Merge branch 'for-rmk' of...

Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel

MAINTAINERS

@@ -653,6 +653,8 @@ M:	laforge@openezx.org
 L:	openezx-devel@lists.openezx.org (subscribers-only)
 W:	http://www.openezx.org/
 S:	Maintained
+T:	topgit git://git.openezx.org/openezx.git
+F:	arch/arm/mach-pxa/ezx.c
 
 ARM/FARADAY FA526 PORT
 P:	Paulius Zaleckas
@@ -774,6 +776,13 @@ P:	Philipp Zabel
 M:	philipp.zabel@gmail.com
 S:	Maintained
 
+ARM/MIOA701 MACHINE SUPPORT
+P:	Robert Jarzmik
+M:	robert.jarzmik@free.fr
+L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+F:	arch/arm/mach-pxa/mioa701.c
+S:	Maintained
+
 ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
 P:	Michael Petchkovsky
 M:	mkpetch@internode.on.net
@@ -792,6 +801,12 @@ M:	marek.vasut@gmail.com
 W:	http://hackndev.com
 S:	Maintained
 
+ARM/PALM TREO 680 SUPPORT
+P:	Tomas Cech
+M:	sleep_walker@suse.cz
+W:	http://hackndev.com
+S:	Maintained
+
 ARM/PALMZ72 SUPPORT
 P:	Sergey Lapin
 M:	slapin@ossfans.org

arch/arm/mach-pxa/Kconfig

@@ -401,6 +401,16 @@ config MACH_PALMZ72
 	  Say Y here if you intend to run this kernel on Palm Zire 72
 	  handheld computer.
 
+config MACH_TREO680
+	bool "Palm Treo 680"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on Palm Treo 680
+	  smartphone.
+
 config MACH_PALMLD
 	bool "Palm LifeDrive"
 	default y

arch/arm/mach-pxa/Makefile

@@ -62,6 +62,7 @@ obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
 obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
 obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
 obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
+obj-$(CONFIG_MACH_TREO680)	+= treo680.o
 obj-$(CONFIG_ARCH_VIPER)	+= viper.o
 
 ifeq ($(CONFIG_MACH_ZYLONITE),y)

arch/arm/mach-pxa/corgi.c

@@ -23,6 +23,7 @@
 #include <linux/pm.h>
 #include <linux/gpio.h>
 #include <linux/backlight.h>
+#include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -600,6 +601,10 @@ static struct platform_device *devices[] __initdata = {
 	&sharpsl_rom_device,
 };
 
+static struct i2c_board_info __initdata corgi_i2c_devices[] = {
+	{ I2C_BOARD_INFO("wm8731", 0x1b) },
+};
+
 static void corgi_poweroff(void)
 {
 	if (!machine_is_corgi())
@@ -634,6 +639,7 @@ static void __init corgi_init(void)
 	pxa_set_mci_info(&corgi_mci_platform_data);
 	pxa_set_ficp_info(&corgi_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(corgi_i2c_devices));
 
 	platform_scoop_config = &corgi_pcmcia_config;
 

arch/arm/mach-pxa/em-x270.c

@@ -30,6 +30,7 @@
 #include <linux/apm-emulation.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
+#include <linux/regulator/userspace-consumer.h>
 
 #include <media/soc_camera.h>
 
@@ -735,6 +736,7 @@ static struct pxa2xx_spi_chip em_x270_libertas_chip = {
 	.rx_threshold	= 1,
 	.tx_threshold	= 1,
 	.timeout	= 1000,
+	.gpio_cs	= 14,
 };
 
 static unsigned long em_x270_libertas_pin_config[] = {
@@ -803,7 +805,6 @@ static int em_x270_libertas_teardown(struct spi_device *spi)
 
 struct libertas_spi_platform_data em_x270_libertas_pdata = {
 	.use_dummy_writes	= 1,
-	.gpio_cs		= 14,
 	.setup			= em_x270_libertas_setup,
 	.teardown		= em_x270_libertas_teardown,
 };
@@ -838,10 +839,14 @@ static void __init em_x270_init_spi(void)
 static inline void em_x270_init_spi(void) {}
 #endif
 
-#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
+static pxa2xx_audio_ops_t em_x270_ac97_info = {
+	.reset_gpio = 113,
+};
+
 static void __init em_x270_init_ac97(void)
 {
-	pxa_set_ac97_info(NULL);
+	pxa_set_ac97_info(&em_x270_ac97_info);
 }
 #else
 static inline void em_x270_init_ac97(void) {}
@@ -1038,6 +1043,52 @@ static void  __init em_x270_init_camera(void)
 static inline void em_x270_init_camera(void) {}
 #endif
 
+static struct regulator_bulk_data em_x270_gps_consumer_supply = {
+	.supply		= "vcc gps",
+};
+
+static struct regulator_userspace_consumer_data em_x270_gps_consumer_data = {
+	.name		= "vcc gps",
+	.num_supplies	= 1,
+	.supplies	= &em_x270_gps_consumer_supply,
+};
+
+static struct platform_device em_x270_gps_userspace_consumer = {
+	.name		= "reg-userspace-consumer",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &em_x270_gps_consumer_data,
+	},
+};
+
+static struct regulator_bulk_data em_x270_gprs_consumer_supply = {
+	.supply		= "vcc gprs",
+};
+
+static struct regulator_userspace_consumer_data em_x270_gprs_consumer_data = {
+	.name		= "vcc gprs",
+	.num_supplies	= 1,
+	.supplies	= &em_x270_gprs_consumer_supply
+};
+
+static struct platform_device em_x270_gprs_userspace_consumer = {
+	.name		= "reg-userspace-consumer",
+	.id		= 1,
+	.dev		= {
+		.platform_data = &em_x270_gprs_consumer_data,
+	}
+};
+
+static struct platform_device *em_x270_userspace_consumers[] = {
+	&em_x270_gps_userspace_consumer,
+	&em_x270_gprs_userspace_consumer,
+};
+
+static void __init em_x270_userspace_consumers_init(void)
+{
+	platform_add_devices(ARRAY_AND_SIZE(em_x270_userspace_consumers));
+}
+
 /* DA9030 related initializations */
 #define REGULATOR_CONSUMER(_name, _dev, _supply)			       \
 	static struct regulator_consumer_supply _name##_consumers[] = {	\
@@ -1047,11 +1098,11 @@ static inline void em_x270_init_camera(void) {}
 		},							\
 	}
 
-REGULATOR_CONSUMER(ldo3, NULL, "vcc gps");
+REGULATOR_CONSUMER(ldo3, &em_x270_gps_userspace_consumer.dev, "vcc gps");
 REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
 REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio");
 REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
-REGULATOR_CONSUMER(ldo19, NULL, "vcc gprs");
+REGULATOR_CONSUMER(ldo19, &em_x270_gprs_userspace_consumer.dev, "vcc gprs");
 
 #define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask)		\
 	static struct regulator_init_data _ldo##_data = {		\
@@ -1062,6 +1113,7 @@ REGULATOR_CONSUMER(ldo19, NULL, "vcc gprs");
 				.enabled = 0,				\
 			},						\
 			.valid_ops_mask = _ops_mask,			\
+			.apply_uV = 1,					\
 		},							\
 		.num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers),	\
 		.consumer_supplies = _ldo##_consumers,			\
@@ -1240,6 +1292,7 @@ static void __init em_x270_init(void)
 	em_x270_init_spi();
 	em_x270_init_i2c();
 	em_x270_init_camera();
+	em_x270_userspace_consumers_init();
 }
 
 MACHINE_START(EM_X270, "Compulab EM-X270")

arch/arm/mach-pxa/hx4700.c

@@ -30,6 +30,7 @@
 #include <linux/pwm_backlight.h>
 #include <linux/regulator/bq24022.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/max1586.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/gpio_vbus.h>
@@ -774,6 +775,45 @@ static struct platform_device strataflash = {
 	},
 };
 
+/*
+ * Maxim MAX1587A on PI2C
+ */
+
+static struct regulator_consumer_supply max1587a_consumer = {
+	.supply = "vcc_core",
+};
+
+static struct regulator_init_data max1587a_v3_info = {
+	.constraints = {
+		.name = "vcc_core range",
+		.min_uV =  900000,
+		.max_uV = 1705000,
+		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies = 1,
+	.consumer_supplies     = &max1587a_consumer,
+};
+
+static struct max1586_subdev_data max1587a_subdev = {
+	.name = "vcc_core",
+	.id   = MAX1586_V3,
+	.platform_data = &max1587a_v3_info,
+};
+
+static struct max1586_platform_data max1587a_info = {
+	.num_subdevs = 1,
+	.subdevs     = &max1587a_subdev,
+	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
+};
+
+static struct i2c_board_info __initdata pi2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("max1586", 0x14),
+		.platform_data = &max1587a_info,
+	},
+};
+
 /*
  * PCMCIA
  */
@@ -828,6 +868,7 @@ static void __init hx4700_init(void)
 	pxa_set_ficp_info(&ficp_info);
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
 	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
 	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
 

arch/arm/mach-pxa/include/mach/palmz72.h

@@ -31,8 +31,7 @@
 
 /* USB */
 #define GPIO_NR_PALMZ72_USB_DETECT_N		15
-#define GPIO_NR_PALMZ72_USB_POWER		95
-#define GPIO_NR_PALMZ72_USB_PULLUP		12
+#define GPIO_NR_PALMZ72_USB_PULLUP		95
 
 /* LCD/Backlight */
 #define GPIO_NR_PALMZ72_BL_POWER		20

arch/arm/mach-pxa/include/mach/treo680.h

+/*
+ * GPIOs and interrupts for Palm Treo 680 smartphone
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_TREO680_H_
+#define _INCLUDE_TREO680_H_
+
+/* GPIOs */
+#define GPIO_NR_TREO680_POWER_DETECT	0
+#define GPIO_NR_TREO680_AMP_EN		27
+#define GPIO_NR_TREO680_KEYB_BL		24
+#define GPIO_NR_TREO680_VIBRATE_EN	44
+#define GPIO_NR_TREO680_GREEN_LED	20
+#define GPIO_NR_TREO680_RED_LED		79
+#define GPIO_NR_TREO680_SD_DETECT_N	113
+#define GPIO_NR_TREO680_SD_READONLY	33
+#define GPIO_NR_TREO680_EP_DETECT_N	116
+#define GPIO_NR_TREO680_SD_POWER	42
+#define GPIO_NR_TREO680_USB_DETECT	1
+#define GPIO_NR_TREO680_USB_PULLUP	114
+#define GPIO_NR_TREO680_GSM_POWER	40
+#define GPIO_NR_TREO680_GSM_RESET	87
+#define GPIO_NR_TREO680_GSM_WAKE	57
+#define GPIO_NR_TREO680_GSM_HOST_WAKE	14
+#define GPIO_NR_TREO680_GSM_TRIGGER	10
+#define GPIO_NR_TREO680_BT_EN		43
+#define GPIO_NR_TREO680_IR_EN		115
+#define GPIO_NR_TREO680_IR_TXD		47
+#define GPIO_NR_TREO680_BL_POWER	38
+#define GPIO_NR_TREO680_LCD_POWER	25
+
+/* Various addresses  */
+#define TREO680_PHYS_RAM_START	0xa0000000
+#define TREO680_PHYS_IO_START	0x40000000
+#define TREO680_STR_BASE	0xa2000000
+
+/* BACKLIGHT */
+#define TREO680_MAX_INTENSITY		254
+#define TREO680_DEFAULT_INTENSITY	160
+#define TREO680_LIMIT_MASK		0x7F
+#define TREO680_PRESCALER		63
+#define TREO680_PERIOD_NS		3500
+
+#endif

arch/arm/mach-pxa/mioa701.c

@@ -37,6 +37,7 @@
 #include <linux/wm97xx_batt.h>
 #include <linux/mtd/physmap.h>
 #include <linux/usb/gpio_vbus.h>
+#include <linux/regulator/max1586.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -716,6 +717,38 @@ static struct wm97xx_batt_info mioa701_battery_data = {
 	.batt_name	= "mioa701_battery",
 };
 
+/*
+ * Voltage regulation
+ */
+static struct regulator_consumer_supply max1586_consumers[] = {
+	{
+		.supply = "vcc_core",
+	}
+};
+
+static struct regulator_init_data max1586_v3_info = {
+	.constraints = {
+		.name = "vcc_core range",
+		.min_uV = 1000000,
+		.max_uV = 1705000,
+		.always_on = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(max1586_consumers),
+	.consumer_supplies = max1586_consumers,
+};
+
+static struct max1586_subdev_data max1586_subdevs[] = {
+	{ .name = "vcc_core", .id = MAX1586_V3,
+	  .platform_data = &max1586_v3_info },
+};
+
+static struct max1586_platform_data max1586_info = {
+	.subdevs = max1586_subdevs,
+	.num_subdevs = ARRAY_SIZE(max1586_subdevs),
+	.v3_gain = MAX1586_GAIN_NO_R24, /* 700..1475 mV */
+};
+
 /*
  * Camera interface
  */
@@ -725,6 +758,13 @@ struct pxacamera_platform_data mioa701_pxacamera_platform_data = {
 	.mclk_10khz = 5000,
 };
 
