IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters
Add an InfiniBand driver for Mellanox ConnectX adapters. Because
these adapters can also be used as ethernet NICs and Fibre Channel
HBAs, the driver is split into two modules:
mlx4_core: Handles low-level things like device initialization and
processing firmware commands. Also controls resource allocation
so that the InfiniBand, ethernet and FC functions can share a
device without stepping on each other.
mlx4_ib: Handles InfiniBand-specific things; plugs into the
InfiniBand midlayer.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Showing
drivers/net/mlx4/Makefile
0 → 100644
drivers/net/mlx4/alloc.c
0 → 100644
drivers/net/mlx4/catas.c
0 → 100644
drivers/net/mlx4/cmd.c
0 → 100644
drivers/net/mlx4/cq.c
0 → 100644
drivers/net/mlx4/eq.c
0 → 100644
drivers/net/mlx4/fw.c
0 → 100644
drivers/net/mlx4/fw.h
0 → 100644
drivers/net/mlx4/icm.c
0 → 100644
drivers/net/mlx4/icm.h
0 → 100644
drivers/net/mlx4/intf.c
0 → 100644
drivers/net/mlx4/main.c
0 → 100644
drivers/net/mlx4/mcg.c
0 → 100644
drivers/net/mlx4/mlx4.h
0 → 100644
drivers/net/mlx4/mr.c
0 → 100644
drivers/net/mlx4/pd.c
0 → 100644
drivers/net/mlx4/profile.c
0 → 100644
drivers/net/mlx4/qp.c
0 → 100644
drivers/net/mlx4/reset.c
0 → 100644
drivers/net/mlx4/srq.c
0 → 100644
include/linux/mlx4/cmd.h
0 → 100644
include/linux/mlx4/cq.h
0 → 100644
include/linux/mlx4/device.h
0 → 100644
include/linux/mlx4/driver.h
0 → 100644
include/linux/mlx4/qp.h
0 → 100644
include/linux/mlx4/srq.h
0 → 100644
Please register or sign in to comment