Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (27 commits)
  regulator: wm831x_reg_read() failure unnoticed in wm831x_aldo_get_mode()
  twl-regulator: Fix reg_disable functionality for 4030 and 6030
  twl-regulator: Add turnon delay to reg_enable
  twl-regulator: Restore REMAP configuration in regulator probe
  twl-regulator: Add turnon-delay and REMAP config to twlreg_info struct
  twl-regulator: Define critical regulators as always_on
  twl-regulator: Add all twl4030 regulators to twlreg_info
  regulator: mc13783-regulator: correct the probing time.
  regulator: Fix unbalanced disables/enables in regulator_bulk_{enable,disable} error path
  regulator: core.c: Small coding style cleanup (indentation fixup)
  drivers/regulator: use PTR_ERR to get error code
  regulator: consumer.h - fix build when consumer.h is #included first.
  regulator/mc13783: various cleanups
  regulator/mc13783: rename source file to match other drivers
  Fix some AB3100 regulator issues
  regulator: keep index within bounds in da9034_get_ldo12_voltage()
  regulator: Ensure val is initialised in 88pm8607 choose_voltage()
  regulator: Remove duplicate consts from ab3100
  regulator: Handle regulators without suspend mode configuration
  regulator: Factor out regulator name pretty printing
  ...

drivers/regulator/Kconfig

@@ -69,6 +69,13 @@ config REGULATOR_MAX1586
 	  regulator via I2C bus. The provided regulator is suitable
 	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
 
+config REGULATOR_MAX8660
+	tristate "Maxim 8660/8661 voltage regulator"
+	depends on I2C
+	help
+	  This driver controls a Maxim 8660/8661 voltage output
+	  regulator via I2C bus.
+
 config REGULATOR_TWL4030
 	bool "TI TWL4030/TWL5030/TWL6030/TPS695x0 PMIC"
 	depends on TWL4030_CORE
@@ -157,5 +164,11 @@ config REGULATOR_TPS6507X
 	  three step-down converters and two general-purpose LDO voltage regulators.
 	  It supports TI's software based Class-2 SmartReflex implementation.
 
+config REGULATOR_88PM8607
+	bool "Marvell 88PM8607 Power regulators"
+	depends on MFD_88PM8607=y
+	help
+	  This driver supports 88PM8607 voltage regulator chips.
+
 endif
 

drivers/regulator/Makefile

@@ -12,6 +12,7 @@ obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
 obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
 obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
 obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
+obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
@@ -20,10 +21,11 @@ obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
 obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
 obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
-obj-$(CONFIG_REGULATOR_MC13783) += mc13783.o
+obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
 obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
 
 obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o
+obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
 
 ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG

drivers/regulator/ab3100.c

@@ -81,7 +81,7 @@ static const u8 ab3100_reg_init_order[AB3100_NUM_REGULATORS+2] = {
 #define LDO_C_VOLTAGE 2650000
 #define LDO_D_VOLTAGE 2650000
 
-static const int const ldo_e_buck_typ_voltages[] = {
+static const int ldo_e_buck_typ_voltages[] = {
 	1800000,
 	1400000,
 	1300000,
@@ -91,7 +91,7 @@ static const int const ldo_e_buck_typ_voltages[] = {
 	900000,
 };
 
-static const int const ldo_f_typ_voltages[] = {
+static const int ldo_f_typ_voltages[] = {
 	1800000,
 	1400000,
 	1300000,
@@ -102,21 +102,21 @@ static const int const ldo_f_typ_voltages[] = {
 	2650000,
 };
 
-static const int const ldo_g_typ_voltages[] = {
+static const int ldo_g_typ_voltages[] = {
 	2850000,
 	2750000,
 	1800000,
 	1500000,
 };
 
-static const int const ldo_h_typ_voltages[] = {
+static const int ldo_h_typ_voltages[] = {
 	2750000,
 	1800000,
 	1500000,
 	1200000,
 };
 
