Commit 19cdce9c authored by Linus Torvalds's avatar Linus Torvalds

Merge http://lia64.bkbits.net/to-linus-2.5

into home.transmeta.com:/home/torvalds/v2.5/linux
parents 2b738648 50155729
mainmenu "IA-64 Linux Kernel Configuration" mainmenu "IA-64 Linux Kernel Configuration"
source "init/Kconfig" source "init/Kconfig"
menu "Processor type and features" menu "Processor type and features"
config IA64 config IA64
bool bool
default y default y
help help
The Itanium is Intel's 64-bit successor to the 32-bit X86 line. As The Itanium Processor Family is Intel's 64-bit successor to
of early 2001 it is not yet in widespread production use. The Linux the 32-bit X86 line. The IA-64 Linux project has a home
IA-64 project has a home page at <http://www.linuxia64.org/>. page at <http://www.linuxia64.org/> and a mailing list at
linux-ia64@linuxia64.org.
config ISA
bool
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
inside your box. Other bus systems are PCI, EISA, MicroChannel
(MCA) or VESA. ISA is an older system, now being displaced by PCI;
newer boards don't support it. If you have ISA, say Y, otherwise N.
config EISA
bool
---help---
The Extended Industry Standard Architecture (EISA) bus was
developed as an open alternative to the IBM MicroChannel bus.
The EISA bus provided some of the features of the IBM MicroChannel
bus while maintaining backward compatibility with cards made for
the older ISA bus. The EISA bus saw limited use between 1988 and
1995 when it was made obsolete by the PCI bus.
Say Y here if you are building a kernel for an EISA-based machine.
Otherwise, say N.
config MCA
bool
help
MicroChannel Architecture is found in some IBM PS/2 machines and
laptops. It is a bus system similar to PCI or ISA. See
<file:Documentation/mca.txt> (and especially the web page given
there) before attempting to build an MCA bus kernel.
config SBUS
bool
config RWSEM_GENERIC_SPINLOCK config RWSEM_GENERIC_SPINLOCK
bool bool
default y default y
config RWSEM_XCHGADD_ALGORITHM
bool
choice choice
prompt "IA-64 processor type" prompt "IA-64 processor type"
default ITANIUM default ITANIUM
...@@ -63,10 +24,12 @@ choice ...@@ -63,10 +24,12 @@ choice
config ITANIUM config ITANIUM
bool "Itanium" bool "Itanium"
help help
Select your IA64 processor type. The default is Intel Itanium. Select your IA-64 processor type. The default is Intel Itanium.
This choice is safe for all IA-64 systems, but may not perform
optimally on systems with, say, Itanium 2 or newer processors.
config MCKINLEY config MCKINLEY
bool "Itanium-2" bool "Itanium 2"
help help
Select this to configure for an Itanium 2 (McKinley) processor. Select this to configure for an Itanium 2 (McKinley) processor.
...@@ -90,7 +53,7 @@ config IA64_GENERIC ...@@ -90,7 +53,7 @@ config IA64_GENERIC
HP-simulator For the HP simulator HP-simulator For the HP simulator
(<http://software.hp.com/ia64linux/>). (<http://software.hp.com/ia64linux/>).
HP-zx1 For HP zx1 platforms. HP-zx1 For HP zx1-based systems.
SN1-simulator For the SGI SN1 simulator. SN1-simulator For the SGI SN1 simulator.
DIG-compliant For DIG ("Developer's Interface Guide") compliant DIG-compliant For DIG ("Developer's Interface Guide") compliant
systems. systems.
...@@ -107,8 +70,8 @@ config IA64_HP_ZX1 ...@@ -107,8 +70,8 @@ config IA64_HP_ZX1
bool "HP-zx1" bool "HP-zx1"
help help
Build a kernel that runs on HP zx1-based systems. This adds support Build a kernel that runs on HP zx1-based systems. This adds support
for the zx1 IOMMU and makes root bus bridges appear in PCI config space for the zx1 I/O MMU and makes root bus bridges appear in PCI config
(required for zx1 agpgart support). space (required for zx1 agpgart support).
config IA64_SGI_SN1 config IA64_SGI_SN1
bool "SGI-SN1" bool "SGI-SN1"
...@@ -129,15 +92,15 @@ config IA64_PAGE_SIZE_4KB ...@@ -129,15 +92,15 @@ config IA64_PAGE_SIZE_4KB
performance, a page size of 8KB or 16KB is recommended. For best performance, a page size of 8KB or 16KB is recommended. For best
IA-32 compatibility, a page size of 4KB should be selected (the vast IA-32 compatibility, a page size of 4KB should be selected (the vast
majority of IA-32 binaries work perfectly fine with a larger page majority of IA-32 binaries work perfectly fine with a larger page
size). For Itanium systems, do NOT chose a page size larger than size). For Itanium 2 or newer systems, a page size of 64KB can also
16KB. be selected.
4KB For best IA-32 compatibility 4KB For best IA-32 compatibility
8KB For best IA-64 performance 8KB For best IA-64 performance
16KB For best IA-64 performance 16KB For best IA-64 performance
64KB Not for Itanium. 64KB Requires Itanium 2 or newer processor.
If you don't know what to do, choose 8KB. If you don't know what to do, choose 16KB.
config IA64_PAGE_SIZE_8KB config IA64_PAGE_SIZE_8KB
bool "8KB" bool "8KB"
...@@ -200,7 +163,7 @@ config ACPI_KERNEL_CONFIG ...@@ -200,7 +163,7 @@ config ACPI_KERNEL_CONFIG
default y default y
help help
If you say `Y' here, Linux's ACPI support will use the If you say `Y' here, Linux's ACPI support will use the
hardware-level system descriptions found on IA64 machines. hardware-level system descriptions found on IA-64 systems.
config IA64_BRL_EMU config IA64_BRL_EMU
bool bool
...@@ -226,15 +189,15 @@ config MCKINLEY_ASTEP_SPECIFIC ...@@ -226,15 +189,15 @@ config MCKINLEY_ASTEP_SPECIFIC
bool "Enable McKinley A-step specific code" bool "Enable McKinley A-step specific code"
depends on MCKINLEY depends on MCKINLEY
help help
Select this option to build a kernel for an IA64 McKinley system Select this option to build a kernel for an IA-64 McKinley prototype
with any A-stepping CPU. system with any A-stepping CPU.
config MCKINLEY_A0_SPECIFIC config MCKINLEY_A0_SPECIFIC
bool "Enable McKinley A0/A1-step specific code" bool "Enable McKinley A0/A1-step specific code"
depends on MCKINLEY_ASTEP_SPECIFIC depends on MCKINLEY_ASTEP_SPECIFIC
help help
Select this option to build a kernel for an IA64 McKinley system Select this option to build a kernel for an IA-64 McKinley prototype
with an A0 or A1 stepping CPU. system with an A0 or A1 stepping CPU.
config NUMA config NUMA
bool "Enable NUMA support" if IA64_GENERIC || IA64_DIG || IA64_HP_ZX1 bool "Enable NUMA support" if IA64_GENERIC || IA64_DIG || IA64_HP_ZX1
...@@ -242,14 +205,14 @@ config NUMA ...@@ -242,14 +205,14 @@ config NUMA
help help
Say Y to compile the kernel to support NUMA (Non-Uniform Memory Say Y to compile the kernel to support NUMA (Non-Uniform Memory
Access). This option is for configuring high-end multiprocessor Access). This option is for configuring high-end multiprocessor
server machines. If in doubt, say N. server systems. If in doubt, say N.
config DISCONTIGMEM config DISCONTIGMEM
bool bool
depends on IA64_SGI_SN1 || IA64_SGI_SN2 || (IA64_GENERIC || IA64_DIG || IA64_HP_ZX1) && NUMA depends on IA64_SGI_SN1 || IA64_SGI_SN2 || (IA64_GENERIC || IA64_DIG || IA64_HP_ZX1) && NUMA
default y default y
help help
Say Y to upport efficient handling of discontiguous physical memory, Say Y to support efficient handling of discontiguous physical memory,
for architectures which are either NUMA (Non-Uniform Memory Access) for architectures which are either NUMA (Non-Uniform Memory Access)
or have huge holes in the physical address space for other reasons. or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more. See <file:Documentation/vm/numa> for more.
