Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: gpio-keys - use IRQF_SHARED
  Input: winbond-cir - select LEDS_TRIGGERS
  Input: i8042 - try to get stable CTR value when initializing
  Input: atkbd - add a quirk for OQO 01+ multimedia keys

drivers/input/keyboard/atkbd.c

@@ -233,6 +233,7 @@ struct atkbd {
  */
 static void (*atkbd_platform_fixup)(struct atkbd *, const void *data);
 static void *atkbd_platform_fixup_data;
+static unsigned int (*atkbd_platform_scancode_fixup)(struct atkbd *, unsigned int);
 
 static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf,
 				ssize_t (*handler)(struct atkbd *, char *));
@@ -393,6 +394,9 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
 
 	input_event(dev, EV_MSC, MSC_RAW, code);
 
+	if (atkbd_platform_scancode_fixup)
+		code = atkbd_platform_scancode_fixup(atkbd, code);
+
 	if (atkbd->translated) {
 
 		if (atkbd->emul || atkbd_need_xlate(atkbd->xl_bit, code)) {
@@ -922,6 +926,22 @@ static unsigned int atkbd_volume_forced_release_keys[] = {
 	0xae, 0xb0, -1U
 };
 
+/*
+ * OQO 01+ multimedia keys (64--66) generate e0 6x upon release whereas
+ * they should be generating e4-e6 (0x80 | code).
+ */
+static unsigned int atkbd_oqo_01plus_scancode_fixup(struct atkbd *atkbd,
+						    unsigned int code)
+{
+	if (atkbd->translated && atkbd->emul == 1 &&
+	    (code == 0x64 || code == 0x65 || code == 0x66)) {
+		atkbd->emul = 0;
+		code |= 0x80;
+	}
+
+	return code;
+}
+
 /*
  * atkbd_set_keycode_table() initializes keyboard's keycode table
  * according to the selected scancode set
@@ -1527,6 +1547,13 @@ static int __init atkbd_setup_forced_release(const struct dmi_system_id *id)
 	return 0;
 }
 
+static int __init atkbd_setup_scancode_fixup(const struct dmi_system_id *id)
+{
+	atkbd_platform_scancode_fixup = id->driver_data;
+
+	return 0;
+}
+
 static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 	{
 		.ident = "Dell Laptop",
@@ -1663,6 +1690,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.callback = atkbd_setup_forced_release,
 		.driver_data = atkdb_soltech_ta12_forced_release_keys,
 	},
+	{
+		.ident = "OQO Model 01+",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "OQO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"),
+		},
+		.callback = atkbd_setup_scancode_fixup,
+		.driver_data = atkbd_oqo_01plus_scancode_fixup,
+	},
 	{ }
 };
 

drivers/input/keyboard/gpio_keys.c

@@ -147,6 +147,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 		}
 
 		error = request_irq(irq, gpio_keys_isr,
+				    IRQF_SHARED |
 				    IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 				    button->desc ? button->desc : "gpio_keys",
 				    bdata);

drivers/input/misc/Kconfig

@@ -227,6 +227,7 @@ config INPUT_WINBOND_CIR
 	depends on X86 && PNP
 	select NEW_LEDS
 	select LEDS_CLASS
+	select LEDS_TRIGGERS
 	select BITREVERSE
 	help
 	  Say Y here if you want to use the IR remote functionality found

drivers/input/serio/i8042.c

@@ -836,17 +836,32 @@ static int i8042_controller_selftest(void)
 static int i8042_controller_init(void)
 {
 	unsigned long flags;
+	int n = 0;
+	unsigned char ctr[2];
 
 /*
- * Save the CTR for restoral on unload / reboot.
+ * Save the CTR for restore on unload / reboot.
  */
 
-	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) {
-		printk(KERN_ERR "i8042.c: Can't read CTR while initializing i8042.\n");
+	do {
+		if (n >= 10) {
+			printk(KERN_ERR
+				"i8042.c: Unable to get stable CTR read.\n");
 			return -EIO;
 		}
 
-	i8042_initial_ctr = i8042_ctr;
+		if (n != 0)
+			udelay(50);
+
+		if (i8042_command(&ctr[n++ % 2], I8042_CMD_CTL_RCTR)) {
+			printk(KERN_ERR
+				"i8042.c: Can't read CTR while initializing i8042.\n");
+			return -EIO;
+		}
+
+	} while (n < 2 || ctr[0] != ctr[1]);
+
+	i8042_initial_ctr = i8042_ctr = ctr[0];
 
 /*
  * Disable the keyboard interface and interrupt.
@@ -895,6 +910,12 @@ static int i8042_controller_init(void)
 		return -EIO;
 	}
 
+/*
+ * Flush whatever accumulated while we were disabling keyboard port.
+ */
+
+	i8042_flush();
+
 	return 0;
 }
 
@@ -914,7 +935,7 @@ static void i8042_controller_reset(void)
 	i8042_ctr |= I8042_CTR_KBDDIS | I8042_CTR_AUXDIS;
 	i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT);
 
-	if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR))
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
 		printk(KERN_WARNING "i8042.c: Can't write CTR while resetting.\n");
 
 /*