Skip to content

L
linux
Commit 17b581c6 authored by Martin Dalecki's avatar Martin Dalecki Committed by Linus Torvalds
Browse files
Options

[PATCH] 2.5.8-pre3 IDE 31 

- Integrate the TCQ stuff from Jens Axboe. Deal with the conflicts, apply some
   cosmetic changes. We are still not at a stage where we could immediately
   integrate ata_request and ata_taskfile but we are no longer far away.

- Clean up the data transfer function in ide-disk to use ata_request structures
   directly.

- Kill useless leading version information in ide-disk.c

- Replace the ATA_AR_INIT macro with inline ata_ar_init() function.

- Replace IDE_CLEAR_TAG with ata_clear_tag().

- Replace IDE_SET_TAG with ata_set_tag().

- Kill georgeous ide_dmafunc_verbose().

- Fix typo in ide_enable_queued() (ide-tcq.c!)

Apparently there still problems with a TCQ enabled device and a not enabled
device on the same channel, but let's first synchronize up with Jens.
parent a87cd868
Hide whitespace changes
Inline Side-by-side
Showing with 1505 additions and 379 deletions
drivers/ide/Config.help
View file @ 17b581c6
......@@ -744,6 +744,28 @@ CONFIG_IDEDMA_ONLYDISK
Generally say N here.
CONFIG_BLK_DEV_IDE_TCQ
Support for tagged command queueing on ATA disk drives. This enables
the IDE layer to have multiple in-flight requests on hardware that
supports it. For now this includes the IBM Deskstar series drives,
such as the GXP75, 40GV, GXP60, and GXP120 (ie any Deskstar made in
the last couple of years).
If you have such a drive, say Y here.
CONFIG_BLK_DEV_IDE_TCQ_DEFAULT
Enabled tagged command queueing unconditionally on drives that report
support for it.
Generally say Y here.
CONFIG_BLK_DEV_IDE_TCQ_DEPTH
Maximum size of commands to enable per-drive. Any value between 1
and 32 is valid, with 32 being the maxium that the hardware supports.
You probably just want the default of 32 here. If you enter an invalid
number, the default value will be used.
CONFIG_BLK_DEV_IT8172
Say Y here to support the on-board IDE controller on the Integrated
Technology Express, Inc. ITE8172 SBC. Vendor page at
......
drivers/ide/Config.in
View file @ 17b581c6
......@@ -47,6 +47,11 @@ if [ "$CONFIG_BLK_DEV_IDE" != "n" ]; then
dep_bool ' Use PCI DMA by default when available' CONFIG_IDEDMA_PCI_AUTO $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' Enable DMA only for disks ' CONFIG_IDEDMA_ONLYDISK $CONFIG_IDEDMA_PCI_AUTO
define_bool CONFIG_BLK_DEV_IDEDMA $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' ATA tagged command queueing' CONFIG_BLK_DEV_IDE_TCQ $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' TCQ on by default' CONFIG_BLK_DEV_IDE_TCQ_DEFAULT $CONFIG_BLK_DEV_IDE_TCQ
if [ $CONFIG_BLK_DEV_IDE_TCQ_DEFAULT != "n" ]; then
int ' Default queue depth' CONFIG_BLK_DEV_IDE_TCQ_DEPTH 32
fi
dep_bool ' ATA Work(s) In Progress (EXPERIMENTAL)' CONFIG_IDEDMA_PCI_WIP $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_EXPERIMENTAL
dep_bool ' Good-Bad DMA Model-Firmware (WIP)' CONFIG_IDEDMA_NEW_DRIVE_LISTINGS $CONFIG_IDEDMA_PCI_WIP
dep_bool ' AEC62XX chipset support' CONFIG_BLK_DEV_AEC62XX $CONFIG_BLK_DEV_IDEDMA_PCI
......
drivers/ide/Makefile
View file @ 17b581c6
......@@ -45,6 +45,7 @@ ide-obj-$(CONFIG_BLK_DEV_HPT366) += hpt366.o
ide-obj-$(CONFIG_BLK_DEV_HT6560B) += ht6560b.o
ide-obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o
ide-obj-$(CONFIG_BLK_DEV_IDEDMA_PCI) += ide-dma.o
ide-obj-$(CONFIG_BLK_DEV_IDE_TCQ) += ide-tcq.o
ide-obj-$(CONFIG_BLK_DEV_IDEPCI) += ide-pci.o
ide-obj-$(CONFIG_BLK_DEV_ISAPNP) += ide-pnp.o
ide-obj-$(CONFIG_BLK_DEV_IDE_PMAC) += ide-pmac.o
......
drivers/ide/hpt366.c
View file @ 17b581c6
......@@ -75,8 +75,6 @@
#include <linux/proc_fs.h>
#endif /* defined(DISPLAY_HPT366_TIMINGS) && defined(CONFIG_PROC_FS) */
extern char *ide_dmafunc_verbose(ide_dma_action_t dmafunc);
const char *quirk_drives[] = {
"QUANTUM FIREBALLlct08 08",
"QUANTUM FIREBALLP KA6.4",
......@@ -815,10 +813,8 @@ int hpt366_dmaproc (ide_dma_action_t func, ide_drive_t *drive)
pci_read_config_byte(drive->channel->pci_dev, 0x50, &reg50h);
pci_read_config_byte(drive->channel->pci_dev, 0x52, &reg52h);
pci_read_config_byte(drive->channel->pci_dev, 0x5a, &reg5ah);
printk("%s: (%s) reg50h=0x%02x, reg52h=0x%02x, reg5ah=0x%02x\n",
drive->name,
ide_dmafunc_verbose(func),
reg50h, reg52h, reg5ah);
printk("%s: (ide_dma_lostirq) reg50h=0x%02x, reg52h=0x%02x, reg5ah=0x%02x\n",
drive->name, reg50h, reg52h, reg5ah);
if (reg5ah & 0x10)
pci_write_config_byte(drive->channel->pci_dev, 0x5a, reg5ah & ~0x10);
/* fall through to a reset */
......
drivers/ide/icside.c
View file @ 17b581c6
......@@ -27,7 +27,6 @@
#include <asm/io.h>
extern char *ide_xfer_verbose (byte xfer_rate);
extern char *ide_dmafunc_verbose(ide_dma_action_t dmafunc);
/*
* Maximum number of interfaces per card
......@@ -467,8 +466,7 @@ icside_dmaproc(ide_dma_action_t func, ide_drive_t *drive)
case ide_dma_timeout:
default:
printk("icside_dmaproc: unsupported %s func: %d\n",
ide_dmafunc_verbose(func), func);
printk("icside_dmaproc: unsupported function: %d\n", func);
}
return 1;
}
......
drivers/ide/ide-disk.c
View file @ 17b581c6
/*
* Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
* Copyright (C) 1994-1998 Linus Torvalds and authors:
*
* Mostly written by Mark Lord <mlord@pobox.com>
* and Gadi Oxman <gadio@netvision.net.il>
* and Andre Hedrick <andre@linux-ide.org>
* Mark Lord <mlord@pobox.com>
* Gadi Oxman <gadio@netvision.net.il>
* Andre Hedrick <andre@linux-ide.org>
* Jens Axboe <axboe@suse.de>
* Marcin Dalecki <dalecki@evision.ag>
*
* This is the IDE/ATA disk driver, as evolved from hd.c and ide.c.
*
* Version 1.00 move disk only code from ide.c to ide-disk.c
* support optional byte-swapping of all data
* Version 1.01 fix previous byte-swapping code
* Version 1.02 remove ", LBA" from drive identification msgs
* Version 1.03 fix display of id->buf_size for big-endian
* Version 1.04 add /proc configurable settings and S.M.A.R.T support
* Version 1.05 add capacity support for ATA3 >= 8GB
* Version 1.06 get boot-up messages to show full cyl count
* Version 1.07 disable door-locking if it fails
* Version 1.08 fixed CHS/LBA translations for ATA4 > 8GB,
* process of adding new ATA4 compliance.
* fixed problems in allowing fdisk to see
* the entire disk.
* Version 1.09 added increment of rq->sector in ide_multwrite
* added UDMA 3/4 reporting
* Version 1.10 request queue changes, Ultra DMA 100
* Version 1.11 Highmem I/O support, Jens Axboe <axboe@suse.de>
* Version 1.12 added 48-bit lba
* Version 1.13 adding taskfile io access method
* This is the ATA disk device driver, as evolved from hd.c and ide.c.
*/
#define IDEDISK_VERSION "1.13"
#define IDEDISK_VERSION "1.14"
#include <linux/config.h>
#include <linux/module.h>
......@@ -57,7 +39,7 @@
#endif
/*
* lba_capacity_is_ok() performs a sanity check on the claimed "lba_capacity"
* Perform a sanity check on the claimed "lba_capacity"
* value for this drive (from its reported identification information).
*
* Returns: 1 if lba_capacity looks sensible
......@@ -65,7 +47,7 @@
*
* It is called only once for each drive.
*/
static int lba_capacity_is_ok (struct hd_driveid *id)
static int lba_capacity_is_ok(struct hd_driveid *id)
{
unsigned long lba_sects, chs_sects, head, tail;
......@@ -106,135 +88,163 @@ static int lba_capacity_is_ok (struct hd_driveid *id)
return 0; /* lba_capacity value may be bad */
}
/*
* Determine the apriopriate hardware command correspnding to the action in
* question, depending upon the device capabilities and setup.
*/
static u8 get_command(ide_drive_t *drive, int cmd)
{
int lba48bit = (drive->id->cfs_enable_2 & 0x0400) ? 1 : 0;
/* Well, calculating the command in this variable may be an
* overoptimization. */
u8 command = WIN_NOP;
#if 1
lba48bit = drive->addressing;
#endif
/*
* 48-bit commands are pretty sanely laid out
*/
if (lba48bit) {
if (cmd == READ) {
if (drive->using_dma)
return WIN_READDMA_EXT;
else if (drive->mult_count)
return WIN_MULTREAD_EXT;
else
return WIN_READ_EXT;
} else if (cmd == WRITE) {
if (drive->using_dma)
return WIN_WRITEDMA_EXT;
else if (drive->mult_count)
return WIN_MULTWRITE_EXT;
else
return WIN_WRITE_EXT;
}
if (cmd == READ)
command = WIN_READ_EXT;
else
command = WIN_WRITE_EXT;
if (drive->using_dma) {
command++; /* WIN_*DMA_EXT */
if (drive->using_tcq)
command++; /* WIN_*DMA_QUEUED_EXT */
} else if (drive->mult_count)
command += 5; /* WIN_MULT*_EXT */
} else {
/*
* 28-bit commands seem not to be, though...
