Skip to content

L
linux
Commit 1d59524b authored by Konrad Dybcio's avatar Konrad Dybcio Committed by Bjorn Andersson
Browse files
Options

ARM: dts: qcom-msm8974-klte: Use &labels 

Use &labels to align with the style used in new DTS and apply tiny
style fixes.
Signed-off-by: default avatarKonrad Dybcio <konrad.dybcio@somainline.org>
[bjorn: Rebased on top of Krzysztof's fixes]
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415115633.575010-12-konrad.dybcio@somainline.org
parent 1c1574e2
Hide whitespace changes
Inline Side-by-side
Showing with 585 additions and 621 deletions
arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
View file @ 1d59524b
...@@ -13,7 +13,7 @@ / { ...@@ -13,7 +13,7 @@ / {
aliases { aliases {
serial0 = &blsp1_uart1; serial0 = &blsp1_uart1;
mmc0 = &sdhc_1; /* SDC1 eMMC slot */ mmc0 = &sdhc_1; /* SDC1 eMMC slot */
mmc1 = &sdhc_2; /* SDC2 SD card slot */ mmc1 = &sdhc_3; /* SDC2 SD card slot */
}; };
chosen { chosen {
...@@ -52,197 +52,6 @@ volume-up { ...@@ -52,197 +52,6 @@ volume-up {
}; };
}; };
smd {
rpm {
rpm-requests {
pma8084-regulators {
compatible = "qcom,rpm-pma8084-regulators";
status = "okay";
pma8084_s1: s1 {
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <1050000>;
regulator-always-on;
};
pma8084_s2: s2 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1050000>;
};
pma8084_s3: s3 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
};
pma8084_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pma8084_s5: s5 {
regulator-min-microvolt = <2150000>;
regulator-max-microvolt = <2150000>;
};
pma8084_s6: s6 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
pma8084_l1: l1 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
pma8084_l2: l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pma8084_l3: l3 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1200000>;
};
pma8084_l4: l4 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1225000>;
};
pma8084_l5: l5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pma8084_l6: l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pma8084_l7: l7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pma8084_l8: l8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pma8084_l9: l9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
pma8084_l10: l10 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
pma8084_l11: l11 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
};
pma8084_l12: l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
pma8084_l13: l13 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
pma8084_l14: l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pma8084_l15: l15 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
pma8084_l16: l16 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
pma8084_l17: l17 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
pma8084_l18: l18 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
pma8084_l19: l19 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
pma8084_l20: l20 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-allow-set-load;
regulator-system-load = <200000>;
};
pma8084_l21: l21 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-allow-set-load;
regulator-system-load = <200000>;
};
pma8084_l22: l22 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
};
pma8084_l23: l23 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
pma8084_l24: l24 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};
pma8084_l25: l25 {
regulator-min-microvolt = <2100000>;
regulator-max-microvolt = <2100000>;
};
