Commit 1cb9af49 authored by Rajendra Nayak's avatar Rajendra Nayak Committed by Chris Ball

mmc: omap_hsmmc: Get rid of omap_hsmmc_4_set_power function

Now that omap_hsmmc_set_power() already has a check to return 0
if !host->vcc, it seems like it can be used even on MMC4 instead
of the dummy omap_hsmmc_4_set_power().

This also helps get rid of all the host->id based check to
populate the right function for on-chip/external level
shifting and use omap_hsmmc_set_power() for all MMC modules.
Signed-off-by: default avatarRajendra Nayak <rnayak@ti.com>
Tested-by: default avatarVenkatraman S <svenkatr@ti.com>
Tested-by: default avatarBalaji T K <balajitk@ti.com>
Signed-off-by: default avatarChris Ball <cjb@laptop.org>
parent 69b07ece
......@@ -297,32 +297,13 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on,
return ret;
}
static int omap_hsmmc_4_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
return 0;
}
static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
{
struct regulator *reg;
int ret = 0;
int ocr_value = 0;
switch (host->id) {
case OMAP_MMC1_DEVID:
case OMAP_MMC2_DEVID:
case OMAP_MMC3_DEVID:
case OMAP_MMC5_DEVID:
/* On-chip level shifting via PBIAS0/PBIAS1 */
mmc_slot(host).set_power = omap_hsmmc_set_power;
break;
case OMAP_MMC4_DEVID:
mmc_slot(host).set_power = omap_hsmmc_4_set_power;
default:
pr_err("MMC%d configuration not supported!\n", host->id);
return -EINVAL;
}
reg = regulator_get(host->dev, "vmmc");
if (IS_ERR(reg)) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment