scsi: nsp_cs: Drop internal SCSI message definition

Use the standard SCSI message definitions instead of the driver-internal
ones.

Link: https://lore.kernel.org/r/20210113090500.129644-19-hare@suse.deReviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/pcmcia/nsp_cs.c

@@ -1132,7 +1132,7 @@ static irqreturn_t nspintr(int irq, void *dev_id)
 		//*sync_neg       = SYNC_NOT_YET;
 
 		/* all command complete and return status */
-		if (tmpSC->SCp.Message == MSG_COMMAND_COMPLETE) {
+		if (tmpSC->SCp.Message == COMMAND_COMPLETE) {
 			tmpSC->result = (DID_OK		             << 16) |
 					((tmpSC->SCp.Message & 0xff) <<  8) |
 					((tmpSC->SCp.Status  & 0xff) <<  0);
@@ -1226,9 +1226,9 @@ static irqreturn_t nspintr(int irq, void *dev_id)
 			data->Sync[target].SyncOffset = 0;
 
 			/**/
-			data->MsgBuffer[i] = MSG_EXTENDED; i++;
+			data->MsgBuffer[i] = EXTENDED_MESSAGE; i++;
 			data->MsgBuffer[i] = 3;            i++;
-			data->MsgBuffer[i] = MSG_EXT_SDTR; i++;
+			data->MsgBuffer[i] = EXTENDED_SDTR; i++;
 			data->MsgBuffer[i] = 0x0c;         i++;
 			data->MsgBuffer[i] = 15;           i++;
 			/**/
@@ -1255,9 +1255,9 @@ static irqreturn_t nspintr(int irq, void *dev_id)
 			//nsp_dbg(NSP_DEBUG_INTR, "sync target=%d,lun=%d",target,lun);
 
 			if (data->MsgLen       >= 5            &&
-			    data->MsgBuffer[0] == MSG_EXTENDED &&
+			    data->MsgBuffer[0] == EXTENDED_MESSAGE &&
 			    data->MsgBuffer[1] == 3            &&
-			    data->MsgBuffer[2] == MSG_EXT_SDTR ) {
+			    data->MsgBuffer[2] == EXTENDED_SDTR ) {
 				data->Sync[target].SyncPeriod = data->MsgBuffer[3];
 				data->Sync[target].SyncOffset = data->MsgBuffer[4];
 				//nsp_dbg(NSP_DEBUG_INTR, "sync ok, %d %d", data->MsgBuffer[3], data->MsgBuffer[4]);
@@ -1275,7 +1275,7 @@ static irqreturn_t nspintr(int irq, void *dev_id)
 		tmp = -1;
 		for (i = 0; i < data->MsgLen; i++) {
 			tmp = data->MsgBuffer[i];
-			if (data->MsgBuffer[i] == MSG_EXTENDED) {
+			if (data->MsgBuffer[i] == EXTENDED_MESSAGE) {
 				i += (1 + data->MsgBuffer[i+1]);
 			}
 		}

drivers/scsi/pcmcia/nsp_cs.h

@@ -370,17 +370,6 @@ enum _burst_mode {
 	BURST_MEM32 = 2,
 };
 
-/**************************************************************************
- * SCSI messaage
- */
-#define MSG_COMMAND_COMPLETE 0x00
-#define MSG_EXTENDED         0x01
-#define MSG_ABORT            0x06
-#define MSG_NO_OPERATION     0x08
-#define MSG_BUS_DEVICE_RESET 0x0c
-
-#define MSG_EXT_SDTR         0x01
-
 /* scatter-gather table */
 #  define BUFFER_ADDR ((char *)((sg_virt(SCpnt->SCp.buffer))))