Commit 1bad9ce1 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'sh-for-4.17' of git://git.libc.org/linux-sh

Pull arch/sh updates from Rich Felker:
 "Fixes for bugs in futex, device tree, and userspace breakpoint traps,
  and for PCI issues on SH7786"

* tag 'sh-for-4.17' of git://git.libc.org/linux-sh:
  arch/sh: pcie-sh7786: handle non-zero DMA offset
  arch/sh: pcie-sh7786: adjust the memory mapping
  arch/sh: pcie-sh7786: adjust PCI MEM and IO regions
  arch/sh: pcie-sh7786: exclude unusable PCI MEM areas
  arch/sh: pcie-sh7786: mark unavailable PCI resource as disabled
  arch/sh: pci: don't use disabled resources
  arch/sh: make the DMA mapping operations observe dev->dma_pfn_offset
  arch/sh: add sh7786_mm_sel() function
  sh: fix debug trap failure to process signals before return to user
  sh: fix memory corruption of unflattened device tree
  sh: fix futex FUTEX_OP_SET op on userspace addresses
parents e4e57f20 bf9c7e3d
......@@ -126,12 +126,6 @@ static void __init sh_of_setup(char **cmdline_p)
{
struct device_node *root;
#ifdef CONFIG_USE_BUILTIN_DTB
unflatten_and_copy_device_tree();
#else
unflatten_device_tree();
#endif
board_time_init = sh_of_time_init;
sh_mv.mv_name = "Unknown SH model";
......
......@@ -49,6 +49,8 @@ static void pcibios_scanbus(struct pci_channel *hose)
for (i = 0; i < hose->nr_resources; i++) {
res = hose->resources + i;
offset = 0;
if (res->flags & IORESOURCE_DISABLED)
continue;
if (res->flags & IORESOURCE_IO)
offset = hose->io_offset;
else if (res->flags & IORESOURCE_MEM)
......@@ -102,6 +104,9 @@ int register_pci_controller(struct pci_channel *hose)
for (i = 0; i < hose->nr_resources; i++) {
struct resource *res = hose->resources + i;
if (res->flags & IORESOURCE_DISABLED)
continue;
if (res->flags & IORESOURCE_IO) {
if (request_resource(&ioport_resource, res) < 0)
goto out;
......
......@@ -19,6 +19,7 @@
#include <linux/clk.h>
#include <linux/sh_clk.h>
#include <linux/sh_intc.h>
#include <cpu/sh7786.h>
#include "pcie-sh7786.h"
#include <asm/sizes.h>
......@@ -32,6 +33,7 @@ struct sh7786_pcie_port {
static struct sh7786_pcie_port *sh7786_pcie_ports;
static unsigned int nr_ports;
static unsigned long dma_pfn_offset;
static struct sh7786_pcie_hwops {
int (*core_init)(void);
......@@ -40,73 +42,73 @@ static struct sh7786_pcie_hwops {
static struct resource sh7786_pci0_resources[] = {
{
.name = "PCIe0 IO",
.name = "PCIe0 MEM 0",
.start = 0xfd000000,
.end = 0xfd000000 + SZ_8M - 1,
.flags = IORESOURCE_IO,
.flags = IORESOURCE_MEM,
}, {
.name = "PCIe0 MEM 0",
.name = "PCIe0 MEM 1",
.start = 0xc0000000,
.end = 0xc0000000 + SZ_512M - 1,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
}, {
.name = "PCIe0 MEM 1",
.name = "PCIe0 MEM 2",
.start = 0x10000000,
.end = 0x10000000 + SZ_64M - 1,
.flags = IORESOURCE_MEM,
}, {
.name = "PCIe0 MEM 2",
.name = "PCIe0 IO",
.start = 0xfe100000,
.end = 0xfe100000 + SZ_1M - 1,
.flags = IORESOURCE_MEM,
.flags = IORESOURCE_IO,
},
};
static struct resource sh7786_pci1_resources[] = {
{
.name = "PCIe1 IO",
.name = "PCIe1 MEM 0",
.start = 0xfd800000,
.end = 0xfd800000 + SZ_8M - 1,
.flags = IORESOURCE_IO,
.flags = IORESOURCE_MEM,
}, {
.name = "PCIe1 MEM 0",
.name = "PCIe1 MEM 1",
.start = 0xa0000000,
.end = 0xa0000000 + SZ_512M - 1,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
}, {
.name = "PCIe1 MEM 1",
.name = "PCIe1 MEM 2",
.start = 0x30000000,
.end = 0x30000000 + SZ_256M - 1,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
}, {
.name = "PCIe1 MEM 2",
.name = "PCIe1 IO",
.start = 0xfe300000,
.end = 0xfe300000 + SZ_1M - 1,
.flags = IORESOURCE_MEM,
.flags = IORESOURCE_IO,
},
};
static struct resource sh7786_pci2_resources[] = {
{
.name = "PCIe2 IO",
.name = "PCIe2 MEM 0",
.start = 0xfc800000,
.end = 0xfc800000 + SZ_4M - 1,
.flags = IORESOURCE_IO,
.flags = IORESOURCE_MEM,
}, {
.name = "PCIe2 MEM 0",
.name = "PCIe2 MEM 1",
.start = 0x80000000,
.end = 0x80000000 + SZ_512M - 1,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
}, {
.name = "PCIe2 MEM 1",
.name = "PCIe2 MEM 2",
.start = 0x20000000,
.end = 0x20000000 + SZ_256M - 1,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
}, {
.name = "PCIe2 MEM 2",
.name = "PCIe2 IO",
.start = 0xfcd00000,
.end = 0xfcd00000 + SZ_1M - 1,
.flags = IORESOURCE_MEM,
.flags = IORESOURCE_IO,
},
};
......@@ -301,7 +303,7 @@ static int __init pcie_init(struct sh7786_pcie_port *port)
{
struct pci_channel *chan = port->hose;
unsigned int data;
phys_addr_t memphys;
phys_addr_t memstart, memend;
size_t memsize;
int ret, i, win;
......@@ -357,15 +359,26 @@ static int __init pcie_init(struct sh7786_pcie_port *port)
data |= (0xff << 16);
pci_write_reg(chan, data, SH4A_PCIEMACCTLR);
memphys = __pa(memory_start);
memsize = roundup_pow_of_two(memory_end - memory_start);
memstart = __pa(memory_start);
memend = __pa(memory_end);
memsize = roundup_pow_of_two(memend - memstart);
/*
* The start address must be aligned on its size. So we round
* it down, and then recalculate the size so that it covers
* the entire memory.
*/
memstart = ALIGN_DOWN(memstart, memsize);
memsize = roundup_pow_of_two(memend - memstart);
dma_pfn_offset = memstart >> PAGE_SHIFT;
/*
* If there's more than 512MB of memory, we need to roll over to
* LAR1/LAMR1.
*/
if (memsize > SZ_512M) {
pci_write_reg(chan, memphys + SZ_512M, SH4A_PCIELAR1);
pci_write_reg(chan, memstart + SZ_512M, SH4A_PCIELAR1);
pci_write_reg(chan, ((memsize - SZ_512M) - SZ_256) | 1,
SH4A_PCIELAMR1);
memsize = SZ_512M;
......@@ -381,7 +394,7 @@ static int __init pcie_init(struct sh7786_pcie_port *port)
* LAR0/LAMR0 covers up to the first 512MB, which is enough to
* cover all of lowmem on most platforms.
*/
pci_write_reg(chan, memphys, SH4A_PCIELAR0);
pci_write_reg(chan, memstart, SH4A_PCIELAR0);
pci_write_reg(chan, (memsize - SZ_256) | 1, SH4A_PCIELAMR0);
/* Finish initialization */
......@@ -438,6 +451,9 @@ static int __init pcie_init(struct sh7786_pcie_port *port)
* mode, so just skip them entirely.
*/
if ((res->flags & IORESOURCE_MEM_32BIT) && __in_29bit_mode())
res->flags |= IORESOURCE_DISABLED;
if (res->flags & IORESOURCE_DISABLED)
continue;
pci_write_reg(chan, 0x00000000, SH4A_PCIEPTCTLR(win));
......@@ -472,6 +488,11 @@ int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
return evt2irq(0xae0);
}
void pcibios_bus_add_device(struct pci_dev *pdev)
{
pdev->dev.dma_pfn_offset = dma_pfn_offset;
}
static int __init sh7786_pcie_core_init(void)
{
/* Return the number of ports */
......@@ -527,6 +548,7 @@ static struct sh7786_pcie_hwops sh7786_65nm_pcie_hwops __initdata = {
static int __init sh7786_pcie_init(void)
{
struct clk *platclk;
u32 mm_sel;
int i;
printk(KERN_NOTICE "PCI: Starting initialization.\n");
......@@ -560,6 +582,16 @@ static int __init sh7786_pcie_init(void)
clk_enable(platclk);
mm_sel = sh7786_mm_sel();
/*
* Depending on the MMSELR register value, the PCIe0 MEM 1
* area may not be available. See Table 13.11 of the SH7786
* datasheet.
*/
if (mm_sel != 1 && mm_sel != 2 && mm_sel != 5 && mm_sel != 6)
sh7786_pci0_resources[2].flags |= IORESOURCE_DISABLED;
printk(KERN_NOTICE "PCI: probing %d ports.\n", nr_ports);
for (i = 0; i < nr_ports; i++) {
......
......@@ -37,9 +37,6 @@ static inline int arch_futex_atomic_op_inuser(int op, u32 oparg, int *oval,
pagefault_disable();
do {
if (op == FUTEX_OP_SET)
ret = oldval = 0;
else
ret = get_user(oldval, uaddr);
if (ret) break;
......
......@@ -14,6 +14,8 @@
#ifndef __CPU_SH7786_H__
#define __CPU_SH7786_H__
#include <linux/io.h>
enum {
/* PA */
GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
......@@ -131,4 +133,9 @@ enum {
GPIO_FN_IRL7, GPIO_FN_IRL6, GPIO_FN_IRL5, GPIO_FN_IRL4,
};
static inline u32 sh7786_mm_sel(void)
{
return __raw_readl(0xFC400020) & 0x7;
}
#endif /* __CPU_SH7786_H__ */
......@@ -16,7 +16,8 @@ static dma_addr_t nommu_map_page(struct device *dev, struct page *page,
enum dma_data_direction dir,
unsigned long attrs)
{
dma_addr_t addr = page_to_phys(page) + offset;
dma_addr_t addr = page_to_phys(page) + offset
- PFN_PHYS(dev->dma_pfn_offset);
WARN_ON(size == 0);
......@@ -36,12 +37,14 @@ static int nommu_map_sg(struct device *dev, struct scatterlist *sg,
WARN_ON(nents == 0 || sg[0].length == 0);
for_each_sg(sg, s, nents, i) {
dma_addr_t offset = PFN_PHYS(dev->dma_pfn_offset);
BUG_ON(!sg_page(s));
if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
sh_sync_dma_for_device(sg_virt(s), s->length, dir);
s->dma_address = sg_phys(s);
s->dma_address = sg_phys(s) - offset;
s->dma_length = s->length;
}
......
......@@ -255,7 +255,7 @@ debug_trap:
mov.l @r8, r8
jsr @r8
nop
bra __restore_all
bra ret_from_exception
nop
CFI_ENDPROC
......
......@@ -330,6 +330,14 @@ void __init setup_arch(char **cmdline_p)
/* Let earlyprintk output early console messages */
early_platform_driver_probe("earlyprintk", 1, 1);
#ifdef CONFIG_OF_FLATTREE
#ifdef CONFIG_USE_BUILTIN_DTB
unflatten_and_copy_device_tree();
#else
unflatten_device_tree();
#endif
#endif
paging_init();
#ifdef CONFIG_DUMMY_CONSOLE
......
......@@ -59,7 +59,7 @@ void *dma_generic_alloc_coherent(struct device *dev, size_t size,
split_page(pfn_to_page(virt_to_phys(ret) >> PAGE_SHIFT), order);
*dma_handle = virt_to_phys(ret);
*dma_handle = virt_to_phys(ret) - PFN_PHYS(dev->dma_pfn_offset);
return ret_nocache;
}
......@@ -69,7 +69,7 @@ void dma_generic_free_coherent(struct device *dev, size_t size,
unsigned long attrs)
{
int order = get_order(size);
unsigned long pfn = dma_handle >> PAGE_SHIFT;
unsigned long pfn = (dma_handle >> PAGE_SHIFT) + dev->dma_pfn_offset;
int k;
for (k = 0; k < (1 << order); k++)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment