reg	= MAX8925_LDOCTL##_id,			\
 }
 
@@ -261,6 +258,7 @@ static int __devinit max8925_regulator_probe(struct platform_device *pdev)
 {
 	struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
 	struct max8925_platform_data *pdata = chip->dev->platform_data;
+	struct regulator_config config = { };
 	struct max8925_regulator_info *ri;
 	struct regulator_dev *rdev;
 
@@ -272,8 +270,11 @@ static int __devinit max8925_regulator_probe(struct platform_device *pdev)
 	ri->i2c = chip->i2c;
 	ri->chip = chip;
 
-	rdev = regulator_register(&ri->desc, &pdev->dev,
-				  pdata->regulator[pdev->id], ri, NULL);
+	config.dev = &pdev->dev;
+	config.init_data = pdata->regulator[pdev->id];
+	config.driver_data = ri;
+
+	rdev = regulator_register(&ri->desc, &config);
 	if (IS_ERR(rdev)) {
 		dev_err(&pdev->dev, "failed to register regulator %s\n",
 				ri->desc.name);

drivers/regulator/max8952.c

@@ -130,11 +130,10 @@ static int max8952_get_voltage(struct regulator_dev *rdev)
 	return max8952_voltage(max8952, vid);
 }
 
-static int max8952_set_voltage(struct regulator_dev *rdev,
-			       int min_uV, int max_uV, unsigned *selector)
+static int max8952_set_voltage_sel(struct regulator_dev *rdev,
+				   unsigned selector)
 {
 	struct max8952_data *max8952 = rdev_get_drvdata(rdev);
-	s8 vid = -1, i;
 
 	if (!gpio_is_valid(max8952->pdata->gpio_vid0) ||
 			!gpio_is_valid(max8952->pdata->gpio_vid1)) {
@@ -142,23 +141,10 @@ static int max8952_set_voltage(struct regulator_dev *rdev,
 		return -EPERM;
 	}
 
-	for (i = 0; i < MAX8952_NUM_DVS_MODE; i++) {
-		int volt = max8952_voltage(max8952, i);
-
-		/* Set the voltage as low as possible within the range */
-		if (volt <= max_uV && volt >= min_uV)
-			if (vid == -1 || max8952_voltage(max8952, vid) > volt)
-				vid = i;
-	}
-
-	if (vid >= 0 && vid < MAX8952_NUM_DVS_MODE) {
-		max8952->vid0 = (vid % 2 == 1);
-		max8952->vid1 = (((vid >> 1) % 2) == 1);
-		*selector = vid;
+	max8952->vid0 = selector & 0x1;
+	max8952->vid1 = (selector >> 1) & 0x1;
 	gpio_set_value(max8952->pdata->gpio_vid0, max8952->vid0);
 	gpio_set_value(max8952->pdata->gpio_vid1, max8952->vid1);
-	} else
-		return -EINVAL;
 
 	return 0;
 }
@@ -169,11 +155,11 @@ static struct regulator_ops max8952_ops = {
 	.enable			= max8952_enable,
 	.disable		= max8952_disable,
 	.get_voltage		= max8952_get_voltage,
-	.set_voltage		= max8952_set_voltage,
+	.set_voltage_sel	= max8952_set_voltage_sel,
 	.set_suspend_disable	= max8952_disable,
 };
 
-static struct regulator_desc regulator = {
+static const struct regulator_desc regulator = {
 	.name		= "MAX8952_VOUT",
 	.id		= 0,
 	.n_voltages	= MAX8952_NUM_DVS_MODE,
@@ -187,6 +173,7 @@ static int __devinit max8952_pmic_probe(struct i2c_client *client,
 {
 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
 	struct max8952_platform_data *pdata = client->dev.platform_data;
+	struct regulator_config config = { };
 	struct max8952_data *max8952;
 
 	int ret = 0, err = 0;
@@ -207,8 +194,11 @@ static int __devinit max8952_pmic_probe(struct i2c_client *client,
 	max8952->dev = &client->dev;
 	max8952->pdata = pdata;
 
-	max8952->rdev = regulator_register(&regulator, max8952->dev,
-			&pdata->reg_data, max8952, NULL);
+	config.dev = max8952->dev;
+	config.init_data = &pdata->reg_data;
+	config.driver_data = max8952;
+
+	max8952->rdev = regulator_register(&regulator, &config);
 
 	if (IS_ERR(max8952->rdev)) {
 		ret = PTR_ERR(max8952->rdev);
@@ -217,8 +207,8 @@ static int __devinit max8952_pmic_probe(struct i2c_client *client,
 	}
 
 	max8952->en = !!(pdata->reg_data.constraints.boot_on);
-	max8952->vid0 = (pdata->default_mode % 2) == 1;
-	max8952->vid1 = ((pdata->default_mode >> 1) % 2) == 1;
+	max8952->vid0 = pdata->default_mode & 0x1;
+	max8952->vid1 = (pdata->default_mode >> 1) & 0x1;
 
 	if (gpio_is_valid(pdata->gpio_en)) {
 		if (!gpio_request(pdata->gpio_en, "MAX8952 EN"))
@@ -241,13 +231,13 @@ static int __devinit max8952_pmic_probe(struct i2c_client *client,
 			gpio_is_valid(pdata->gpio_vid1)) {
 		if (!gpio_request(pdata->gpio_vid0, "MAX8952 VID0"))
 			gpio_direction_output(pdata->gpio_vid0,
-					(pdata->default_mode) % 2);
+					(pdata->default_mode) & 0x1);
 		else
 			err = 1;
 
 		if (!gpio_request(pdata->gpio_vid1, "MAX8952 VID1"))
 			gpio_direction_output(pdata->gpio_vid1,
-				(pdata->default_mode >> 1) % 2);
+				(pdata->default_mode >> 1) & 0x1);
 		else {
 			if (!err)
 				gpio_free(pdata->gpio_vid0);

drivers/regulator/max8997.c

@@ -68,29 +68,28 @@ struct voltage_map_desc {
 	int min;
 	int max;
 	int step;
-	unsigned int n_bits;
 };
 
 /* Voltage maps in mV */
 static const struct voltage_map_desc ldo_voltage_map_desc = {
-	.min = 800,	.max = 3950,	.step = 50,	.n_bits = 6,
+	.min = 800,	.max = 3950,	.step = 50,
 }; /* LDO1 ~ 18, 21 all */
 
 static const struct voltage_map_desc buck1245_voltage_map_desc = {
-	.min = 650,	.max = 2225,	.step = 25,	.n_bits = 6,
+	.min = 650,	.max = 2225,	.step = 25,
 }; /* Buck1, 2, 4, 5 */
 
 static const struct voltage_map_desc buck37_voltage_map_desc = {
-	.min = 750,	.max = 3900,	.step = 50,	.n_bits = 6,
+	.min = 750,	.max = 3900,	.step = 50,
 }; /* Buck3, 7 */
 
 /* current map in mA */
 static const struct voltage_map_desc charger_current_map_desc = {
-	.min = 200,	.max = 950,	.step = 50,	.n_bits = 4,
+	.min = 200,	.max = 950,	.step = 50,
 };
 
 static const struct voltage_map_desc topoff_current_map_desc = {
-	.min = 50,	.max = 200,	.step = 10,	.n_bits = 4,
+	.min = 50,	.max = 200,	.step = 10,
 };
 
 static const struct voltage_map_desc *reg_voltage_map[] = {
@@ -320,6 +319,7 @@ static int max8997_reg_disable(struct regulator_dev *rdev)
 static int max8997_get_voltage_register(struct regulator_dev *rdev,
 		int *_reg, int *_shift, int *_mask)
 {
+	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
 	int rid = rdev_get_id(rdev);
 	int reg, shift = 0, mask = 0x3f;
 
@@ -329,9 +329,13 @@ static int max8997_get_voltage_register(struct regulator_dev *rdev,
 		break;
 	case MAX8997_BUCK1:
 		reg = MAX8997_REG_BUCK1DVS1;
+		if (max8997->buck1_gpiodvs)
+			reg += max8997->buck125_gpioindex;
 		break;
 	case MAX8997_BUCK2:
 		reg = MAX8997_REG_BUCK2DVS1;
+		if (max8997->buck2_gpiodvs)
+			reg += max8997->buck125_gpioindex;
 		break;
 	case MAX8997_BUCK3:
 		reg = MAX8997_REG_BUCK3DVS;
@@ -341,6 +345,8 @@ static int max8997_get_voltage_register(struct regulator_dev *rdev,
 		break;
 	case MAX8997_BUCK5:
 		reg = MAX8997_REG_BUCK5DVS1;
+		if (max8997->buck5_gpiodvs)
+			reg += max8997->buck125_gpioindex;
 		break;
 	case MAX8997_BUCK7:
 		reg = MAX8997_REG_BUCK7DVS;
@@ -381,18 +387,12 @@ static int max8997_get_voltage(struct regulator_dev *rdev)
 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
 	struct i2c_client *i2c = max8997->iodev->i2c;
 	int reg, shift, mask, ret;
-	int rid = rdev_get_id(rdev);
 	u8 val;
 
 	ret = max8997_get_voltage_register(rdev, &reg, &shift, &mask);
 	if (ret)
 		return ret;
 
-	if ((rid == MAX8997_BUCK1 && max8997->buck1_gpiodvs) ||
-			(rid == MAX8997_BUCK2 && max8997->buck2_gpiodvs) ||
-			(rid == MAX8997_BUCK5 && max8997->buck5_gpiodvs))
-		reg += max8997->buck125_gpioindex;
-
 	ret = max8997_read_reg(i2c, reg, &val);
 	if (ret)
 		return ret;
@@ -415,7 +415,7 @@ static inline int max8997_get_voltage_proper_val(
 		const struct voltage_map_desc *desc,
 		int min_vol, int max_vol)
 {
-	int i = 0;
+	int i;
 
 	if (desc == NULL)
 		return -EINVAL;
@@ -423,14 +423,12 @@ static inline int max8997_get_voltage_proper_val(
 	if (max_vol < desc->min || min_vol > desc->max)
 		return -EINVAL;
 
-	while (desc->min + desc->step * i < min_vol &&
-			desc->min + desc->step * i < desc->max)
-		i++;
+	if (min_vol < desc->min)
+		min_vol = desc->min;
 
-	if (desc->min + desc->step * i > max_vol)
-		return -EINVAL;
+	i = DIV_ROUND_UP(min_vol - desc->min, desc->step);
 
-	if (i >= (1 << desc->n_bits))
+	if (desc->min + desc->step * i > max_vol)
 		return -EINVAL;
 
 	return i;
@@ -854,109 +852,65 @@ static struct regulator_ops max8997_charger_fixedstate_ops = {
 	.set_current_limit	= max8997_set_voltage_ldobuck_wrap,
 };
 
-#define regulator_desc_ldo(num)		{	\
-	.name		= "LDO"#num,		\
-	.id		= MAX8997_LDO##num,	\
-	.ops		= &max8997_ldo_ops,	\
+#define MAX8997_VOLTAGE_REGULATOR(_name, _ops) {\
+	.name		= #_name,		\
+	.id		= MAX8997_##_name,	\
+	.ops		= &_ops,		\
 	.type		= REGULATOR_VOLTAGE,	\
 	.owner		= THIS_MODULE,		\
 }
-#define regulator_desc_buck(num)		{	\
-	.name		= "BUCK"#num,		\
-	.id		= MAX8997_BUCK##num,	\
-	.ops		= &max8997_buck_ops,	\
-	.type		= REGULATOR_VOLTAGE,	\
+
+#define MAX8997_CURRENT_REGULATOR(_name, _ops) {\
+	.name		= #_name,		\
+	.id		= MAX8997_##_name,	\
+	.ops		= &_ops,		\
+	.type		= REGULATOR_CURRENT,	\
 	.owner		= THIS_MODULE,		\
 }
 
 static struct regulator_desc regulators[] = {
-	regulator_desc_ldo(1),
-	regulator_desc_ldo(2),
-	regulator_desc_ldo(3),
-	regulator_desc_ldo(4),
-	regulator_desc_ldo(5),
-	regulator_desc_ldo(6),
-	regulator_desc_ldo(7),
-	regulator_desc_ldo(8),
-	regulator_desc_ldo(9),
-	regulator_desc_ldo(10),
-	regulator_desc_ldo(11),
-	regulator_desc_ldo(12),
-	regulator_desc_ldo(13),
-	regulator_desc_ldo(14),
-	regulator_desc_ldo(15),
-	regulator_desc_ldo(16),
-	regulator_desc_ldo(17),
-	regulator_desc_ldo(18),
-	regulator_desc_ldo(21),
-	regulator_desc_buck(1),
-	regulator_desc_buck(2),
-	regulator_desc_buck(3),
-	regulator_desc_buck(4),
-	regulator_desc_buck(5),
-	{
-		.name	= "BUCK6",
-		.id	= MAX8997_BUCK6,
-		.ops	= &max8997_fixedvolt_ops,
-		.type	= REGULATOR_VOLTAGE,
-		.owner	= THIS_MODULE,
-	},
-	regulator_desc_buck(7),
-	{
-		.name	= "EN32KHz_AP",
-		.id	= MAX8997_EN32KHZ_AP,
-		.ops	= &max8997_fixedvolt_ops,
-		.type	= REGULATOR_VOLTAGE,
-		.owner	= THIS_MODULE,
-	}, {
-		.name	= "EN32KHz_CP",
-		.id	= MAX8997_EN32KHZ_CP,
-		.ops	= &max8997_fixedvolt_ops,
-		.type	= REGULATOR_VOLTAGE,
-		.owner	= THIS_MODULE,
-	}, {
-		.name	= "ENVICHG",
-		.id	= MAX8997_ENVICHG,
-		.ops	= &max8997_fixedvolt_ops,
-		.type	= REGULATOR_VOLTAGE,
-		.owner	= THIS_MODULE,
-	}, {
-		.name	= "ESAFEOUT1",
-		.id	= MAX8997_ESAFEOUT1,
-		.ops	= &max8997_safeout_ops,
-		.type	= REGULATOR_VOLTAGE,
-		.owner	 = THIS_MODULE,
-	}, {
-		.name	= "ESAFEOUT2",
-		.id	= MAX8997_ESAFEOUT2,
-		.ops	= &max8997_safeout_ops,
-		.type	= REGULATOR_VOLTAGE,
-		.owner	 = THIS_MODULE,
-	}, {
-		.name	= "CHARGER_CV",
-		.id	= MAX8997_CHARGER_CV,
-		.ops	= &max8997_fixedstate_ops,
-		.type	= REGULATOR_VOLTAGE,
-		.owner	 = THIS_MODULE,
-	}, {
-		.name	= "CHARGER",
-		.id	= MAX8997_CHARGER,
-		.ops	= &max8997_charger_ops,
-		.type	= REGULATOR_CURRENT,
-		.owner	 = THIS_MODULE,
-	}, {
-		.name	= "CHARGER_TOPOFF",
-		.id	= MAX8997_CHARGER_TOPOFF,
-		.ops	= &max8997_charger_fixedstate_ops,
-		.type	= REGULATOR_CURRENT,
-		.owner	 = THIS_MODULE,
-	},
+	MAX8997_VOLTAGE_REGULATOR(LDO1, max8997_ldo_ops),
+	MAX8997_VOLTAGE_REGULATOR(LDO2, max8997_ldo_ops),
+	MAX8997_VOLTAGE_REGULATOR(LDO3, max8997_ldo_ops),
+	MAX8997_VOLTAGE_REGULATOR(LDO4, max8997_ldo_ops),
+	MAX8997_VOLTAGE_REGULATOR(LDO5, max8997_ldo_ops),
+	MAX8997_VOLTAGE_REGULATOR(LDO6, max8997_ldo_ops),
+	MAX8997_VOLTAGE_REGULATOR(LDO7, max8997_ldo_ops),
+	MAX8997_VOLTAGE_REGULATOR(LDO8, max8997_ldo_ops),
+	MAX8997_VOLTAGE_REGULATOR(LDO9, max8997_ldo_ops),
+	MAX8997_VOLTAGE_REGULATOR(LDO10, max8997_ldo_ops),
+	MAX8997_VOLTAGE_REGULATOR(LDO11, max8997_ldo_ops),
+	MAX8997_VOLTAGE_REGULATOR(LDO12, max8997_ldo_ops),
+	MAX8997_VOLTAGE_REGULATOR(LDO13, max8997_ldo_ops),
+	MAX8997_VOLTAGE_REGULATOR(LDO14, max8997_ldo_ops),
+	MAX8997_VOLTAGE_REGULATOR(LDO15, max8997_ldo_ops),
+	MAX8997_VOLTAGE_REGULATOR(LDO16, max8997_ldo_ops),
+	MAX8997_VOLTAGE_REGULATOR(LDO17, max8997_ldo_ops),
+	MAX8997_VOLTAGE_REGULATOR(LDO18, max8997_ldo_ops),
+	MAX8997_VOLTAGE_REGULATOR(LDO21, max8997_ldo_ops),
+	MAX8997_VOLTAGE_REGULATOR(BUCK1, max8997_buck_ops),
+	MAX8997_VOLTAGE_REGULATOR(BUCK2, max8997_buck_ops),
+	MAX8997_VOLTAGE_REGULATOR(BUCK3, max8997_buck_ops),
+	MAX8997_VOLTAGE_REGULATOR(BUCK4, max8997_buck_ops),
+	MAX8997_VOLTAGE_REGULATOR(BUCK5, max8997_buck_ops),
+	MAX8997_VOLTAGE_REGULATOR(BUCK6, max8997_fixedvolt_ops),
+	MAX8997_VOLTAGE_REGULATOR(BUCK7, max8997_buck_ops),
+	MAX8997_VOLTAGE_REGULATOR(EN32KHZ_AP, max8997_fixedvolt_ops),
+	MAX8997_VOLTAGE_REGULATOR(EN32KHZ_CP, max8997_fixedvolt_ops),
+	MAX8997_VOLTAGE_REGULATOR(ENVICHG, max8997_fixedvolt_ops),
+	MAX8997_VOLTAGE_REGULATOR(ESAFEOUT1, max8997_safeout_ops),
+	MAX8997_VOLTAGE_REGULATOR(ESAFEOUT2, max8997_safeout_ops),
+	MAX8997_VOLTAGE_REGULATOR(CHARGER_CV, max8997_fixedstate_ops),
+	MAX8997_CURRENT_REGULATOR(CHARGER, max8997_charger_ops),
+	MAX8997_CURRENT_REGULATOR(CHARGER_TOPOFF,
+				  max8997_charger_fixedstate_ops),
 };
 
 static __devinit int max8997_pmic_probe(struct platform_device *pdev)
 {
 	struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
 	struct max8997_platform_data *pdata = dev_get_platdata(iodev->dev);
+	struct regulator_config config = { };
 	struct regulator_dev **rdev;
 	struct max8997_data *max8997;
 	struct i2c_client *i2c;
@@ -1140,8 +1094,11 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
 		else if (id == MAX8997_CHARGER_CV)
 			regulators[id].n_voltages = 16;
 
-		rdev[i] = regulator_register(&regulators[id], max8997->dev,
-				pdata->regulators[i].initdata, max8997, NULL);
+		config.dev = max8997->dev;
+		config.init_data = pdata->regulators[i].initdata;
+		config.driver_data = max8997;
+
+		rdev[i] = regulator_register(&regulators[id], &config);
 		if (IS_ERR(rdev[i])) {
 			ret = PTR_ERR(rdev[i]);
 			dev_err(max8997->dev, "regulator init failed for %d\n",

drivers/regulator/max8998.c

@@ -277,7 +277,7 @@ static int max8998_get_voltage_register(struct regulator_dev *rdev,
 	return 0;
 }
 
-static int max8998_get_voltage(struct regulator_dev *rdev)
+static int max8998_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct max8998_data *max8998 = rdev_get_drvdata(rdev);
 	struct i2c_client *i2c = max8998->iodev->i2c;
@@ -295,7 +295,7 @@ static int max8998_get_voltage(struct regulator_dev *rdev)
 	val >>= shift;
 	val &= mask;
 
-	return max8998_list_voltage(rdev, val);
+	return val;
 }
 
 static int max8998_set_voltage_ldo(struct regulator_dev *rdev,
@@ -306,8 +306,7 @@ static int max8998_set_voltage_ldo(struct regulator_dev *rdev,
 	int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
 	const struct voltage_map_desc *desc;
 	int ldo = rdev_get_id(rdev);
-	int reg, shift = 0, mask, ret;
-	int i = 0;
+	int reg, shift = 0, mask, ret, i;
 
 	if (ldo >= ARRAY_SIZE(ldo_voltage_map))
 		return -EINVAL;
@@ -319,9 +318,10 @@ static int max8998_set_voltage_ldo(struct regulator_dev *rdev,
 	if (max_vol < desc->min || min_vol > desc->max)
 		return -EINVAL;
 
-	while (desc->min + desc->step*i < min_vol &&
-	       desc->min + desc->step*i < desc->max)
-		i++;
+	if (min_vol < desc->min)
+		min_vol = desc->min;
+
+	i = DIV_ROUND_UP(min_vol - desc->min, desc->step);
 
 	if (desc->min + desc->step*i > max_vol)
 		return -EINVAL;
@@ -359,8 +359,7 @@ static int max8998_set_voltage_buck(struct regulator_dev *rdev,
 	const struct voltage_map_desc *desc;
 	int buck = rdev_get_id(rdev);
 	int reg, shift = 0, mask, ret;
-	int difference = 0, i = 0, j = 0, previous_vol = 0;
-	u8 val = 0;
+	int i, j, previous_sel;
 	static u8 buck1_last_val;
 
 	if (buck >= ARRAY_SIZE(ldo_voltage_map))
@@ -374,9 +373,10 @@ static int max8998_set_voltage_buck(struct regulator_dev *rdev,
 	if (max_vol < desc->min || min_vol > desc->max)
 		return -EINVAL;
 
-	while (desc->min + desc->step*i < min_vol &&
-	       desc->min + desc->step*i < desc->max)
-		i++;
+	if (min_vol < desc->min)
+		min_vol = desc->min;
+
+	i = DIV_ROUND_UP(min_vol - desc->min, desc->step);
 
 	if (desc->min + desc->step*i > max_vol)
 		return -EINVAL;
@@ -387,13 +387,14 @@ static int max8998_set_voltage_buck(struct regulator_dev *rdev,
 	if (ret)
 		return ret;
 
-	previous_vol = max8998_get_voltage(rdev);
+	previous_sel = max8998_get_voltage_sel(rdev);
 
 	/* Check if voltage needs to be changed */
 	/* if previous_voltage equal new voltage, return */
-	if (previous_vol == max8998_list_voltage(rdev, i)) {
+	if (previous_sel == i) {
 		dev_dbg(max8998->dev, "No voltage change, old:%d, new:%d\n",
-			previous_vol, max8998_list_voltage(rdev, i));
+			max8998_list_voltage(rdev, previous_sel),
+			max8998_list_voltage(rdev, i));
 		return ret;
 	}
 
@@ -482,19 +483,40 @@ static int max8998_set_voltage_buck(struct regulator_dev *rdev,
 		break;
 	}
 
+	return ret;
+}
+
+static int max8998_set_voltage_buck_time_sel(struct regulator_dev *rdev,
+					     unsigned int old_selector,
+					     unsigned int new_selector)
+{
+	struct max8998_data *max8998 = rdev_get_drvdata(rdev);
+	struct i2c_client *i2c = max8998->iodev->i2c;
+	const struct voltage_map_desc *desc;
+	int buck = rdev_get_id(rdev);
+	u8 val = 0;
+	int difference, ret;
+
+	if (buck < MAX8998_BUCK1 || buck > MAX8998_BUCK4)
+		return -EINVAL;
+
+	desc = ldo_voltage_map[buck];
+
 	/* Voltage stabilization */
-	max8998_read_reg(i2c, MAX8998_REG_ONOFF4, &val);
+	ret = max8998_read_reg(i2c, MAX8998_REG_ONOFF4, &val);
+	if (ret)
+		return ret;
 
 	/* lp3974 hasn't got ENRAMP bit - ramp is assumed as true */
 	/* MAX8998 has ENRAMP bit implemented, so test it*/
 	if (max8998->iodev->type == TYPE_MAX8998 && !(val & MAX8998_ENRAMP))
-		return ret;
+		return 0;
 
-	difference = desc->min + desc->step*i - previous_vol/1000;
+	difference = (new_selector - old_selector) * desc->step;
 	if (difference > 0)
-		udelay(difference / ((val & 0x0f) + 1));
+		return difference / ((val & 0x0f) + 1);
 
-	return ret;
+	return 0;
 }
 
 static struct regulator_ops max8998_ldo_ops = {
@@ -502,7 +524,7 @@ static struct regulator_ops max8998_ldo_ops = {
 	.is_enabled		= max8998_ldo_is_enabled,
 	.enable			= max8998_ldo_enable,
 	.disable		= max8998_ldo_disable,
-	.get_voltage		= max8998_get_voltage,
+	.get_voltage_sel	= max8998_get_voltage_sel,
 	.set_voltage		= max8998_set_voltage_ldo,
 	.set_suspend_enable	= max8998_ldo_enable,
 	.set_suspend_disable	= max8998_ldo_disable,
@@ -513,8 +535,9 @@ static struct regulator_ops max8998_buck_ops = {
 	.is_enabled		= max8998_ldo_is_enabled,
 	.enable			= max8998_ldo_enable,
 	.disable		= max8998_ldo_disable,
-	.get_voltage		= max8998_get_voltage,
+	.get_voltage_sel	= max8998_get_voltage_sel,
 	.set_voltage		= max8998_set_voltage_buck,
+	.set_voltage_time_sel	= max8998_set_voltage_buck_time_sel,
 	.set_suspend_enable	= max8998_ldo_enable,
 	.set_suspend_disable	= max8998_ldo_disable,
 };
@@ -685,6 +708,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 {
 	struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent);
 	struct max8998_platform_data *pdata = dev_get_platdata(iodev->dev);
+	struct regulator_config config = { };
 	struct regulator_dev **rdev;
 	struct max8998_data *max8998;
 	struct i2c_client *i2c;
@@ -840,8 +864,12 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 			int count = (desc->max - desc->min) / desc->step + 1;
 			regulators[index].n_voltages = count;
 		}
-		rdev[i] = regulator_register(&regulators[index], max8998->dev,
-				pdata->regulators[i].initdata, max8998, NULL);
+
+		config.dev = max8998->dev;
+		config.init_data = pdata->regulators[i].initdata;
+		config.driver_data = max8998;
+
+		rdev[i] = regulator_register(&regulators[index], &config);
 		if (IS_ERR(rdev[i])) {
 			ret = PTR_ERR(rdev[i]);
 			dev_err(max8998->dev, "regulator init failed\n");

drivers/regulator/mc13783-regulator.c

@@ -340,6 +340,7 @@ static int __devinit mc13783_regulator_probe(struct platform_device *pdev)
 	struct mc13xxx_regulator_platform_data *pdata =
 		dev_get_platdata(&pdev->dev);
 	struct mc13xxx_regulator_init_data *init_data;
+	struct regulator_config config = { };
 	int i, ret;
 
 	dev_dbg(&pdev->dev, "%s id %d\n", __func__, pdev->id);
@@ -357,11 +358,16 @@ static int __devinit mc13783_regulator_probe(struct platform_device *pdev)
 	priv->mc13xxx = mc13783;
 
 	for (i = 0; i < pdata->num_regulators; i++) {
+		struct regulator_desc *desc;
+
 		init_data = &pdata->regulators[i];
-		priv->regulators[i] = regulator_register(
-				&mc13783_regulators[init_data->id].desc,
-				&pdev->dev, init_data->init_data, priv, NULL);
+		desc = &mc13783_regulators[init_data->id].desc;
+
+		config.dev = &pdev->dev;
+		config.init_data = init_data->init_data;
+		config.driver_data = priv;
 
+		priv->regulators[i] = regulator_register(desc, &config);
 		if (IS_ERR(priv->regulators[i])) {
 			dev_err(&pdev->dev, "failed to register regulator %s\n",
 				mc13783_regulators[i].desc.name);

drivers/regulator/mc13892-regulator.c

@@ -428,24 +428,15 @@ static int mc13892_sw_regulator_get_voltage(struct regulator_dev *rdev)
 	return val;
 }
 
-static int mc13892_sw_regulator_set_voltage(struct regulator_dev *rdev,
-		int min_uV, int max_uV, unsigned *selector)
+static int mc13892_sw_regulator_set_voltage_sel(struct regulator_dev *rdev,
+						unsigned selector)
 {
 	struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev);
 	int hi, value, mask, id = rdev_get_id(rdev);
 	u32 valread;
 	int ret;
 
-	dev_dbg(rdev_get_dev(rdev), "%s id: %d min_uV: %d max_uV: %d\n",
-		__func__, id, min_uV, max_uV);
-
-	/* Find the best index */
-	value = mc13xxx_get_best_voltage_index(rdev, min_uV, max_uV);
-	dev_dbg(rdev_get_dev(rdev), "%s best value: %d\n", __func__, value);
-	if (value < 0)
-		return value;
-
-	value = mc13892_regulators[id].voltages[value];
+	value = mc13892_regulators[id].voltages[selector];
 
 	mc13xxx_lock(priv->mc13xxx);
 	ret = mc13xxx_reg_read(priv->mc13xxx,
@@ -480,7 +471,7 @@ static int mc13892_sw_regulator_set_voltage(struct regulator_dev *rdev,
 static struct regulator_ops mc13892_sw_regulator_ops = {
 	.is_enabled = mc13xxx_sw_regulator_is_enabled,
 	.list_voltage = mc13xxx_regulator_list_voltage,
-	.set_voltage = mc13892_sw_regulator_set_voltage,
+	.set_voltage_sel = mc13892_sw_regulator_set_voltage_sel,
 	.get_voltage = mc13892_sw_regulator_get_voltage,
 };
 
@@ -528,6 +519,7 @@ static int __devinit mc13892_regulator_probe(struct platform_device *pdev)
 	struct mc13xxx_regulator_platform_data *pdata =
 		dev_get_platdata(&pdev->dev);
 	struct mc13xxx_regulator_init_data *mc13xxx_data;
+	struct regulator_config config = { };
 	int i, ret;
 	int num_regulators = 0;
 	u32 val;
@@ -597,9 +589,12 @@ static int __devinit mc13892_regulator_probe(struct platform_device *pdev)
 		}
 		desc = &mc13892_regulators[id].desc;
 
-		priv->regulators[i] = regulator_register(
-			desc, &pdev->dev, init_data, priv, node);
+		config.dev = &pdev->dev;
+		config.init_data = init_data;
+		config.driver_data = priv;
+		config.of_node = node;
 
+		priv->regulators[i] = regulator_register(desc, &config);
 		if (IS_ERR(priv->regulators[i])) {
 			dev_err(&pdev->dev, "failed to register regulator %s\n",
 				mc13892_regulators[i].desc.name);

drivers/regulator/mc13xxx-regulator-core.c

@@ -94,62 +94,18 @@ int mc13xxx_regulator_list_voltage(struct regulator_dev *rdev,
 }
 EXPORT_SYMBOL_GPL(mc13xxx_regulator_list_voltage);
 
-int mc13xxx_get_best_voltage_index(struct regulator_dev *rdev,
-						int min_uV, int max_uV)
-{
-	struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev);
-	struct mc13xxx_regulator *mc13xxx_regulators = priv->mc13xxx_regulators;
-	int reg_id = rdev_get_id(rdev);
-	int i;
-	int bestmatch;
-	int bestindex;
-
-	/*
-	 * Locate the minimum voltage fitting the criteria on
-	 * this regulator. The switchable voltages are not
-	 * in strict falling order so we need to check them
-	 * all for the best match.
-	 */
-	bestmatch = INT_MAX;
-	bestindex = -1;
-	for (i = 0; i < mc13xxx_regulators[reg_id].desc.n_voltages; i++) {
-		if (mc13xxx_regulators[reg_id].voltages[i] >= min_uV &&
-		    mc13xxx_regulators[reg_id].voltages[i] < bestmatch) {
-			bestmatch = mc13xxx_regulators[reg_id].voltages[i];
-			bestindex = i;
-		}
-	}
-
-	if (bestindex < 0 || bestmatch > max_uV) {
-		dev_warn(&rdev->dev, "no possible value for %d<=x<=%d uV\n",
-				min_uV, max_uV);
-		return -EINVAL;
-	}
-	return bestindex;
-}
-EXPORT_SYMBOL_GPL(mc13xxx_get_best_voltage_index);
-
-static int mc13xxx_regulator_set_voltage(struct regulator_dev *rdev, int min_uV,
-		int max_uV, unsigned *selector)
+static int mc13xxx_regulator_set_voltage_sel(struct regulator_dev *rdev,
+					     unsigned selector)
 {
 	struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev);
 	struct mc13xxx_regulator *mc13xxx_regulators = priv->mc13xxx_regulators;
-	int value, id = rdev_get_id(rdev);
+	int id = rdev_get_id(rdev);
 	int ret;
 
-	dev_dbg(rdev_get_dev(rdev), "%s id: %d min_uV: %d max_uV: %d\n",
-		__func__, id, min_uV, max_uV);
-
-	/* Find the best index */
-	value = mc13xxx_get_best_voltage_index(rdev, min_uV, max_uV);
-	dev_dbg(rdev_get_dev(rdev), "%s best value: %d\n", __func__, value);
-	if (value < 0)
-		return value;
-
 	mc13xxx_lock(priv->mc13xxx);
 	ret = mc13xxx_reg_rmw(priv->mc13xxx, mc13xxx_regulators[id].vsel_reg,
 			mc13xxx_regulators[id].vsel_mask,
-			value << mc13xxx_regulators[id].vsel_shift);
+			selector << mc13xxx_regulators[id].vsel_shift);
 	mc13xxx_unlock(priv->mc13xxx);
 
 	return ret;
@@ -187,7 +143,7 @@ struct regulator_ops mc13xxx_regulator_ops = {
 	.disable = mc13xxx_regulator_disable,
 	.is_enabled = mc13xxx_regulator_is_enabled,
 	.list_voltage = mc13xxx_regulator_list_voltage,
-	.set_voltage = mc13xxx_regulator_set_voltage,
+	.set_voltage_sel = mc13xxx_regulator_set_voltage_sel,
 	.get_voltage = mc13xxx_regulator_get_voltage,
 };
 EXPORT_SYMBOL_GPL(mc13xxx_regulator_ops);

drivers/regulator/mc13xxx.h

@@ -35,8 +35,6 @@ struct mc13xxx_regulator_priv {
 
 extern int mc13xxx_sw_regulator(struct regulator_dev *rdev);
 extern int mc13xxx_sw_regulator_is_enabled(struct regulator_dev *rdev);
-extern int mc13xxx_get_best_voltage_index(struct regulator_dev *rdev,
-						int min_uV, int max_uV);
 extern int mc13xxx_regulator_list_voltage(struct regulator_dev *rdev,
 						unsigned selector);
 extern int mc13xxx_fixed_regulator_set_voltage(struct regulator_dev *rdev,

drivers/regulator/pcap-regulator.c

@@ -150,57 +150,33 @@ static struct pcap_regulator vreg_table[] = {
 	VREG_INFO(SW2S,  PCAP_REG_LOWPWR,  NA, 20, NA, NA), */
 };
 
-static int pcap_regulator_set_voltage(struct regulator_dev *rdev,
-				      int min_uV, int max_uV,
-				      unsigned *selector)
+static int pcap_regulator_set_voltage_sel(struct regulator_dev *rdev,
+					  unsigned selector)
 {
 	struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)];
 	void *pcap = rdev_get_drvdata(rdev);
-	int uV;
-	u8 i;
 
 	/* the regulator doesn't support voltage switching */
 	if (vreg->n_voltages == 1)
 		return -EINVAL;
 
-	for (i = 0; i < vreg->n_voltages; i++) {
-		/* For V1 the first is not the best match */
-		if (i == 0 && rdev_get_id(rdev) == V1)
-			i = 1;
-		else if (i + 1 == vreg->n_voltages && rdev_get_id(rdev) == V1)
-			i = 0;
-
-		uV = vreg->voltage_table[i] * 1000;
-		if (min_uV <= uV && uV <= max_uV) {
-			*selector = i;
 	return ezx_pcap_set_bits(pcap, vreg->reg,
 				 (vreg->n_voltages - 1) << vreg->index,
-					i << vreg->index);
-		}
-
-		if (i == 0 && rdev_get_id(rdev) == V1)
-			i = vreg->n_voltages - 1;
-	}
-
-	/* the requested voltage range is not supported by this regulator */
-	return -EINVAL;
+				 selector << vreg->index);
 }
 
-static int pcap_regulator_get_voltage(struct regulator_dev *rdev)
+static int pcap_regulator_get_voltage_sel(struct regulator_dev *rdev)
 {
 	struct pcap_regulator *vreg = &vreg_table[rdev_get_id(rdev)];
 	void *pcap = rdev_get_drvdata(rdev);
 	u32 tmp;
-	int mV;
 
 	if (vreg->n_voltages == 1)
-		return vreg->voltage_table[0] * 1000;
+		return 0;
 
 	ezx_pcap_read(pcap, vreg->reg, &tmp);
 	tmp = ((tmp >> vreg->index) & (vreg->n_voltages - 1));
-	mV = vreg->voltage_table[tmp];
-
-	return mV * 1000;
+	return tmp;
 }
 
 static int pcap_regulator_enable(struct regulator_dev *rdev)
@@ -248,8 +224,8 @@ static int pcap_regulator_list_voltage(struct regulator_dev *rdev,
 
 static struct regulator_ops pcap_regulator_ops = {
 	.list_voltage	= pcap_regulator_list_voltage,
-	.set_voltage	= pcap_regulator_set_voltage,
-	.get_voltage	= pcap_regulator_get_voltage,
+	.set_voltage_sel = pcap_regulator_set_voltage_sel,
+	.get_voltage_sel = pcap_regulator_get_voltage_sel,
 	.enable		= pcap_regulator_enable,
 	.disable	= pcap_regulator_disable,
 	.is_enabled	= pcap_regulator_is_enabled,
@@ -265,7 +241,7 @@ static struct regulator_ops pcap_regulator_ops = {
 		.owner		= THIS_MODULE,			\
 	}
 
-static struct regulator_desc pcap_regulators[] = {
+static const struct regulator_desc pcap_regulators[] = {
 	VREG(V1), VREG(V2), VREG(V3), VREG(V4), VREG(V5), VREG(V6), VREG(V7),
 	VREG(V8), VREG(V9), VREG(V10), VREG(VAUX1), VREG(VAUX2), VREG(VAUX3),
 	VREG(VAUX4), VREG(VSIM), VREG(VSIM2), VREG(VVIB), VREG(SW1), VREG(SW2),
@@ -275,9 +251,13 @@ static int __devinit pcap_regulator_probe(struct platform_device *pdev)
 {
 	struct regulator_dev *rdev;
 	void *pcap = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_config config = { };
+
+	config.dev = &pdev->dev;
+	config.init_data = pdev->dev.platform_data;
+	config.driver_data = pcap;
 
-	rdev = regulator_register(&pcap_regulators[pdev->id], &pdev->dev,
-				pdev->dev.platform_data, pcap, NULL);
+	rdev = regulator_register(&pcap_regulators[pdev->id], &config);
 	if (IS_ERR(rdev))
 		return PTR_ERR(rdev);
 

drivers/regulator/pcf50633-regulator.c

@@ -27,32 +27,22 @@
 #define PCF50633_REGULATOR(_name, _id, _n)			\
 	{							\
 		.name = _name,					\
-		.id = _id,			\
+		.id = PCF50633_REGULATOR_##_id,			\
 		.ops = &pcf50633_regulator_ops,			\
 		.n_voltages = _n,				\
 		.type = REGULATOR_VOLTAGE,			\
 		.owner = THIS_MODULE,				\
+		.vsel_reg = PCF50633_REG_##_id##OUT,		\
+		.vsel_mask = 0xff,				\
+		.enable_reg = PCF50633_REG_##_id##OUT + 1,	\
+		.enable_mask = PCF50633_REGULATOR_ON,		\
 	}
 
-static const u8 pcf50633_regulator_registers[PCF50633_NUM_REGULATORS] = {
-	[PCF50633_REGULATOR_AUTO]	= PCF50633_REG_AUTOOUT,
-	[PCF50633_REGULATOR_DOWN1]	= PCF50633_REG_DOWN1OUT,
-	[PCF50633_REGULATOR_DOWN2]	= PCF50633_REG_DOWN2OUT,
-	[PCF50633_REGULATOR_MEMLDO]	= PCF50633_REG_MEMLDOOUT,
-	[PCF50633_REGULATOR_LDO1]	= PCF50633_REG_LDO1OUT,
-	[PCF50633_REGULATOR_LDO2]	= PCF50633_REG_LDO2OUT,
-	[PCF50633_REGULATOR_LDO3]	= PCF50633_REG_LDO3OUT,
-	[PCF50633_REGULATOR_LDO4]	= PCF50633_REG_LDO4OUT,
-	[PCF50633_REGULATOR_LDO5]	= PCF50633_REG_LDO5OUT,
-	[PCF50633_REGULATOR_LDO6]	= PCF50633_REG_LDO6OUT,
-	[PCF50633_REGULATOR_HCLDO]	= PCF50633_REG_HCLDOOUT,
-};
-
 /* Bits from voltage value */
 static u8 auto_voltage_bits(unsigned int millivolts)
 {
 	if (millivolts < 1800)
-		return 0;
+		return 0x2f;
 	if (millivolts > 3800)
 		return 0xff;
 
@@ -87,6 +77,9 @@ static u8 ldo_voltage_bits(unsigned int millivolts)
 /* Obtain voltage value from bits */
 static unsigned int auto_voltage_value(u8 bits)
 {
+	/* AUTOOUT: 00000000 to 00101110 are reserved.
+	 * Return 0 for bits in reserved range, which means this selector code
+	 * can't be used on this system */
 	if (bits < 0x2f)
 		return 0;
 
@@ -123,7 +116,7 @@ static int pcf50633_regulator_set_voltage(struct regulator_dev *rdev,
 
 	millivolts = min_uV / 1000;
 
-	regnr = pcf50633_regulator_registers[regulator_id];
+	regnr = rdev->desc->vsel_reg;
 
 	switch (regulator_id) {
 	case PCF50633_REGULATOR_AUTO:
@@ -154,20 +147,22 @@ static int pcf50633_regulator_set_voltage(struct regulator_dev *rdev,
 	return pcf50633_reg_write(pcf, regnr, volt_bits);
 }
 
-static int pcf50633_regulator_voltage_value(enum pcf50633_regulator_id id,
-						u8 bits)
+static int pcf50633_regulator_list_voltage(struct regulator_dev *rdev,
+						unsigned int index)
 {
+	int regulator_id = rdev_get_id(rdev);
+
 	int millivolts;
 
-	switch (id) {
+	switch (regulator_id) {
 	case PCF50633_REGULATOR_AUTO:
-		millivolts = auto_voltage_value(bits);
+		millivolts = auto_voltage_value(index);
 		break;
 	case PCF50633_REGULATOR_DOWN1:
-		millivolts = down_voltage_value(bits);
+		millivolts = down_voltage_value(index);
 		break;
 	case PCF50633_REGULATOR_DOWN2:
-		millivolts = down_voltage_value(bits);
+		millivolts = down_voltage_value(index);
 		break;
 	case PCF50633_REGULATOR_LDO1:
 	case PCF50633_REGULATOR_LDO2:
@@ -177,7 +172,7 @@ static int pcf50633_regulator_voltage_value(enum pcf50633_regulator_id id,
 	case PCF50633_REGULATOR_LDO6:
 	case PCF50633_REGULATOR_HCLDO:
 	case PCF50633_REGULATOR_MEMLDO:
-		millivolts = ldo_voltage_value(bits);
+		millivolts = ldo_voltage_value(index);
 		break;
 	default:
 		return -EINVAL;
@@ -186,140 +181,44 @@ static int pcf50633_regulator_voltage_value(enum pcf50633_regulator_id id,
 	return millivolts * 1000;
 }
 
-static int pcf50633_regulator_get_voltage(struct regulator_dev *rdev)
-{
-	struct pcf50633 *pcf;
-	int regulator_id;
-	u8 volt_bits, regnr;
-
-	pcf = rdev_get_drvdata(rdev);
-
-	regulator_id = rdev_get_id(rdev);
-	if (regulator_id >= PCF50633_NUM_REGULATORS)
-		return -EINVAL;
-
-	regnr = pcf50633_regulator_registers[regulator_id];
-
-	volt_bits = pcf50633_reg_read(pcf, regnr);
-
-	return pcf50633_regulator_voltage_value(regulator_id, volt_bits);
-}
-
-static int pcf50633_regulator_list_voltage(struct regulator_dev *rdev,
-						unsigned int index)
-{
-	struct pcf50633 *pcf;
-	int regulator_id;
-
-	pcf = rdev_get_drvdata(rdev);
-
-	regulator_id = rdev_get_id(rdev);
-
-	switch (regulator_id) {
-	case PCF50633_REGULATOR_AUTO:
-		index += 0x2f;
-		break;
-	default:
-		break;
-	}
-
-	return pcf50633_regulator_voltage_value(regulator_id, index);
-}
-
-static int pcf50633_regulator_enable(struct regulator_dev *rdev)
-{
-	struct pcf50633 *pcf = rdev_get_drvdata(rdev);
-	int regulator_id;
-	u8 regnr;
-
-	regulator_id = rdev_get_id(rdev);
-	if (regulator_id >= PCF50633_NUM_REGULATORS)
-		return -EINVAL;
-
-	/* The *ENA register is always one after the *OUT register */
-	regnr = pcf50633_regulator_registers[regulator_id] + 1;
-
-	return pcf50633_reg_set_bit_mask(pcf, regnr, PCF50633_REGULATOR_ON,
-						       PCF50633_REGULATOR_ON);
-}
-
-static int pcf50633_regulator_disable(struct regulator_dev *rdev)
-{
-	struct pcf50633 *pcf = rdev_get_drvdata(rdev);
-	int regulator_id;
-	u8 regnr;
-
-	regulator_id = rdev_get_id(rdev);
-	if (regulator_id >= PCF50633_NUM_REGULATORS)
-		return -EINVAL;
-
-	/* the *ENA register is always one after the *OUT register */
-	regnr = pcf50633_regulator_registers[regulator_id] + 1;
-
-	return pcf50633_reg_set_bit_mask(pcf, regnr,
-					PCF50633_REGULATOR_ON, 0);
-}
-
-static int pcf50633_regulator_is_enabled(struct regulator_dev *rdev)
-{
-	struct pcf50633 *pcf = rdev_get_drvdata(rdev);
-	int regulator_id = rdev_get_id(rdev);
-	u8 regnr;
-
-	regulator_id = rdev_get_id(rdev);
-	if (regulator_id >= PCF50633_NUM_REGULATORS)
-		return -EINVAL;
-
-	/* the *ENA register is always one after the *OUT register */
-	regnr = pcf50633_regulator_registers[regulator_id] + 1;
-
-	return pcf50633_reg_read(pcf, regnr) & PCF50633_REGULATOR_ON;
-}
-
 static struct regulator_ops pcf50633_regulator_ops = {
 	.set_voltage = pcf50633_regulator_set_voltage,
-	.get_voltage = pcf50633_regulator_get_voltage,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.list_voltage = pcf50633_regulator_list_voltage,
-	.enable = pcf50633_regulator_enable,
-	.disable = pcf50633_regulator_disable,
-	.is_enabled = pcf50633_regulator_is_enabled,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
 };
 
-static struct regulator_desc regulators[] = {
-	[PCF50633_REGULATOR_AUTO] =
-		PCF50633_REGULATOR("auto", PCF50633_REGULATOR_AUTO, 81),
-	[PCF50633_REGULATOR_DOWN1] =
-		PCF50633_REGULATOR("down1", PCF50633_REGULATOR_DOWN1, 96),
-	[PCF50633_REGULATOR_DOWN2] =
-		PCF50633_REGULATOR("down2", PCF50633_REGULATOR_DOWN2, 96),
-	[PCF50633_REGULATOR_LDO1] =
-		PCF50633_REGULATOR("ldo1", PCF50633_REGULATOR_LDO1, 28),
-	[PCF50633_REGULATOR_LDO2] =
-		PCF50633_REGULATOR("ldo2", PCF50633_REGULATOR_LDO2, 28),
-	[PCF50633_REGULATOR_LDO3] =
-		PCF50633_REGULATOR("ldo3", PCF50633_REGULATOR_LDO3, 28),
-	[PCF50633_REGULATOR_LDO4] =
-		PCF50633_REGULATOR("ldo4", PCF50633_REGULATOR_LDO4, 28),
-	[PCF50633_REGULATOR_LDO5] =
-		PCF50633_REGULATOR("ldo5", PCF50633_REGULATOR_LDO5, 28),
-	[PCF50633_REGULATOR_LDO6] =
-		PCF50633_REGULATOR("ldo6", PCF50633_REGULATOR_LDO6, 28),
-	[PCF50633_REGULATOR_HCLDO] =
-		PCF50633_REGULATOR("hcldo", PCF50633_REGULATOR_HCLDO, 28),
-	[PCF50633_REGULATOR_MEMLDO] =
-		PCF50633_REGULATOR("memldo", PCF50633_REGULATOR_MEMLDO, 28),
+static const struct regulator_desc regulators[] = {
+	[PCF50633_REGULATOR_AUTO] = PCF50633_REGULATOR("auto", AUTO, 128),
+	[PCF50633_REGULATOR_DOWN1] = PCF50633_REGULATOR("down1", DOWN1, 96),
+	[PCF50633_REGULATOR_DOWN2] = PCF50633_REGULATOR("down2", DOWN2, 96),
+	[PCF50633_REGULATOR_LDO1] = PCF50633_REGULATOR("ldo1", LDO1, 28),
+	[PCF50633_REGULATOR_LDO2] = PCF50633_REGULATOR("ldo2", LDO2, 28),
+	[PCF50633_REGULATOR_LDO3] = PCF50633_REGULATOR("ldo3", LDO3, 28),
+	[PCF50633_REGULATOR_LDO4] = PCF50633_REGULATOR("ldo4", LDO4, 28),
+	[PCF50633_REGULATOR_LDO5] = PCF50633_REGULATOR("ldo5", LDO5, 28),
+	[PCF50633_REGULATOR_LDO6] = PCF50633_REGULATOR("ldo6", LDO6, 28),
+	[PCF50633_REGULATOR_HCLDO] = PCF50633_REGULATOR("hcldo", HCLDO, 28),
+	[PCF50633_REGULATOR_MEMLDO] = PCF50633_REGULATOR("memldo", MEMLDO, 28),
 };
 
 static int __devinit pcf50633_regulator_probe(struct platform_device *pdev)
 {
 	struct regulator_dev *rdev;
 	struct pcf50633 *pcf;
+	struct regulator_config config = { };
 
 	/* Already set by core driver */
 	pcf = dev_to_pcf50633(pdev->dev.parent);
 
-	rdev = regulator_register(&regulators[pdev->id], &pdev->dev,
-				  pdev->dev.platform_data, pcf, NULL);
+	config.dev = &pdev->dev;
+	config.init_data = pdev->dev.platform_data;
+	config.driver_data = pcf;
+	config.regmap = pcf->regmap;
+
+	rdev = regulator_register(&regulators[pdev->id], &config);
 	if (IS_ERR(rdev))
 		return PTR_ERR(rdev);
 