+static struct i2c_board_info __initdata mioa701_pi2c_devices[] = {
+	{
+		I2C_BOARD_INFO("max1586", 0x14),
+		.platform_data = &max1586_info,
+	},
+};
+
 static struct soc_camera_link iclink = {
 	.bus_id	= 0, /* Must match id in pxa27x_device_camera in device.c */
 };
@@ -825,7 +865,9 @@ static void __init mioa701_machine_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	gsm_init();
 
+	i2c_register_board_info(1, ARRAY_AND_SIZE(mioa701_pi2c_devices));
 	pxa_set_i2c_info(&i2c_pdata);
+	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_camera_info(&mioa701_pxacamera_platform_data);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices));
 }

arch/arm/mach-pxa/palmz72.c

@@ -27,7 +27,9 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -41,6 +43,8 @@
 #include <mach/irda.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/udc.h>
+#include <mach/palmasoc.h>
+
 #include <mach/pm.h>
 
 #include "generic.h"
@@ -66,6 +70,8 @@ static unsigned long palmz72_pin_config[] __initdata = {
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+	GPIO89_AC97_SYSCLK,
+	GPIO113_AC97_nRESET,
 
 	/* IrDA */
 	GPIO49_GPIO,	/* ir disable */
@@ -77,8 +83,7 @@ static unsigned long palmz72_pin_config[] __initdata = {
 
 	/* USB */
 	GPIO15_GPIO,	/* usb detect */
-	GPIO12_GPIO,	/* usb pullup */
-	GPIO95_GPIO,	/* usb power */
+	GPIO95_GPIO,	/* usb pullup */
 
 	/* Matrix keypad */
 	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
@@ -354,6 +359,22 @@ static struct platform_device palmz72_leds = {
 	}
 };
 
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct gpio_vbus_mach_info palmz72_udc_info = {
+	.gpio_vbus		= GPIO_NR_PALMZ72_USB_DETECT_N,
+	.gpio_pullup		= GPIO_NR_PALMZ72_USB_PULLUP,
+};
+
+static struct platform_device palmz72_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmz72_udc_info,
+	},
+};
+
 /******************************************************************************
  * Power supply
  ******************************************************************************/
@@ -421,6 +442,31 @@ static struct platform_device power_supply = {
 	},
 };
 
+/******************************************************************************
+ * WM97xx battery
+ ******************************************************************************/
+static struct wm97xx_batt_info wm97xx_batt_pdata = {
+	.batt_aux	= WM97XX_AUX_ID3,
+	.temp_aux	= WM97XX_AUX_ID2,
+	.charge_gpio	= -1,
+	.max_voltage	= PALMZ72_BAT_MAX_VOLTAGE,
+	.min_voltage	= PALMZ72_BAT_MIN_VOLTAGE,
+	.batt_mult	= 1000,
+	.batt_div	= 414,
+	.temp_mult	= 1,
+	.temp_div	= 1,
+	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
+	.batt_name	= "main-batt",
+};
+
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct platform_device palmz72_asoc = {
+	.name = "palm27x-asoc",
+	.id   = -1,
+};
+
 /******************************************************************************
  * Framebuffer
  ******************************************************************************/
@@ -527,17 +573,32 @@ device_initcall(palmz72_pm_init);
 static struct platform_device *devices[] __initdata = {
 	&palmz72_backlight,
 	&palmz72_leds,
+	&palmz72_asoc,
 	&power_supply,
+	&palmz72_gpio_vbus,
 };
 
+/* setup udc GPIOs initial state */
+static void __init palmz72_udc_init(void)
+{
+	if (!gpio_request(GPIO_NR_PALMZ72_USB_PULLUP, "USB Pullup")) {
+		gpio_direction_output(GPIO_NR_PALMZ72_USB_PULLUP, 0);
+		gpio_free(GPIO_NR_PALMZ72_USB_PULLUP);
+	}
+}
+
 static void __init palmz72_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
+
 	set_pxa_fb_info(&palmz72_lcd_screen);
 	pxa_set_mci_info(&palmz72_mci_platform_data);
+	palmz72_udc_init();
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&palmz72_ficp_platform_data);
 	pxa_set_keypad_info(&palmz72_keypad_platform_data);
+	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 

arch/arm/mach-pxa/poodle.c

@@ -22,6 +22,7 @@
 #include <linux/delay.h>
 #include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
+#include <linux/i2c.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/mtd/sharpsl.h>
@@ -486,6 +487,10 @@ static struct platform_device *devices[] __initdata = {
 	&sharpsl_rom_device,
 };
 
+static struct i2c_board_info __initdata poodle_i2c_devices[] = {
+	{ I2C_BOARD_INFO("wm8731", 0x1b) },
+};
+
 static void poodle_poweroff(void)
 {
 	arm_machine_restart('h', NULL);
@@ -519,6 +524,7 @@ static void __init poodle_init(void)
 	pxa_set_mci_info(&poodle_mci_platform_data);
 	pxa_set_ficp_info(&poodle_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices));
 	poodle_init_spi();
 }
 

arch/arm/mm/mmu.c

@@ -836,6 +836,13 @@ void __init reserve_node_zero(pg_data_t *pgdat)
 				BOOTMEM_EXCLUSIVE);
 	}
 
+	if (machine_is_treo680()) {
+		reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
+				BOOTMEM_EXCLUSIVE);
+		reserve_bootmem_node(pgdat, 0xa2000000, 0x1000,
+				BOOTMEM_EXCLUSIVE);
+	}
+
 	if (machine_is_palmt5())
 		reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
 				BOOTMEM_EXCLUSIVE);

sound/soc/pxa/corgi.c

@@ -320,38 +320,6 @@ static struct snd_soc_device corgi_snd_devdata = {
 	.codec_dev = &soc_codec_dev_wm8731,
 };
 
-/*
- * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
- * New drivers should register the wm8731 I2C device in the machine
- * setup code (under arch/arm for ARM systems).
- */
-static int wm8731_i2c_register(void)
-{
-	struct i2c_board_info info;
-	struct i2c_adapter *adapter;
-	struct i2c_client *client;
-
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	info.addr = 0x1b;
-	strlcpy(info.type, "wm8731", I2C_NAME_SIZE);
-
-	adapter = i2c_get_adapter(0);
-	if (!adapter) {
-		printk(KERN_ERR "can't get i2c adapter 0\n");
-		return -ENODEV;
-	}
-
-	client = i2c_new_device(adapter, &info);
-	i2c_put_adapter(adapter);
-	if (!client) {
-		printk(KERN_ERR "can't add i2c device at 0x%x\n",
-			(unsigned int)info.addr);
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
 static struct platform_device *corgi_snd_device;
 
 static int __init corgi_init(void)
@@ -362,10 +330,6 @@ static int __init corgi_init(void)
 	      machine_is_husky()))
 		return -ENODEV;
 
-	ret = wm8731_i2c_register();
-	if (ret != 0)
-		return ret;
-
 	corgi_snd_device = platform_device_alloc("soc-audio", -1);
 	if (!corgi_snd_device)
 		return -ENOMEM;

sound/soc/pxa/poodle.c

@@ -280,38 +280,6 @@ static struct snd_soc_card snd_soc_poodle = {
 	.num_links = 1,
 };
 
-/*
- * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
- * New drivers should register the wm8731 I2C device in the machine
- * setup code (under arch/arm for ARM systems).
- */
-static int wm8731_i2c_register(void)
-{
-	struct i2c_board_info info;
-	struct i2c_adapter *adapter;
-	struct i2c_client *client;
-
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	info.addr = 0x1b;
-	strlcpy(info.type, "wm8731", I2C_NAME_SIZE);
-
-	adapter = i2c_get_adapter(0);
-	if (!adapter) {
-		printk(KERN_ERR "can't get i2c adapter 0\n");
-		return -ENODEV;
-	}
-
-	client = i2c_new_device(adapter, &info);
-	i2c_put_adapter(adapter);
-	if (!client) {
-		printk(KERN_ERR "can't add i2c device at 0x%x\n",
-			(unsigned int)info.addr);
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
 /* poodle audio subsystem */
 static struct snd_soc_device poodle_snd_devdata = {
 	.card = &snd_soc_poodle,
@@ -327,10 +295,6 @@ static int __init poodle_init(void)
 	if (!machine_is_poodle())
 		return -ENODEV;
 
-	ret = wm8731_i2c_register();
-	if (ret != 0)
-		return ret;
-
 	locomo_gpio_set_dir(&poodle_locomo_device.dev,
 		POODLE_LOCOMO_GPIO_AMP_ON, 0);
 	/* should we mute HP at startup - burning power ?*/