...@@ -298,14 +261,14 @@ config IA64_SGI_SN_DEBUG ...@@ -298,14 +261,14 @@ config IA64_SGI_SN_DEBUG
depends on IA64_SGI_SN1 || IA64_SGI_SN2 depends on IA64_SGI_SN1 || IA64_SGI_SN2
help help
Turns on extra debugging code in the SGI SN (Scalable NUMA) platform Turns on extra debugging code in the SGI SN (Scalable NUMA) platform
for IA64. Unless you are debugging problems on an SGI SN IA64 box, for IA-64. Unless you are debugging problems on an SGI SN IA-64 box,
say N. say N.
config IA64_SGI_SN_SIM config IA64_SGI_SN_SIM
bool "Enable SGI Medusa Simulator Support" bool "Enable SGI Medusa Simulator Support"
depends on IA64_SGI_SN1 || IA64_SGI_SN2 depends on IA64_SGI_SN1 || IA64_SGI_SN2
help help
If you are compiling a kernel that will run under SGI's IA64 If you are compiling a kernel that will run under SGI's IA-64
simulator (Medusa) then say Y, otherwise say N. simulator (Medusa) then say Y, otherwise say N.
config IA64_SGI_AUTOTEST config IA64_SGI_AUTOTEST
...@@ -323,7 +286,7 @@ config SERIAL_SGI_L1_PROTOCOL ...@@ -323,7 +286,7 @@ config SERIAL_SGI_L1_PROTOCOL
depends on IA64_SGI_SN1 || IA64_SGI_SN2 depends on IA64_SGI_SN1 || IA64_SGI_SN2
help help
Uses protocol mode instead of raw mode for the level 1 console on the Uses protocol mode instead of raw mode for the level 1 console on the
SGI SN (Scalable NUMA) platform for IA64. If you are compiling for SGI SN (Scalable NUMA) platform for IA-64. If you are compiling for
an SGI SN box then Y is the recommended value, otherwise say N. an SGI SN box then Y is the recommended value, otherwise say N.
config PERCPU_IRQ config PERCPU_IRQ
...@@ -336,8 +299,8 @@ config PCIBA ...@@ -336,8 +299,8 @@ config PCIBA
depends on IA64_SGI_SN1 || IA64_SGI_SN2 depends on IA64_SGI_SN1 || IA64_SGI_SN2
help help
IRIX PCIBA-inspired user mode PCI interface for the SGI SN (Scalable IRIX PCIBA-inspired user mode PCI interface for the SGI SN (Scalable
NUMA) platform for IA64. Unless you are compiling a kernel for an NUMA) platform for IA-64. Unless you are compiling a kernel for an
SGI SN IA64 box, say N. SGI SN IA-64 box, say N.
# On IA-64, we always want an ELF /proc/kcore. # On IA-64, we always want an ELF /proc/kcore.
config KCORE_ELF config KCORE_ELF
...@@ -402,27 +365,17 @@ config SMP ...@@ -402,27 +365,17 @@ config SMP
bool "SMP support" bool "SMP support"
---help--- ---help---
This enables support for systems with more than one CPU. If you have This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If a system with only one CPU say N. If you have a system with more than
you have a system with more than one CPU, say Y. one CPU, say Y.
If you say N here, the kernel will run on single and multiprocessor If you say N here, the kernel will run on single and multiprocessor
machines, but will use only one CPU of a multiprocessor machine. If systems, but will use only one CPU of a multiprocessor system. If
you say Y here, the kernel will run on many, but not all, you say Y here, the kernel will run on many, but not all,
singleprocessor machines. On a singleprocessor machine, the kernel singleprocessor system. On a singleprocessor system, the kernel
will run faster if you say N here. will run faster if you say N here.
Note that if you say Y here and choose architecture "586" or
"Pentium" under "Processor family", the kernel will not work on 486
architectures. Similarly, multiprocessor kernels for the "PPro"
architecture may not work on all Pentium based boards.
People using multiprocessor machines who say Y here should also say
Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
Management" code will be disabled if you say Y here.
See also the <file:Documentation/smp.tex>, See also the <file:Documentation/smp.tex>,
<file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>, <file:Documentation/smp.txt>, and the SMP-HOWTO available at
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://www.linuxdoc.org/docs.html#howto>. <http://www.linuxdoc.org/docs.html#howto>.
If you don't know what to do here, say N. If you don't know what to do here, say N.
...@@ -430,17 +383,19 @@ config SMP ...@@ -430,17 +383,19 @@ config SMP
config IA32_SUPPORT config IA32_SUPPORT
bool "Support running of Linux/x86 binaries" bool "Support running of Linux/x86 binaries"
help help
IA64 processors can run IA32 (that is, x86) binaries by emulating IA-64 processors can execute IA-32 (X86) instructions. By
the IA32 instruction set. Say Y here to build in kernel support for saying Y here, the kernel will include IA-32 system call
this. If in doubt, say Y. emulation support which makes it possible to transparently
run IA-32 Linux binaries on an IA-64 Linux system.
If in doubt, say Y.
config PERFMON config PERFMON
bool "Performance monitor support" bool "Performance monitor support"
help help
Selects whether support for the IA-64 performance monitor hardware Selects whether support for the IA-64 performance monitor hardware
is included in the kernel. This makes some kernel data-structures a is included in the kernel. This makes some kernel data-structures a
little bigger and slows down execution a bit, but it is still little bigger and slows down execution a bit, but it is generally
usually a good idea to turn this on. If you're unsure, say N. a good idea to turn this on. If you're unsure, say Y.
config IA64_PALINFO config IA64_PALINFO
tristate "/proc/pal support" tristate "/proc/pal support"
...@@ -450,7 +405,7 @@ config IA64_PALINFO ...@@ -450,7 +405,7 @@ config IA64_PALINFO
about the processors in your systems, such as cache and TLB sizes about the processors in your systems, such as cache and TLB sizes
and the PAL firmware version in use. and the PAL firmware version in use.