*/
if (cmd == READ) {
if (drive->using_dma)
return WIN_READDMA;
else if (drive->mult_count)
return WIN_MULTREAD;
if (drive->using_dma) {
if (drive->using_tcq)
command = WIN_READDMA_QUEUED;
else
command = WIN_READDMA;
} else if (drive->mult_count)
command = WIN_MULTREAD;
else
return WIN_READ;
} else if (cmd == WRITE) {
if (drive->using_dma)
return WIN_WRITEDMA;
else if (drive->mult_count)
return WIN_MULTWRITE;
command = WIN_READ;
} else {
if (drive->using_dma) {
if (drive->using_tcq)
command = WIN_WRITEDMA_QUEUED;
else
command = WIN_WRITEDMA;
} else if (drive->mult_count)
command = WIN_MULTWRITE;
else
return WIN_WRITE;
command = WIN_WRITE;
}
}
return WIN_NOP;
return command;
}
static ide_startstop_t chs_do_request(ide_drive_t *drive, struct request *rq, unsigned long block)
static ide_startstop_t chs_do_request(ide_drive_t *drive, struct ata_request *ar, sector_t block)
{
struct hd_drive_task_hdr taskfile;
struct hd_drive_hob_hdr hobfile;
struct ata_taskfile args;
int sectors;
struct ata_taskfile *args = &ar->ar_task;
struct request *rq = ar->ar_rq;
int sectors = rq->nr_sectors;
unsigned int track = (block / drive->sect);
unsigned int sect = (block % drive->sect) + 1;
unsigned int head = (track % drive->head);
unsigned int cyl = (track / drive->head);
unsigned int track = (block / drive->sect);
unsigned int sect = (block % drive->sect) + 1;
unsigned int head = (track % drive->head);
unsigned int cyl = (track / drive->head);
memset(&taskfile, 0, sizeof(struct hd_drive_task_hdr));
memset(&hobfile, 0, sizeof(struct hd_drive_hob_hdr));
memset(&args->taskfile, 0, sizeof(struct hd_drive_task_hdr));
memset(&args->hobfile, 0, sizeof(struct hd_drive_hob_hdr));
sectors = rq->nr_sectors;
if (sectors == 256)
sectors = 0;
taskfile.sector_count = sectors;
if (ar->ar_flags & ATA_AR_QUEUED) {
unsigned long flags;
args->taskfile.feature = sectors;
args->taskfile.sector_count = ar->ar_tag << 3;
taskfile.sector_number = sect;
taskfile.low_cylinder = cyl;
taskfile.high_cylinder = (cyl>>8);
spin_lock_irqsave(DRIVE_LOCK(drive), flags);
blkdev_dequeue_request(rq);
spin_unlock_irqrestore(DRIVE_LOCK(drive), flags);
} else
args->taskfile.sector_count = sectors;
taskfile.device_head = head;
taskfile.device_head |= drive->select.all;
taskfile.command = get_command(drive, rq_data_dir(rq));
args->taskfile.sector_number = sect;
args->taskfile.low_cylinder = cyl;
args->taskfile.high_cylinder = (cyl>>8);
args->taskfile.device_head = head;
args->taskfile.device_head |= drive->select.all;
args->taskfile.command = get_command(drive, rq_data_dir(rq));
#ifdef DEBUG
printk("%s: %sing: ", drive->name,
(rq_data_dir(rq)==READ) ? "read" : "writ");
if (lba) printk("LBAsect=%lld, ", block);
else printk("CHS=%d/%d/%d, ", cyl, head, sect);
printk("sectors=%ld, ", rq->nr_sectors);
printk("CHS=%d/%d/%d, ", cyl, head, sect);
printk("buffer=0x%08lx\n", (unsigned long) rq->buffer);
#endif
args.taskfile = taskfile;
args.hobfile = hobfile;
ide_cmd_type_parser(&args);
rq->special = &args;
ide_cmd_type_parser(args);
args->ar = ar;
rq->special = ar;
return ata_taskfile(drive, &args, rq);
return ata_taskfile(drive, args, rq);
}
static ide_startstop_t lba28_do_request(ide_drive_t *drive, struct request *rq, unsigned long block)
static ide_startstop_t lba28_do_request(ide_drive_t *drive, struct ata_request *ar, sector_t block)
{
struct hd_drive_task_hdr taskfile;
struct hd_drive_hob_hdr hobfile;
struct ata_taskfile args;
int sectors;
struct ata_taskfile *args = &ar->ar_task;
struct request *rq = ar->ar_rq;
int sectors = rq->nr_sectors;
sectors = rq->nr_sectors;
if (sectors == 256)
sectors = 0;
memset(&taskfile, 0, sizeof(struct hd_drive_task_hdr));
memset(&hobfile, 0, sizeof(struct hd_drive_hob_hdr));
memset(&args->taskfile, 0, sizeof(struct hd_drive_task_hdr));
memset(&args->hobfile, 0, sizeof(struct hd_drive_hob_hdr));
if (ar->ar_flags & ATA_AR_QUEUED) {
unsigned long flags;
taskfile.sector_count = sectors;
taskfile.sector_number = block;
taskfile.low_cylinder = (block >>= 8);
args->taskfile.feature = sectors;
args->taskfile.sector_count = ar->ar_tag << 3;
taskfile.high_cylinder = (block >>= 8);
spin_lock_irqsave(DRIVE_LOCK(drive), flags);
blkdev_dequeue_request(rq);
spin_unlock_irqrestore(DRIVE_LOCK(drive), flags);
} else
args->taskfile.sector_count = sectors;
taskfile.device_head = ((block >> 8) & 0x0f);
taskfile.device_head |= drive->select.all;
taskfile.command = get_command(drive, rq_data_dir(rq));
args->taskfile.sector_number = block;
args->taskfile.low_cylinder = (block >>= 8);
args->taskfile.high_cylinder = (block >>= 8);
args->taskfile.device_head = ((block >> 8) & 0x0f);
args->taskfile.device_head |= drive->select.all;
args->taskfile.command = get_command(drive, rq_data_dir(rq));
#ifdef DEBUG
printk("%s: %sing: ", drive->name,
(rq_data_dir(rq)==READ) ? "read" : "writ");
if (lba) printk("LBAsect=%lld, ", block);
else printk("CHS=%d/%d/%d, ", cyl, head, sect);
printk("sectors=%ld, ", rq->nr_sectors);
printk("sector=%lx, sectors=%ld, ", block, rq->nr_sectors);
printk("buffer=0x%08lx\n", (unsigned long) rq->buffer);
#endif
args.taskfile = taskfile;
args.hobfile = hobfile;
ide_cmd_type_parser(&args);
rq->special = &args;
ide_cmd_type_parser(args);
args->ar = ar;
rq->special = ar;
return ata_taskfile(drive, &args, rq);
return ata_taskfile(drive, args, rq);
}
/*
......@@ -242,57 +252,58 @@ static ide_startstop_t lba28_do_request(ide_drive_t *drive, struct request *rq,
* 320173056 == 163929 MB or 48bit addressing
* 1073741822 == 549756 MB or 48bit addressing fake drive
*/
static ide_startstop_t lba48_do_request(ide_drive_t *drive, struct request *rq, unsigned long long block)
static ide_startstop_t lba48_do_request(ide_drive_t *drive, struct ata_request *ar, sector_t block)
{
struct hd_drive_task_hdr taskfile;
struct hd_drive_hob_hdr hobfile;
struct ata_taskfile args;
int sectors;
struct ata_taskfile *args = &ar->ar_task;
struct request *rq = ar->ar_rq;
int sectors = rq->nr_sectors;
memset(&taskfile, 0, sizeof(struct hd_drive_task_hdr));
memset(&hobfile, 0, sizeof(struct hd_drive_hob_hdr));
memset(&args->taskfile, 0, sizeof(struct hd_drive_task_hdr));
memset(&args->hobfile, 0, sizeof(struct hd_drive_hob_hdr));
sectors = rq->nr_sectors;
if (sectors == 65536)
sectors = 0;
taskfile.sector_count = sectors;
hobfile.sector_count = sectors >> 8;
if (ar->ar_flags & ATA_AR_QUEUED) {
unsigned long flags;
args->taskfile.feature = sectors;
args->hobfile.feature = sectors >> 8;
args->taskfile.sector_count = ar->ar_tag << 3;
if (rq->nr_sectors == 65536) {
taskfile.sector_count = 0x00;
hobfile.sector_count = 0x00;
spin_lock_irqsave(DRIVE_LOCK(drive), flags);
blkdev_dequeue_request(rq);
spin_unlock_irqrestore(DRIVE_LOCK(drive), flags);
} else {
args->taskfile.sector_count = sectors;
args->hobfile.sector_count = sectors >> 8;
}
taskfile.sector_number = block; /* low lba */
taskfile.low_cylinder = (block >>= 8); /* mid lba */
taskfile.high_cylinder = (block >>= 8); /* hi lba */
args->taskfile.sector_number = block;
args->taskfile.low_cylinder = (block >>= 8);
args->taskfile.high_cylinder = (block >>= 8);
hobfile.sector_number = (block >>= 8); /* low lba */
hobfile.low_cylinder = (block >>= 8); /* mid lba */
hobfile.high_cylinder = (block >>= 8); /* hi lba */
args->hobfile.sector_number = (block >>= 8);
args->hobfile.low_cylinder = (block >>= 8);
args->hobfile.high_cylinder = (block >>= 8);
taskfile.device_head = drive->select.all;
hobfile.device_head = taskfile.device_head;
hobfile.control = (drive->ctl|0x80);
taskfile.command = get_command(drive, rq_data_dir(rq));
args->taskfile.device_head = drive->select.all;
args->hobfile.device_head = args->taskfile.device_head;
args->hobfile.control = (drive->ctl|0x80);
args->taskfile.command = get_command(drive, rq_data_dir(rq));
#ifdef DEBUG
printk("%s: %sing: ", drive->name,
(rq_data_dir(rq)==READ) ? "read" : "writ");
if (lba) printk("LBAsect=%lld, ", block);
else printk("CHS=%d/%d/%d, ", cyl, head, sect);
printk("sectors=%ld, ", rq->nr_sectors);
printk("sector=%lx, sectors=%ld, ", block, rq->nr_sectors);
printk("buffer=0x%08lx\n", (unsigned long) rq->buffer);
#endif
args.taskfile = taskfile;
args.hobfile = hobfile;
ide_cmd_type_parser(&args);
rq->special = &args;
ide_cmd_type_parser(args);
args->ar = ar;
rq->special = ar;
return ata_taskfile(drive, &args, rq);
return ata_taskfile(drive, args, rq);
}
/*
......@@ -300,8 +311,11 @@ static ide_startstop_t lba48_do_request(ide_drive_t *drive, struct request *rq,
* otherwise, to address sectors. It also takes care of issuing special
* DRIVE_CMDs.
*/
static ide_startstop_t idedisk_do_request(ide_drive_t *drive, struct request *rq, unsigned long block)
static ide_startstop_t idedisk_do_request(ide_drive_t *drive, struct request *rq, sector_t block)
{
unsigned long flags;
struct ata_request *ar;
/*
* Wait until all request have bin finished.
*/
......@@ -323,16 +337,49 @@ static ide_startstop_t idedisk_do_request(ide_drive_t *drive, struct request *rq
return promise_rw_disk(drive, rq, block);
}
/*
* get a new command (push ar further down to avoid grabbing lock here
*/
spin_lock_irqsave(DRIVE_LOCK(drive), flags);
ar = ata_ar_get(drive);
/*
* we've reached maximum queue depth, bail
*/
if (!ar) {
spin_unlock_irqrestore(DRIVE_LOCK(drive), flags);
return ide_started;
}
ar->ar_rq = rq;
if (drive->using_tcq) {
int tag = ide_get_tag(drive);
BUG_ON(drive->tcq->active_tag != -1);
/* Set the tag: */
ar->ar_flags |= ATA_AR_QUEUED;
ar->ar_tag = tag;
drive->tcq->ar[tag] = ar;
drive->tcq->active_tag = tag;
ar->ar_time = jiffies;
drive->tcq->queued++;
}
spin_unlock_irqrestore(DRIVE_LOCK(drive), flags);
/* 48-bit LBA */
if ((drive->id->cfs_enable_2 & 0x0400) && (drive->addressing))
return lba48_do_request(drive, rq, block);
return lba48_do_request(drive, ar, block);
/* 28-bit LBA */
if (drive->select.b.lba)
return lba28_do_request(drive, rq, block);
return lba28_do_request(drive, ar, block);
/* 28-bit CHS */
return chs_do_request(drive, rq, block);
return chs_do_request(drive, ar, block);
}
static int idedisk_open (struct inode *inode, struct file *filp, ide_drive_t *drive)
......@@ -411,7 +458,6 @@ static int idedisk_check_media_change (ide_drive_t *drive)
*/
static unsigned long idedisk_read_native_max_address(ide_drive_t *drive)
{
/* FIXME: This is on stack! */
struct ata_taskfile args;
unsigned long addr = 0;
......@@ -814,11 +860,71 @@ static int proc_idedisk_read_smart_values
PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
}
#ifdef CONFIG_BLK_DEV_IDE_TCQ
static int proc_idedisk_read_tcq
(char *page, char **start, off_t off, int count, int *eof, void *data)
{
ide_drive_t *drive = (ide_drive_t *) data;
char *out = page;
int len, cmds, i;
unsigned long tag_mask = 0, flags, cur_jif = jiffies, max_jif;
if (!drive->tcq) {
len = sprintf(out, "not configured\n");
PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
}
spin_lock_irqsave(&ide_lock, flags);
len = sprintf(out, "TCQ currently on:\t%s\n", drive->using_tcq ? "yes" : "no");
len += sprintf(out+len, "Max queue depth:\t%d\n",drive->queue_depth);
len += sprintf(out+len, "Max achieved depth:\t%d\n",drive->tcq->max_depth);
len += sprintf(out+len, "Max depth since last:\t%d\n",drive->tcq->max_last_depth);
len += sprintf(out+len, "Current depth:\t\t%d\n", drive->tcq->queued);
max_jif = 0;
len += sprintf(out+len, "Active tags:\t\t[ ");
for (i = 0, cmds = 0; i < drive->queue_depth; i++) {
struct ata_request *ar = IDE_GET_AR(drive, i);
if (!ar)
continue;
__set_bit(i, &tag_mask);
len += sprintf(out+len, "%d, ", i);
if (ar->ar_time > max_jif)
max_jif = ar->ar_time;
cmds++;
}
len += sprintf(out+len, "]\n");
if (drive->tcq->queued != cmds)
len += sprintf(out+len, "pending request and queue count mismatch (%d)\n", cmds);
if (tag_mask != drive->tcq->tag_mask)
len += sprintf(out+len, "tag masks differ (counted %lx != %lx\n", tag_mask, drive->tcq->tag_mask);
len += sprintf(out+len, "DMA status:\t\t%srunning\n", test_bit(IDE_DMA, &HWGROUP(drive)->flags) ? "" : "not ");
if (max_jif)
len += sprintf(out+len, "Oldest command:\t\t%lu\n", cur_jif - max_jif);
len += sprintf(out+len, "immed rel %d, immed comp %d\n", drive->tcq->immed_rel, drive->tcq->immed_comp);
drive->tcq->max_last_depth = 0;
spin_unlock_irqrestore(&ide_lock, flags);
PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
}
#endif
static ide_proc_entry_t idedisk_proc[] = {
{ "cache", S_IFREG|S_IRUGO, proc_idedisk_read_cache, NULL },
{ "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
{ "smart_values", S_IFREG|S_IRUSR, proc_idedisk_read_smart_values, NULL },
{ "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_smart_thresholds, NULL },
#ifdef CONFIG_BLK_DEV_IDE_TCQ
{ "tcq", S_IFREG|S_IRUSR, proc_idedisk_read_tcq, NULL },
#endif
{ NULL, 0, NULL, NULL }
};
......@@ -855,7 +961,7 @@ static int set_nowerr(ide_drive_t *drive, int arg)
return 0;
}
static int write_cache (ide_drive_t *drive, int arg)
static int write_cache(ide_drive_t *drive, int arg)
{
struct hd_drive_task_hdr taskfile;
struct hd_drive_hob_hdr hobfile;
......@@ -872,7 +978,7 @@ static int write_cache (ide_drive_t *drive, int arg)
return 0;
}
static int idedisk_standby (ide_drive_t *drive)
static int idedisk_standby(ide_drive_t *drive)
{
struct hd_drive_task_hdr taskfile;
struct hd_drive_hob_hdr hobfile;
......@@ -882,7 +988,7 @@ static int idedisk_standby (ide_drive_t *drive)
return ide_wait_taskfile(drive, &taskfile, &hobfile, NULL);
}
static int set_acoustic (ide_drive_t *drive, int arg)
static int set_acoustic(ide_drive_t *drive, int arg)
{
struct hd_drive_task_hdr taskfile;
struct hd_drive_hob_hdr hobfile;
......@@ -898,6 +1004,22 @@ static int set_acoustic (ide_drive_t *drive, int arg)
return 0;
}
#ifdef CONFIG_BLK_DEV_IDE_TCQ
static int set_using_tcq(ide_drive_t *drive, int arg)
{
if (!drive->driver)
return -EPERM;
if (!drive->channel->dmaproc)
return -EPERM;
drive->using_tcq = arg;
if (drive->channel->dmaproc(arg ? ide_dma_queued_on : ide_dma_queued_off, drive))
return -EIO;
return 0;
}
#endif
static int probe_lba_addressing (ide_drive_t *drive, int arg)
{
drive->addressing = 0;
......@@ -930,6 +1052,9 @@ static void idedisk_add_settings(ide_drive_t *drive)
ide_add_setting(drive, "acoustic", SETTING_RW, HDIO_GET_ACOUSTIC, HDIO_SET_ACOUSTIC, TYPE_BYTE, 0, 254, 1, 1, &drive->acoustic, set_acoustic);
ide_add_setting(drive, "failures", SETTING_RW, -1, -1, TYPE_INT, 0, 65535, 1, 1, &drive->failures, NULL);
ide_add_setting(drive, "max_failures", SETTING_RW, -1, -1, TYPE_INT, 0, 65535, 1, 1, &drive->max_failures, NULL);
#ifdef CONFIG_BLK_DEV_IDE_TCQ
ide_add_setting(drive, "using_tcq", SETTING_RW, HDIO_GET_QDMA, HDIO_SET_QDMA, TYPE_BYTE, 0, IDE_MAX_TAG, 1, 1, &drive->using_tcq, set_using_tcq);
#endif
}
static int idedisk_suspend(struct device *dev, u32 state, u32 level)
......@@ -1025,12 +1150,12 @@ static void idedisk_setup(ide_drive_t *drive)
*/
if (drvid != -1) {
sprintf(drive->device.bus_id, "%d", drvid);
sprintf(drive->device.name, "ide-disk");
drive->device.driver = &idedisk_devdrv;
drive->device.parent = &drive->channel->dev;
drive->device.driver_data = drive;
device_register(&drive->device);
sprintf(drive->device.bus_id, "%d", drvid);
sprintf(drive->device.name, "ide-disk");
drive->device.driver = &idedisk_devdrv;
drive->device.parent = &drive->channel->dev;
drive->device.driver_data = drive;
device_register(&drive->device);
}
/* Extract geometry if we did not already have one for the drive */
......@@ -1102,7 +1227,7 @@ static void idedisk_setup(ide_drive_t *drive)
drive->no_io_32bit = id->dword_io ? 1 : 0;
if (drive->id->cfs_enable_2 & 0x3000)
write_cache(drive, (id->cfs_enable_2 & 0x3000));
(void) probe_lba_addressing(drive, 1);
probe_lba_addressing(drive, 1);
}
static int idedisk_cleanup(ide_drive_t *drive)
......
drivers/ide/ide-dma.c
View file @ 17b581c6
/*
* Copyright (c) 1999-2000 Andre Hedrick <andre@linux-ide.org>
* May be copied or modified under the terms of the GNU General Public License
*/
/*
* Special Thanks to Mark for his Six years of work.
*
* Copyright (c) 1999-2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (c) 1995-1998 Mark Lord
*
* May be copied or modified under the terms of the GNU General Public License
*
* Special Thanks to Mark for his Six years of work.
*/
/*
......@@ -98,8 +95,6 @@
#define DEFAULT_BMCRBA 0xcc00 /* VIA's default value */
#define DEFAULT_BMALIBA 0xd400 /* ALI's default value */
extern char *ide_dmafunc_verbose(ide_dma_action_t dmafunc);
#ifdef CONFIG_IDEDMA_NEW_DRIVE_LISTINGS
struct drive_list_entry {
......@@ -214,29 +209,36 @@ ide_startstop_t ide_dma_intr (ide_drive_t *drive)
__ide_end_request(drive, 1, rq->nr_sectors);
return ide_stopped;
}
printk("%s: dma_intr: bad DMA status (dma_stat=%x)\n",
printk("%s: dma_intr: bad DMA status (dma_stat=%x)\n",
drive->name, dma_stat);
}
return ide_error(drive, "dma_intr", stat);
}
static int ide_build_sglist(struct ata_channel *hwif, struct request *rq)
int ide_build_sglist(struct ata_channel *hwif, struct request *rq)
{
request_queue_t *q = &hwif->drives[DEVICE_NR(rq->rq_dev) & 1].queue;
struct scatterlist *sg = hwif->sg_table;
int nents;
struct ata_request *ar = rq->special;
nents = blk_rq_map_sg(q, rq, hwif->sg_table);
if (!(ar->ar_flags & ATA_AR_SETUP)) {
ar->ar_flags |= ATA_AR_SETUP;
ar->ar_sg_nents = blk_rq_map_sg(q, rq, ar->ar_sg_table);
}
if (rq->q && nents > rq->nr_phys_segments)
printk("ide-dma: received %d phys segments, build %d\n", rq->nr_phys_segments, nents);
if (rq->q && ar->ar_sg_nents > rq->nr_phys_segments) {
printk("%s: received %d phys segments, build %d\n", __FILE__, rq->nr_phys_segments, ar->ar_sg_nents);
return 0;
} else if (!ar->ar_sg_nents) {
printk("%s: zero segments in request\n", __FILE__);
return 0;
}
if (rq_data_dir(rq) == READ)
hwif->sg_dma_direction = PCI_DMA_FROMDEVICE;
ar->ar_sg_ddir = PCI_DMA_FROMDEVICE;
else
hwif->sg_dma_direction = PCI_DMA_TODEVICE;
ar->ar_sg_ddir = PCI_DMA_TODEVICE;
return pci_map_sg(hwif->pci_dev, sg, nents, hwif->sg_dma_direction);
return pci_map_sg(hwif->pci_dev, ar->ar_sg_table, ar->ar_sg_nents, ar->ar_sg_ddir);
}
/*
......@@ -245,23 +247,17 @@ static int ide_build_sglist(struct ata_channel *hwif, struct request *rq)
*/
static int raw_build_sglist(struct ata_channel *ch, struct request *rq)
{
struct scatterlist *sg = ch->sg_table;
int nents = 0;
struct ata_taskfile *args = rq->special;
#if 1
struct ata_request *ar = rq->special;
struct scatterlist *sg = ar->ar_sg_table;
struct ata_taskfile *args = &ar->ar_task;
unsigned char *virt_addr = rq->buffer;
int sector_count = rq->nr_sectors;
#else
nents = blk_rq_map_sg(rq->q, rq, ch->sg_table);
if (nents > rq->nr_segments)
printk("ide-dma: received %d segments, build %d\n", rq->nr_segments, nents);
#endif
int nents = 0;
if (args->command_type == IDE_DRIVE_TASK_RAW_WRITE)
ch->sg_dma_direction = PCI_DMA_TODEVICE;
ar->ar_sg_ddir = PCI_DMA_TODEVICE;
else
ch->sg_dma_direction = PCI_DMA_FROMDEVICE;
ar->ar_sg_ddir = PCI_DMA_FROMDEVICE;
if (sector_count > 128) {
memset(&sg[nents], 0, sizeof(*sg));
......@@ -279,18 +275,18 @@ static int raw_build_sglist(struct ata_channel *ch, struct request *rq)
sg[nents].length = sector_count * SECTOR_SIZE;
nents++;
return pci_map_sg(ch->pci_dev, sg, nents, ch->sg_dma_direction);
return pci_map_sg(ch->pci_dev, sg, nents, ar->ar_sg_ddir);
}
/*
* ide_build_dmatable() prepares a dma request.
* Prepare a dma request.
* Returns 0 if all went okay, returns 1 otherwise.
* May also be invoked from trm290.c
* This may also be invoked from trm290.c
*/
int ide_build_dmatable (ide_drive_t *drive, ide_dma_action_t func)
int ide_build_dmatable(ide_drive_t *drive, struct request *rq,
ide_dma_action_t func)
{
struct ata_channel *hwif = drive->channel;
unsigned int *table = hwif->dmatable_cpu;
#ifdef CONFIG_BLK_DEV_TRM290
unsigned int is_trm290_chipset = (hwif->chipset == ide_trm290);
#else
......@@ -299,16 +295,19 @@ int ide_build_dmatable (ide_drive_t *drive, ide_dma_action_t func)
unsigned int count = 0;
int i;
struct scatterlist *sg;
struct ata_request *ar = rq->special;
unsigned int *table = ar->ar_dmatable_cpu;
if (HWGROUP(drive)->rq->flags & REQ_DRIVE_TASKFILE) {
hwif->sg_nents = i = raw_build_sglist(hwif, HWGROUP(drive)->rq);
} else {
hwif->sg_nents = i = ide_build_sglist(hwif, HWGROUP(drive)->rq);
}
if (!i)
if (rq->flags & REQ_DRIVE_TASKFILE)
ar->ar_sg_nents = raw_build_sglist(hwif, rq);
else
ar->ar_sg_nents = ide_build_sglist(hwif, rq);
if (!ar->ar_sg_nents)
return 0;
sg = hwif->sg_table;
sg = ar->ar_sg_table;
i = ar->ar_sg_nents;
while (i) {
u32 cur_addr;
u32 cur_len;
......@@ -327,7 +326,7 @@ int ide_build_dmatable (ide_drive_t *drive, ide_dma_action_t func)
if (count++ >= PRD_ENTRIES) {
printk("ide-dma: req %p\n", HWGROUP(drive)->rq);
printk("count %d, sg_nents %d, cur_len %d, cur_addr %u\n", count, hwif->sg_nents, cur_len, cur_addr);
printk("count %d, sg_nents %d, cur_len %d, cur_addr %u\n", count, ar->ar_sg_nents, cur_len, cur_addr);
BUG();
}
......@@ -338,7 +337,7 @@ int ide_build_dmatable (ide_drive_t *drive, ide_dma_action_t func)
if (is_trm290_chipset)
xcount = ((xcount >> 2) - 1) << 16;
if (xcount == 0x0000) {
/*
/*
* Most chipsets correctly interpret a length of
* 0x0000 as 64KB, but at least one (e.g. CS5530)
* misinterprets it as zero (!). So here we break
......@@ -346,8 +345,8 @@ int ide_build_dmatable (ide_drive_t *drive, ide_dma_action_t func)
*/
if (count++ >= PRD_ENTRIES) {
pci_unmap_sg(hwif->pci_dev, sg,
hwif->sg_nents,
hwif->sg_dma_direction);
ar->ar_sg_nents,
ar->ar_sg_ddir);
return 0;
}
......@@ -376,10 +375,9 @@ int ide_build_dmatable (ide_drive_t *drive, ide_dma_action_t func)
void ide_destroy_dmatable (ide_drive_t *drive)
{
struct pci_dev *dev = drive->channel->pci_dev;
struct scatterlist *sg = drive->channel->sg_table;
int nents = drive->channel->sg_nents;
struct ata_request *ar = IDE_CUR_AR(drive);
pci_unmap_sg(dev, sg, nents, drive->channel->sg_dma_direction);
pci_unmap_sg(dev, ar->ar_sg_table, ar->ar_sg_nents, ar->ar_sg_ddir);
}
/*
......@@ -437,7 +435,7 @@ int report_drive_dmaing (ide_drive_t *drive)
printk(", UDMA(133)"); /* UDMA BIOS-enabled! */
}
} else if ((id->field_valid & 4) && (eighty_ninty_three(drive)) &&
(id->dma_ultra & (id->dma_ultra >> 11) & 7)) {
(id->dma_ultra & (id->dma_ultra >> 11) & 7)) {
if ((id->dma_ultra >> 13) & 1) {
printk(", UDMA(100)"); /* UDMA BIOS-enabled! */
} else if ((id->dma_ultra >> 12) & 1) {
......@@ -539,6 +537,32 @@ static void ide_toggle_bounce(ide_drive_t *drive, int on)
blk_queue_bounce_limit(&drive->queue, addr);
}
/*
* Start DMA engine.
*/
int ide_start_dma(struct ata_channel *hwif, ide_drive_t *drive, ide_dma_action_t func)
{
unsigned int reading = 0, count;
unsigned long dma_base = hwif->dma_base;
struct ata_request *ar = IDE_CUR_AR(drive);
if (rq_data_dir(ar->ar_rq) == READ)
reading = 1 << 3;
if (hwif->rwproc)
hwif->rwproc(drive, func);
if (!(count = ide_build_dmatable(drive, ar->ar_rq, func)))
return 1; /* try PIO instead of DMA */
ar->ar_flags |= ATA_AR_SETUP;
outl(ar->ar_dmatable, dma_base + 4); /* PRD table */
outb(reading, dma_base); /* specify r/w */
outb(inb(dma_base + 2) | 6, dma_base+2);/* clear INTR & ERROR flags */
drive->waiting_for_dma = 1;
return 0;
}
/*
* ide_dmaproc() initiates/aborts DMA read/write operations on a drive.
*
......@@ -559,15 +583,17 @@ int ide_dmaproc (ide_dma_action_t func, ide_drive_t *drive)
{
struct ata_channel *hwif = drive->channel;
unsigned long dma_base = hwif->dma_base;
byte unit = (drive->select.b.unit & 0x01);
unsigned int count, reading = 0, set_high = 1;
byte dma_stat;
u8 unit = (drive->select.b.unit & 0x01);
unsigned int reading = 0, set_high = 1;
struct ata_request *ar;
u8 dma_stat;
switch (func) {
case ide_dma_off:
printk("%s: DMA disabled\n", drive->name);
case ide_dma_off_quietly:
set_high = 0;
drive->using_tcq = 0;
outb(inb(dma_base+2) & ~(1<<(5+unit)), dma_base+2);
case ide_dma_on:
ide_toggle_bounce(drive, set_high);
......@@ -577,48 +603,66 @@ int ide_dmaproc (ide_dma_action_t func, ide_drive_t *drive)
return 0;
case ide_dma_check:
return config_drive_for_dma (drive);
case ide_dma_begin:
#ifdef DEBUG
printk("ide_dma_begin: from %p\n", __builtin_return_address(0));
#endif
if (test_and_set_bit(IDE_DMA, &HWGROUP(drive)->flags))
BUG();
/* Note that this is done *after* the cmd has
* been issued to the drive, as per the BM-IDE spec.
* The Promise Ultra33 doesn't work correctly when
* we do this part before issuing the drive cmd.
*/
outb(inb(dma_base)|1, dma_base); /* start DMA */
return 0;
#ifdef CONFIG_BLK_DEV_IDE_TCQ
case ide_dma_queued_on:
case ide_dma_queued_off:
case ide_dma_read_queued:
case ide_dma_write_queued:
case ide_dma_queued_start:
return ide_tcq_dmaproc(func, drive);
#endif
case ide_dma_read:
reading = 1 << 3;
case ide_dma_write:
/* active tuning based on IO direction */
if (hwif->rwproc)
hwif->rwproc(drive, func);
if (!(count = ide_build_dmatable(drive, func)))
return 1; /* try PIO instead of DMA */
outl(hwif->dmatable_dma, dma_base + 4); /* PRD table */
outb(reading, dma_base); /* specify r/w */
outb(inb(dma_base+2)|6, dma_base+2); /* clear INTR & ERROR flags */
drive->waiting_for_dma = 1;
ar = HWGROUP(drive)->rq->special;
if (ide_start_dma(hwif, drive, func))
return 1;
if (drive->type != ATA_DISK)
return 0;
BUG_ON(HWGROUP(drive)->handler);
ide_set_handler(drive, &ide_dma_intr, WAIT_CMD, dma_timer_expiry); /* issue cmd to drive */
if ((HWGROUP(drive)->rq->flags & REQ_DRIVE_TASKFILE) &&
if ((ar->ar_rq->flags & REQ_DRIVE_TASKFILE) &&
(drive->addressing == 1)) {
struct ata_taskfile *args = HWGROUP(drive)->rq->special;
struct ata_taskfile *args = &ar->ar_task;
OUT_BYTE(args->taskfile.command, IDE_COMMAND_REG);
} else if (drive->addressing) {
OUT_BYTE(reading ? WIN_READDMA_EXT : WIN_WRITEDMA_EXT, IDE_COMMAND_REG);
} else {
OUT_BYTE(reading ? WIN_READDMA : WIN_WRITEDMA, IDE_COMMAND_REG);
}
return drive->channel->dmaproc(ide_dma_begin, drive);
case ide_dma_begin:
/* Note that this is done *after* the cmd has
* been issued to the drive, as per the BM-IDE spec.
* The Promise Ultra33 doesn't work correctly when
* we do this part before issuing the drive cmd.
*/
outb(inb(dma_base)|1, dma_base); /* start DMA */
return 0;
return hwif->dmaproc(ide_dma_begin, drive);
case ide_dma_end: /* returns 1 on error, 0 otherwise */
#ifdef DEBUG
printk("ide_dma_end: from %p\n", __builtin_return_address(0));
#endif
if (!test_and_clear_bit(IDE_DMA, &HWGROUP(drive)->flags)) {
printk("ide_dma_end: dma not going? %p\n", __builtin_return_address(0));
return 1;
}
drive->waiting_for_dma = 0;
outb(inb(dma_base)&~1, dma_base); /* stop DMA */
dma_stat = inb(dma_base+2); /* get DMA status */
dma_stat = inb(dma_base+2); /* get DMA status */
outb(dma_stat|6, dma_base+2); /* clear the INTR & ERROR bits */
ide_destroy_dmatable(drive); /* purge DMA mappings */
if (drive->tcq)
IDE_SET_CUR_TAG(drive, -1);
return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0; /* verify good DMA status */
case ide_dma_test_irq: /* returns 1 if dma irq issued, 0 otherwise */
dma_stat = inb(dma_base+2);
......@@ -635,14 +679,14 @@ int ide_dmaproc (ide_dma_action_t func, ide_drive_t *drive)
case ide_dma_verbose:
return report_drive_dmaing(drive);
case ide_dma_timeout:
printk("ide_dmaproc: DMA timeout occured!\n");
printk(KERN_ERR "%s: DMA timeout occured!\n", __FUNCTION__);
return 1;
case ide_dma_retune:
case ide_dma_lostirq:
printk("ide_dmaproc: chipset supported %s func only: %d\n", ide_dmafunc_verbose(func), func);
printk(KERN_ERR "%s: chipset supported func only: %d\n", __FUNCTION__, func);
return 1;
default:
printk("ide_dmaproc: unsupported %s func: %d\n", ide_dmafunc_verbose(func), func);
printk(KERN_ERR "%s: unsupported func: %d\n", __FUNCTION__, func);
return 1;
}
}
......@@ -655,17 +699,6 @@ void ide_release_dma(struct ata_channel *hwif)
if (!hwif->dma_base)
return;
if (hwif->dmatable_cpu) {
pci_free_consistent(hwif->pci_dev,
PRD_ENTRIES * PRD_BYTES,
hwif->dmatable_cpu,
hwif->dmatable_dma);
hwif->dmatable_cpu = NULL;
}
if (hwif->sg_table) {
kfree(hwif->sg_table);
hwif->sg_table = NULL;
}
if ((hwif->dma_extra) && (hwif->unit == 0))
release_region((hwif->dma_base + 16), hwif->dma_extra);
release_region(hwif->dma_base, 8);
......@@ -684,20 +717,6 @@ void ide_setup_dma(struct ata_channel *hwif, unsigned long dma_base, unsigned in
}
request_region(dma_base, num_ports, hwif->name);
hwif->dma_base = dma_base;
hwif->dmatable_cpu = pci_alloc_consistent(hwif->pci_dev,
PRD_ENTRIES * PRD_BYTES,
&hwif->dmatable_dma);
if (hwif->dmatable_cpu == NULL)
goto dma_alloc_failure;
hwif->sg_table = kmalloc(sizeof(struct scatterlist) * PRD_ENTRIES,
GFP_KERNEL);
if (hwif->sg_table == NULL) {
pci_free_consistent(hwif->pci_dev, PRD_ENTRIES * PRD_BYTES,
hwif->dmatable_cpu, hwif->dmatable_dma);
goto dma_alloc_failure;
}
hwif->dmaproc = &ide_dmaproc;
if (hwif->chipset != ide_trm290) {
......@@ -708,7 +727,4 @@ void ide_setup_dma(struct ata_channel *hwif, unsigned long dma_base, unsigned in
}
printk("\n");
return;
dma_alloc_failure:
printk(" -- ERROR, UNABLE TO ALLOCATE DMA TABLES\n");
}
drivers/ide/ide-features.c
View file @ 17b581c6
......@@ -69,34 +69,6 @@ char *ide_xfer_verbose (byte xfer_rate)
}
}
/*
* A Verbose noise maker for debugging on the attempted dmaing calls.
*/
char *ide_dmafunc_verbose (ide_dma_action_t dmafunc)
{
switch (dmafunc) {
case ide_dma_read: return("ide_dma_read");
case ide_dma_write: return("ide_dma_write");
case ide_dma_begin: return("ide_dma_begin");
case ide_dma_end: return("ide_dma_end:");
case ide_dma_check: return("ide_dma_check");
case ide_dma_on: return("ide_dma_on");
case ide_dma_off: return("ide_dma_off");
case ide_dma_off_quietly: return("ide_dma_off_quietly");
case ide_dma_test_irq: return("ide_dma_test_irq");
case ide_dma_bad_drive: return("ide_dma_bad_drive");
case ide_dma_good_drive: return("ide_dma_good_drive");
case ide_dma_verbose: return("ide_dma_verbose");
case ide_dma_retune: return("ide_dma_retune");
case ide_dma_lostirq: return("ide_dma_lostirq");
case ide_dma_timeout: return("ide_dma_timeout");
default: return("unknown");
}
}
/*
*
*/
byte ide_auto_reduce_xfer (ide_drive_t *drive)
{
if (!drive->crc_count)
......@@ -122,9 +94,6 @@ byte ide_auto_reduce_xfer (ide_drive_t *drive)
}
}
/*
* Update the
*/
int ide_driveid_update (ide_drive_t *drive)
{
/*
......@@ -195,10 +164,10 @@ int ide_ata66_check (ide_drive_t *drive, struct ata_taskfile *args)
}
#ifndef CONFIG_IDEDMA_IVB
if ((drive->id->hw_config & 0x6000) == 0) {
#else /* !CONFIG_IDEDMA_IVB */
#else
if (((drive->id->hw_config & 0x2000) == 0) ||
((drive->id->hw_config & 0x4000) == 0)) {
#endif /* CONFIG_IDEDMA_IVB */
#endif
printk("%s: Speed warnings UDMA 3/4/5 is not functional.\n", drive->name);
return 1;
}
......@@ -232,7 +201,7 @@ byte eighty_ninty_three (ide_drive_t *drive)
return ((byte) ((drive->channel->udma_four) &&
#ifndef CONFIG_IDEDMA_IVB
(drive->id->hw_config & 0x4000) &&
#endif /* CONFIG_IDEDMA_IVB */
#endif
(drive->id->hw_config & 0x6000)) ? 1 : 0);
}
......
drivers/ide/ide-pmac.c
View file @ 17b581c6
......@@ -52,7 +52,6 @@
#endif
#include "ata-timing.h"
extern char *ide_dmafunc_verbose(ide_dma_action_t dmafunc);
extern spinlock_t ide_lock;
#undef IDE_PMAC_DEBUG
......@@ -1460,10 +1459,10 @@ int pmac_ide_dmaproc(ide_dma_action_t func, ide_drive_t *drive)
case ide_dma_retune:
case ide_dma_lostirq:
case ide_dma_timeout:
printk(KERN_WARNING "ide_pmac_dmaproc: chipset supported %s func only: %d\n", ide_dmafunc_verbose(func), func);
printk(KERN_WARNING "ide_pmac_dmaproc: chipset supported func only: %d\n", func);
return 1;
default:
printk(KERN_WARNING "ide_pmac_dmaproc: unsupported %s func: %d\n", ide_dmafunc_verbose(func), func);
printk(KERN_WARNING "ide_pmac_dmaproc: unsupported func: %d\n", func);
return 1;
}
return 0;
......
drivers/ide/ide-probe.c
View file @ 17b581c6
......@@ -189,6 +189,21 @@ static inline void do_identify (ide_drive_t *drive, byte cmd)
if (drive->channel->quirkproc)
drive->quirk_list = drive->channel->quirkproc(drive);
/*
* it's an ata drive, build command list
*/
#ifndef CONFIG_BLK_DEV_IDE_TCQ
drive->queue_depth = 1;
#else
drive->queue_depth = drive->id->queue_depth + 1;
if (drive->queue_depth > CONFIG_BLK_DEV_IDE_TCQ_DEPTH)
drive->queue_depth = CONFIG_BLK_DEV_IDE_TCQ_DEPTH;
if (drive->queue_depth < 1 || drive->queue_depth > IDE_MAX_TAG)
drive->queue_depth = IDE_MAX_TAG;
#endif
if (ide_build_commandlist(drive))
goto err_misc;
return;
err_misc:
......@@ -593,10 +608,10 @@ static void ide_init_queue(ide_drive_t *drive)
blk_queue_max_sectors(q, max_sectors);
/* IDE DMA can do PRD_ENTRIES number of segments. */
blk_queue_max_hw_segments(q, PRD_ENTRIES);
blk_queue_max_hw_segments(q, PRD_SEGMENTS);
/* This is a driver limit and could be eliminated. */
blk_queue_max_phys_segments(q, PRD_ENTRIES);
blk_queue_max_phys_segments(q, PRD_SEGMENTS);
}
#if MAX_HWIFS > 1
......
