[MTD] OneNAND: Error message printing and bad block scan erros

Provide the bad block scan with its own read function so that important error
messages that are not from the the bad block scan, can always be printed.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

drivers/mtd/onenand/onenand_bbt.c

@@ -17,8 +17,8 @@
 #include <linux/mtd/onenand.h>
 #include <linux/mtd/compatmac.h>
 
-extern int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
-			       size_t *retlen, u_char *buf, mtd_oob_mode_t mode);
+extern int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
+				struct mtd_oob_ops *ops);
 
 /**
  * check_short_pattern - [GENERIC] check if a pattern is in the buffer
@@ -65,6 +65,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 	int startblock;
 	loff_t from;
 	size_t readlen, ooblen;
+	struct mtd_oob_ops ops;
 
 	printk(KERN_INFO "Scanning device for bad blocks\n");
 
@@ -82,22 +83,24 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 	startblock = 0;
 	from = 0;
 
+	ops.mode = MTD_OOB_PLACE;
+	ops.ooblen = readlen;
+	ops.oobbuf = buf;
+	ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
+
 	for (i = startblock; i < numblocks; ) {
 		int ret;
 
 		for (j = 0; j < len; j++) {
-			size_t retlen;
-
 			/* No need to read pages fully,
 			 * just read required OOB bytes */
-			ret = onenand_do_read_oob(mtd, from + j * mtd->writesize + bd->offs,
-						  readlen, &retlen, &buf[0], MTD_OOB_PLACE);
+			ret = onenand_bbt_read_oob(mtd, from + j * mtd->writesize + bd->offs, &ops);
 
 			/* If it is a initial bad block, just ignore it */
-			if (ret && !(ret & ONENAND_CTRL_LOAD))
-				return ret;
+			if (ret == ONENAND_BBT_READ_FATAL_ERROR)
+				return -EIO;
 
-			if (check_short_pattern(&buf[j * scanlen], scanlen, mtd->writesize, bd)) {
+			if (ret || check_short_pattern(&buf[j * scanlen], scanlen, mtd->writesize, bd)) {
 				bbm->bbt[i >> 3] |= 0x03 << (i & 0x6);
 				printk(KERN_WARNING "Bad eraseblock %d at 0x%08x\n",
 					i >> 1, (unsigned int) from);

include/linux/mtd/bbm.h

@@ -92,6 +92,13 @@ struct nand_bbt_descr {
  */
 #define ONENAND_BADBLOCK_POS	0
 
+/*
+ * Bad block scanning errors
+ */
+#define ONENAND_BBT_READ_ERROR		1
+#define ONENAND_BBT_READ_ECC_ERROR	2
+#define ONENAND_BBT_READ_FATAL_ERROR	4
+
 /**
  * struct bbm_info - [GENERIC] Bad Block Table data structure
  * @bbt_erase_shift:	[INTERN] number of address bits in a bbt entry