net: ethernet: mtk_eth_soc: fix DSA TX tag hwaccel for switch port 0
Arınç reports that on his MT7621AT Unielec U7621-06 board and MT7623NI Bananapi BPI-R2, packets received by the CPU over mt7530 switch port 0 (of which this driver acts as the DSA master) are not processed correctly by software. More precisely, they arrive without a DSA tag (in packet or in the hwaccel area - skb_metadata_dst()), so DSA cannot demux them towards the switch's interface for port 0. Traffic from other ports receives a skb_metadata_dst() with the correct port and is demuxed properly. Looking at mtk_poll_rx(), it becomes apparent that this driver uses the skb vlan hwaccel area: union { u32 vlan_all; struct { __be16 vlan_proto; __u16 vlan_tci; }; }; as a temporary storage for the VLAN hwaccel tag, or the DSA hwaccel tag. If this is a DSA master it's a DSA hwaccel tag, and finally clears up the skb VLAN hwaccel header. I'm guessing that the problem is the (mis)use of API. skb_vlan_tag_present() looks like this: #define skb_vlan_tag_present(__skb) (!!(__skb)->vlan_all) So if both vlan_proto and vlan_tci are zeroes, skb_vlan_tag_present() returns precisely false. I don't know for sure what is the format of the DSA hwaccel tag, but I surely know that lowermost 3 bits of vlan_proto are 0 when receiving from port 0: unsigned int port = vlan_proto & GENMASK(2, 0); If the RX descriptor has no other bits set to non-zero values in RX_DMA_VTAG, then the call to __vlan_hwaccel_put_tag() will not, in fact, make the subsequent skb_vlan_tag_present() return true, because it's implemented like this: static inline void __vlan_hwaccel_put_tag(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci) { skb->vlan_proto = vlan_proto; skb->vlan_tci = vlan_tci; } What we need to do to fix this problem (assuming this is the problem) is to stop using skb->vlan_all as temporary storage for driver affairs, and just create some local variables that serve the same purpose, but hopefully better. Instead of calling skb_vlan_tag_present(), let's look at a boolean has_hwaccel_tag which we set to true when the RX DMA descriptors have something. Disambiguate based on netdev_uses_dsa() whether this is a VLAN or DSA hwaccel tag, and only call __vlan_hwaccel_put_tag() if we're certain it's a VLAN tag. Arınç confirms that the treatment works, so this validates the assumption. Link: https://lore.kernel.org/netdev/704f3a72-fc9e-714a-db54-272e17612637@arinc9.com/ Fixes: 2d7605a7 ("net: ethernet: mtk_eth_soc: enable hardware DSA untagging") Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: David S. Miller <davem@davemloft.net>
Showing
Please register or sign in to comment