Commit 1fa6b5fb authored by Hannes Reinecke's avatar Hannes Reinecke Committed by Christoph Hellwig

scsi: Remove scsi_print_command when calling abort

Calling scsi_print_command should not be necessary during abort;
if the information is required one should enable scsi logging.
Signed-off-by: default avatarHannes Reinecke <hare@suse.de>
Reviewed-by: default avatarRobert Elliott <elliott@hp.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
parent a9a47bf5
......@@ -1906,9 +1906,7 @@ NCR_700_abort(struct scsi_cmnd * SCp)
{
struct NCR_700_command_slot *slot;
scmd_printk(KERN_INFO, SCp,
"New error handler wants to abort command\n\t");
scsi_print_command(SCp);
scmd_printk(KERN_INFO, SCp, "abort command\n");
slot = (struct NCR_700_command_slot *)SCp->host_scribble;
......
......@@ -2667,8 +2667,7 @@ static int NCR5380_abort(Scsi_Cmnd * cmd) {
struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
Scsi_Cmnd *tmp, **prev;
printk(KERN_WARNING "scsi%d : aborting command\n", instance->host_no);
scsi_print_command(cmd);
scmd_printk(KERN_WARNING, cmd, "aborting command\n");
NCR5380_print_status(instance);
......
......@@ -2423,14 +2423,11 @@ int fas216_eh_abort(struct scsi_cmnd *SCpnt)
info->stats.aborts += 1;
printk(KERN_WARNING "scsi%d: abort command ", info->host->host_no);
__scsi_print_command(SCpnt->cmnd, SCpnt->cmd_len);
scmd_printk(KERN_WARNING, SCpnt, "abort command\n");
print_debug_list();
fas216_dumpstate(info);
printk(KERN_WARNING "scsi%d: abort %p ", info->host->host_no, SCpnt);
switch (fas216_find_command(info, SCpnt)) {
/*
* We found the command, and cleared it out. Either
......@@ -2438,7 +2435,7 @@ int fas216_eh_abort(struct scsi_cmnd *SCpnt)
* target, or the busylun bit is not set.
*/
case res_success:
printk("success\n");
scmd_printk(KERN_WARNING, SCpnt, "abort %p success\n", SCpnt);
result = SUCCESS;
break;
......@@ -2449,13 +2446,12 @@ int fas216_eh_abort(struct scsi_cmnd *SCpnt)
*/
case res_hw_abort:
/*
* We are unable to abort the command for some reason.
*/
default:
case res_failed:
printk("failed\n");
scmd_printk(KERN_WARNING, SCpnt, "abort %p failed\n", SCpnt);
break;
}
......
......@@ -2623,8 +2623,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
Scsi_Cmnd *tmp, **prev;
unsigned long flags;
printk(KERN_NOTICE "scsi%d: aborting command\n", HOSTNO);
scsi_print_command(cmd);
scmd_printk(KERN_NOTICE, cmd, "aborting command\n");
NCR5380_print_status(instance);
......
......@@ -220,10 +220,6 @@ static int ps3rom_queuecommand_lck(struct scsi_cmnd *cmd,
unsigned char opcode;
int res;
#ifdef DEBUG
scsi_print_command(cmd);
#endif
priv->curr_cmd = cmd;
cmd->scsi_done = done;
......
......@@ -1162,9 +1162,7 @@ static int stex_abort(struct scsi_cmnd *cmd)
int result = SUCCESS;
unsigned long flags;
printk(KERN_INFO DRV_NAME
"(%s): aborting command\n", pci_name(hba->pdev));
scsi_print_command(cmd);
scmd_printk(KERN_INFO, cmd, "aborting command\n");
base = hba->mmio_base;
spin_lock_irqsave(host->host_lock, flags);
......@@ -1352,9 +1350,8 @@ static int stex_reset(struct scsi_cmnd *cmd)
hba = (struct st_hba *) &cmd->device->host->hostdata[0];
printk(KERN_INFO DRV_NAME
"(%s): resetting host\n", pci_name(hba->pdev));
scsi_print_command(cmd);
shost_printk(KERN_INFO, cmd->device->host,
"resetting host\n");
return stex_do_reset(hba) ? FAILED : SUCCESS;
}
......
......@@ -2608,8 +2608,7 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
struct scsi_cmnd *tmp, **prev;
unsigned long flags;
printk(KERN_NOTICE "scsi%d: aborting command\n", HOSTNO);
scsi_print_command(cmd);
scmd_printk(KERN_NOTICE, cmd, "aborting command\n");
NCR5380_print_status (instance);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment