ath9k: MCI state machine based on MCI interrupt

Cc: Wilson Tsao <wtsao@qca.qualcomm.com>
Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com>
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/hw.c

@@ -2397,7 +2397,9 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 		pCap->hw_caps |= ATH9K_HW_CAP_4KB_SPLITTRANS;
 
 	if (common->btcoex_enabled) {
-		if (AR_SREV_9300_20_OR_LATER(ah)) {
+		if (AR_SREV_9462(ah))
+			btcoex_hw->scheme = ATH_BTCOEX_CFG_MCI;
+		else if (AR_SREV_9300_20_OR_LATER(ah)) {
 			btcoex_hw->scheme = ATH_BTCOEX_CFG_3WIRE;
 			btcoex_hw->btactive_gpio = ATH_BTACTIVE_GPIO_9300;
 			btcoex_hw->wlanactive_gpio = ATH_WLANACTIVE_GPIO_9300;

drivers/net/wireless/ath/ath9k/init.c

@@ -424,9 +424,17 @@ static int ath9k_init_btcoex(struct ath_softc *sc)
 			return -1;
 		txq = sc->tx.txq_map[WME_AC_BE];
 		ath9k_hw_init_btcoex_hw(sc->sc_ah, txq->axq_qnum);
+		sc->btcoex.bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
+		break;
+	case ATH_BTCOEX_CFG_MCI:
 		sc->btcoex.bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
 		sc->btcoex.duty_cycle = ATH_BTCOEX_DEF_DUTY_CYCLE;
 		INIT_LIST_HEAD(&sc->btcoex.mci.info);
+
+		r = ath_mci_setup(sc);
+		if (r)
+			return r;
+
 		if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_MCI) {
 			ah->btcoex_hw.mci.ready = false;
 			ah->btcoex_hw.mci.bt_state = 0;
@@ -861,6 +869,9 @@ static void ath9k_deinit_softc(struct ath_softc *sc)
 	    sc->sc_ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
 		ath_gen_timer_free(sc->sc_ah, sc->btcoex.no_stomp_timer);
 
+	if (sc->sc_ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_MCI)
+		ath_mci_cleanup(sc);
+
 	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
 		if (ATH_TXQ_SETUP(sc, i))
 			ath_tx_cleanupq(sc, &sc->tx.txq[i]);

drivers/net/wireless/ath/ath9k/main.c

@@ -742,6 +742,9 @@ void ath9k_tasklet(unsigned long data)
 		if (status & ATH9K_INT_GENTIMER)
 			ath_gen_timer_isr(sc->sc_ah);
 
+	if (status & ATH9K_INT_MCI)
+		ath_mci_intr(sc);
+
 out:
 	/* re-enable hardware interrupt */
 	ath9k_hw_enable_interrupts(ah);

drivers/net/wireless/ath/ath9k/mci.h

@@ -134,4 +134,5 @@ void ath_mci_process_status(struct ath_softc *sc,
 			    struct ath_mci_profile_status *status);
 int ath_mci_setup(struct ath_softc *sc);
 void ath_mci_cleanup(struct ath_softc *sc);
+void ath_mci_intr(struct ath_softc *sc);
 #endif