-static const int const ldo_k_typ_voltages[] = {
+static const int ldo_k_typ_voltages[] = {
 	2750000,
 	1800000,
 };
@@ -241,24 +241,12 @@ static int ab3100_disable_regulator(struct regulator_dev *reg)
 	 * LDO D is a special regulator. When it is disabled, the entire
 	 * system is shut down. So this is handled specially.
 	 */
+	pr_info("Called ab3100_disable_regulator\n");
 	if (abreg->regreg == AB3100_LDO_D) {
-		int i;
-
 		dev_info(&reg->dev, "disabling LDO D - shut down system\n");
-		/*
-		 * Set regulators to default values, ignore any errors,
-		 * we're going DOWN
-		 */
-		for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) {
-			(void) ab3100_set_register_interruptible(abreg->ab3100,
-					ab3100_reg_init_order[i],
-					abreg->plfdata->reg_initvals[i]);
-		}
-
 		/* Setting LDO D to 0x00 cuts the power to the SoC */
 		return ab3100_set_register_interruptible(abreg->ab3100,
 							 AB3100_LDO_D, 0x00U);
-
 	}
 
 	/*
@@ -607,13 +595,6 @@ static int __init ab3100_regulators_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (err) {
-		dev_err(&pdev->dev,
-			"LDO D regulator initialization failed with error %d\n",
-			err);
-		return err;
-	}
-
 	/* Register the regulators */
 	for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
 		struct ab3100_regulator *reg = &ab3100_regulators[i];
@@ -688,7 +669,7 @@ static __init int ab3100_regulators_init(void)
 
 static __exit void ab3100_regulators_exit(void)
 {
-	platform_driver_register(&ab3100_regulators_driver);
+	platform_driver_unregister(&ab3100_regulators_driver);
 }
 
 subsys_initcall(ab3100_regulators_init);

drivers/regulator/da903x.c

@@ -331,7 +331,7 @@ static int da9034_get_ldo12_voltage(struct regulator_dev *rdev)
 static int da9034_list_ldo12_voltage(struct regulator_dev *rdev,
 				     unsigned selector)
 {
-	if (selector > ARRAY_SIZE(da9034_ldo12_data))
+	if (selector >= ARRAY_SIZE(da9034_ldo12_data))
 		return -EINVAL;
 	return da9034_ldo12_data[selector] * 1000;
 }

drivers/regulator/lp3971.c

@@ -446,8 +446,8 @@ static int setup_regulators(struct lp3971 *lp3971,
 		lp3971->rdev[i] = regulator_register(&regulators[id],
 			lp3971->dev, pdata->regulators[i].initdata, lp3971);
 
-		err = IS_ERR(lp3971->rdev[i]);
-		if (err) {
+		if (IS_ERR(lp3971->rdev[i])) {
+			err = PTR_ERR(lp3971->rdev[i]);
 			dev_err(lp3971->dev, "regulator init failed: %d\n",
 				err);
 			goto error;