pma8084_l26: l26 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2050000>;
};
pma8084_l27: l27 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1225000>;
};
pma8084_lvs1: lvs1 {};
pma8084_lvs2: lvs2 {};
pma8084_lvs3: lvs3 {};
pma8084_lvs4: lvs4 {};
pma8084_5vs1: 5vs1 {};
};
};
};
};
i2c-gpio-touchkey { i2c-gpio-touchkey {
compatible = "i2c-gpio"; compatible = "i2c-gpio";
#address-cells = <1>; #address-cells = <1>;
...@@ -347,562 +156,717 @@ vreg_panel: panel-regulator { ...@@ -347,562 +156,717 @@ vreg_panel: panel-regulator {
}; };
/delete-node/ vreg-boost; /delete-node/ vreg-boost;
adsp-pil {
cx-supply = <&pma8084_s2>;
};
}; };
&soc { &blsp1_i2c2 {
serial@f991e000 { status = "okay";
status = "okay";
};
/* blsp2_uart2 */ pinctrl-names = "default";
serial@f995e000 { pinctrl-0 = <&i2c2_pins>;
status = "okay";
pinctrl-names = "default", "sleep"; touchscreen@20 {
pinctrl-0 = <&blsp2_uart2_pins_active>; compatible = "syna,rmi4-i2c";
pinctrl-1 = <&blsp2_uart2_pins_sleep>; reg = <0x20>;
bluetooth { interrupt-parent = <&pma8084_gpios>;
compatible = "brcm,bcm43540-bt"; interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
max-speed = <3000000>;
pinctrl-names = "default";
pinctrl-0 = <&bt_pins>;
device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
interrupt-parent = <&tlmm>;
interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wakeup";
};
};
pinctrl@fd510000 { vdd-supply = <&max77826_ldo13>;
blsp2_uart2_pins_active: blsp2-uart2-pins-active { vio-supply = <&pma8084_lvs2>;
pins = "gpio45", "gpio46", "gpio47", "gpio48";
function = "blsp_uart8"; pinctrl-names = "default";
drive-strength = <8>; pinctrl-0 = <&touch_pin>;
bias-disable;
syna,startup-delay-ms = <100>;
#address-cells = <1>;
#size-cells = <0>;
rmi4-f01@1 {
reg = <0x1>;
syna,nosleep-mode = <1>;
}; };
blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep { rmi4-f12@12 {
pins = "gpio45", "gpio46", "gpio47", "gpio48"; reg = <0x12>;
function = "gpio"; syna,sensor-type = <1>;
drive-strength = <2>;
bias-pull-down;
}; };
};
};
&blsp1_i2c6 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c6_pins>;
bt_pins: bt-pins { pmic@60 {
hostwake { reg = <0x60>;
pins = "gpio75"; compatible = "maxim,max77826";
function = "gpio";
drive-strength = <16>; regulators {
input-enable; max77826_ldo1: LDO1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
}; };
devwake { max77826_ldo2: LDO2 {
pins = "gpio91"; regulator-min-microvolt = <1000000>;
function = "gpio"; regulator-max-microvolt = <1000000>;
drive-strength = <2>;
}; };
};
sdhc1_pin_a: sdhc1-pin-active { max77826_ldo3: LDO3 {
clk { regulator-min-microvolt = <1200000>;
pins = "sdc1_clk"; regulator-max-microvolt = <1200000>;
drive-strength = <4>;
bias-disable;
}; };
cmd-data { max77826_ldo4: LDO4 {
pins = "sdc1_cmd", "sdc1_data"; regulator-min-microvolt = <1800000>;
drive-strength = <4>; regulator-max-microvolt = <1800000>;
bias-pull-up;
}; };
};
sdhc2_pin_a: sdhc2-pin-active { max77826_ldo5: LDO5 {
clk-cmd-data { regulator-min-microvolt = <1800000>;
pins = "gpio35", "gpio36", "gpio37", "gpio38", regulator-max-microvolt = <1800000>;
"gpio39", "gpio40";
function = "sdc3";
drive-strength = <8>;
bias-disable;
}; };
};
sdhc2_cd_pin: sdhc2-cd { max77826_ldo6: LDO6 {
pins = "gpio62"; regulator-min-microvolt = <1800000>;
function = "gpio"; regulator-max-microvolt = <3300000>;
};
drive-strength = <2>; max77826_ldo7: LDO7 {
bias-disable; regulator-min-microvolt = <1800000>;
}; regulator-max-microvolt = <1800000>;
};
sdhc3_pin_a: sdhc3-pin-active { max77826_ldo8: LDO8 {
clk { regulator-min-microvolt = <1800000>;
pins = "sdc2_clk"; regulator-max-microvolt = <3300000>;
drive-strength = <6>;
bias-disable;
}; };
cmd-data { max77826_ldo9: LDO9 {
pins = "sdc2_cmd", "sdc2_data"; regulator-min-microvolt = <1800000>;
drive-strength = <6>; regulator-max-microvolt = <1800000>;
bias-pull-up;
}; };
};
i2c2_pins: i2c2 { max77826_ldo10: LDO10 {
mux { regulator-min-microvolt = <2800000>;
pins = "gpio6", "gpio7"; regulator-max-microvolt = <2950000>;
function = "blsp_i2c2"; };
drive-strength = <2>; max77826_ldo11: LDO11 {
bias-disable; regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2950000>;
}; };
};
i2c6_pins: i2c6 { max77826_ldo12: LDO12 {
mux { regulator-min-microvolt = <2500000>;
pins = "gpio29", "gpio30"; regulator-max-microvolt = <3300000>;
function = "blsp_i2c6"; };
drive-strength = <2>; max77826_ldo13: LDO13 {
bias-disable; regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
}; };
};
i2c12_pins: i2c12 { max77826_ldo14: LDO14 {
mux { regulator-min-microvolt = <3300000>;
pins = "gpio87", "gpio88"; regulator-max-microvolt = <3300000>;
function = "blsp_i2c12"; };
drive-strength = <2>; max77826_ldo15: LDO15 {
bias-disable; regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
}; };
};
i2c_touchkey_pins: i2c-touchkey { max77826_buck: BUCK {
mux { regulator-min-microvolt = <1225000>;
pins = "gpio95", "gpio96"; regulator-max-microvolt = <1225000>;
function = "gpio";
input-enable;
bias-pull-up;
}; };
};
i2c_led_gpioex_pins: i2c-led-gpioex { max77826_buckboost: BUCKBOOST {
mux { regulator-min-microvolt = <3400000>;
pins = "gpio120", "gpio121"; regulator-max-microvolt = <3400000>;
function = "gpio";
input-enable;
bias-pull-down;
}; };
}; };
};
};
gpioex_pin: gpioex { &blsp1_uart2 {
res { status = "okay";
pins = "gpio145"; };
function = "gpio";
bias-pull-up; &blsp2_i2c6 {
drive-strength = <2>; status = "okay";
};
}; pinctrl-names = "default";
pinctrl-0 = <&i2c12_pins>;
fuelgauge@36 {
compatible = "maxim,max17048";
reg = <0x36>;
maxim,double-soc;
maxim,rcomp = /bits/ 8 <0x56>;
interrupt-parent = <&pma8084_gpios>;
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&fuelgauge_pin>;
};
};
wifi_pin: wifi { &blsp2_uart2 {
int { status = "okay";
pins = "gpio92";
function = "gpio";
input-enable; pinctrl-names = "default", "sleep";
bias-pull-down; pinctrl-0 = <&blsp2_uart2_pins_active>;
pinctrl-1 = <&blsp2_uart2_pins_sleep>;
bluetooth {
compatible = "brcm,bcm43540-bt";
max-speed = <3000000>;
pinctrl-names = "default";
pinctrl-0 = <&bt_pins>;
device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
interrupt-parent = <&tlmm>;
interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wakeup";
};
};
&dsi0 {
status = "okay";
vdda-supply = <&pma8084_l2>;
vdd-supply = <&pma8084_l22>;
vddio-supply = <&pma8084_l12>;
panel: panel@0 {
reg = <0>;
compatible = "samsung,s6e3fa2";
pinctrl-names = "default";
pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
iovdd-supply = <&pma8084_lvs4>;
vddr-supply = <&vreg_panel>;
reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
port {
panel_in: endpoint {
remote-endpoint = <&dsi0_out>;
}; };
}; };
};
};
panel_te_pin: panel { &dsi0_out {
te { remote-endpoint = <&panel_in>;
pins = "gpio12"; data-lanes = <0 1 2 3>;
function = "mdp_vsync"; };
drive-strength = <2>; &dsi0_phy {
bias-disable; status = "okay";
};
vddio-supply = <&pma8084_l12>;
};
&gpu {
status = "okay";
};
&mdss {
status = "okay";
};
&otg {
status = "okay";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
hnp-disable;
srp-disable;
adp-disable;
ulpi {
phy@a {
status = "okay";
v1p8-supply = <&pma8084_l6>;
v3p3-supply = <&pma8084_l24>;
qcom,init-seq = /bits/ 8 <0x1 0x64>;
}; };
}; };
};
sdhci@f9824900 { &pma8084_gpios {
status = "okay"; gpio_keys_pin_a: gpio-keys-active {
pins = "gpio2", "gpio3", "gpio5";
function = "normal";
vmmc-supply = <&pma8084_l20>; bias-pull-up;
vqmmc-supply = <&pma8084_s4>; power-source = <PMA8084_GPIO_S4>;
};
bus-width = <8>; touchkey_pin: touchkey-int-pin {
non-removable; pins = "gpio6";
function = "normal";
bias-disable;
input-enable;
power-source = <PMA8084_GPIO_S4>;
};
pinctrl-names = "default"; touch_pin: touchscreen-int-pin {
pinctrl-0 = <&sdhc1_pin_a>; pins = "gpio8";
function = "normal";
bias-disable;
input-enable;
power-source = <PMA8084_GPIO_S4>;
}; };
sdhci@f9864900 { panel_en_pin: panel-en-pin {
status = "okay"; pins = "gpio14";
function = "normal";
bias-pull-up;
power-source = <PMA8084_GPIO_S4>;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
};
max-frequency = <100000000>; wlan_sleep_clk_pin: wlan-sleep-clk-pin {
pins = "gpio16";
function = "func2";
vmmc-supply = <&pma8084_l21>; output-high;
vqmmc-supply = <&pma8084_l13>; power-source = <PMA8084_GPIO_S4>;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
};
bus-width = <4>; panel_rst_pin: panel-rst-pin {
pins = "gpio17";
function = "normal";
bias-disable;
power-source = <PMA8084_GPIO_S4>;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
};
/* cd-gpio is intentionally disabled. If enabled, an SD card fuelgauge_pin: fuelgauge-int-pin {
* present during boot is not initialized correctly. Without pins = "gpio21";
* cd-gpios the driver resorts to polling, so hotplug works. function = "normal";
*/ bias-disable;
pinctrl-names = "default"; input-enable;
pinctrl-0 = <&sdhc2_pin_a /* &sdhc2_cd_pin */>; power-source = <PMA8084_GPIO_S4>;
// cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
}; };
};
sdhci@f98a4900 { &remoteproc_adsp {
status = "okay"; cx-supply = <&pma8084_s2>;
};
#address-cells = <1>; &remoteproc_mss {
#size-cells = <0>; cx-supply = <&pma8084_s2>;
mss-supply = <&pma8084_s6>;
mx-supply = <&pma8084_s1>;
pll-supply = <&pma8084_l12>;
};
max-frequency = <100000000>; &rpm_requests {
pma8084-regulators {
compatible = "qcom,rpm-pma8084-regulators";
pinctrl-names = "default"; pma8084_s1: s1 {
pinctrl-0 = <&sdhc3_pin_a>; regulator-min-microvolt = <675000>;
regulator-max-microvolt = <1050000>;
regulator-always-on;
};
vmmc-supply = <&vreg_wlan>; pma8084_s2: s2 {
vqmmc-supply = <&pma8084_s4>; regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1050000>;
};
bus-width = <4>; pma8084_s3: s3 {
non-removable; regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
};
wifi@1 { pma8084_s4: s4 {
reg = <1>; regulator-min-microvolt = <1800000>;
compatible = "brcm,bcm4329-fmac"; regulator-max-microvolt = <1800000>;
};
interrupt-parent = <&tlmm>; pma8084_s5: s5 {
interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; regulator-min-microvolt = <2150000>;
interrupt-names = "host-wake"; regulator-max-microvolt = <2150000>;
};
pinctrl-names = "default"; pma8084_s6: s6 {
pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>; regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
}; };
};
usb@f9a55000 { pma8084_l1: l1 {
status = "okay"; regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
phys = <&usb_hs1_phy>; pma8084_l2: l2 {
phy-select = <&tcsr 0xb000 0>; regulator-min-microvolt = <1200000>;
/*extcon = <&smbb>, <&usb_id>;*/ regulator-max-microvolt = <1200000>;
/*vbus-supply = <&chg_otg>;*/ };
hnp-disable; pma8084_l3: l3 {
srp-disable; regulator-min-microvolt = <1050000>;
adp-disable; regulator-max-microvolt = <1200000>;
};
ulpi { pma8084_l4: l4 {
phy@a { regulator-min-microvolt = <1200000>;
status = "okay"; regulator-max-microvolt = <1225000>;
};
v1p8-supply = <&pma8084_l6>; pma8084_l5: l5 {
v3p3-supply = <&pma8084_l24>; regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
/*extcon = <&smbb>;*/ pma8084_l6: l6 {
qcom,init-seq = /bits/ 8 <0x1 0x64>; regulator-min-microvolt = <1800000>;
}; regulator-max-microvolt = <1800000>;
}; };
};
i2c@f9924000 { pma8084_l7: l7 {
status = "okay"; regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pinctrl-names = "default"; pma8084_l8: l8 {
pinctrl-0 = <&i2c2_pins>; regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
touchscreen@20 { pma8084_l9: l9 {
compatible = "syna,rmi4-i2c"; regulator-min-microvolt = <1800000>;
reg = <0x20>; regulator-max-microvolt = <2950000>;
};
interrupt-parent = <&pma8084_gpios>; pma8084_l10: l10 {
interrupts = <8 IRQ_TYPE_EDGE_FALLING>; regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
vdd-supply = <&max77826_ldo13>; pma8084_l11: l11 {
vio-supply = <&pma8084_lvs2>; regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
};
pinctrl-names = "default"; pma8084_l12: l12 {
pinctrl-0 = <&touch_pin>; regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
syna,startup-delay-ms = <100>; pma8084_l13: l13 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
#address-cells = <1>; pma8084_l14: l14 {
#size-cells = <0>; regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
rmi4-f01@1 { pma8084_l15: l15 {
reg = <0x1>; regulator-min-microvolt = <2050000>;
syna,nosleep-mode = <1>; regulator-max-microvolt = <2050000>;
}; };
rmi4-f12@12 { pma8084_l16: l16 {
reg = <0x12>; regulator-min-microvolt = <2700000>;
syna,sensor-type = <1>; regulator-max-microvolt = <2700000>;
};
}; };
};
i2c@f9928000 { pma8084_l17: l17 {
status = "okay"; regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
pinctrl-names = "default"; pma8084_l18: l18 {
pinctrl-0 = <&i2c6_pins>; regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
pmic@60 {
reg = <0x60>;
compatible = "maxim,max77826";
regulators {
max77826_ldo1: LDO1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
max77826_ldo2: LDO2 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
max77826_ldo3: LDO3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
max77826_ldo4: LDO4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
max77826_ldo5: LDO5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
max77826_ldo6: LDO6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
max77826_ldo7: LDO7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
max77826_ldo8: LDO8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
max77826_ldo9: LDO9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
max77826_ldo10: LDO10 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2950000>;
};
max77826_ldo11: LDO11 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2950000>;
};
max77826_ldo12: LDO12 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <3300000>;
};
max77826_ldo13: LDO13 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
max77826_ldo14: LDO14 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
max77826_ldo15: LDO15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
max77826_buck: BUCK {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
max77826_buckboost: BUCKBOOST {
regulator-min-microvolt = <3400000>;
regulator-max-microvolt = <3400000>;
};
};
}; };
};
i2c@f9968000 { pma8084_l19: l19 {
status = "okay"; regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
pinctrl-names = "default"; pma8084_l20: l20 {
pinctrl-0 = <&i2c12_pins>; regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-system-load = <200000>;
regulator-allow-set-load;
};
fuelgauge@36 { pma8084_l21: l21 {
compatible = "maxim,max17048"; regulator-min-microvolt = <2950000>;
reg = <0x36>; regulator-max-microvolt = <2950000>;
regulator-system-load = <200000>;
regulator-allow-set-load;
};
maxim,double-soc; pma8084_l22: l22 {
maxim,rcomp = /bits/ 8 <0x56>; regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
};
interrupt-parent = <&pma8084_gpios>; pma8084_l23: l23 {
interrupts = <21 IRQ_TYPE_LEVEL_LOW>; regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
pinctrl-names = "default"; pma8084_l24: l24 {
pinctrl-0 = <&fuelgauge_pin>; regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
}; };
pma8084_l25: l25 {
regulator-min-microvolt = <2100000>;
regulator-max-microvolt = <2100000>;
};
pma8084_l26: l26 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2050000>;
};
pma8084_l27: l27 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1225000>;
};
pma8084_lvs1: lvs1 {};
pma8084_lvs2: lvs2 {};
pma8084_lvs3: lvs3 {};
pma8084_lvs4: lvs4 {};
pma8084_5vs1: 5vs1 {};
}; };
};
&sdhc_1 {
status = "okay";
vmmc-supply = <&pma8084_l20>;
vqmmc-supply = <&pma8084_s4>;
pinctrl-names = "default";
pinctrl-0 = <&sdhc1_pin_a>;
};
&sdhc_2 {
status = "okay";
max-frequency = <100000000>;
adreno@fdb00000 { pinctrl-names = "default";
status = "ok"; pinctrl-0 = <&sdhc3_pin_a>;
vmmc-supply = <&vreg_wlan>;
vqmmc-supply = <&pma8084_s4>;
non-removable;
#address-cells = <1>;
#size-cells = <0>;
wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&tlmm>;
interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wake";
pinctrl-names = "default";
pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
}; };
};
mdss@fd900000 { &sdhc_3 {
status = "ok"; status = "okay";
max-frequency = <100000000>;
vmmc-supply = <&pma8084_l21>;
vqmmc-supply = <&pma8084_l13>;
/*
* cd-gpio is intentionally disabled. If enabled, an SD card
* present during boot is not initialized correctly. Without
* cd-gpios the driver resorts to polling, so hotplug works.
*/
pinctrl-names = "default";
pinctrl-0 = <&sdhc2_pin_a /* &sdhc2_cd_pin */>;
/* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */
};
mdp@fd900000 { &tlmm {
status = "ok"; blsp2_uart2_pins_active: blsp2-uart2-pins-active {
}; pins = "gpio45", "gpio46", "gpio47", "gpio48";
function = "blsp_uart8";
drive-strength = <8>;
bias-disable;
};
dsi@fd922800 { blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep {
status = "ok"; pins = "gpio45", "gpio46", "gpio47", "gpio48";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
vdda-supply = <&pma8084_l2>; bt_pins: bt-pins {
vdd-supply = <&pma8084_l22>; hostwake {
vddio-supply = <&pma8084_l12>; pins = "gpio75";
function = "gpio";
drive-strength = <16>;
input-enable;
};
#address-cells = <1>; devwake {
#size-cells = <0>; pins = "gpio91";
function = "gpio";
drive-strength = <2>;
};
};
ports { sdhc1_pin_a: sdhc1-pin-active {
port@1 { clk {
endpoint { pins = "sdc1_clk";
remote-endpoint = <&panel_in>; drive-strength = <4>;
data-lanes = <0 1 2 3>; bias-disable;
}; };
};
};
panel: panel@0 { cmd-data {
reg = <0>; pins = "sdc1_cmd", "sdc1_data";
compatible = "samsung,s6e3fa2"; drive-strength = <4>;
bias-pull-up;
};
};
sdhc2_pin_a: sdhc2-pin-active {
clk-cmd-data {
pins = "gpio35", "gpio36", "gpio37", "gpio38",
"gpio39", "gpio40";
function = "sdc3";
drive-strength = <8>;
bias-disable;
};
};
pinctrl-names = "default"; sdhc2_cd_pin: sdhc2-cd {
pinctrl-0 = <&panel_te_pin &panel_rst_pin>; pins = "gpio62";
function = "gpio";
iovdd-supply = <&pma8084_lvs4>; drive-strength = <2>;
vddr-supply = <&vreg_panel>; bias-disable;
};
reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>; sdhc3_pin_a: sdhc3-pin-active {
te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; clk {
pins = "sdc2_clk";
drive-strength = <6>;
bias-disable;
};
port { cmd-data {
panel_in: endpoint { pins = "sdc2_cmd", "sdc2_data";
remote-endpoint = <&dsi0_out>; drive-strength = <6>;
}; bias-pull-up;
};
};
}; };
};
dsi-phy@fd922a00 { i2c2_pins: i2c2 {
status = "ok"; mux {
pins = "gpio6", "gpio7";
function = "blsp_i2c2";
vddio-supply = <&pma8084_l12>; drive-strength = <2>;
bias-disable;
}; };
}; };
remoteproc@fc880000 { i2c6_pins: i2c6 {
cx-supply = <&pma8084_s2>; mux {
mss-supply = <&pma8084_s6>; pins = "gpio29", "gpio30";
mx-supply = <&pma8084_s1>; function = "blsp_i2c6";
pll-supply = <&pma8084_l12>;
drive-strength = <2>;
bias-disable;
};
}; };
};
&spmi_bus { i2c12_pins: i2c12 {
pma8084@0 { mux {
gpios@c000 { pins = "gpio87", "gpio88";
gpio_keys_pin_a: gpio-keys-active { function = "blsp_i2c12";
pins = "gpio2", "gpio3", "gpio5";
function = "normal";
bias-pull-up; drive-strength = <2>;
power-source = <PMA8084_GPIO_S4>; bias-disable;
}; };
};
touchkey_pin: touchkey-int-pin { i2c_touchkey_pins: i2c-touchkey {
pins = "gpio6"; mux {
function = "normal"; pins = "gpio95", "gpio96";
bias-disable; function = "gpio";
input-enable; input-enable;
power-source = <PMA8084_GPIO_S4>; bias-pull-up;
}; };
};
touch_pin: touchscreen-int-pin { i2c_led_gpioex_pins: i2c-led-gpioex {
pins = "gpio8"; mux {
function = "normal"; pins = "gpio120", "gpio121";
bias-disable; function = "gpio";
input-enable; input-enable;
power-source = <PMA8084_GPIO_S4>; bias-pull-down;
}; };
};
panel_en_pin: panel-en-pin { gpioex_pin: gpioex {
pins = "gpio14"; res {
function = "normal"; pins = "gpio145";
bias-pull-up; function = "gpio";
power-source = <PMA8084_GPIO_S4>;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
};
wlan_sleep_clk_pin: wlan-sleep-clk-pin { bias-pull-up;
pins = "gpio16"; drive-strength = <2>;
function = "func2"; };
};
output-high; wifi_pin: wifi {
power-source = <PMA8084_GPIO_S4>; int {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; pins = "gpio92";
}; function = "gpio";
panel_rst_pin: panel-rst-pin { input-enable;
pins = "gpio17"; bias-pull-down;
function = "normal"; };
bias-disable; };
power-source = <PMA8084_GPIO_S4>;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
};
panel_te_pin: panel {
te {
pins = "gpio12";
function = "mdp_vsync";
fuelgauge_pin: fuelgauge-int-pin { drive-strength = <2>;
pins = "gpio21"; bias-disable;
function = "normal";
bias-disable;
input-enable;
power-source = <PMA8084_GPIO_S4>;
};
}; };
}; };
}; };
arch/arm/boot/dts/qcom-msm8974.dtsi
View file @ 1d59524b
...@@ -339,7 +339,7 @@ timer { ...@@ -339,7 +339,7 @@ timer {
clock-frequency = <19200000>; clock-frequency = <19200000>;
}; };
adsp-pil { remoteproc_adsp: adsp-pil {
compatible = "qcom,msm8974-adsp-pil"; compatible = "qcom,msm8974-adsp-pil";
interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
...@@ -840,7 +840,7 @@ rng@f9bff000 { ...@@ -840,7 +840,7 @@ rng@f9bff000 {
clock-names = "core"; clock-names = "core";
}; };
remoteproc@fc880000 { remoteproc_mss: remoteproc@fc880000 {
compatible = "qcom,msm8974-mss-pil"; compatible = "qcom,msm8974-mss-pil";
reg = <0xfc880000 0x100>, <0xfc820000 0x020>; reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
reg-names = "qdsp6", "rmb"; reg-names = "qdsp6", "rmb";
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7