To use this option, you have to check that the "/proc file system To use this option, you have to ensure that the "/proc file system
support" (CONFIG_PROC_FS) is enabled, too. support" (CONFIG_PROC_FS) is enabled, too.
config EFI_VARS config EFI_VARS
...@@ -473,42 +428,21 @@ config BINFMT_ELF ...@@ -473,42 +428,21 @@ config BINFMT_ELF
---help--- ---help---
ELF (Executable and Linkable Format) is a format for libraries and ELF (Executable and Linkable Format) is a format for libraries and
executables used across different architectures and operating executables used across different architectures and operating
systems. Saying Y here will enable your kernel to run ELF binaries systems. Saying Y here will enable your kernel to run ELF binaries.
and enlarge it by about 13 KB. ELF support under Linux has now all
but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
because it is portable (this does *not* mean that you will be able
to run executables from different architectures or operating systems
however) and makes building run-time libraries very easy. Many new
executables are distributed solely in ELF format. You definitely
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from Information about ELF is contained in the ELF HOWTO available from
<http://www.linuxdoc.org/docs.html#howto>. <http://www.linuxdoc.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
you'll have to install the newest ELF runtime libraries, including
ld.so (check the file <file:Documentation/Changes> for location and
latest version).
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called binfmt_elf.o. Saying M or N here is dangerous because
some crucial programs on your system might be in ELF format.
config BINFMT_MISC config BINFMT_MISC
tristate "Kernel support for MISC binaries" tristate "Kernel support for MISC binaries"
---help--- ---help---
If you say Y here, it will be possible to plug wrapper-driven binary If you say Y here, it will be possible to plug wrapper-driven binary
formats into the kernel. You will like this especially when you use formats into the kernel. You will like this especially when you use
programs that need an interpreter to run like Java, Python or programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under Emacs-Lisp. Once you have registered such a binary class with the
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from kernel, you can start one of those programs simply by typing in its
<http://www.linuxdoc.org/docs.html#howto>). Once you have name at a shell prompt; Linux will automatically feed it to the
registered such a binary class with the kernel, you can start one of correct interpreter.
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
You can do other nice things, too. Read the file You can do other nice things, too. Read the file
<file:Documentation/binfmt_misc.txt> to learn how to use this <file:Documentation/binfmt_misc.txt> to learn how to use this
...@@ -698,7 +632,7 @@ config NETDEVICES ...@@ -698,7 +632,7 @@ config NETDEVICES
CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
and newer replacement for SLIP) or PLIP (Parallel Line Internet and newer replacement for SLIP) or PLIP (Parallel Line Internet
Protocol is mainly used to create a mini network by connecting the Protocol is mainly used to create a mini network by connecting the
parallel ports of two local machines) or AX.25/KISS (protocol for parallel ports of two local systems) or AX.25/KISS (protocol for
sending Internet traffic over amateur radio links). sending Internet traffic over amateur radio links).
Make sure to read the NET-3-HOWTO. Eventually, you will have to read Make sure to read the NET-3-HOWTO. Eventually, you will have to read
...@@ -831,21 +765,6 @@ config SOUND ...@@ -831,21 +765,6 @@ config SOUND
<file:Documentation/sound/README.OSS> contains some slightly <file:Documentation/sound/README.OSS> contains some slightly
outdated but still useful information as well. outdated but still useful information as well.
If you have a PnP sound card and you want to configure it at boot
time using the ISA PnP tools (read
<http://www.roestock.demon.co.uk/isapnptools/>), then you need to
compile the sound card support as a module ( = code which can be
inserted in and removed from the running kernel whenever you want)
and load that module after the PnP configuration is finished. To do
this, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/sound/README.modules>; the module will be
called soundcore.o.
I'm told that even without a sound card, you can make your computer
say more than an occasional beep, by programming the PC speaker.
Kernel patches and supporting utilities to do that are in the pcsp
package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
source "sound/Kconfig" source "sound/Kconfig"
endmenu endmenu
...@@ -870,7 +789,7 @@ choice ...@@ -870,7 +789,7 @@ choice
config IA64_GRANULE_16MB config IA64_GRANULE_16MB
bool "16MB" bool "16MB"
help help
IA64 identity-mapped regions use a large page size called "granules". IA-64 identity-mapped regions use a large page size called "granules".
Select "16MB" for a small granule size. Select "16MB" for a small granule size.
Select "64MB" for a large granule size. This is the current default. Select "64MB" for a large granule size. This is the current default.
...@@ -895,14 +814,14 @@ config KALLSYMS ...@@ -895,14 +814,14 @@ config KALLSYMS
somewhat, as all symbols have to be loaded into the kernel image. somewhat, as all symbols have to be loaded into the kernel image.
config IA64_PRINT_HAZARDS config IA64_PRINT_HAZARDS
bool "Print possible IA64 hazards to console" bool "Print possible IA-64 dependency violations to console"
depends on DEBUG_KERNEL depends on DEBUG_KERNEL
help help
Selecting this option prints more information for Illegal Dependency Selecting this option prints more information for Illegal Dependency
Faults, that is, for Read after Write, Write after Write or Write Faults, that is, for Read-after-Write (RAW), Write-after-Write (WAW),
after Read violations. This option is ignored if you are compiling or Write-after-Read (WAR) violations. This option is ignored if you
for an Itanium A step processor (CONFIG_ITANIUM_ASTEP_SPECIFIC). If are compiling for an Itanium A step processor
you're unsure, select Y. (CONFIG_ITANIUM_ASTEP_SPECIFIC). If you're unsure, select Y.
config DISABLE_VHPT config DISABLE_VHPT
bool "Disable VHPT" bool "Disable VHPT"
...@@ -931,10 +850,11 @@ config IA64_EARLY_PRINTK ...@@ -931,10 +850,11 @@ config IA64_EARLY_PRINTK
bool "Early printk support" bool "Early printk support"
depends on DEBUG_KERNEL depends on DEBUG_KERNEL
help help
Selecting this option uses the VGA screen for printk() output before Selecting this option uses the VGA screen or serial console for
the consoles are initialised. It is useful for debugging problems printk() output before the consoles are initialised. It is useful
early in the boot process, but only if you have a VGA screen for debugging problems early in the boot process, but only if you
attached. If you're unsure, select N. have a suitable VGA/serial console attached. If you're unsure,
select N.
config IA64_EARLY_PRINTK_UART config IA64_EARLY_PRINTK_UART
bool "Early printk on MMIO serial port" bool "Early printk on MMIO serial port"
...@@ -970,7 +890,7 @@ config IA64_DEBUG_CMPXCHG ...@@ -970,7 +890,7 @@ config IA64_DEBUG_CMPXCHG
bool "Turn on compare-and-exchange bug checking (slow!)" bool "Turn on compare-and-exchange bug checking (slow!)"
depends on DEBUG_KERNEL depends on DEBUG_KERNEL
help help
Selecting this option turns on bug checking for the IA64 Selecting this option turns on bug checking for the IA-64
compare-and-exchange instructions. This is slow! Itaniums compare-and-exchange instructions. This is slow! Itaniums
from step B3 or later don't have this problem. If you're unsure, from step B3 or later don't have this problem. If you're unsure,
select N. select N.
...@@ -979,7 +899,7 @@ config IA64_DEBUG_IRQ ...@@ -979,7 +899,7 @@ config IA64_DEBUG_IRQ
bool "Turn on irq debug checks (slow!)" bool "Turn on irq debug checks (slow!)"
depends on DEBUG_KERNEL depends on DEBUG_KERNEL
help help
Selecting this option turns on bug checking for the IA64 irq_save Selecting this option turns on bug checking for the IA-64 irq_save
and restore instructions. It's useful for tracking down spinlock and restore instructions. It's useful for tracking down spinlock
problems, but slow! If you're unsure, select N. problems, but slow! If you're unsure, select N.
...@@ -988,4 +908,3 @@ endmenu ...@@ -988,4 +908,3 @@ endmenu
source "security/Kconfig" source "security/Kconfig"
source "crypto/Kconfig" source "crypto/Kconfig"
...@@ -26,12 +26,7 @@ CONFIG_MODVERSIONS=y ...@@ -26,12 +26,7 @@ CONFIG_MODVERSIONS=y
# Processor type and features # Processor type and features
# #
CONFIG_IA64=y CONFIG_IA64=y
# CONFIG_ISA is not set
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SBUS is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ITANIUM=y CONFIG_ITANIUM=y
# CONFIG_MCKINLEY is not set # CONFIG_MCKINLEY is not set
# CONFIG_IA64_GENERIC is not set # CONFIG_IA64_GENERIC is not set
...@@ -43,6 +38,7 @@ CONFIG_IA64_DIG=y ...@@ -43,6 +38,7 @@ CONFIG_IA64_DIG=y
# CONFIG_IA64_PAGE_SIZE_4KB is not set # CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set # CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
CONFIG_ACPI=y CONFIG_ACPI=y
CONFIG_ACPI_EFI=y CONFIG_ACPI_EFI=y
CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_INTERPRETER=y
...@@ -69,23 +65,19 @@ CONFIG_BINFMT_ELF=y ...@@ -69,23 +65,19 @@ CONFIG_BINFMT_ELF=y
# #
# ACPI Support # ACPI Support
# #
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_BUTTON=y CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=m CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_DEBUG is not set # CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI=y
CONFIG_ACPI=y
CONFIG_ACPI_EFI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_BUS=y CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_POWER=y CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_SYSTEM=y
CONFIG_PCI=y CONFIG_PCI=y
CONFIG_PCI_NAMES=y CONFIG_PCI_NAMES=y
# CONFIG_HOTPLUG is not set # CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set
# #
# Parallel port support # Parallel port support
...@@ -101,30 +93,18 @@ CONFIG_PCI_NAMES=y ...@@ -101,30 +93,18 @@ CONFIG_PCI_NAMES=y
# Plug and Play configuration # Plug and Play configuration
# #
# CONFIG_PNP is not set # CONFIG_PNP is not set
# CONFIG_PNP_NAMES is not set
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
# #
# Block devices # Block devices
# #
# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# #
# IEEE 1394 (FireWire) support (EXPERIMENTAL) # IEEE 1394 (FireWire) support (EXPERIMENTAL)
...@@ -135,32 +115,16 @@ CONFIG_BLK_DEV_LOOP=y ...@@ -135,32 +115,16 @@ CONFIG_BLK_DEV_LOOP=y
# I2O device support # I2O device support
# #
# CONFIG_I2O is not set # CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
# #
# Multi-device support (RAID and LVM) # Multi-device support (RAID and LVM)
# #
# CONFIG_MD is not set # CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set
# #
# Fusion MPT device support # Fusion MPT device support
# #
# CONFIG_FUSION is not set # CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set
# #
# ATA/ATAPI/MFM/RLL support # ATA/ATAPI/MFM/RLL support
...@@ -175,12 +139,10 @@ CONFIG_BLK_DEV_IDE=y ...@@ -175,12 +139,10 @@ CONFIG_BLK_DEV_IDE=y
# #
# Please see Documentation/ide.txt for help/info on IDE drives # Please see Documentation/ide.txt for help/info on IDE drives
# #
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set # CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set # CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEFLOPPY=y CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=y CONFIG_BLK_DEV_IDESCSI=y
...@@ -189,54 +151,37 @@ CONFIG_BLK_DEV_IDESCSI=y ...@@ -189,54 +151,37 @@ CONFIG_BLK_DEV_IDESCSI=y
# #
# IDE chipset support/bugfixes # IDE chipset support/bugfixes
# #
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
CONFIG_BLK_DEV_IDEPCI=y CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_GENERIC is not set
CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set # CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_IDE_TCQ_DEFAULT is not set
# CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_PCI_AUTO is not set # CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set # CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
CONFIG_BLK_DEV_ADMA=y CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_AMD74XX_OVERRIDE is not set
# CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NFORCE is not set # CONFIG_BLK_DEV_NFORCE is not set
# CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_IDEDMA_IVB is not set # CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_IDE_MODES=y
# #
# SCSI support # SCSI support
...@@ -247,7 +192,6 @@ CONFIG_SCSI=y ...@@ -247,7 +192,6 @@ CONFIG_SCSI=y
# SCSI support type (disk, tape, CD-ROM) # SCSI support type (disk, tape, CD-ROM)
# #
CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
# CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set # CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set # CONFIG_BLK_DEV_SR is not set
...@@ -265,7 +209,6 @@ CONFIG_SCSI_LOGGING=y ...@@ -265,7 +209,6 @@ CONFIG_SCSI_LOGGING=y
# SCSI low-level drivers # SCSI low-level drivers
# #
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX is not set
...@@ -278,31 +221,25 @@ CONFIG_SCSI_LOGGING=y ...@@ -278,31 +221,25 @@ CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set # CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set # CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DEBUG is not set
...@@ -335,9 +272,6 @@ CONFIG_IPV6_SCTP__=y ...@@ -335,9 +272,6 @@ CONFIG_IPV6_SCTP__=y
# CONFIG_ATM is not set # CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set # CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set # CONFIG_LLC is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set # CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set # CONFIG_BRIDGE is not set
# CONFIG_X25 is not set # CONFIG_X25 is not set
...@@ -372,13 +306,9 @@ CONFIG_DUMMY=y ...@@ -372,13 +306,9 @@ CONFIG_DUMMY=y
# Ethernet (10 or 100Mbit) # Ethernet (10 or 100Mbit)
# #
CONFIG_NET_ETHERNET=y CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
# CONFIG_HAPPYMEAL is not set # CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set # CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set # CONFIG_NET_VENDOR_RACAL is not set
...@@ -387,34 +317,22 @@ CONFIG_NET_ETHERNET=y ...@@ -387,34 +317,22 @@ CONFIG_NET_ETHERNET=y
# #
# CONFIG_NET_TULIP is not set # CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set # CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set # CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set # CONFIG_DGRS is not set
CONFIG_EEPRO100=y CONFIG_EEPRO100=y
# CONFIG_E100 is not set # CONFIG_E100 is not set
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set # CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set # CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set # CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139CP is not set # CONFIG_8139CP is not set
# CONFIG_8139TOO is not set # CONFIG_8139TOO is not set
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set # CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set # CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set # CONFIG_SUNDANCE is not set
# CONFIG_SUNDANCE_MMIO is not set
# CONFIG_TLAN is not set # CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set # CONFIG_VIA_RHINE is not set
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_NET_POCKET is not set # CONFIG_NET_POCKET is not set
# #
...@@ -423,8 +341,6 @@ CONFIG_EEPRO100=y ...@@ -423,8 +341,6 @@ CONFIG_EEPRO100=y
# CONFIG_ACENIC is not set # CONFIG_ACENIC is not set
# CONFIG_DL2K is not set # CONFIG_DL2K is not set
# CONFIG_E1000 is not set # CONFIG_E1000 is not set
# CONFIG_E1000_NAPI is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set # CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set # CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set # CONFIG_YELLOWFIN is not set
...@@ -432,7 +348,6 @@ CONFIG_EEPRO100=y ...@@ -432,7 +348,6 @@ CONFIG_EEPRO100=y
# CONFIG_TIGON3 is not set # CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set # CONFIG_FDDI is not set
# CONFIG_HIPPI is not set # CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set # CONFIG_PPP is not set
# CONFIG_SLIP is not set # CONFIG_SLIP is not set
...@@ -491,17 +406,10 @@ CONFIG_INPUT_EVDEV=y ...@@ -491,17 +406,10 @@ CONFIG_INPUT_EVDEV=y
# #
# CONFIG_GAMEPORT is not set # CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y CONFIG_SOUND_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
# CONFIG_GAMEPORT_CS461x is not set
CONFIG_SERIO=y CONFIG_SERIO=y
CONFIG_SERIO_I8042=y CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# #
# Input Device Drivers # Input Device Drivers
...@@ -514,34 +422,8 @@ CONFIG_KEYBOARD_ATKBD=y ...@@ -514,34 +422,8 @@ CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_JOYSTICK is not set
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDDLER is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_INPUT_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_INPUT_MISC=y CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set # CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_UINPUT is not set # CONFIG_INPUT_UINPUT is not set
...@@ -559,9 +441,6 @@ CONFIG_HW_CONSOLE=y ...@@ -559,9 +441,6 @@ CONFIG_HW_CONSOLE=y
# #
CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not set
# CONFIG_SERIAL_8250_HCDP is not set
CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set # CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_SHARE_IRQ=y
...@@ -582,10 +461,8 @@ CONFIG_UNIX98_PTY_COUNT=256 ...@@ -582,10 +461,8 @@ CONFIG_UNIX98_PTY_COUNT=256
# #
CONFIG_I2C=y CONFIG_I2C=y
CONFIG_I2C_ALGOBIT=y CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_PHILIPSPAR is not set
# CONFIG_I2C_ELV is not set # CONFIG_I2C_ELV is not set
# CONFIG_I2C_VELLEMAN is not set # CONFIG_I2C_VELLEMAN is not set
# CONFIG_SCx200_I2C is not set
# CONFIG_SCx200_ACB is not set # CONFIG_SCx200_ACB is not set
# CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_CHARDEV=y CONFIG_I2C_CHARDEV=y
...@@ -632,7 +509,6 @@ CONFIG_DRM_RADEON=y ...@@ -632,7 +509,6 @@ CONFIG_DRM_RADEON=y
CONFIG_DRM_I810=y CONFIG_DRM_I810=y
CONFIG_DRM_I830=y CONFIG_DRM_I830=y
CONFIG_DRM_MGA=y CONFIG_DRM_MGA=y
# CONFIG_SCx200_GPIO is not set
# CONFIG_RAW_DRIVER is not set # CONFIG_RAW_DRIVER is not set
# #
...@@ -644,28 +520,21 @@ CONFIG_DRM_MGA=y ...@@ -644,28 +520,21 @@ CONFIG_DRM_MGA=y
# File systems # File systems
# #
# CONFIG_QUOTA is not set # CONFIG_QUOTA is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_AUTOFS_FS=y CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set # CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set # CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set # CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set # CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set # CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=y CONFIG_EXT3_FS=y
CONFIG_JBD=y CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set # CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=y CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y CONFIG_MSDOS_FS=y
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=y CONFIG_VFAT_FS=y
# CONFIG_EFS_FS is not set # CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set # CONFIG_CRAMFS is not set
# CONFIG_TMPFS is not set # CONFIG_TMPFS is not set
CONFIG_RAMFS=y CONFIG_RAMFS=y
...@@ -673,31 +542,20 @@ CONFIG_ISO9660_FS=y ...@@ -673,31 +542,20 @@ CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set # CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set # CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set # CONFIG_JFS_FS is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_MINIX_FS is not set # CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set # CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set # CONFIG_NTFS_FS is not set
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set # CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set # CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set # CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set # CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set # CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_XFS_FS is not set # CONFIG_XFS_FS is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# #
# Network File Systems # Network File Systems
...@@ -707,10 +565,9 @@ CONFIG_EXT2_FS=y ...@@ -707,10 +565,9 @@ CONFIG_EXT2_FS=y
CONFIG_NFS_FS=y CONFIG_NFS_FS=y
CONFIG_NFS_V3=y CONFIG_NFS_V3=y
CONFIG_NFS_V4=y CONFIG_NFS_V4=y
# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=y CONFIG_NFSD=y
CONFIG_NFSD_V3=y CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y # CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set # CONFIG_NFSD_TCP is not set
CONFIG_SUNRPC=y CONFIG_SUNRPC=y
CONFIG_LOCKD=y CONFIG_LOCKD=y
...@@ -719,16 +576,7 @@ CONFIG_EXPORTFS=y ...@@ -719,16 +576,7 @@ CONFIG_EXPORTFS=y
# CONFIG_CIFS is not set # CONFIG_CIFS is not set
# CONFIG_SMB_FS is not set # CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set # CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_AFS_FS is not set # CONFIG_AFS_FS is not set
# CONFIG_ZISOFS_FS is not set
# #
# Partition Types # Partition Types
...@@ -749,7 +597,6 @@ CONFIG_MSDOS_PARTITION=y ...@@ -749,7 +597,6 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set # CONFIG_SUN_PARTITION is not set
CONFIG_EFI_PARTITION=y CONFIG_EFI_PARTITION=y
# CONFIG_SMB_NLS is not set
CONFIG_NLS=y CONFIG_NLS=y
# #
...@@ -816,7 +663,6 @@ CONFIG_SOUND_PRIME=y ...@@ -816,7 +663,6 @@ CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_BT878 is not set # CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set # CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set # CONFIG_SOUND_EMU10K1 is not set
# CONFIG_MIDI_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set # CONFIG_SOUND_FUSION is not set
CONFIG_SOUND_CS4281=y CONFIG_SOUND_CS4281=y
# CONFIG_SOUND_ES1370 is not set # CONFIG_SOUND_ES1370 is not set
...@@ -831,7 +677,6 @@ CONFIG_SOUND_CS4281=y ...@@ -831,7 +677,6 @@ CONFIG_SOUND_CS4281=y
# CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set # CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_MIDI_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set # CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_TVMIXER is not set # CONFIG_SOUND_TVMIXER is not set
...@@ -870,15 +715,6 @@ CONFIG_USB_UHCI_HCD_ALT=y ...@@ -870,15 +715,6 @@ CONFIG_USB_UHCI_HCD_ALT=y
# CONFIG_USB_ACM is not set # CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set # CONFIG_USB_PRINTER is not set
# CONFIG_USB_STORAGE is not set # CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# #
# USB Human Interface Devices (HID) # USB Human Interface Devices (HID)
...@@ -886,8 +722,6 @@ CONFIG_USB_UHCI_HCD_ALT=y ...@@ -886,8 +722,6 @@ CONFIG_USB_UHCI_HCD_ALT=y
CONFIG_USB_HID=y CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set # CONFIG_HID_FF is not set
# CONFIG_HID_PID is not set
# CONFIG_LOGITECH_FF is not set
CONFIG_USB_HIDDEV=y CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set # CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set # CONFIG_USB_WACOM is not set
...@@ -910,14 +744,6 @@ CONFIG_USB_HIDDEV=y ...@@ -910,14 +744,6 @@ CONFIG_USB_HIDDEV=y
# #
# Video4Linux support is needed for USB Multimedia device support # Video4Linux support is needed for USB Multimedia device support
# #
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set
# #
# USB Network adaptors # USB Network adaptors
...@@ -932,62 +758,26 @@ CONFIG_USB_HIDDEV=y ...@@ -932,62 +758,26 @@ CONFIG_USB_HIDDEV=y
# #
# USB port drivers # USB port drivers
# #
# CONFIG_USB_USS720 is not set
# #
# USB Serial Converter support # USB Serial Converter support
# #
# CONFIG_USB_SERIAL is not set # CONFIG_USB_SERIAL is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# #
# USB Miscellaneous drivers # USB Miscellaneous drivers
# #
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set # CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set # CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set # CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set # CONFIG_USB_LCD is not set
# CONFIG_USB_SPEEDTOUCH is not set
# CONFIG_USB_TEST is not set # CONFIG_USB_TEST is not set
# #
# Library routines # Library routines
# #
# CONFIG_CRC32 is not set # CONFIG_CRC32 is not set
# CONFIG_ZLIB_INFLATE is not set
# CONFIG_ZLIB_DEFLATE is not set
# #
# Bluetooth support # Bluetooth support
...@@ -1016,3 +806,8 @@ CONFIG_IA64_EARLY_PRINTK_VGA=y ...@@ -1016,3 +806,8 @@ CONFIG_IA64_EARLY_PRINTK_VGA=y
# Security options # Security options
# #
CONFIG_SECURITY_CAPABILITIES=y CONFIG_SECURITY_CAPABILITIES=y
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
...@@ -130,20 +130,6 @@ simscsi_info (struct Scsi_Host *host) ...@@ -130,20 +130,6 @@ simscsi_info (struct Scsi_Host *host)
return "simulated SCSI host adapter"; return "simulated SCSI host adapter";
} }
int
simscsi_abort (Scsi_Cmnd *cmd)
{
printk ("simscsi_abort: unimplemented\n");
return SCSI_ABORT_SUCCESS;
}
int
simscsi_reset (Scsi_Cmnd *cmd, unsigned int reset_flags)
{
printk ("simscsi_reset: unimplemented\n");
return SCSI_RESET_SUCCESS;
}
int int
simscsi_biosparam (struct scsi_device *sdev, struct block_device *n, simscsi_biosparam (struct scsi_device *sdev, struct block_device *n,
sector_t capacity, int ip[]) sector_t capacity, int ip[])
......
...@@ -21,20 +21,18 @@ extern int simscsi_biosparam (struct scsi_device *, struct block_device *, ...@@ -21,20 +21,18 @@ extern int simscsi_biosparam (struct scsi_device *, struct block_device *,
sector_t, int[]); sector_t, int[]);
#define SIMSCSI { \ #define SIMSCSI { \
detect: simscsi_detect, \ .detect = simscsi_detect, \
release: simscsi_release, \ .release = simscsi_release, \
info: simscsi_info, \ .info = simscsi_info, \
queuecommand: simscsi_queuecommand, \ .queuecommand = simscsi_queuecommand, \
abort: simscsi_abort, \ .bios_param = simscsi_biosparam, \
reset: simscsi_reset, \ .can_queue = SIMSCSI_REQ_QUEUE_LEN, \
bios_param: simscsi_biosparam, \ .this_id = -1, \
can_queue: SIMSCSI_REQ_QUEUE_LEN, \ .sg_tablesize = SG_ALL, \
this_id: -1, \ .cmd_per_lun = SIMSCSI_REQ_QUEUE_LEN, \
sg_tablesize: SG_ALL, \ .present = 0, \
cmd_per_lun: SIMSCSI_REQ_QUEUE_LEN, \ .unchecked_isa_dma = 0, \
present: 0, \ .use_clustering = DISABLE_CLUSTERING \
unchecked_isa_dma: 0, \
use_clustering: DISABLE_CLUSTERING \
} }
#endif /* SIMSCSI_H */ #endif /* SIMSCSI_H */
...@@ -1245,15 +1245,15 @@ sys_call_table: ...@@ -1245,15 +1245,15 @@ sys_call_table:
data8 sys_alloc_hugepages data8 sys_alloc_hugepages
data8 sys_free_hugepages // 1235 data8 sys_free_hugepages // 1235
data8 sys_exit_group data8 sys_exit_group
data8 ia64_ni_syscall data8 sys_lookup_dcookie
data8 sys_io_setup data8 sys_io_setup
data8 sys_io_destroy data8 sys_io_destroy
data8 sys_io_getevents // 1240 data8 sys_io_getevents // 1240
data8 sys_io_submit data8 sys_io_submit
data8 sys_io_cancel data8 sys_io_cancel
data8 ia64_ni_syscall data8 sys_epoll_create
data8 ia64_ni_syscall data8 sys_epoll_ctl
data8 ia64_ni_syscall // 1245 data8 sys_epoll_wait // 1245
data8 ia64_ni_syscall data8 ia64_ni_syscall
data8 ia64_ni_syscall data8 ia64_ni_syscall
data8 ia64_ni_syscall data8 ia64_ni_syscall
......
...@@ -625,21 +625,18 @@ cpu_init (void) ...@@ -625,21 +625,18 @@ cpu_init (void)
extern char __per_cpu_end[]; extern char __per_cpu_end[];
int cpu; int cpu;
if (__per_cpu_end - __per_cpu_start > PAGE_SIZE)
panic("Per-cpu data area too big! (%Zu > %Zu)",
__per_cpu_end - __per_cpu_start, PAGE_SIZE);
/* /*
* get_free_pages() cannot be used before cpu_init() done. BSP allocates * get_free_pages() cannot be used before cpu_init() done. BSP allocates
* "NR_CPUS" pages for all CPUs to avoid that AP calls get_zeroed_page(). * "NR_CPUS" pages for all CPUs to avoid that AP calls get_zeroed_page().
*/ */
if (smp_processor_id() == 0) { if (smp_processor_id() == 0) {
cpu_data = (unsigned long)alloc_bootmem_pages(PAGE_SIZE * NR_CPUS); cpu_data = (unsigned long) __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS,
PERCPU_PAGE_SIZE,
__pa(MAX_DMA_ADDRESS));
for (cpu = 0; cpu < NR_CPUS; cpu++) { for (cpu = 0; cpu < NR_CPUS; cpu++) {
memcpy(cpu_data, __phys_per_cpu_start, __per_cpu_end - __per_cpu_start); memcpy(cpu_data, __phys_per_cpu_start, __per_cpu_end - __per_cpu_start);
__per_cpu_offset[cpu] = (char *) cpu_data - __per_cpu_start; __per_cpu_offset[cpu] = (char *) cpu_data - __per_cpu_start;
cpu_data += PAGE_SIZE; cpu_data += PERCPU_PAGE_SIZE;
} }
} }
cpu_data = __per_cpu_start + __per_cpu_offset[smp_processor_id()]; cpu_data = __per_cpu_start + __per_cpu_offset[smp_processor_id()];
...@@ -650,7 +647,6 @@ cpu_init (void) ...@@ -650,7 +647,6 @@ cpu_init (void)
cpu_info = cpu_data + ((char *) &__get_cpu_var(cpu_info) - __per_cpu_start); cpu_info = cpu_data + ((char *) &__get_cpu_var(cpu_info) - __per_cpu_start);
#ifdef CONFIG_NUMA #ifdef CONFIG_NUMA
cpu_info->node_data = get_node_data_ptr(); cpu_info->node_data = get_node_data_ptr();
cpu_info->nodeid = boot_get_local_nodeid();
#endif #endif
/* /*
......
...@@ -430,30 +430,39 @@ smp_build_cpu_map (void) ...@@ -430,30 +430,39 @@ smp_build_cpu_map (void)
#ifdef CONFIG_NUMA #ifdef CONFIG_NUMA
char cpu_to_node_map[NR_CPUS] __cacheline_aligned; /* on which node is each logical CPU (one cacheline even for 64 CPUs) */
volatile char cpu_to_node_map[NR_CPUS] __cacheline_aligned;
/* which logical CPUs are on which nodes */
volatile unsigned long node_to_cpu_mask[MAX_NUMNODES] __cacheline_aligned;
/* /*
* Build cpu to node mapping. * Build cpu to node mapping and initialize the per node cpu masks.
*/ */
void __init void __init
build_cpu_to_node_map (void) build_cpu_to_node_map (void)
{ {
int cpu, i; int cpu, i, node;
for(node=0; node<MAX_NUMNODES; node++)
node_to_cpu_mask[node] = 0;
for(cpu = 0; cpu < NR_CPUS; ++cpu) { for(cpu = 0; cpu < NR_CPUS; ++cpu) {
/* /*
* All Itanium NUMA platforms I know use ACPI, so maybe we * All Itanium NUMA platforms I know use ACPI, so maybe we
* can drop this ifdef completely. [EF] * can drop this ifdef completely. [EF]
*/ */
#ifdef CONFIG_ACPI_NUMA #ifdef CONFIG_ACPI_NUMA
node = -1;
for (i = 0; i < NR_CPUS; ++i) for (i = 0; i < NR_CPUS; ++i)
if (cpu_physical_id(cpu) == node_cpuid[i].phys_id) { if (cpu_physical_id(cpu) == node_cpuid[i].phys_id) {
cpu_to_node_map[cpu] = node_cpuid[i].nid; node = node_cpuid[i].nid;
break; break;
} }
#else #else
# error Fixme: Dunno how to build CPU-to-node map. # error Fixme: Dunno how to build CPU-to-node map.
#endif #endif
cpu_to_node_map[cpu] = node;
if (node >= 0)
node_to_cpu_mask[node] |= (1UL << cpu);
} }
} }
......
...@@ -287,7 +287,8 @@ ia64_mmu_init (void *my_cpu_data) ...@@ -287,7 +287,8 @@ ia64_mmu_init (void *my_cpu_data)
ia64_srlz_d(); ia64_srlz_d();
ia64_itr(0x2, IA64_TR_PERCPU_DATA, PERCPU_ADDR, ia64_itr(0x2, IA64_TR_PERCPU_DATA, PERCPU_ADDR,
pte_val(pfn_pte(__pa(my_cpu_data) >> PAGE_SHIFT, PAGE_KERNEL)), PAGE_SHIFT); pte_val(pfn_pte(__pa(my_cpu_data) >> PAGE_SHIFT, PAGE_KERNEL)),
PERCPU_PAGE_SHIFT);
ia64_set_psr(psr); ia64_set_psr(psr);
ia64_srlz_i(); ia64_srlz_i();
...@@ -455,8 +456,6 @@ mem_init (void) ...@@ -455,8 +456,6 @@ mem_init (void)
if (num_pgt_pages > pgt_cache_water[1]) if (num_pgt_pages > pgt_cache_water[1])
pgt_cache_water[1] = num_pgt_pages; pgt_cache_water[1] = num_pgt_pages;
show_mem();
/* install the gate page in the global page table: */ /* install the gate page in the global page table: */
put_gate_page(virt_to_page(__start_gate_section), GATE_ADDR); put_gate_page(virt_to_page(__start_gate_section), GATE_ADDR);
......
...@@ -137,7 +137,7 @@ SECTIONS ...@@ -137,7 +137,7 @@ SECTIONS
{ *(.kstrtab) } { *(.kstrtab) }
/* Per-cpu data: */ /* Per-cpu data: */
. = ALIGN(PAGE_SIZE); . = ALIGN(PERCPU_PAGE_SIZE);
__phys_per_cpu_start = .; __phys_per_cpu_start = .;
.data.percpu PERCPU_ADDR : AT(__phys_per_cpu_start - PAGE_OFFSET) .data.percpu PERCPU_ADDR : AT(__phys_per_cpu_start - PAGE_OFFSET)
{ {
...@@ -145,7 +145,7 @@ SECTIONS ...@@ -145,7 +145,7 @@ SECTIONS
*(.data.percpu) *(.data.percpu)
__per_cpu_end = .; __per_cpu_end = .;
} }
. = __phys_per_cpu_start + 4096; /* ensure percpu fits into smallest page size (4KB) */ . = __phys_per_cpu_start + PERCPU_PAGE_SIZE; /* ensure percpu data fits into percpu page size */
.data : AT(ADDR(.data) - PAGE_OFFSET) .data : AT(ADDR(.data) - PAGE_OFFSET)
{ *(.data) *(.gnu.linkonce.d*) CONSTRUCTORS } { *(.data) *(.gnu.linkonce.d*) CONSTRUCTORS }
......
...@@ -83,6 +83,7 @@ ide_init_default_hwifs (void) ...@@ -83,6 +83,7 @@ ide_init_default_hwifs (void)
int index; int index;
for(index = 0; index < MAX_HWIFS; index++) { for(index = 0; index < MAX_HWIFS; index++) {
memset(&hw, 0, sizeof hw);
ide_init_hwif_ports(&hw, ide_default_io_base(index), 0, NULL); ide_init_hwif_ports(&hw, ide_default_io_base(index), 0, NULL);
hw.irq = ide_default_irq(ide_default_io_base(index)); hw.irq = ide_default_irq(ide_default_io_base(index));
ide_register_hw(&hw, NULL); ide_register_hw(&hw, NULL);
......
...@@ -21,7 +21,9 @@ ...@@ -21,7 +21,9 @@
# define NR_MEMBLKS (NR_NODES * 8) # define NR_MEMBLKS (NR_NODES * 8)
#endif #endif
extern char cpu_to_node_map[NR_CPUS] __cacheline_aligned; #include <linux/cache.h>
extern volatile char cpu_to_node_map[NR_CPUS] __cacheline_aligned;
extern volatile unsigned long node_to_cpu_mask[NR_NODES] __cacheline_aligned;
/* Stuff below this line could be architecture independent */ /* Stuff below this line could be architecture independent */
......
...@@ -30,6 +30,9 @@ ...@@ -30,6 +30,9 @@
#define PAGE_MASK (~(PAGE_SIZE - 1)) #define PAGE_MASK (~(PAGE_SIZE - 1))
#define PAGE_ALIGN(addr) (((addr) + PAGE_SIZE - 1) & PAGE_MASK) #define PAGE_ALIGN(addr) (((addr) + PAGE_SIZE - 1) & PAGE_MASK)
#define PERCPU_PAGE_SHIFT 16 /* log2() of max. size of per-CPU area */
#define PERCPU_PAGE_SIZE (__IA64_UL_CONST(1) << PERCPU_PAGE_SHIFT)
#ifdef CONFIG_HUGETLB_PAGE #ifdef CONFIG_HUGETLB_PAGE
# if defined(CONFIG_HUGETLB_PAGE_SIZE_4GB) # if defined(CONFIG_HUGETLB_PAGE_SIZE_4GB)
......