drivers/regulator/rc5t583-regulator.c

+/*
+ * Regulator driver for RICOH RC5T583 power management chip.
+ *
+ * Copyright (c) 2011-2012, NVIDIA CORPORATION.  All rights reserved.
+ * Author: Laxman dewangan <ldewangan@nvidia.com>
+ *
+ * based on code
+ *      Copyright (C) 2011 RICOH COMPANY,LTD
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/gpio.h>
+#include <linux/mfd/rc5t583.h>
+
+struct rc5t583_regulator_info {
+	int			deepsleep_id;
+
+	/* Regulator register address.*/
+	uint8_t			reg_disc_reg;
+	uint8_t			disc_bit;
+	uint8_t			deepsleep_reg;
+
+	/* Chip constraints on regulator behavior */
+	int			min_uV;
+	int			max_uV;
+	int			step_uV;
+
+	/* Regulator specific turn-on delay  and voltage settling time*/
+	int			enable_uv_per_us;
+	int			change_uv_per_us;
+
+	/* Used by regulator core */
+	struct regulator_desc	desc;
+};
+
+struct rc5t583_regulator {
+	struct rc5t583_regulator_info *reg_info;
+
+	/* Devices */
+	struct device		*dev;
+	struct rc5t583		*mfd;
+	struct regulator_dev	*rdev;
+};
+
+static int rc5t583_list_voltage(struct regulator_dev *rdev, unsigned selector)
+{
+	struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
+	struct rc5t583_regulator_info *ri = reg->reg_info;
+	return ri->min_uV + (ri->step_uV * selector);
+}
+
+static int rc5t583_set_voltage(struct regulator_dev *rdev,
+			       int min_uV, int max_uV, unsigned *selector)
+{
+	struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
+	struct rc5t583_regulator_info *ri = reg->reg_info;
+	int sel, ret;
+
+	if (min_uV < ri->min_uV)
+		min_uV = ri->min_uV;
+
+	sel = DIV_ROUND_UP(min_uV - ri->min_uV, ri->step_uV);
+
+	if (sel >= rdev->desc->n_voltages) {
+		dev_err(&rdev->dev, "Invalid selector 0x%02x\n", sel);
+		return -EINVAL;
+	}
+
+	*selector = sel;
+
+	ret = rc5t583_update(reg->mfd->dev, rdev->desc->vsel_reg, sel,
+			     rdev->desc->vsel_mask);
+	if (ret < 0)
+		dev_err(&rdev->dev, "Error in update voltage register 0x%02x\n",
+			rdev->desc->vsel_reg);
+	return ret;
+}
+
+static int rc5t583_regulator_enable_time(struct regulator_dev *rdev)
+{
+	struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
+	int vsel = regulator_get_voltage_sel_regmap(rdev);
+	int curr_uV = rc5t583_list_voltage(rdev, vsel);
+
+	return DIV_ROUND_UP(curr_uV, reg->reg_info->enable_uv_per_us);
+}
+
+static int rc5t583_set_voltage_time_sel(struct regulator_dev *rdev,
+		unsigned int old_selector, unsigned int new_selector)
+{
+	struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
+	int old_uV, new_uV;
+	old_uV = rc5t583_list_voltage(rdev, old_selector);
+
+	if (old_uV < 0)
+		return old_uV;
+
+	new_uV = rc5t583_list_voltage(rdev, new_selector);
+	if (new_uV < 0)
+		return new_uV;
+
+	return DIV_ROUND_UP(abs(old_uV - new_uV),
+				reg->reg_info->change_uv_per_us);
+}
+
+
+static struct regulator_ops rc5t583_ops = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.enable_time		= rc5t583_regulator_enable_time,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage		= rc5t583_set_voltage,
+	.list_voltage		= rc5t583_list_voltage,
+	.set_voltage_time_sel	= rc5t583_set_voltage_time_sel,
+};
+
+#define RC5T583_REG(_id, _en_reg, _en_bit, _disc_reg, _disc_bit, \
+		_vout_mask, _min_mv, _max_mv, _step_uV, _enable_mv) \
+{								\
+	.reg_disc_reg	= RC5T583_REG_##_disc_reg,		\
+	.disc_bit	= _disc_bit,				\
+	.deepsleep_reg	= RC5T583_REG_##_id##DAC_DS,		\
+	.min_uV		= _min_mv * 1000,			\
+	.max_uV		= _max_mv * 1000,			\
+	.step_uV	= _step_uV,				\
+	.enable_uv_per_us = _enable_mv * 1000,			\
+	.change_uv_per_us = 40 * 1000,				\
+	.deepsleep_id	= RC5T583_DS_##_id,			\
+	.desc = {						\
+		.name = "rc5t583-regulator-"#_id,		\
+		.id = RC5T583_REGULATOR_##_id,			\
+		.n_voltages = (_max_mv - _min_mv) * 1000 / _step_uV + 1, \
+		.ops = &rc5t583_ops,				\
+		.type = REGULATOR_VOLTAGE,			\
+		.owner = THIS_MODULE,				\
+		.vsel_reg = RC5T583_REG_##_id##DAC,		\
+		.vsel_mask = _vout_mask,			\
+		.enable_reg = RC5T583_REG_##_en_reg,		\
+		.enable_mask = BIT(_en_bit),			\
+	},							\
+}
+
+static struct rc5t583_regulator_info rc5t583_reg_info[RC5T583_REGULATOR_MAX] = {
+	RC5T583_REG(DC0, DC0CTL, 0, DC0CTL, 1, 0x7F, 700, 1500, 12500, 4),
+	RC5T583_REG(DC1, DC1CTL, 0, DC1CTL, 1, 0x7F, 700, 1500, 12500, 14),
+	RC5T583_REG(DC2, DC2CTL, 0, DC2CTL, 1, 0x7F, 900, 2400, 12500, 14),
+	RC5T583_REG(DC3, DC3CTL, 0, DC3CTL, 1, 0x7F, 900, 2400, 12500, 14),
+	RC5T583_REG(LDO0, LDOEN2, 0, LDODIS2, 0, 0x7F, 900, 3400, 25000, 160),
+	RC5T583_REG(LDO1, LDOEN2, 1, LDODIS2, 1, 0x7F, 900, 3400, 25000, 160),
+	RC5T583_REG(LDO2, LDOEN2, 2, LDODIS2, 2, 0x7F, 900, 3400, 25000, 160),
+	RC5T583_REG(LDO3, LDOEN2, 3, LDODIS2, 3, 0x7F, 900, 3400, 25000, 160),
+	RC5T583_REG(LDO4, LDOEN2, 4, LDODIS2, 4, 0x3F, 750, 1500, 12500, 133),
+	RC5T583_REG(LDO5, LDOEN2, 5, LDODIS2, 5, 0x7F, 900, 3400, 25000, 267),
+	RC5T583_REG(LDO6, LDOEN2, 6, LDODIS2, 6, 0x7F, 900, 3400, 25000, 133),
+	RC5T583_REG(LDO7, LDOEN2, 7, LDODIS2, 7, 0x7F, 900, 3400, 25000, 233),
+	RC5T583_REG(LDO8, LDOEN1, 0, LDODIS1, 0, 0x7F, 900, 3400, 25000, 233),
+	RC5T583_REG(LDO9, LDOEN1, 1, LDODIS1, 1, 0x7F, 900, 3400, 25000, 133),
+};
+
+static int __devinit rc5t583_regulator_probe(struct platform_device *pdev)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(pdev->dev.parent);
+	struct rc5t583_platform_data *pdata = dev_get_platdata(rc5t583->dev);
+	struct regulator_init_data *reg_data;
+	struct regulator_config config = { };
+	struct rc5t583_regulator *reg = NULL;
+	struct rc5t583_regulator *regs;
+	struct regulator_dev *rdev;
+	struct rc5t583_regulator_info *ri;
+	int ret;
+	int id;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform data, exiting...\n");
+		return -ENODEV;
+	}
+
+	regs = devm_kzalloc(&pdev->dev, RC5T583_REGULATOR_MAX *
+			sizeof(struct rc5t583_regulator), GFP_KERNEL);
+	if (!regs) {
+		dev_err(&pdev->dev, "Memory allocation failed exiting..\n");
+		return -ENOMEM;
+	}
+
+
+	for (id = 0; id < RC5T583_REGULATOR_MAX; ++id) {
+		reg_data = pdata->reg_init_data[id];
+
+		/* No need to register if there is no regulator data */
+		if (!reg_data)
+			continue;
+
+		reg = &regs[id];
+		ri = &rc5t583_reg_info[id];
+		reg->reg_info = ri;
+		reg->mfd = rc5t583;
+		reg->dev = &pdev->dev;
+
+		if (ri->deepsleep_id == RC5T583_DS_NONE)
+			goto skip_ext_pwr_config;
+
+		ret = rc5t583_ext_power_req_config(rc5t583->dev,
+				ri->deepsleep_id,
+				pdata->regulator_ext_pwr_control[id],
+				pdata->regulator_deepsleep_slot[id]);
+		/*
+		 * Configuring external control is not a major issue,
+		 * just give warning.
+		 */
+		if (ret < 0)
+			dev_warn(&pdev->dev,
+				"Failed to configure ext control %d\n", id);
+
+skip_ext_pwr_config:
+		config.dev = &pdev->dev;
+		config.init_data = reg_data;
+		config.driver_data = reg;
+		config.regmap = rc5t583->regmap;
+
+		rdev = regulator_register(&ri->desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "Failed to register regulator %s\n",
+						ri->desc.name);
+			ret = PTR_ERR(rdev);
+			goto clean_exit;
+		}
+		reg->rdev = rdev;
+	}
+	platform_set_drvdata(pdev, regs);
+	return 0;
+
+clean_exit:
+	while (--id >= 0)
+		regulator_unregister(regs[id].rdev);
+
+	return ret;
+}
+
+static int __devexit rc5t583_regulator_remove(struct platform_device *pdev)
+{
+	struct rc5t583_regulator *regs = platform_get_drvdata(pdev);
+	int id;
+
+	for (id = 0; id < RC5T583_REGULATOR_MAX; ++id)
+		regulator_unregister(regs[id].rdev);
+	return 0;
+}
+
+static struct platform_driver rc5t583_regulator_driver = {
+	.driver	= {
+		.name	= "rc5t583-regulator",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= rc5t583_regulator_probe,
+	.remove		= __devexit_p(rc5t583_regulator_remove),
+};
+
+static int __init rc5t583_regulator_init(void)
+{
+	return platform_driver_register(&rc5t583_regulator_driver);
+}
+subsys_initcall(rc5t583_regulator_init);
+
+static void __exit rc5t583_regulator_exit(void)
+{
+	platform_driver_unregister(&rc5t583_regulator_driver);
+}
+module_exit(rc5t583_regulator_exit);
+
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_DESCRIPTION("RC5T583 regulator driver");
+MODULE_ALIAS("platform:rc5t583-regulator");
+MODULE_LICENSE("GPL v2");

drivers/regulator/tps6105x-regulator.c

@@ -123,7 +123,7 @@ static struct regulator_ops tps6105x_regulator_ops = {
 	.list_voltage	= tps6105x_regulator_list_voltage,
 };
 
-static struct regulator_desc tps6105x_regulator_desc = {
+static const struct regulator_desc tps6105x_regulator_desc = {
 	.name		= "tps6105x-boost",
 	.ops		= &tps6105x_regulator_ops,
 	.type		= REGULATOR_VOLTAGE,
@@ -139,6 +139,7 @@ static int __devinit tps6105x_regulator_probe(struct platform_device *pdev)
 {
 	struct tps6105x *tps6105x = dev_get_platdata(&pdev->dev);
 	struct tps6105x_platform_data *pdata = tps6105x->pdata;
+	struct regulator_config config = { };
 	int ret;
 
 	/* This instance is not set for regulator mode so bail out */
@@ -148,11 +149,13 @@ static int __devinit tps6105x_regulator_probe(struct platform_device *pdev)
 		return 0;
 	}
 
+	config.dev = &tps6105x->client->dev;
+	config.init_data = pdata->regulator_data;
+	config.driver_data = tps6105x;
+
 	/* Register regulator with framework */
 	tps6105x->regulator = regulator_register(&tps6105x_regulator_desc,
-					     &tps6105x->client->dev,
-					     pdata->regulator_data, tps6105x,
-					     NULL);
+						 &config);
 	if (IS_ERR(tps6105x->regulator)) {
 		ret = PTR_ERR(tps6105x->regulator);
 		dev_err(&tps6105x->client->dev,

drivers/regulator/tps62360-regulator.c

 /*
  * tps62360.c -- TI tps62360
  *
- * Driver for processor core supply tps62360 and tps62361B
+ * Driver for processor core supply tps62360, tps62361B, tps62362 and tps62363.
  *
  * Copyright (c) 2012, NVIDIA Corporation.
  *
@@ -46,7 +46,7 @@
 #define REG_RAMPCTRL		6
 #define REG_CHIPID		8
 
-enum chips {TPS62360, TPS62361};
+enum chips {TPS62360, TPS62361, TPS62362, TPS62363};
 
 #define TPS62360_BASE_VOLTAGE	770
 #define TPS62360_N_VOLTAGES	64
@@ -56,10 +56,8 @@ enum chips {TPS62360, TPS62361};
 
 /* tps 62360 chip information */
 struct tps62360_chip {
-	const char *name;
 	struct device *dev;
 	struct regulator_desc desc;
-	struct i2c_client *client;
 	struct regulator_dev *rdev;
 	struct regmap *regmap;
 	int chip_id;
@@ -272,6 +270,7 @@ static const struct regmap_config tps62360_regmap_config = {
 static int __devinit tps62360_probe(struct i2c_client *client,
 				     const struct i2c_device_id *id)
 {
+	struct regulator_config config = { };
 	struct tps62360_regulator_platform_data *pdata;
 	struct regulator_dev *rdev;
 	struct tps62360_chip *tps;
@@ -297,21 +296,31 @@ static int __devinit tps62360_probe(struct i2c_client *client,
 	tps->en_internal_pulldn = pdata->en_internal_pulldn;
 	tps->vsel0_gpio = pdata->vsel0_gpio;
 	tps->vsel1_gpio = pdata->vsel1_gpio;
-	tps->client = client;
 	tps->dev = &client->dev;
-	tps->name = id->name;
-	tps->voltage_base = (id->driver_data == TPS62360) ?
-				TPS62360_BASE_VOLTAGE : TPS62361_BASE_VOLTAGE;
-	tps->voltage_reg_mask = (id->driver_data == TPS62360) ? 0x3F : 0x7F;
+
+	switch (id->driver_data) {
+	case TPS62360:
+	case TPS62362:
+		tps->voltage_base = TPS62360_BASE_VOLTAGE;
+		tps->voltage_reg_mask = 0x3F;
+		tps->desc.n_voltages = TPS62360_N_VOLTAGES;
+		break;
+	case TPS62361:
+	case TPS62363:
+		tps->voltage_base = TPS62361_BASE_VOLTAGE;
+		tps->voltage_reg_mask = 0x7F;
+		tps->desc.n_voltages = TPS62361_N_VOLTAGES;
+		break;
+	default:
+		return -ENODEV;
+	}
 
 	tps->desc.name = id->name;
 	tps->desc.id = 0;
-	tps->desc.n_voltages = (id->driver_data == TPS62360) ?
-				TPS62360_N_VOLTAGES : TPS62361_N_VOLTAGES;
 	tps->desc.ops = &tps62360_dcdc_ops;
 	tps->desc.type = REGULATOR_VOLTAGE;
 	tps->desc.owner = THIS_MODULE;
-	tps->regmap = regmap_init_i2c(client, &tps62360_regmap_config);
+	tps->regmap = devm_regmap_init_i2c(client, &tps62360_regmap_config);
 	if (IS_ERR(tps->regmap)) {
 		ret = PTR_ERR(tps->regmap);
 		dev_err(&client->dev, "%s() Err: Failed to allocate register"
@@ -376,9 +385,12 @@ static int __devinit tps62360_probe(struct i2c_client *client,
 		goto err_init;
 	}
 
+	config.dev = &client->dev;
+	config.init_data = &pdata->reg_init_data;
+	config.driver_data = tps;
+
 	/* Register the regulators */
-	rdev = regulator_register(&tps->desc, &client->dev,
-				&pdata->reg_init_data, tps, NULL);
+	rdev = regulator_register(&tps->desc, &config);
 	if (IS_ERR(rdev)) {
 		dev_err(tps->dev, "%s() Err: Failed to register %s\n",
 				__func__, id->name);
@@ -396,7 +408,6 @@ static int __devinit tps62360_probe(struct i2c_client *client,
 	if (gpio_is_valid(tps->vsel0_gpio))
 		gpio_free(tps->vsel0_gpio);
 err_gpio0:
-	regmap_exit(tps->regmap);
 	return ret;
 }
 
@@ -417,7 +428,6 @@ static int __devexit tps62360_remove(struct i2c_client *client)
 		gpio_free(tps->vsel0_gpio);
 
 	regulator_unregister(tps->rdev);
-	regmap_exit(tps->regmap);
 	return 0;
 }
 
@@ -439,6 +449,8 @@ static void tps62360_shutdown(struct i2c_client *client)
 static const struct i2c_device_id tps62360_id[] = {
 	{.name = "tps62360", .driver_data = TPS62360},
 	{.name = "tps62361", .driver_data = TPS62361},
+	{.name = "tps62362", .driver_data = TPS62362},
+	{.name = "tps62363", .driver_data = TPS62363},
 	{},
 };
 
@@ -468,5 +480,5 @@ static void __exit tps62360_cleanup(void)
 module_exit(tps62360_cleanup);
 
 MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
-MODULE_DESCRIPTION("TPS62360 voltage regulator driver");
+MODULE_DESCRIPTION("TPS6236x voltage regulator driver");
 MODULE_LICENSE("GPL v2");

drivers/regulator/tps6507x-regulator.c

@@ -404,6 +404,7 @@ static __devinit int tps6507x_pmic_probe(struct platform_device *pdev)
 {
 	struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent);
 	struct tps_info *info = &tps6507x_pmic_regs[0];
+	struct regulator_config config = { };
 	struct regulator_init_data *init_data;
 	struct regulator_dev *rdev;
 	struct tps6507x_pmic *tps;
@@ -428,7 +429,7 @@ static __devinit int tps6507x_pmic_probe(struct platform_device *pdev)
 	if (!init_data)
 		return -EINVAL;
 
-	tps = kzalloc(sizeof(*tps), GFP_KERNEL);
+	tps = devm_kzalloc(&pdev->dev, sizeof(*tps), GFP_KERNEL);
 	if (!tps)
 		return -ENOMEM;
 
@@ -453,8 +454,11 @@ static __devinit int tps6507x_pmic_probe(struct platform_device *pdev)
 		tps->desc[i].type = REGULATOR_VOLTAGE;
 		tps->desc[i].owner = THIS_MODULE;
 
-		rdev = regulator_register(&tps->desc[i],
-					tps6507x_dev->dev, init_data, tps, NULL);
+		config.dev = tps6507x_dev->dev;
+		config.init_data = init_data;
+		config.driver_data = tps;
+
+		rdev = regulator_register(&tps->desc[i], &config);
 		if (IS_ERR(rdev)) {
 			dev_err(tps6507x_dev->dev,
 				"failed to register %s regulator\n",
@@ -475,8 +479,6 @@ static __devinit int tps6507x_pmic_probe(struct platform_device *pdev)
 fail:
 	while (--i >= 0)
 		regulator_unregister(tps->rdev[i]);
-
-	kfree(tps);
 	return error;
 }
 
@@ -488,9 +490,6 @@ static int __devexit tps6507x_pmic_remove(struct platform_device *pdev)
 
 	for (i = 0; i < TPS6507X_NUM_REGULATOR; i++)
 		regulator_unregister(tps->rdev[i]);
-
-	kfree(tps);
-
 	return 0;
 }
 

drivers/regulator/wm8400-regulator.c

@@ -323,11 +323,14 @@ static struct regulator_desc regulators[] = {
 static int __devinit wm8400_regulator_probe(struct platform_device *pdev)
 {
 	struct wm8400 *wm8400 = container_of(pdev, struct wm8400, regulators[pdev->id]);
+	struct regulator_config config = { };
 	struct regulator_dev *rdev;
 
-	rdev = regulator_register(&regulators[pdev->id], &pdev->dev,
-				  pdev->dev.platform_data, wm8400, NULL);
+	config.dev = &pdev->dev;
+	config.init_data = pdev->dev.platform_data;
+	config.driver_data = wm8400;
 
+	rdev = regulator_register(&regulators[pdev->id], &config);
 	if (IS_ERR(rdev))
 		return PTR_ERR(rdev);