Merge branch 'mvneta_percpu_irq'

Gregory CLEMENT says:

====================
net: mvneta: Switch to per-CPU irq and make rxq_def useful

As stated in the first version: "this patchset reworks the Marvell
neta driver in order to really support its per-CPU interrupts, instead
of faking them as SPI, and allow the use of any RX queue instead of
the hardcoded RX queue 0 that we have currently."

Following the review which has been done, Maxime started adding the
CPU hotplug support. I continued his work a few weeks ago and here is
the result.

Since the 1st version the main change is this CPU hotplug support, in
order to validate it I powered up and down the CPUs while performing
iperf. I ran the tests during hours: the kernel didn't crash and the
network interfaces were still usable. Of course it impacted the
performance, but continuously power down and up the CPUs is not
something we usually do.

I also reorganized the series, the 3 first patches should go through
the irq subsystem, whereas the 4 others should go to the network
subsystem.

However, there is a runtime dependency between the two parts. Patch 5
depend on the patch 3 to be able to use the percpu irq.

Thanks,

Gregory

PS: Thanks to Willy who gave me some pointers on how to deal with the
NAPI.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/irqchip/irq-armada-370-xp.c

@@ -56,9 +56,6 @@
 
 #define ARMADA_370_XP_MAX_PER_CPU_IRQS		(28)
 
-#define ARMADA_370_XP_TIMER0_PER_CPU_IRQ	(5)
-#define ARMADA_370_XP_FABRIC_IRQ		(3)
-
 #define IPI_DOORBELL_START                      (0)
 #define IPI_DOORBELL_END                        (8)
 #define IPI_DOORBELL_MASK                       0xFF
@@ -81,13 +78,10 @@ static phys_addr_t msi_doorbell_addr;
 
 static inline bool is_percpu_irq(irq_hw_number_t irq)
 {
-	switch (irq) {
-	case ARMADA_370_XP_TIMER0_PER_CPU_IRQ:
-	case ARMADA_370_XP_FABRIC_IRQ:
+	if (irq <= ARMADA_370_XP_MAX_PER_CPU_IRQS)
 		return true;
-	default:
+
 	return false;
-	}
 }
 
 /*
@@ -549,7 +543,7 @@ static void armada_370_xp_mpic_resume(void)
 		if (virq == 0)
 			continue;
 
-		if (irq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
+		if (!is_percpu_irq(irq))
 			writel(irq, per_cpu_int_base +
 			       ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
 		else

kernel/irq/manage.c

@@ -1761,6 +1761,7 @@ void free_percpu_irq(unsigned int irq, void __percpu *dev_id)
 	kfree(__free_percpu_irq(irq, dev_id));
 	chip_bus_sync_unlock(desc);
 }
+EXPORT_SYMBOL_GPL(free_percpu_irq);
 
 /**
  *	setup_percpu_irq - setup a per-cpu interrupt
@@ -1790,9 +1791,10 @@ int setup_percpu_irq(unsigned int irq, struct irqaction *act)
  *	@devname: An ascii name for the claiming device
  *	@dev_id: A percpu cookie passed back to the handler function
  *
- *	This call allocates interrupt resources, but doesn't
- *	automatically enable the interrupt. It has to be done on each
- *	CPU using enable_percpu_irq().
+ *	This call allocates interrupt resources and enables the
+ *	interrupt on the local CPU. If the interrupt is supposed to be
+ *	enabled on other CPUs, it has to be done on each CPU using
+ *	enable_percpu_irq().
  *
  *	Dev_id must be globally unique. It is a per-cpu variable, and
  *	the handler gets called with the interrupted CPU's instance of
@@ -1831,6 +1833,7 @@ int request_percpu_irq(unsigned int irq, irq_handler_t handler,
 
 	return retval;
 }
+EXPORT_SYMBOL_GPL(request_percpu_irq);
 
 /**
  *	irq_get_irqchip_state - returns the irqchip state of a interrupt.