arm64: tegra: Enable thermal support on Jetson AGX Orin

Add thermal zone details and enable the PWM fan as cooling device.

Note that this also changes the cooling levels for the PWM fan, which
should have no effect, though, because the fan wasn't previously
connected to anything and by default would be turned off at probe time.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi

@@ -139,4 +139,26 @@ vdd_12v_pcie: regulator-vdd-12v-pcie {
 		gpio = <&gpio TEGRA234_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>;
 		regulator-boot-on;
 	};
+
+	thermal-zones {
+		tj-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <1000>;
+			status = "okay";
+
+			trips {
+				tj_trip_active0: active-0 {
+					temperature = <75000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				tj_trip_active1: active-1 {
+					temperature = <95000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+			};
+		};
+	};
 };

arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts

@@ -2343,11 +2343,7 @@ key-suspend {
 	};
 
 	pwm-fan {
-		compatible = "pwm-fan";
-		pwms = <&pwm3 0 45334>;
-
-		cooling-levels = <0 95 178 255>;
-		#cooling-cells = <2>;
+		cooling-levels = <66 215 255>;
 	};
 
 	serial {
@@ -2433,4 +2429,20 @@ sound {
 			  "CVB-RT DMIC1",		"CVB-RT MIC",
 			  "CVB-RT DMIC2",		"CVB-RT MIC";
 	};
+
+	thermal-zones {
+		tj-thermal {
+			cooling-maps {
+				map-active-0 {
+					cooling-device = <&fan 0 1>;
+					trip = <&tj_trip_active0>;
+				};
+
+				map-active-1 {
+					cooling-device = <&fan 1 2>;
+					trip = <&tj_trip_active1>;
+				};
+			};
+		};
+	};
 };

arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi

@@ -33,6 +33,12 @@ pwm@32f0000 {
 		};
 	};
 
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm3 0 45334>;
+		#cooling-cells = <2>;
+	};
+
 	vdd_1v8_sys: regulator-vdd-1v8-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_1V8_SYS";