drivers/ide/ide-taskfile.c
View file @ 17b581c6
......@@ -291,7 +291,8 @@ void ata_poll_drive_ready(ide_drive_t *drive)
static ide_startstop_t pre_task_mulout_intr(ide_drive_t *drive, struct request *rq)
{
struct ata_taskfile *args = rq->special;
struct ata_request *ar = rq->special;
struct ata_taskfile *args = &ar->ar_task;
ide_startstop_t startstop;
/*
......@@ -434,11 +435,35 @@ ide_startstop_t ata_taskfile(ide_drive_t *drive,
if (args->prehandler != NULL)
return args->prehandler(drive, rq);
} else {
/* for dma commands we down set the handler */
if (drive->using_dma &&
!(drive->channel->dmaproc(((args->taskfile.command == WIN_WRITEDMA)
|| (args->taskfile.command == WIN_WRITEDMA_EXT))
? ide_dma_write : ide_dma_read, drive)));
ide_dma_action_t dmaaction;
u8 command;
if (!drive->using_dma)
return ide_started;
command = args->taskfile.command;
#ifdef CONFIG_BLK_DEV_IDE_TCQ
if (drive->using_tcq) {
if (command == WIN_READDMA_QUEUED
|| command == WIN_READDMA_QUEUED_EXT
|| command == WIN_WRITEDMA_QUEUED
|| command == WIN_READDMA_QUEUED_EXT)
return ide_start_tag(ide_dma_queued_start, drive, rq->special);
}
#endif
if (command == WIN_WRITEDMA || command == WIN_WRITEDMA_EXT)
dmaaction = ide_dma_write;
else if (command == WIN_READDMA || command == WIN_READDMA_EXT)
dmaaction = ide_dma_read;
else
return ide_stopped;
if (!drive->channel->dmaproc(dmaaction, drive))
return ide_started;
return ide_stopped;
}
return ide_started;
......@@ -495,8 +520,9 @@ ide_startstop_t recal_intr(ide_drive_t *drive)
*/
ide_startstop_t task_no_data_intr (ide_drive_t *drive)
{
struct ata_taskfile *args = HWGROUP(drive)->rq->special;
byte stat = GET_STAT();
struct ata_request *ar = HWGROUP(drive)->rq->special;
struct ata_taskfile *args = &ar->ar_task;
u8 stat = GET_STAT();
ide__sti(); /* local CPU only */
......@@ -555,7 +581,8 @@ static ide_startstop_t task_in_intr (ide_drive_t *drive)
static ide_startstop_t pre_task_out_intr(ide_drive_t *drive, struct request *rq)
{
struct ata_taskfile *args = rq->special;
struct ata_request *ar = rq->special;
struct ata_taskfile *args = &ar->ar_task;
ide_startstop_t startstop;
if (ide_wait_stat(&startstop, drive, DATA_READY, drive->bad_wstat, WAIT_DRQ)) {
......@@ -644,7 +671,7 @@ static ide_startstop_t task_mulin_intr(ide_drive_t *drive)
pBuf = ide_map_rq(rq, &flags);
DTF("Multiread: %p, nsect: %d , rq->current_nr_sectors: %ld\n",
DTF("Multiread: %p, nsect: %d , rq->current_nr_sectors: %d\n",
pBuf, nsect, rq->current_nr_sectors);
drive->io_32bit = 0;
taskfile_input_data(drive, pBuf, nsect * SECTOR_WORDS);
......@@ -858,7 +885,7 @@ void ide_cmd_type_parser(struct ata_taskfile *args)
/*
* This function is intended to be used prior to invoking ide_do_drive_cmd().
*/
static void init_taskfile_request(struct request *rq)
void init_taskfile_request(struct request *rq)
{
memset(rq, 0, sizeof(*rq));
rq->flags = REQ_DRIVE_TASKFILE;
......@@ -875,23 +902,24 @@ static void init_taskfile_request(struct request *rq)
int ide_wait_taskfile(ide_drive_t *drive, struct hd_drive_task_hdr *taskfile, struct hd_drive_hob_hdr *hobfile, byte *buf)
{
struct request rq;
/* FIXME: This is on stack! */
struct ata_taskfile args;
struct ata_request ar;
struct ata_taskfile *args = &ar.ar_task;
memset(&args, 0, sizeof(args));
ata_ar_init(drive, &ar);
args.taskfile = *taskfile;
args.hobfile = *hobfile;
memcpy(&args->taskfile, taskfile, sizeof(*taskfile));
if (hobfile)
memcpy(&args->hobfile, hobfile, sizeof(*hobfile));
init_taskfile_request(&rq);
/* This is kept for internal use only !!! */
ide_cmd_type_parser(&args);
if (args.command_type != IDE_DRIVE_TASK_NO_DATA)
ide_cmd_type_parser(args);
if (args->command_type != IDE_DRIVE_TASK_NO_DATA)
rq.current_nr_sectors = rq.nr_sectors = (hobfile->sector_count << 8) | taskfile->sector_count;
rq.buffer = buf;
rq.special = &args;
rq.special = &ar;
return ide_do_drive_cmd(drive, &rq, ide_wait);
}
......@@ -899,15 +927,19 @@ int ide_wait_taskfile(ide_drive_t *drive, struct hd_drive_task_hdr *taskfile, st
int ide_raw_taskfile(ide_drive_t *drive, struct ata_taskfile *args, byte *buf)
{
struct request rq;
struct ata_request ar;
ata_ar_init(drive, &ar);
init_taskfile_request(&rq);
rq.buffer = buf;
memcpy(&ar.ar_task, args, sizeof(*args));
if (args->command_type != IDE_DRIVE_TASK_NO_DATA)
rq.current_nr_sectors = rq.nr_sectors
= (args->hobfile.sector_count << 8)
| args->taskfile.sector_count;
rq.special = args;
rq.special = &ar;
return ide_do_drive_cmd(drive, &rq, ide_wait);
}
......
drivers/ide/ide-tcq.c 0 → 100644
View file @ 17b581c6
/*
* Copyright (C) 2001, 2002 Jens Axboe <axboe@suse.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* Support for the DMA queued protocol, which enables ATA disk drives to
* use tagged command queueing.
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ide.h>
#include <asm/delay.h>
/*
* warning: it will be _very_ verbose if set to 1
*/
#if 0
#define TCQ_PRINTK printk
#else
#define TCQ_PRINTK(x...)
#endif
/*
* use nIEN or not
*/
#undef IDE_TCQ_NIEN
/*
* we are leaving the SERVICE interrupt alone, IBM drives have it
* on per default and it can't be turned off. Doesn't matter, this
* is the sane config.
*/
#undef IDE_TCQ_FIDDLE_SI
int ide_tcq_end(ide_drive_t *drive);
ide_startstop_t ide_dmaq_intr(ide_drive_t *drive);
static inline void drive_ctl_nien(ide_drive_t *drive, int clear)
{
#ifdef IDE_TCQ_NIEN
int mask = clear ? 0 : 2;
if (IDE_CONTROL_REG)
OUT_BYTE(drive->ctl | mask, IDE_CONTROL_REG);
#endif
}
/*
* if we encounter _any_ error doing I/O to one of the tags, we must
* invalidate the pending queue. clear the software busy queue and requeue
* on the request queue for restart. issue a WIN_NOP to clear hardware queue
*/
static void ide_tcq_invalidate_queue(ide_drive_t *drive)
{
request_queue_t *q = &drive->queue;
unsigned long flags;
struct ata_request *ar;
int i;
printk("%s: invalidating pending queue\n", drive->name);
spin_lock_irqsave(&ide_lock, flags);
del_timer(&HWGROUP(drive)->timer);
/*
* assume oldest commands have the higher tags... doesn't matter
* much. shove requests back into request queue.
*/
for (i = drive->queue_depth - 1; i; i--) {
ar = drive->tcq->ar[i];
if (!ar)
continue;
ar->ar_rq->special = NULL;
ar->ar_rq->flags &= ~REQ_STARTED;
_elv_add_request(q, ar->ar_rq, 0, 0);
ata_ar_put(drive, ar);
}
drive->tcq->queued = 0;
drive->using_tcq = 0;
drive->queue_depth = 1;
clear_bit(IDE_BUSY, &HWGROUP(drive)->flags);
clear_bit(IDE_DMA, &HWGROUP(drive)->flags);
HWGROUP(drive)->handler = NULL;
/*
* do some internal stuff -- we really need this command to be
* executed before any new commands are started. issue a NOP
* to clear internal queue on drive
*/
ar = ata_ar_get(drive);
memset(&ar->ar_task, 0, sizeof(ar->ar_task));
AR_TASK_CMD(ar) = WIN_NOP;
ide_cmd_type_parser(&ar->ar_task);
ar->ar_rq = &HWGROUP(drive)->wrq;
init_taskfile_request(ar->ar_rq);
ar->ar_rq->rq_dev = mk_kdev(drive->channel->major, (drive->select.b.unit)<<PARTN_BITS);
ar->ar_rq->special = ar;
ar->ar_flags |= ATA_AR_RETURN;
_elv_add_request(q, ar->ar_rq, 0, 0);
/*
* make sure that nIEN is cleared
*/
drive_ctl_nien(drive, 0);
/*
* start doing stuff again
*/
q->request_fn(q);
spin_unlock_irqrestore(&ide_lock, flags);
printk("ide_tcq_invalidate_queue: done\n");
}
void ide_tcq_intr_timeout(unsigned long data)
{
ide_hwgroup_t *hwgroup = (ide_hwgroup_t *) data;
unsigned long flags;
ide_drive_t *drive;
printk("ide_tcq_intr_timeout: timeout waiting for interrupt...\n");
spin_lock_irqsave(&ide_lock, flags);
if (test_bit(IDE_BUSY, &hwgroup->flags))
printk("ide_tcq_intr_timeout: hwgroup not busy\n");
if (hwgroup->handler == NULL)
printk("ide_tcq_intr_timeout: missing isr!\n");
if ((drive = hwgroup->drive) == NULL)
printk("ide_tcq_intr_timeout: missing drive!\n");
spin_unlock_irqrestore(&ide_lock, flags);
if (drive)
ide_tcq_invalidate_queue(drive);
}
void ide_tcq_set_intr(ide_hwgroup_t *hwgroup, ide_handler_t *handler)
{
unsigned long flags;
spin_lock_irqsave(&ide_lock, flags);
/*
* always just bump the timer for now, the timeout handling will
* have to be changed to be per-command
*/
hwgroup->timer.function = ide_tcq_intr_timeout;
hwgroup->timer.data = (unsigned long) hwgroup;
mod_timer(&hwgroup->timer, jiffies + 5 * HZ);
hwgroup->handler = handler;
spin_unlock_irqrestore(&ide_lock, flags);
}
/*
* wait 400ns, then poll for busy_mask to clear from alt status
*/
#define IDE_TCQ_WAIT (10000)
int ide_tcq_wait_altstat(ide_drive_t *drive, byte *stat, byte busy_mask)
{
int i;
/*
* one initial udelay(1) should be enough, reading alt stat should
* provide the required delay...
*/
*stat = 0;
i = 0;
do {
udelay(1);
if (unlikely(i++ > IDE_TCQ_WAIT))
return 1;
} while ((*stat = GET_ALTSTAT()) & busy_mask);
return 0;
}
/*
* issue SERVICE command to drive -- drive must have been selected first,
* and it must have reported a need for service (status has SERVICE_STAT set)
*
* Also, nIEN must be set as not to need protection against ide_dmaq_intr
*/
ide_startstop_t ide_service(ide_drive_t *drive)
{
struct ata_request *ar;
byte feat, tag, stat;
if (test_bit(IDE_DMA, &HWGROUP(drive)->flags))
printk("ide_service: DMA in progress\n");
/*
* need to select the right drive first...
*/
if (drive != HWGROUP(drive)->drive) {
SELECT_DRIVE(drive->channel, drive);
udelay(10);
}
drive_ctl_nien(drive, 1);
/*
* send SERVICE, wait 400ns, wait for BUSY_STAT to clear
*/
OUT_BYTE(WIN_QUEUED_SERVICE, IDE_COMMAND_REG);
if (ide_tcq_wait_altstat(drive, &stat, BUSY_STAT)) {
printk("ide_service: BUSY clear took too long\n");
ide_tcq_invalidate_queue(drive);
return ide_stopped;
}
drive_ctl_nien(drive, 0);
/*
* FIXME, invalidate queue
*/
if (stat & ERR_STAT) {
printk("%s: error SERVICING drive (%x)\n", drive->name, stat);
ide_dump_status(drive, "ide_service", stat);
return ide_tcq_end(drive);
}
/*
* should not happen, a buggy device could introduce loop
*/
if ((feat = GET_FEAT()) & NSEC_REL) {
printk("%s: release in service\n", drive->name);
IDE_SET_CUR_TAG(drive, -1);
return ide_stopped;
}
/*
* start dma
*/
tag = feat >> 3;
IDE_SET_CUR_TAG(drive, tag);
TCQ_PRINTK("ide_service: stat %x, feat %x\n", stat, feat);
if ((ar = IDE_CUR_TAG(drive)) == NULL) {
printk("ide_service: missing request for tag %d\n", tag);
return ide_stopped;
}
/*
* we'll start a dma read or write, device will trigger
* interrupt to indicate end of transfer, release is not allowed
*/
if (rq_data_dir(ar->ar_rq) == READ) {
TCQ_PRINTK("ide_service: starting READ %x\n", stat);
drive->channel->dmaproc(ide_dma_read_queued, drive);
} else {
TCQ_PRINTK("ide_service: starting WRITE %x\n", stat);
drive->channel->dmaproc(ide_dma_write_queued, drive);
}
/*
* dmaproc set intr handler
*/
return ide_started;
}
ide_startstop_t ide_check_service(ide_drive_t *drive)
{
byte stat;
if (!ide_pending_commands(drive))
return ide_stopped;
if ((stat = GET_STAT()) & SERVICE_STAT)
return ide_service(drive);
/*
* we have pending commands, wait for interrupt
*/
ide_tcq_set_intr(HWGROUP(drive), ide_dmaq_intr);
return ide_started;
}
int ide_tcq_end(ide_drive_t *drive)
{
byte stat = GET_STAT();
if (stat & ERR_STAT) {
ide_dump_status(drive, "ide_tcq_end", stat);
ide_tcq_invalidate_queue(drive);
return ide_stopped;
} else if (stat & SERVICE_STAT) {
TCQ_PRINTK("ide_tcq_end: serv stat=%x\n", stat);
return ide_service(drive);
}
TCQ_PRINTK("ide_tcq_end: stat=%x, feat=%x\n", stat, GET_FEAT());
return ide_stopped;
}
ide_startstop_t ide_dmaq_complete(ide_drive_t *drive, byte stat)
{
struct ata_request *ar;
byte dma_stat;
#if 0
byte feat = GET_FEAT();
if ((feat & (NSEC_CD | NSEC_IO)) != (NSEC_CD | NSEC_IO))
printk("%s: C/D | I/O not set\n", drive->name);
#endif
/*
* transfer was in progress, stop DMA engine
*/
ar = IDE_CUR_TAG(drive);
dma_stat = drive->channel->dmaproc(ide_dma_end, drive);
/*
* must be end of I/O, check status and complete as necessary
*/
if (unlikely(!OK_STAT(stat, READY_STAT, drive->bad_wstat | DRQ_STAT))) {
printk("ide_dmaq_intr: %s: error status %x\n", drive->name, stat);
ide_dump_status(drive, "ide_dmaq_intr", stat);
ide_tcq_invalidate_queue(drive);
return ide_stopped;
}
if (dma_stat)
printk("%s: bad DMA status (dma_stat=%x)\n", drive->name, dma_stat);
TCQ_PRINTK("ide_dmaq_intr: ending %p, tag %d\n", ar, ar->ar_tag);
ide_end_queued_request(drive, !dma_stat, ar->ar_rq);
IDE_SET_CUR_TAG(drive, -1);
return ide_check_service(drive);
}
/*
* intr handler for queued dma operations. this can be entered for two
* reasons:
*
* 1) device has completed dma transfer
* 2) service request to start a command
*
* if the drive has an active tag, we first complete that request before
* processing any pending SERVICE.
*/
ide_startstop_t ide_dmaq_intr(ide_drive_t *drive)
{
byte stat = GET_STAT();
TCQ_PRINTK("ide_dmaq_intr: stat=%x, tag %d\n", stat, drive->tcq->active_tag);
/*
* if a command completion interrupt is pending, do that first and
* check service afterwards
*/
if (drive->tcq->active_tag != -1)
return ide_dmaq_complete(drive, stat);
/*
* service interrupt
*/
if (stat & SERVICE_STAT) {
TCQ_PRINTK("ide_dmaq_intr: SERV (stat=%x)\n", stat);
return ide_service(drive);
}
printk("ide_dmaq_intr: stat=%x, not expected\n", stat);
return ide_check_service(drive);
}
/*
* configure the drive for tcq
*/
static int ide_tcq_configure(ide_drive_t *drive)
{
struct hd_drive_task_hdr taskfile;
int tcq_supp = 1 << 1 | 1 << 14;
memset(&taskfile, 0, sizeof(taskfile));
/*
* bit 14 and 1 must be set in word 83 of the device id to indicate
* support for dma queued protocol
*/
if ((drive->id->command_set_2 & tcq_supp) != tcq_supp) {
printk("%s: queued feature set not supported\n", drive->name);
return 1;
}
taskfile.feature = SETFEATURES_EN_WCACHE;
taskfile.command = WIN_SETFEATURES;
if (ide_wait_taskfile(drive, &taskfile, NULL, NULL)) {
printk("%s: failed to enable write cache\n", drive->name);
return 1;
}
/*
* disable RELease interrupt, it's quicker to poll this after
* having sent the command opcode
*/
taskfile.feature = SETFEATURES_DIS_RI;
taskfile.command = WIN_SETFEATURES;
if (ide_wait_taskfile(drive, &taskfile, NULL, NULL)) {
printk("%s: disabling release interrupt fail\n", drive->name);
return 1;
}
#ifdef IDE_TCQ_FIDDLE_SI
/*
* enable SERVICE interrupt
*/
taskfile.feature = SETFEATURES_EN_SI;
taskfile.command = WIN_SETFEATURES;
if (ide_wait_taskfile(drive, &taskfile, NULL, NULL)) {
printk("%s: enabling service interrupt fail\n", drive->name);
return 1;
}
#endif
return 0;
}
/*
* for now assume that command list is always as big as we need and don't
* attempt to shrink it on tcq disable
*/
static int ide_enable_queued(ide_drive_t *drive, int on)
{
/*
* disable or adjust queue depth
*/
if (!on) {
printk("%s: TCQ disabled\n", drive->name);
drive->using_tcq = 0;
return 0;
} else if (drive->using_tcq) {
drive->queue_depth = drive->using_tcq;
goto out;
}
if (ide_tcq_configure(drive)) {
drive->using_tcq = 0;
return 1;
}
out:
drive->tcq->max_depth = 0;
printk("%s: tagged command queueing enabled, command queue depth %d\n", drive->name, drive->queue_depth);
drive->using_tcq = 1;
return 0;
}
int ide_tcq_dmaproc(ide_dma_action_t func, ide_drive_t *drive)
{
struct ata_channel *hwif = drive->channel;
unsigned int reading = 0, enable_tcq = 1;
ide_startstop_t startstop;
struct ata_request *ar;
byte stat, feat;
switch (func) {
/*
* invoked from a SERVICE interrupt, command etc already known.
* just need to start the dma engine for this tag
*/
case ide_dma_read_queued:
reading = 1 << 3;
case ide_dma_write_queued:
TCQ_PRINTK("ide_dma: setting up queued %d\n", drive->tcq->active_tag);
BUG_ON(drive->tcq->active_tag == -1);
if (!test_bit(IDE_BUSY, &HWGROUP(drive)->flags))
printk("queued_rw: IDE_BUSY not set\n");
if (ide_wait_stat(&startstop, drive, READY_STAT | DRQ_STAT, BUSY_STAT, WAIT_READY)) {
printk("%s: timeout waiting for data phase\n", drive->name);
return startstop;
}
if (ide_start_dma(hwif, drive, func))
return 1;
ide_tcq_set_intr(HWGROUP(drive), ide_dmaq_intr);
return hwif->dmaproc(ide_dma_begin, drive);
/*
* start a queued command from scratch
*/
case ide_dma_queued_start:
BUG_ON(drive->tcq->active_tag == -1);
ar = IDE_CUR_TAG(drive);
/*
* set nIEN, tag start operation will enable again when
* it is safe
*/
drive_ctl_nien(drive, 1);
OUT_BYTE(AR_TASK_CMD(ar), IDE_COMMAND_REG);
if (ide_tcq_wait_altstat(drive, &stat, BUSY_STAT)) {
printk("ide_dma_queued_start: abort (stat=%x)\n", stat);
return ide_stopped;
}
drive_ctl_nien(drive, 0);
if (stat & ERR_STAT) {
printk("ide_dma_queued_start: abort (stat=%x)\n", stat);
return ide_stopped;
}
if ((feat = GET_FEAT()) & NSEC_REL) {
drive->tcq->immed_rel++;
TCQ_PRINTK("REL in queued_start\n");
IDE_SET_CUR_TAG(drive, -1);
if ((stat = GET_STAT()) & SERVICE_STAT)
return ide_service(drive);
ide_tcq_set_intr(HWGROUP(drive), ide_dmaq_intr);
return ide_released;
}
drive->tcq->immed_comp++;
if (ide_wait_stat(&startstop, drive, READY_STAT | DRQ_STAT, BUSY_STAT, WAIT_READY)) {
printk("%s: timeout waiting for data phase\n", drive->name);
return startstop;
}
if (ide_start_dma(hwif, drive, func))
return ide_stopped;
if (hwif->dmaproc(ide_dma_begin, drive))
return ide_stopped;
/*
* wait for SERVICE or completion interrupt
*/
ide_tcq_set_intr(HWGROUP(drive), ide_dmaq_intr);
return ide_started;
case ide_dma_queued_off:
enable_tcq = 0;
case ide_dma_queued_on:
return ide_enable_queued(drive, enable_tcq);
default:
break;
}
return 1;
}
int ide_build_sglist (struct ata_channel *hwif, struct request *rq);
ide_startstop_t ide_start_tag(ide_dma_action_t func, ide_drive_t *drive,
struct ata_request *ar)
{
/*
* do this now, no need to run that with interrupts disabled
*/
if (!ide_build_sglist(drive->channel, ar->ar_rq))
return ide_stopped;
IDE_SET_CUR_TAG(drive, ar->ar_tag);
return ide_tcq_dmaproc(func, drive);
}
drivers/ide/ide.c
View file @ 17b581c6
......@@ -368,6 +368,25 @@ int drive_is_flashcard (ide_drive_t *drive)
return 0; /* no, it is not a flash memory card */
}
void ide_end_queued_request(ide_drive_t *drive, int uptodate, struct request *rq)
{
unsigned long flags;
BUG_ON(!(rq->flags & REQ_STARTED));
BUG_ON(!rq->special);
if (!end_that_request_first(rq, uptodate, rq->hard_nr_sectors)) {
struct ata_request *ar = rq->special;
add_blkdev_randomness(major(rq->rq_dev));
spin_lock_irqsave(&ide_lock, flags);
ata_ar_put(drive, ar);
end_that_request_last(rq);
spin_unlock_irqrestore(&ide_lock, flags);
}
}
int __ide_end_request(ide_drive_t *drive, int uptodate, int nr_secs)
{
struct request *rq;
......@@ -396,9 +415,17 @@ int __ide_end_request(ide_drive_t *drive, int uptodate, int nr_secs)
}
if (!end_that_request_first(rq, uptodate, nr_secs)) {
struct ata_request *ar = rq->special;
add_blkdev_randomness(major(rq->rq_dev));
/*
* request with ATA_AR_QUEUED set have already been
* dequeued, but doing it twice is ok
*/
blkdev_dequeue_request(rq);
HWGROUP(drive)->rq = NULL;
if (ar)
ata_ar_put(drive, ar);
end_that_request_last(rq);
ret = 0;
}
......@@ -422,8 +449,8 @@ void ide_set_handler (ide_drive_t *drive, ide_handler_t *handler,
spin_lock_irqsave(&ide_lock, flags);
if (hwgroup->handler != NULL) {
printk("%s: ide_set_handler: handler not null; old=%p, new=%p\n",
drive->name, hwgroup->handler, handler);
printk("%s: ide_set_handler: handler not null; old=%p, new=%p, from %p\n",
drive->name, hwgroup->handler, handler, __builtin_return_address(0));
}
hwgroup->handler = handler;
hwgroup->expiry = expiry;
......@@ -738,8 +765,12 @@ void ide_end_drive_cmd(ide_drive_t *drive, byte stat, byte err)
args[6] = IN_BYTE(IDE_SELECT_REG);
}
} else if (rq->flags & REQ_DRIVE_TASKFILE) {
struct ata_taskfile *args = rq->special;
struct ata_request *ar = rq->special;
struct ata_taskfile *args = &ar->ar_task;
rq->errors = !OK_STAT(stat, READY_STAT, BAD_STAT);
if (args && args->taskfile.command == WIN_NOP)
printk(KERN_INFO "%s: NOP completed\n", __FUNCTION__);
if (args) {
args->taskfile.feature = err;
args->taskfile.sector_count = IN_BYTE(IDE_NSECTOR_REG);
......@@ -762,6 +793,8 @@ void ide_end_drive_cmd(ide_drive_t *drive, byte stat, byte err)
args->hobfile.high_cylinder = IN_BYTE(IDE_HCYL_REG);
}
}
if (ar->ar_flags & ATA_AR_RETURN)
ata_ar_put(drive, ar);
}
blkdev_dequeue_request(rq);
......@@ -879,6 +912,11 @@ ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat)
struct request *rq;
byte err;
/*
* FIXME: remember to invalidate tcq queue when drive->using_tcq
* and atomic_read(&drive->tcq->queued) /jens
*/
err = ide_dump_status(drive, msg, stat);
if (drive == NULL || (rq = HWGROUP(drive)->rq) == NULL)
return ide_stopped;
......@@ -1063,7 +1101,11 @@ static ide_startstop_t start_request(ide_drive_t *drive, struct request *rq)
while ((read_timer() - hwif->last_time) < DISK_RECOVERY_TIME);
#endif
if (test_bit(IDE_DMA, &HWGROUP(drive)->flags))
printk("start_request: auch, DMA in progress 1\n");
SELECT_DRIVE(hwif, drive);
if (test_bit(IDE_DMA, &HWGROUP(drive)->flags))
printk("start_request: auch, DMA in progress 2\n");
if (ide_wait_stat(&startstop, drive, drive->ready_stat,
BUSY_STAT|DRQ_STAT, WAIT_READY)) {
printk(KERN_WARNING "%s: drive not ready for command\n", drive->name);
......@@ -1083,11 +1125,14 @@ static ide_startstop_t start_request(ide_drive_t *drive, struct request *rq)
*/
if (rq->flags & REQ_DRIVE_TASKFILE) {
struct ata_taskfile *args = rq->special;
struct ata_request *ar = rq->special;
struct ata_taskfile *args;
if (!(args))
if (!ar)
goto args_error;
args = &ar->ar_task;
ata_taskfile(drive, args, NULL);
if (((args->command_type == IDE_DRIVE_TASK_RAW_WRITE) ||
......@@ -1318,16 +1363,37 @@ static void ide_do_request(ide_hwgroup_t *hwgroup, int masked_irq)
hwgroup->hwif = hwif;
hwgroup->drive = drive;
drive->PADAM_sleep = 0;
queue_next:
drive->PADAM_service_start = jiffies;
if (blk_queue_plugged(&drive->queue))
BUG();
if (test_bit(IDE_DMA, &hwgroup->flags)) {
printk("ide_do_request: DMA in progress...\n");
break;
}
/*
* there's a small window between where the queue could be
* replugged while we are in here when using tcq (in which
* case the queue is probably empty anyways...), so check
* and leave if appropriate. When not using tcq, this is
* still a severe BUG!
*/
if (blk_queue_plugged(&drive->queue)) {
BUG_ON(!drive->using_tcq);
break;
}
/*
* just continuing an interrupted request maybe
*/
rq = hwgroup->rq = elv_next_request(&drive->queue);
if (!rq) {
if (!ide_pending_commands(drive))
clear_bit(IDE_BUSY, &HWGROUP(drive)->flags);
break;
}
/*
* Some systems have trouble with IDE IRQs arriving while
* the driver is still setting things up. So, here we disable
......@@ -1338,14 +1404,22 @@ static void ide_do_request(ide_hwgroup_t *hwgroup, int masked_irq)
*/
if (masked_irq && hwif->irq != masked_irq)
disable_irq_nosync(hwif->irq);
spin_unlock(&ide_lock);
ide__sti(); /* allow other IRQs while we start this request */
startstop = start_request(drive, rq);
spin_lock_irq(&ide_lock);
if (masked_irq && hwif->irq != masked_irq)
enable_irq(hwif->irq);
if (startstop == ide_stopped)
if (startstop == ide_released)
goto queue_next;
else if (startstop == ide_stopped) {
if (test_bit(IDE_DMA, &hwgroup->flags))
printk("2nd illegal clear\n");
clear_bit(IDE_BUSY, &hwgroup->flags);
}
}
}
......@@ -1372,21 +1446,39 @@ void do_ide_request(request_queue_t *q)
* un-busy the hwgroup etc, and clear any pending DMA status. we want to
* retry the current request in PIO mode instead of risking tossing it
* all away
*
* FIXME: needs a bit of tcq work
*/
void ide_dma_timeout_retry(ide_drive_t *drive)
{
struct ata_channel *hwif = drive->channel;
struct request *rq;
struct request *rq = NULL;
struct ata_request *ar = NULL;
if (drive->using_tcq) {
if (drive->tcq->active_tag != -1) {
ar = IDE_CUR_AR(drive);
rq = ar->ar_rq;
}
} else {
rq = HWGROUP(drive)->rq;
ar = rq->special;
}
/*
* end current dma transaction
*/
hwif->dmaproc(ide_dma_end, drive);
if (rq)
hwif->dmaproc(ide_dma_end, drive);
/*
* complain a little, later we might remove some of this verbosity
*/
printk("%s: timeout waiting for DMA\n", drive->name);
printk("%s: timeout waiting for DMA", drive->name);
if (drive->using_tcq)
printk(" queued, active tag %d", drive->tcq->active_tag);
printk("\n");
hwif->dmaproc(ide_dma_timeout, drive);
/*
......@@ -1402,15 +1494,25 @@ void ide_dma_timeout_retry(ide_drive_t *drive)
* un-busy drive etc (hwgroup->busy is cleared on return) and
* make sure request is sane
*/
rq = HWGROUP(drive)->rq;
HWGROUP(drive)->rq = NULL;
if (!rq)
return;
rq->errors = 0;
if (rq->bio) {
rq->sector = rq->bio->bi_sector;
rq->current_nr_sectors = bio_iovec(rq->bio)->bv_len >> 9;
rq->buffer = NULL;
}
/*
* this request was not on the queue any more
*/
if (ar->ar_flags & ATA_AR_QUEUED) {
ata_ar_put(drive, ar);
_elv_add_request(&drive->queue, rq, 0, 0);
}
}
/*
......@@ -1641,8 +1743,10 @@ void ide_intr(int irq, void *dev_id, struct pt_regs *regs)
set_recovery_timer(drive->channel);
drive->PADAM_service_time = jiffies - drive->PADAM_service_start;
if (startstop == ide_stopped) {
if (hwgroup->handler == NULL) { /* paranoia */
if (hwgroup->handler == NULL) { /* paranoia */
clear_bit(IDE_BUSY, &hwgroup->flags);
if (test_bit(IDE_DMA, &hwgroup->flags))
printk("ide_intr: illegal clear\n");
ide_do_request(hwgroup, hwif->irq);
} else {
printk("%s: ide_intr: huh? expected NULL handler on exit\n", drive->name);
......@@ -1722,6 +1826,7 @@ int ide_do_drive_cmd(ide_drive_t *drive, struct request *rq, ide_action_t action
if (drive->channel->chipset == ide_pdc4030 && rq->buffer != NULL)
return -ENOSYS; /* special drive cmds not supported */
#endif
rq->flags |= REQ_STARTED;
rq->errors = 0;
rq->rq_status = RQ_ACTIVE;
rq->rq_dev = mk_kdev(major,(drive->select.b.unit)<<PARTN_BITS);
......@@ -2045,6 +2150,7 @@ void ide_unregister(struct ata_channel *channel)
}
drive->present = 0;
blk_cleanup_queue(&drive->queue);
ide_teardown_commandlist(drive);
}
if (d->present)
hwgroup->drive = d;
......@@ -2595,6 +2701,89 @@ static int ide_ioctl (struct inode *inode, struct file *file,
}
}
void ide_teardown_commandlist(ide_drive_t *drive)
{
struct pci_dev *pdev= drive->channel->pci_dev;
struct list_head *entry;
list_for_each(entry, &drive->free_req) {
struct ata_request *ar = list_ata_entry(entry);
list_del(&ar->ar_queue);
kfree(ar->ar_sg_table);
pci_free_consistent(pdev, PRD_SEGMENTS * PRD_BYTES, ar->ar_dmatable_cpu, ar->ar_dmatable);
kfree(ar);
}
}
int ide_build_commandlist(ide_drive_t *drive)
{
struct pci_dev *pdev= drive->channel->pci_dev;
struct ata_request *ar;
ide_tag_info_t *tcq;
int i, err;
tcq = kmalloc(sizeof(ide_tag_info_t), GFP_ATOMIC);
if (!tcq)
return -ENOMEM;
drive->tcq = tcq;
memset(drive->tcq, 0, sizeof(ide_tag_info_t));
INIT_LIST_HEAD(&drive->free_req);
drive->using_tcq = 0;
err = -ENOMEM;
for (i = 0; i < drive->queue_depth; i++) {
/* Having kzmalloc would help reduce code size at quite
* many places in kernel. */
ar = kmalloc(sizeof(*ar), GFP_ATOMIC);
if (!ar)
break;
memset(ar, 0, sizeof(*ar));
INIT_LIST_HEAD(&ar->ar_queue);
ar->ar_sg_table = kmalloc(PRD_SEGMENTS * sizeof(struct scatterlist), GFP_ATOMIC);
if (!ar->ar_sg_table) {
kfree(ar);
break;
}
ar->ar_dmatable_cpu = pci_alloc_consistent(pdev, PRD_SEGMENTS * PRD_BYTES, &ar->ar_dmatable);
if (!ar->ar_dmatable_cpu) {
kfree(ar->ar_sg_table);
kfree(ar);
break;
}
/*
* pheew, all done, add to list
*/
list_add_tail(&ar->ar_queue, &drive->free_req);
}
if (i) {
drive->queue_depth = i;
if (i >= 1) {
drive->using_tcq = 1;
drive->tcq->queued = 0;
drive->tcq->active_tag = -1;
return 0;
}
kfree(drive->tcq);
drive->tcq = NULL;
err = 0;
}
kfree(drive->tcq);
drive->tcq = NULL;
return err;
}
static int ide_check_media_change (kdev_t i_rdev)
{
ide_drive_t *drive;
......@@ -3156,6 +3345,9 @@ int ide_register_subdriver(ide_drive_t *drive, struct ata_operations *driver)
drive->channel->dmaproc(ide_dma_off_quietly, drive);
drive->channel->dmaproc(ide_dma_check, drive);
#ifdef CONFIG_BLK_DEV_IDE_TCQ_DEFAULT
drive->channel->dmaproc(ide_dma_queued_on, drive);
#endif /* CONFIG_BLK_DEV_IDE_TCQ_DEFAULT */
}
/* Only CD-ROMs and tape drives support DSC overlap. */
drive->dsc_overlap = (drive->next != drive
......
drivers/ide/pdc202xx.c
View file @ 17b581c6
......@@ -1057,6 +1057,12 @@ int pdc202xx_dmaproc (ide_dma_action_t func, ide_drive_t *drive)
case ide_dma_timeout:
if (drive->channel->resetproc != NULL)
drive->channel->resetproc(drive);
/*
* we cannot support queued operations on promise, so fail to
* to enable it...
*/
case ide_dma_queued_on:
return 1;
default:
break;
}
......
include/linux/hdreg.h
View file @ 17b581c6
......@@ -34,6 +34,7 @@
#define ECC_STAT 0x04 /* Corrected error */
#define DRQ_STAT 0x08
#define SEEK_STAT 0x10
#define SERVICE_STAT SEEK_STAT
#define WRERR_STAT 0x20
#define READY_STAT 0x40
#define BUSY_STAT 0x80
......@@ -49,6 +50,13 @@
#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */
#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */
/*
* bits of NSECTOR reg
*/
#define NSEC_CD 0x1
#define NSEC_IO 0x2
#define NSEC_REL 0x4
/*
* Command Header sizes for IOCTL commands
* HDIO_DRIVE_CMD and HDIO_DRIVE_TASK
......
include/linux/ide.h
View file @ 17b581c6
......@@ -114,10 +114,13 @@ typedef unsigned char byte; /* used everywhere */
#define GET_STAT() IN_BYTE(IDE_STATUS_REG)
#define GET_ALTSTAT() IN_BYTE(IDE_CONTROL_REG)
#define GET_FEAT() IN_BYTE(IDE_NSECTOR_REG)
#define OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good))
#define BAD_R_STAT (BUSY_STAT | ERR_STAT)
#define BAD_W_STAT (BAD_R_STAT | WRERR_STAT)
#define BAD_STAT (BAD_R_STAT | DRQ_STAT)
#define DRIVE_READY (READY_STAT | SEEK_STAT)
#define DATA_READY (DRQ_STAT)
......@@ -270,6 +273,37 @@ typedef union {
} b;
} special_t;
#define IDE_MAX_TAG 32 /* spec says 32 max */
struct ata_request;
typedef struct ide_tag_info_s {
unsigned long tag_mask; /* next tag bit mask */
struct ata_request *ar[IDE_MAX_TAG]; /* in-progress requests */
int active_tag; /* current active tag */
int queued; /* current depth */
/*
* stats ->
*/
int max_depth; /* max depth ever */
int max_last_depth; /* max since last check */
/*
* Either the command completed immediately after being started
* (immed_comp), or the device did a bus release before dma was
* started (immed_rel).
*/
int immed_rel;
int immed_comp;
} ide_tag_info_t;
#define IDE_GET_AR(drive, tag) ((drive)->tcq->ar[(tag)])
#define IDE_CUR_TAG(drive) (IDE_GET_AR((drive), (drive)->tcq->active_tag))
#define IDE_SET_CUR_TAG(drive, tag) ((drive)->tcq->active_tag = (tag))
#define IDE_CUR_AR(drive) \
((drive)->using_tcq ? IDE_CUR_TAG((drive)) : HWGROUP((drive))->rq->special)
struct ide_settings_s;
typedef struct ide_drive_s {
......@@ -284,6 +318,8 @@ typedef struct ide_drive_s {
*/
request_queue_t queue; /* per device request queue */
struct list_head free_req; /* free ata requests */
struct ide_drive_s *next; /* circular list of hwgroup drives */
/* Those are directly injected jiffie values. They should go away and
......@@ -298,6 +334,7 @@ typedef struct ide_drive_s {
special_t special; /* special action flags */
byte keep_settings; /* restore settings after drive reset */
byte using_dma; /* disk is using dma for read/write */
byte using_tcq; /* disk is using queued dma operations*/
byte retry_pio; /* retrying dma capable host in pio */
byte state; /* retry state */
byte unmask; /* flag: okay to unmask other irqs */
......@@ -349,7 +386,7 @@ typedef struct ide_drive_s {
struct hd_driveid *id; /* drive model identification info */
struct hd_struct *part; /* drive partition table */
char name[4]; /* drive name, such as "hda" */
char name[6]; /* drive name, such as "hda" */
struct ata_operations *driver;
void *driver_data; /* extra driver data */
......@@ -373,6 +410,8 @@ typedef struct ide_drive_s {
unsigned int failures; /* current failure count */
unsigned int max_failures; /* maximum allowed failure count */
struct device device; /* global device tree handle */
unsigned int queue_depth;
ide_tag_info_t *tcq;
} ide_drive_t;
/*
......@@ -391,7 +430,10 @@ typedef enum { ide_dma_read, ide_dma_write, ide_dma_begin,
ide_dma_off, ide_dma_off_quietly, ide_dma_test_irq,
ide_dma_bad_drive, ide_dma_good_drive,
ide_dma_verbose, ide_dma_retune,
ide_dma_lostirq, ide_dma_timeout
ide_dma_lostirq, ide_dma_timeout,
ide_dma_read_queued, ide_dma_write_queued,
ide_dma_queued_start, ide_dma_queued_on,
ide_dma_queued_off,
} ide_dma_action_t;
typedef int (ide_dmaproc_t)(ide_dma_action_t, ide_drive_t *);
......@@ -466,11 +508,6 @@ struct ata_channel {
ide_rw_proc_t *rwproc; /* adjust timing based upon rq->cmd direction */
ide_ideproc_t *ideproc; /* CPU-polled transfer routine */
ide_dmaproc_t *dmaproc; /* dma read/write/abort routine */
unsigned int *dmatable_cpu; /* dma physical region descriptor table (cpu view) */
dma_addr_t dmatable_dma; /* dma physical region descriptor table (dma view) */
struct scatterlist *sg_table; /* Scatter-gather list used to build the above */
int sg_nents; /* Current number of entries in it */
int sg_dma_direction; /* dma transfer direction */
unsigned long dma_base; /* base addr for dma ports */
unsigned dma_extra; /* extra addr for dma ports */
unsigned long config_data; /* for use by chipset-specific code */
......@@ -530,21 +567,19 @@ typedef int (ide_expiry_t)(ide_drive_t *);
#define IDE_DMA 2 /* DMA in progress */
typedef struct hwgroup_s {
ide_handler_t *handler;/* irq handler, if active */
unsigned long flags; /* BUSY, SLEEPING */
ide_drive_t *drive; /* current drive */
struct ata_channel *hwif; /* ptr to current hwif in linked-list */
ide_handler_t *handler; /* irq handler, if active */
unsigned long flags; /* BUSY, SLEEPING */
ide_drive_t *drive; /* current drive */
struct ata_channel *hwif; /* ptr to current hwif in linked-list */
struct request *rq; /* current request */
struct request *rq; /* current request */
struct timer_list timer; /* failsafe timer */
struct request wrq; /* local copy of current write rq */
struct timer_list timer; /* failsafe timer */
struct request wrq; /* local copy of current write rq */
unsigned long poll_timeout; /* timeout value during long polls */
ide_expiry_t *expiry; /* queried upon timeouts */
} ide_hwgroup_t;
/* structure attached to the request for IDE_TASK_CMDS */
/*
* configurable drive settings
*/
......@@ -617,7 +652,7 @@ read_proc_t proc_ide_read_geometry;
return len; \
}
#else
#define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0;
# define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0;
#endif
/*
......@@ -681,6 +716,7 @@ extern int noautodma;
extern int __ide_end_request(ide_drive_t *drive, int uptodate, int nr_secs);
extern int ide_end_request(ide_drive_t *drive, int uptodate);
extern void ide_end_queued_request(ide_drive_t *drive, int, struct request *);
/*
* This is used on exit from the driver, to designate the next irq handler
......@@ -703,7 +739,7 @@ ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat);
* Issue a simple drive command
* The drive must be selected beforehand.
*/
void ide_cmd (ide_drive_t *drive, byte cmd, byte nsect, ide_handler_t *handler);
void ide_cmd(ide_drive_t *drive, byte cmd, byte nsect, ide_handler_t *handler);
/*
* ide_fixstring() cleans up and (optionally) byte-swaps a text string,
......@@ -711,7 +747,7 @@ void ide_cmd (ide_drive_t *drive, byte cmd, byte nsect, ide_handler_t *handler);
* It is primarily used to tidy up the model name/number fields as
* returned by the WIN_[P]IDENTIFY commands.
*/
void ide_fixstring (byte *s, const int bytecount, const int byteswap);
void ide_fixstring(byte *s, const int bytecount, const int byteswap);
/*
* This routine busy-waits for the drive status to be not "busy".
......@@ -721,31 +757,32 @@ void ide_fixstring (byte *s, const int bytecount, const int byteswap);
* caller should return the updated value of "startstop" in this case.
* "startstop" is unchanged when the function returns 0;
*/
int ide_wait_stat (ide_startstop_t *startstop, ide_drive_t *drive, byte good, byte bad, unsigned long timeout);
int ide_wait_stat(ide_startstop_t *startstop, ide_drive_t *drive, byte good, byte bad, unsigned long timeout);
int ide_wait_noerr (ide_drive_t *drive, byte good, byte bad, unsigned long timeout);
int ide_wait_noerr(ide_drive_t *drive, byte good, byte bad, unsigned long timeout);
/*
* This routine is called from the partition-table code in genhd.c
* to "convert" a drive to a logical geometry with fewer than 1024 cyls.
*/
int ide_xlate_1024 (kdev_t, int, int, const char *);
int ide_xlate_1024(kdev_t, int, int, const char *);
/*
* Convert kdev_t structure into ide_drive_t * one.
*/
ide_drive_t *get_info_ptr (kdev_t i_rdev);
ide_drive_t *get_info_ptr(kdev_t i_rdev);
/*
* Re-Start an operation for an IDE interface.
* The caller should return immediately after invoking this.
*/
ide_startstop_t restart_request (ide_drive_t *);
ide_startstop_t restart_request(ide_drive_t *);
/*
* This function is intended to be used prior to invoking ide_do_drive_cmd().
*/
extern void ide_init_drive_cmd (struct request *rq);
extern void ide_init_drive_cmd(struct request *rq);
extern void init_taskfile_request(struct request *rq);
/*
* "action" parameter type for ide_do_drive_cmd() below.
......@@ -775,8 +812,33 @@ struct ata_taskfile {
int command_type;
ide_pre_handler_t *prehandler;
ide_handler_t *handler;
struct ata_request *ar;
};
/*
* Merge this with the above struct soon.
*/
struct ata_request {
struct request *ar_rq; /* real request */
struct ide_drive_s *ar_drive; /* associated drive */
unsigned long ar_flags; /* ATA_AR_* flags */
int ar_tag; /* tag number, if any */
struct list_head ar_queue; /* pending list */
struct ata_taskfile ar_task; /* associated taskfile */
unsigned long ar_time;
/* DMA stuff, PCI layer */
struct scatterlist *ar_sg_table;
int ar_sg_nents;
int ar_sg_ddir;
/* CPU related DMA stuff */
unsigned int *ar_dmatable_cpu;
dma_addr_t ar_dmatable;
};
#define AR_TASK_CMD(ar) ((ar)->ar_task.taskfile.command)
void ata_input_data (ide_drive_t *drive, void *buffer, unsigned int wcount);
void ata_output_data (ide_drive_t *drive, void *buffer, unsigned int wcount);
void atapi_input_bytes (ide_drive_t *drive, void *buffer, unsigned int bytecount);
......@@ -879,22 +941,24 @@ extern int ide_register_subdriver(ide_drive_t *drive, struct ata_operations *dri
extern int ide_unregister_subdriver(ide_drive_t *drive);
#ifdef CONFIG_BLK_DEV_IDEPCI
#define ON_BOARD 1
#define NEVER_BOARD 0
#ifdef CONFIG_BLK_DEV_OFFBOARD
# define OFF_BOARD ON_BOARD
#else
# define OFF_BOARD NEVER_BOARD
#endif
void __init ide_scan_pcibus(int scan_direction);
# define ON_BOARD 1
# define NEVER_BOARD 0
# ifdef CONFIG_BLK_DEV_OFFBOARD
# define OFF_BOARD ON_BOARD
# else
# define OFF_BOARD NEVER_BOARD
# endif
/* FIXME: This should go away possible. */
extern void __init ide_scan_pcibus(int scan_direction);
#endif
#ifdef CONFIG_BLK_DEV_IDEDMA
int ide_build_dmatable (ide_drive_t *drive, ide_dma_action_t func);
void ide_destroy_dmatable (ide_drive_t *drive);
ide_startstop_t ide_dma_intr (ide_drive_t *drive);
int check_drive_lists (ide_drive_t *drive, int good_bad);
int ide_dmaproc (ide_dma_action_t func, ide_drive_t *drive);
extern int ide_build_dmatable(ide_drive_t *drive, struct request *rq, ide_dma_action_t func);
extern void ide_destroy_dmatable(ide_drive_t *drive);
extern int ide_start_dma(struct ata_channel *, ide_drive_t *, ide_dma_action_t);
extern ide_startstop_t ide_dma_intr(ide_drive_t *drive);
extern int check_drive_lists(ide_drive_t *drive, int good_bad);
extern int ide_dmaproc(ide_dma_action_t func, ide_drive_t *drive);
extern void ide_release_dma(struct ata_channel *hwif);
extern void ide_setup_dma(struct ata_channel *hwif,
unsigned long dmabase, unsigned int num_ports) __init;
......@@ -907,4 +971,88 @@ extern spinlock_t ide_lock;
extern int drive_is_ready(ide_drive_t *drive);
extern void revalidate_drives(void);
#endif /* _IDE_H */
/*
* Tagged Command Queueing:
*/
/*
* ata_request flag bits
*/
#define ATA_AR_QUEUED 1
#define ATA_AR_SETUP 2
#define ATA_AR_RETURN 4
#define list_ata_entry(entry) list_entry((entry), struct ata_request, ar_queue)
static inline void ata_ar_init(ide_drive_t *drive, struct ata_request *ar)
{
ar->ar_rq = NULL;
ar->ar_drive = drive;
ar->ar_flags = 0;
ar->ar_tag = 0;
memset(&ar->ar_task, 0, sizeof(ar->ar_task));
ar->ar_sg_nents = 0;
ar->ar_sg_ddir = 0;
}
/*
* Return a free command, automatically add it to busy list.
*/
static inline struct ata_request *ata_ar_get(ide_drive_t *drive)
{
struct ata_request *ar = NULL;
if (drive->tcq && drive->tcq->queued >= drive->queue_depth)
return NULL;
if (!list_empty(&drive->free_req)) {
ar = list_ata_entry(drive->free_req.next);
list_del(&ar->ar_queue);
ata_ar_init(drive, ar);
}
return ar;
}
static inline void ata_ar_put(ide_drive_t *drive, struct ata_request *ar)
{
list_add(&ar->ar_queue, &drive->free_req);
if (ar->ar_flags & ATA_AR_QUEUED) {
/* clear the tag */
drive->tcq->ar[ar->ar_tag] = NULL;
__clear_bit(ar->ar_tag, &drive->tcq->tag_mask);
drive->tcq->queued--;
}
ar->ar_rq = NULL;
}
extern inline int ide_get_tag(ide_drive_t *drive)
{
int tag = ffz(drive->tcq->tag_mask);
BUG_ON(drive->tcq->tag_mask == 0xffffffff);
__set_bit(tag, &drive->tcq->tag_mask);
if (tag + 1 > drive->tcq->max_depth)
drive->tcq->max_depth = tag + 1;
if (tag + 1 > drive->tcq->max_last_depth)
drive->tcq->max_last_depth = tag + 1;
return tag;
}
#ifdef CONFIG_BLK_DEV_IDE_TCQ
# define ide_pending_commands(drive) ((drive)->using_tcq && (drive)->tcq->queued)
#else
# define ide_pending_commands(drive) 0
#endif
int ide_build_commandlist(ide_drive_t *);
void ide_teardown_commandlist(ide_drive_t *);
int ide_tcq_dmaproc(ide_dma_action_t, ide_drive_t *);
ide_startstop_t ide_start_tag(ide_dma_action_t, ide_drive_t *, struct ata_request *);
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7