...@@ -202,7 +202,7 @@ ia64_phys_addr_valid (unsigned long addr) ...@@ -202,7 +202,7 @@ ia64_phys_addr_valid (unsigned long addr)
#define RGN_MAP_LIMIT ((1UL << (4*PAGE_SHIFT - 12)) - PAGE_SIZE) /* per region addr limit */ #define RGN_MAP_LIMIT ((1UL << (4*PAGE_SHIFT - 12)) - PAGE_SIZE) /* per region addr limit */
#define RGN_KERNEL 7 #define RGN_KERNEL 7
#define VMALLOC_START (0xa000000000000000 + 3*PAGE_SIZE) #define VMALLOC_START (0xa000000000000000 + 3*PERCPU_PAGE_SIZE)
#define VMALLOC_VMADDR(x) ((unsigned long)(x)) #define VMALLOC_VMADDR(x) ((unsigned long)(x))
#define VMALLOC_END (0xa000000000000000 + (1UL << (4*PAGE_SHIFT - 9))) #define VMALLOC_END (0xa000000000000000 + (1UL << (4*PAGE_SHIFT - 9)))
......
...@@ -4,8 +4,8 @@ ...@@ -4,8 +4,8 @@
/* /*
* poll(2) bit definitions. Chosen to be compatible with Linux/x86. * poll(2) bit definitions. Chosen to be compatible with Linux/x86.
* *
* Copyright (C) 1998, 1999 Hewlett-Packard Co * Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co
* Copyright (C) 1998, 1999 David Mosberger-Tang <davidm@hpl.hp.com> * David Mosberger-Tang <davidm@hpl.hp.com>
*/ */
#define POLLIN 0x0001 #define POLLIN 0x0001
...@@ -20,6 +20,7 @@ ...@@ -20,6 +20,7 @@
#define POLLWRNORM 0x0100 #define POLLWRNORM 0x0100
#define POLLWRBAND 0x0200 #define POLLWRBAND 0x0200
#define POLLMSG 0x0400 #define POLLMSG 0x0400
#define POLLREMOVE 0x1000
struct pollfd { struct pollfd {
int fd; int fd;
......
...@@ -179,7 +179,6 @@ struct cpuinfo_ia64 { ...@@ -179,7 +179,6 @@ struct cpuinfo_ia64 {
#endif #endif
#ifdef CONFIG_NUMA #ifdef CONFIG_NUMA
struct ia64_node_data *node_data; struct ia64_node_data *node_data;
int nodeid;
#endif #endif
}; };
...@@ -192,10 +191,6 @@ DECLARE_PER_CPU(struct cpuinfo_ia64, cpu_info); ...@@ -192,10 +191,6 @@ DECLARE_PER_CPU(struct cpuinfo_ia64, cpu_info);
#define local_cpu_data (&__get_cpu_var(cpu_info)) #define local_cpu_data (&__get_cpu_var(cpu_info))
#define cpu_data(cpu) (&per_cpu(cpu_info, cpu)) #define cpu_data(cpu) (&per_cpu(cpu_info, cpu))
#ifdef CONFIG_NUMA
#define numa_node_id() (local_cpu_data->nodeid)
#endif
extern void identify_cpu (struct cpuinfo_ia64 *); extern void identify_cpu (struct cpuinfo_ia64 *);
extern void print_cpu_info (struct cpuinfo_ia64 *); extern void print_cpu_info (struct cpuinfo_ia64 *);
......
...@@ -20,8 +20,9 @@ ...@@ -20,8 +20,9 @@
#define KERNEL_START (PAGE_OFFSET + 68*1024*1024) #define KERNEL_START (PAGE_OFFSET + 68*1024*1024)
#define GATE_ADDR (0xa000000000000000 + PAGE_SIZE) /* 0xa000000000000000 - 0xa000000000000000+PERCPU_MAX_SIZE remain unmapped */
#define PERCPU_ADDR (0xa000000000000000 + 2*PAGE_SIZE) #define PERCPU_ADDR (0xa000000000000000 + PERCPU_PAGE_SIZE)
#define GATE_ADDR (0xa000000000000000 + 2*PERCPU_PAGE_SIZE)
#ifndef __ASSEMBLY__ #ifndef __ASSEMBLY__
......
...@@ -15,12 +15,22 @@ ...@@ -15,12 +15,22 @@
#include <asm/acpi.h> #include <asm/acpi.h>
#include <asm/numa.h> #include <asm/numa.h>
#include <asm/smp.h>
/* Returns the number of the node containing CPU 'cpu' */
#ifdef CONFIG_NUMA #ifdef CONFIG_NUMA
#define __cpu_to_node(cpu) cpu_to_node_map[cpu] /*
* Returns the number of the node containing CPU 'cpu'
*/
#define __cpu_to_node(cpu) (int)(cpu_to_node_map[cpu])
/*
* Returns a bitmask of CPUs on Node 'node'.
*/
#define __node_to_cpu_mask(node) (node_to_cpu_mask[node])
#else #else
#define __cpu_to_node(cpu) (0) #define __cpu_to_node(cpu) (0)
#define __node_to_cpu_mask(node) (phys_cpu_present_map)
#endif #endif
/* /*
...@@ -41,34 +51,8 @@ ...@@ -41,34 +51,8 @@
/* /*
* Returns the number of the first CPU on Node 'node'. * Returns the number of the first CPU on Node 'node'.
* Slow in the current implementation.
* Who needs this?
*/ */
/* #define __node_to_first_cpu(node) pool_cpus[pool_ptr[node]] */ #define __node_to_first_cpu(node) (__ffs(__node_to_cpu_mask(node)))
static inline int __node_to_first_cpu(int node)
{
int i;
for (i=0; i<NR_CPUS; i++)
if (__cpu_to_node(i)==node)
return i;
BUG(); /* couldn't find a cpu on given node */
return -1;
}
/*
* Returns a bitmask of CPUs on Node 'node'.
*/
static inline unsigned long __node_to_cpu_mask(int node)
{
int cpu;
unsigned long mask = 0UL;
for(cpu=0; cpu<NR_CPUS; cpu++)
if (__cpu_to_node(cpu) == node)
mask |= 1UL << cpu;
return mask;
}
/* /*
* Returns the number of the first MemBlk on Node 'node' * Returns the number of the first MemBlk on Node 'node'
......
...@@ -226,12 +226,15 @@ ...@@ -226,12 +226,15 @@
#define __NR_alloc_hugepages 1234 #define __NR_alloc_hugepages 1234
#define __NR_free_hugepages 1235 #define __NR_free_hugepages 1235
#define __NR_exit_group 1236 #define __NR_exit_group 1236
/* 1237 currently unused */ #define __NR_lookup_dcookie 1237
#define __NR_io_setup 1238 #define __NR_io_setup 1238
#define __NR_io_destroy 1239 #define __NR_io_destroy 1239
#define __NR_io_getevents 1240 #define __NR_io_getevents 1240
#define __NR_io_submit 1241 #define __NR_io_submit 1241
#define __NR_io_cancel 1242 #define __NR_io_cancel 1242
#define __NR_epoll_create 1243
#define __NR_epoll_ctl 1244
#define __NR_epoll_wait 1245
#if !defined(__ASSEMBLY__) && !defined(ASSEMBLER) #if !defined(__ASSEMBLY__) && !defined(ASSEMBLER)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment