ath9k_hw: remove IS_CHAN_B()

Hardware 802.11b-only mode isn't supported by the driver (the device is
configured for 802.11n/g instead). Simplify the code by removing checks
for it.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/ar5008_phy.c

@@ -794,8 +794,10 @@ static void ar5008_hw_set_rfmode(struct ath_hw *ah, struct ath9k_channel *chan)
 	if (chan == NULL)
 		return;
 
-	rfMode |= (IS_CHAN_B(chan) || IS_CHAN_G(chan))
-		? AR_PHY_MODE_DYNAMIC : AR_PHY_MODE_OFDM;
+	if (IS_CHAN_2GHZ(chan))
+		rfMode |= AR_PHY_MODE_DYNAMIC;
+	else
+		rfMode |= AR_PHY_MODE_OFDM;
 
 	if (!AR_SREV_9280_20_OR_LATER(ah))
 		rfMode |= (IS_CHAN_5GHZ(chan)) ?

drivers/net/wireless/ath/ath9k/ar9002_calib.c

@@ -33,15 +33,12 @@ static bool ar9002_hw_is_cal_supported(struct ath_hw *ah,
 	bool supported = false;
 	switch (ah->supp_cals & cal_type) {
 	case IQ_MISMATCH_CAL:
-		/* Run IQ Mismatch for non-CCK only */
-		if (!IS_CHAN_B(chan))
 		supported = true;
 		break;
 	case ADC_GAIN_CAL:
 	case ADC_DC_CAL:
 		/* Run ADC Gain Cal for non-CCK & non 2GHz-HT20 only */
-		if (!IS_CHAN_B(chan) &&
-		    !((IS_CHAN_2GHZ(chan) || IS_CHAN_A_FAST_CLOCK(ah, chan)) &&
+		if (!((IS_CHAN_2GHZ(chan) || IS_CHAN_A_FAST_CLOCK(ah, chan)) &&
 		      IS_CHAN_HT20(chan)))
 			supported = true;
 		break;

drivers/net/wireless/ath/ath9k/ar9003_phy.c

@@ -808,8 +808,10 @@ static void ar9003_hw_set_rfmode(struct ath_hw *ah,
 	if (chan == NULL)
 		return;
 
-	rfMode |= (IS_CHAN_B(chan) || IS_CHAN_G(chan))
-		? AR_PHY_MODE_DYNAMIC : AR_PHY_MODE_OFDM;
+	if (IS_CHAN_2GHZ(chan))
+		rfMode |= AR_PHY_MODE_DYNAMIC;
+	else
+		rfMode |= AR_PHY_MODE_OFDM;
 
 	if (IS_CHAN_A_FAST_CLOCK(ah, chan))
 		rfMode |= (AR_PHY_MODE_DYNAMIC | AR_PHY_MODE_DYN_CCK_DISABLE);

drivers/net/wireless/ath/ath9k/hw.c

@@ -190,9 +190,6 @@ EXPORT_SYMBOL(ath9k_hw_wait);
 void ath9k_hw_synth_delay(struct ath_hw *ah, struct ath9k_channel *chan,
 			  int hw_delay)
 {
-	if (IS_CHAN_B(chan))
-		hw_delay = (4 * hw_delay) / 22;
-	else
 	hw_delay /= 10;
 
 	if (IS_CHAN_HALF_RATE(chan))
@@ -1159,9 +1156,7 @@ u32 ath9k_regd_get_ctl(struct ath_regulatory *reg, struct ath9k_channel *chan)
 {
 	u32 ctl = ath_regd_get_band_ctl(reg, chan->chan->band);
 
-	if (IS_CHAN_B(chan))
-		ctl |= CTL_11B;
-	else if (IS_CHAN_G(chan))
+	if (IS_CHAN_G(chan))
 		ctl |= CTL_11G;
 	else
 		ctl |= CTL_11A;

drivers/net/wireless/ath/ath9k/hw.h

@@ -455,7 +455,6 @@ struct ath9k_channel {
 	 ((_ah)->caps.hw_caps & ATH9K_HW_CAP_FASTCLOCK))
 
 /* These macros check chanmode and not channelFlags */
-#define IS_CHAN_B(_c) ((_c)->chanmode == CHANNEL_B)
 #define IS_CHAN_HT20(_c) (((_c)->chanmode == CHANNEL_A_HT20) ||	\
 			  ((_c)->chanmode == CHANNEL_G_HT20))
 #define IS_CHAN_HT40(_c) (((_c)->chanmode == CHANNEL_A_HT40PLUS) ||	\

drivers/net/wireless/ath/ath9k/mac.c

@@ -374,7 +374,6 @@ EXPORT_SYMBOL(ath9k_hw_releasetxqueue);
 bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
-	struct ath9k_channel *chan = ah->curchan;
 	struct ath9k_tx_queue_info *qi;
 	u32 cwMin, chanCwMin, value;
 
@@ -387,9 +386,6 @@ bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q)
 	ath_dbg(common, QUEUE, "Reset TX queue: %u\n", q);
 
 	if (qi->tqi_cwmin == ATH9K_TXQ_USEDEFAULT) {
-		if (chan && IS_CHAN_B(chan))
-			chanCwMin = INIT_CWMIN_11B;
-		else
 		chanCwMin = INIT_CWMIN;
 
 		for (cwMin = 1; cwMin < chanCwMin; cwMin = (cwMin << 1) | 1);