drivers/regulator/mc13783-regulator.c

+/*
+ * Regulator Driver for Freescale MC13783 PMIC
+ *
+ * Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mfd/mc13783.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/driver.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#define MC13783_REG_SWITCHERS4			28
+#define MC13783_REG_SWITCHERS4_PLLEN			(1 << 18)
+
+#define MC13783_REG_SWITCHERS5			29
+#define MC13783_REG_SWITCHERS5_SW3EN			(1 << 20)
+
+#define MC13783_REG_REGULATORMODE0		32
+#define MC13783_REG_REGULATORMODE0_VAUDIOEN		(1 << 0)
+#define MC13783_REG_REGULATORMODE0_VIOHIEN		(1 << 3)
+#define MC13783_REG_REGULATORMODE0_VIOLOEN		(1 << 6)
+#define MC13783_REG_REGULATORMODE0_VDIGEN		(1 << 9)
+#define MC13783_REG_REGULATORMODE0_VGENEN		(1 << 12)
+#define MC13783_REG_REGULATORMODE0_VRFDIGEN		(1 << 15)
+#define MC13783_REG_REGULATORMODE0_VRFREFEN		(1 << 18)
+#define MC13783_REG_REGULATORMODE0_VRFCPEN		(1 << 21)
+
+#define MC13783_REG_REGULATORMODE1		33
+#define MC13783_REG_REGULATORMODE1_VSIMEN		(1 << 0)
+#define MC13783_REG_REGULATORMODE1_VESIMEN		(1 << 3)
+#define MC13783_REG_REGULATORMODE1_VCAMEN		(1 << 6)
+#define MC13783_REG_REGULATORMODE1_VRFBGEN		(1 << 9)
+#define MC13783_REG_REGULATORMODE1_VVIBEN		(1 << 11)
+#define MC13783_REG_REGULATORMODE1_VRF1EN		(1 << 12)
+#define MC13783_REG_REGULATORMODE1_VRF2EN		(1 << 15)
+#define MC13783_REG_REGULATORMODE1_VMMC1EN		(1 << 18)
+#define MC13783_REG_REGULATORMODE1_VMMC2EN		(1 << 21)
+
+#define MC13783_REG_POWERMISC			34
+#define MC13783_REG_POWERMISC_GPO1EN			(1 << 6)
+#define MC13783_REG_POWERMISC_GPO2EN			(1 << 8)
+#define MC13783_REG_POWERMISC_GPO3EN			(1 << 10)
+#define MC13783_REG_POWERMISC_GPO4EN			(1 << 12)
+
+struct mc13783_regulator {
+	struct regulator_desc desc;
+	int reg;
+	int enable_bit;
+};
+
+static struct regulator_ops mc13783_regulator_ops;
+
+#define MC13783_DEFINE(prefix, _name, _reg)				\
+	[MC13783_ ## prefix ## _ ## _name] = {				\
+		.desc = {						\
+			.name = #prefix "_" #_name,			\
+			.ops = &mc13783_regulator_ops,			\
+			.type = REGULATOR_VOLTAGE,			\
+			.id = MC13783_ ## prefix ## _ ## _name,		\
+			.owner = THIS_MODULE,				\
+		},							\
+		.reg = MC13783_REG_ ## _reg,				\
+		.enable_bit = MC13783_REG_ ## _reg ## _ ## _name ## EN,	\
+	}
+
+#define MC13783_DEFINE_SW(_name, _reg) MC13783_DEFINE(SW, _name, _reg)
+#define MC13783_DEFINE_REGU(_name, _reg) MC13783_DEFINE(REGU, _name, _reg)
+
+static struct mc13783_regulator mc13783_regulators[] = {
+	MC13783_DEFINE_SW(SW3, SWITCHERS5),
+	MC13783_DEFINE_SW(PLL, SWITCHERS4),
+
+	MC13783_DEFINE_REGU(VAUDIO, REGULATORMODE0),
+	MC13783_DEFINE_REGU(VIOHI, REGULATORMODE0),
+	MC13783_DEFINE_REGU(VIOLO, REGULATORMODE0),
+	MC13783_DEFINE_REGU(VDIG, REGULATORMODE0),
+	MC13783_DEFINE_REGU(VGEN, REGULATORMODE0),
+	MC13783_DEFINE_REGU(VRFDIG, REGULATORMODE0),
+	MC13783_DEFINE_REGU(VRFREF, REGULATORMODE0),
+	MC13783_DEFINE_REGU(VRFCP, REGULATORMODE0),
+	MC13783_DEFINE_REGU(VSIM, REGULATORMODE1),
+	MC13783_DEFINE_REGU(VESIM, REGULATORMODE1),
+	MC13783_DEFINE_REGU(VCAM, REGULATORMODE1),
+	MC13783_DEFINE_REGU(VRFBG, REGULATORMODE1),
+	MC13783_DEFINE_REGU(VVIB, REGULATORMODE1),
+	MC13783_DEFINE_REGU(VRF1, REGULATORMODE1),
+	MC13783_DEFINE_REGU(VRF2, REGULATORMODE1),
+	MC13783_DEFINE_REGU(VMMC1, REGULATORMODE1),
+	MC13783_DEFINE_REGU(VMMC2, REGULATORMODE1),
+	MC13783_DEFINE_REGU(GPO1, POWERMISC),
+	MC13783_DEFINE_REGU(GPO2, POWERMISC),
+	MC13783_DEFINE_REGU(GPO3, POWERMISC),
+	MC13783_DEFINE_REGU(GPO4, POWERMISC),
+};
+
+struct mc13783_regulator_priv {
+	struct mc13783 *mc13783;
+	struct regulator_dev *regulators[];
+};
+
+static int mc13783_regulator_enable(struct regulator_dev *rdev)
+{
+	struct mc13783_regulator_priv *priv = rdev_get_drvdata(rdev);
+	int id = rdev_get_id(rdev);
+	int ret;
+
+	dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id);
+
+	mc13783_lock(priv->mc13783);
+	ret = mc13783_reg_rmw(priv->mc13783, mc13783_regulators[id].reg,
+			mc13783_regulators[id].enable_bit,
+			mc13783_regulators[id].enable_bit);
+	mc13783_unlock(priv->mc13783);
+
+	return ret;
+}
+
+static int mc13783_regulator_disable(struct regulator_dev *rdev)
+{
+	struct mc13783_regulator_priv *priv = rdev_get_drvdata(rdev);
+	int id = rdev_get_id(rdev);
+	int ret;
+
+	dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id);
+
+	mc13783_lock(priv->mc13783);
+	ret = mc13783_reg_rmw(priv->mc13783, mc13783_regulators[id].reg,
+			mc13783_regulators[id].enable_bit, 0);
+	mc13783_unlock(priv->mc13783);
+
+	return ret;
+}
+
+static int mc13783_regulator_is_enabled(struct regulator_dev *rdev)
+{
+	struct mc13783_regulator_priv *priv = rdev_get_drvdata(rdev);
+	int ret, id = rdev_get_id(rdev);
+	unsigned int val;
+
+	mc13783_lock(priv->mc13783);
+	ret = mc13783_reg_read(priv->mc13783, mc13783_regulators[id].reg, &val);
+	mc13783_unlock(priv->mc13783);
+
+	if (ret)
+		return ret;
+
+	return (val & mc13783_regulators[id].enable_bit) != 0;
+}
+
+static struct regulator_ops mc13783_regulator_ops = {
+	.enable = mc13783_regulator_enable,
+	.disable = mc13783_regulator_disable,
+	.is_enabled = mc13783_regulator_is_enabled,
+};
+
+static int __devinit mc13783_regulator_probe(struct platform_device *pdev)
+{
+	struct mc13783_regulator_priv *priv;
+	struct mc13783 *mc13783 = dev_get_drvdata(pdev->dev.parent);
+	struct mc13783_regulator_platform_data *pdata =
+		dev_get_platdata(&pdev->dev);
+	struct mc13783_regulator_init_data *init_data;
+	int i, ret;
+
+	dev_dbg(&pdev->dev, "mc13783_regulator_probe id %d\n", pdev->id);
+
+	priv = kzalloc(sizeof(*priv) +
+			pdata->num_regulators * sizeof(priv->regulators[0]),
+			GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->mc13783 = mc13783;
+
+	for (i = 0; i < pdata->num_regulators; i++) {
+		init_data = &pdata->regulators[i];
+		priv->regulators[i] = regulator_register(
+				&mc13783_regulators[init_data->id].desc,
+				&pdev->dev, init_data->init_data, priv);
+
+		if (IS_ERR(priv->regulators[i])) {
+			dev_err(&pdev->dev, "failed to register regulator %s\n",
+				mc13783_regulators[i].desc.name);
+			ret = PTR_ERR(priv->regulators[i]);
+			goto err;
+		}
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+err:
+	while (--i >= 0)
+		regulator_unregister(priv->regulators[i]);
+
+	kfree(priv);
+
+	return ret;
+}
+
+static int __devexit mc13783_regulator_remove(struct platform_device *pdev)
+{
+	struct mc13783_regulator_priv *priv = platform_get_drvdata(pdev);
+	struct mc13783_regulator_platform_data *pdata =
+		dev_get_platdata(&pdev->dev);
+	int i;
+
+	for (i = 0; i < pdata->num_regulators; i++)
+		regulator_unregister(priv->regulators[i]);
+
+	return 0;
+}
+
+static struct platform_driver mc13783_regulator_driver = {
+	.driver	= {
+		.name	= "mc13783-regulator",
+		.owner	= THIS_MODULE,
+	},
+	.remove		= __devexit_p(mc13783_regulator_remove),
+	.probe		= mc13783_regulator_probe,
+};
+
+static int __init mc13783_regulator_init(void)
+{
+	return platform_driver_register(&mc13783_regulator_driver);
+}
+subsys_initcall(mc13783_regulator_init);
+
+static void __exit mc13783_regulator_exit(void)
+{
+	platform_driver_unregister(&mc13783_regulator_driver);
+}
+module_exit(mc13783_regulator_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de");
+MODULE_DESCRIPTION("Regulator Driver for Freescale MC13783 PMIC");
+MODULE_ALIAS("platform:mc13783-regulator");

drivers/regulator/twl-regulator.c

@@ -12,6 +12,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/err.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
@@ -40,6 +41,12 @@ struct twlreg_info {
 	u8			table_len;
 	const u16		*table;
 
+	/* regulator specific turn-on delay */
+	u16			delay;
+
+	/* State REMAP default configuration */
+	u8			remap;
+
 	/* chip constraints on regulator behavior */
 	u16			min_mV;
 
@@ -128,6 +135,7 @@ static int twlreg_enable(struct regulator_dev *rdev)
 {
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
 	int			grp;
+	int			ret;
 
 	grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
 	if (grp < 0)
@@ -138,7 +146,11 @@ static int twlreg_enable(struct regulator_dev *rdev)
 	else
 		grp |= P1_GRP_6030;
 
-	return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp);
+	ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp);
+
+	udelay(info->delay);
+
+	return ret;
 }
 
 static int twlreg_disable(struct regulator_dev *rdev)
@@ -151,9 +163,9 @@ static int twlreg_disable(struct regulator_dev *rdev)
 		return grp;
 
 	if (twl_class_is_4030())
-		grp &= ~P1_GRP_4030;
+		grp &= ~(P1_GRP_4030 | P2_GRP_4030 | P3_GRP_4030);
 	else
-		grp &= ~P1_GRP_6030;
+		grp &= ~(P1_GRP_6030 | P2_GRP_6030 | P3_GRP_6030);
 
 	return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp);
 }
@@ -294,6 +306,18 @@ static const u16 VSIM_VSEL_table[] = {
 static const u16 VDAC_VSEL_table[] = {
 	1200, 1300, 1800, 1800,
 };
+static const u16 VDD1_VSEL_table[] = {
+	800, 1450,
+};
+static const u16 VDD2_VSEL_table[] = {
+	800, 1450, 1500,
+};
+static const u16 VIO_VSEL_table[] = {
+	1800, 1850,
+};
+static const u16 VINTANA2_VSEL_table[] = {
+	2500, 2750,
+};
 static const u16 VAUX1_6030_VSEL_table[] = {
 	1000, 1300, 1800, 2500,
 	2800, 2900, 3000, 3000,
@@ -414,20 +438,30 @@ static struct regulator_ops twlfixed_ops = {
 
 /*----------------------------------------------------------------------*/
 
-#define TWL4030_ADJUSTABLE_LDO(label, offset, num) \
-		TWL_ADJUSTABLE_LDO(label, offset, num, TWL4030)
-#define TWL4030_FIXED_LDO(label, offset, mVolts, num) \
-		TWL_FIXED_LDO(label, offset, mVolts, num, TWL4030)
-#define TWL6030_ADJUSTABLE_LDO(label, offset, num) \
-		TWL_ADJUSTABLE_LDO(label, offset, num, TWL6030)
-#define TWL6030_FIXED_LDO(label, offset, mVolts, num) \
-		TWL_FIXED_LDO(label, offset, mVolts, num, TWL6030)
-
-#define TWL_ADJUSTABLE_LDO(label, offset, num, family) { \
+#define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) \
+		TWL_ADJUSTABLE_LDO(label, offset, num, turnon_delay, \
+			remap_conf, TWL4030)
+#define TWL4030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \
+			remap_conf) \
+		TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \
+			remap_conf, TWL4030)
+#define TWL6030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, \
+			remap_conf) \
+		TWL_ADJUSTABLE_LDO(label, offset, num, turnon_delay, \
+			remap_conf, TWL6030)
+#define TWL6030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \
+			remap_conf) \
+		TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \
+			remap_conf, TWL6030)
+
+#define TWL_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf, \
+		family) { \
 	.base = offset, \
 	.id = num, \
 	.table_len = ARRAY_SIZE(label##_VSEL_table), \
 	.table = label##_VSEL_table, \
+	.delay = turnon_delay, \
+	.remap = remap_conf, \
 	.desc = { \
 		.name = #label, \
 		.id = family##_REG_##label, \
@@ -438,10 +472,13 @@ static struct regulator_ops twlfixed_ops = {
 		}, \
 	}
 
-#define TWL_FIXED_LDO(label, offset, mVolts, num, family) { \
+#define TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, remap_conf, \
+		family) { \
 	.base = offset, \
 	.id = num, \
 	.min_mV = mVolts, \
+	.delay = turnon_delay, \
+	.remap = remap_conf, \
 	.desc = { \
 		.name = #label, \
 		.id = family##_REG_##label, \
@@ -457,43 +494,41 @@ static struct regulator_ops twlfixed_ops = {
  * software control over them after boot.
  */
 static struct twlreg_info twl_regs[] = {
-	TWL4030_ADJUSTABLE_LDO(VAUX1, 0x17, 1),
-	TWL4030_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2),
-	TWL4030_ADJUSTABLE_LDO(VAUX2, 0x1b, 2),
-	TWL4030_ADJUSTABLE_LDO(VAUX3, 0x1f, 3),
-	TWL4030_ADJUSTABLE_LDO(VAUX4, 0x23, 4),
-	TWL4030_ADJUSTABLE_LDO(VMMC1, 0x27, 5),
-	TWL4030_ADJUSTABLE_LDO(VMMC2, 0x2b, 6),
-	/*
-	TWL4030_ADJUSTABLE_LDO(VPLL1, 0x2f, 7),
-	*/
-	TWL4030_ADJUSTABLE_LDO(VPLL2, 0x33, 8),
-	TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9),
-	TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10),
-	/*
-	TWL4030_ADJUSTABLE_LDO(VINTANA1, 0x3f, 11),
-	TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12),
-	TWL4030_ADJUSTABLE_LDO(VINTDIG, 0x47, 13),
-	TWL4030_SMPS(VIO, 0x4b, 14),
-	TWL4030_SMPS(VDD1, 0x55, 15),
-	TWL4030_SMPS(VDD2, 0x63, 16),
-	 */
-	TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17),
-	TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18),
-	TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19),
+	TWL4030_ADJUSTABLE_LDO(VAUX1, 0x17, 1, 100, 0x08),
+	TWL4030_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2, 100, 0x08),
+	TWL4030_ADJUSTABLE_LDO(VAUX2, 0x1b, 2, 100, 0x08),
+	TWL4030_ADJUSTABLE_LDO(VAUX3, 0x1f, 3, 100, 0x08),
+	TWL4030_ADJUSTABLE_LDO(VAUX4, 0x23, 4, 100, 0x08),
+	TWL4030_ADJUSTABLE_LDO(VMMC1, 0x27, 5, 100, 0x08),
+	TWL4030_ADJUSTABLE_LDO(VMMC2, 0x2b, 6, 100, 0x08),
+	TWL4030_ADJUSTABLE_LDO(VPLL1, 0x2f, 7, 100, 0x00),
+	TWL4030_ADJUSTABLE_LDO(VPLL2, 0x33, 8, 100, 0x08),
+	TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00),
+	TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08),
+	TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08),
+	TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08),
+	TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08),
+	TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08),
+	TWL4030_ADJUSTABLE_LDO(VDD1, 0x55, 15, 1000, 0x08),
+	TWL4030_ADJUSTABLE_LDO(VDD2, 0x63, 16, 1000, 0x08),
+	TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17, 100, 0x08),
+	TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18, 100, 0x08),
+	TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19, 150, 0x08),
 	/* VUSBCP is managed *only* by the USB subchip */
 
 	/* 6030 REG with base as PMC Slave Misc : 0x0030 */
-	TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1),
-	TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 2),
-	TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 3),
-	TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 4),
-	TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 5),
-	TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 7),
-	TWL6030_FIXED_LDO(VANA, 0x50, 2100, 15),
-	TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 16),
-	TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 17),
-	TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18)
+	/* Turnon-delay and remap configuration values for 6030 are not
+	   verified since the specification is not public */
+	TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1, 0, 0x08),
+	TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 2, 0, 0x08),
+	TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 3, 0, 0x08),
+	TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 4, 0, 0x08),
+	TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 5, 0, 0x08),
+	TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 7, 0, 0x08),
+	TWL6030_FIXED_LDO(VANA, 0x50, 2100, 15, 0, 0x08),
+	TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 16, 0, 0x08),
+	TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 17, 0, 0x08),
+	TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18, 0, 0x08)
 };
 
 static int twlreg_probe(struct platform_device *pdev)
@@ -525,6 +560,19 @@ static int twlreg_probe(struct platform_device *pdev)
 	c->valid_ops_mask &= REGULATOR_CHANGE_VOLTAGE
 				| REGULATOR_CHANGE_MODE
 				| REGULATOR_CHANGE_STATUS;
+	switch (pdev->id) {
+	case TWL4030_REG_VIO:
+	case TWL4030_REG_VDD1:
+	case TWL4030_REG_VDD2:
+	case TWL4030_REG_VPLL1:
+	case TWL4030_REG_VINTANA1:
+	case TWL4030_REG_VINTANA2:
+	case TWL4030_REG_VINTDIG:
+		c->always_on = true;
+		break;
+	default:
+		break;
+	}
 
 	rdev = regulator_register(&info->desc, &pdev->dev, initdata, info);
 	if (IS_ERR(rdev)) {
@@ -534,6 +582,9 @@ static int twlreg_probe(struct platform_device *pdev)
 	}
 	platform_set_drvdata(pdev, rdev);
 
+	twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_REMAP,
+						info->remap);
+
 	/* NOTE:  many regulators support short-circuit IRQs (presentable
 	 * as REGULATOR_OVER_CURRENT notifications?) configured via:
 	 *  - SC_CONFIG

drivers/regulator/wm831x-dcdc.c

@@ -19,6 +19,8 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/gpio.h>
 
 #include <linux/mfd/wm831x/core.h>
 #include <linux/mfd/wm831x/regulator.h>
@@ -39,6 +41,7 @@
 #define WM831X_DCDC_CONTROL_2     1
 #define WM831X_DCDC_ON_CONFIG     2
 #define WM831X_DCDC_SLEEP_CONTROL 3
+#define WM831X_DCDC_DVS_CONTROL   4
 
 /*
  * Shared
@@ -50,6 +53,10 @@ struct wm831x_dcdc {
 	int base;
 	struct wm831x *wm831x;
 	struct regulator_dev *regulator;
+	int dvs_gpio;
+	int dvs_gpio_state;
+	int on_vsel;
+	int dvs_vsel;
 };
 
 static int wm831x_dcdc_is_enabled(struct regulator_dev *rdev)
@@ -240,11 +247,9 @@ static int wm831x_buckv_list_voltage(struct regulator_dev *rdev,
 	return -EINVAL;
 }
 
-static int wm831x_buckv_set_voltage_int(struct regulator_dev *rdev, int reg,
+static int wm831x_buckv_select_min_voltage(struct regulator_dev *rdev,
 					   int min_uV, int max_uV)
 {
-	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
-	struct wm831x *wm831x = dcdc->wm831x;
 	u16 vsel;
 
 	if (min_uV < 600000)
@@ -257,39 +262,126 @@ static int wm831x_buckv_set_voltage_int(struct regulator_dev *rdev, int reg,
 	if (wm831x_buckv_list_voltage(rdev, vsel) > max_uV)
 		return -EINVAL;
 
-	return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_VSEL_MASK, vsel);
+	return vsel;
+}
+
+static int wm831x_buckv_select_max_voltage(struct regulator_dev *rdev,
+					   int min_uV, int max_uV)
+{
+	u16 vsel;
+
+	if (max_uV < 600000 || max_uV > 1800000)
+		return -EINVAL;
+
+	vsel = ((max_uV - 600000) / 12500) + 8;
+
+	if (wm831x_buckv_list_voltage(rdev, vsel) < min_uV ||
+	    wm831x_buckv_list_voltage(rdev, vsel) < max_uV)
+		return -EINVAL;
+
+	return vsel;
+}
+
+static int wm831x_buckv_set_dvs(struct regulator_dev *rdev, int state)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+
+	if (state == dcdc->dvs_gpio_state)
+		return 0;
+
+	dcdc->dvs_gpio_state = state;
+	gpio_set_value(dcdc->dvs_gpio, state);
+
+	/* Should wait for DVS state change to be asserted if we have
+	 * a GPIO for it, for now assume the device is configured
+	 * for the fastest possible transition.
+	 */
+
+	return 0;
 }
 
 static int wm831x_buckv_set_voltage(struct regulator_dev *rdev,
 				    int min_uV, int max_uV)
 {
 	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
-	u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+	struct wm831x *wm831x = dcdc->wm831x;
+	int on_reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+	int dvs_reg = dcdc->base + WM831X_DCDC_DVS_CONTROL;
+	int vsel, ret;
+
+	vsel = wm831x_buckv_select_min_voltage(rdev, min_uV, max_uV);
+	if (vsel < 0)
+		return vsel;
+
+	/* If this value is already set then do a GPIO update if we can */
+	if (dcdc->dvs_gpio && dcdc->on_vsel == vsel)
+		return wm831x_buckv_set_dvs(rdev, 0);
+
+	if (dcdc->dvs_gpio && dcdc->dvs_vsel == vsel)
+		return wm831x_buckv_set_dvs(rdev, 1);
+
+	/* Always set the ON status to the minimum voltage */
+	ret = wm831x_set_bits(wm831x, on_reg, WM831X_DC1_ON_VSEL_MASK, vsel);
+	if (ret < 0)
+		return ret;
+	dcdc->on_vsel = vsel;
+
+	if (!dcdc->dvs_gpio)
+		return ret;
+
+	/* Kick the voltage transition now */
+	ret = wm831x_buckv_set_dvs(rdev, 0);
+	if (ret < 0)
+		return ret;
+
+	/* Set the high voltage as the DVS voltage.  This is optimised
+	 * for CPUfreq usage, most processors will keep the maximum
+	 * voltage constant and lower the minimum with the frequency. */
+	vsel = wm831x_buckv_select_max_voltage(rdev, min_uV, max_uV);
+	if (vsel < 0) {
+		/* This should never happen - at worst the same vsel
+		 * should be chosen */
+		WARN_ON(vsel < 0);
+		return 0;
+	}
+
+	/* Don't bother if it's the same VSEL we're already using */
+	if (vsel == dcdc->on_vsel)
+		return 0;
 
-	return wm831x_buckv_set_voltage_int(rdev, reg, min_uV, max_uV);
+	ret = wm831x_set_bits(wm831x, dvs_reg, WM831X_DC1_DVS_VSEL_MASK, vsel);
+	if (ret == 0)
+		dcdc->dvs_vsel = vsel;
+	else
+		dev_warn(wm831x->dev, "Failed to set DCDC DVS VSEL: %d\n",
+			 ret);
+
+	return 0;
 }
 
 static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev,
 					    int uV)
 {
 	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
 	u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
+	int vsel;
+
+	vsel = wm831x_buckv_select_min_voltage(rdev, uV, uV);
+	if (vsel < 0)
+		return vsel;
 
-	return wm831x_buckv_set_voltage_int(rdev, reg, uV, uV);
+	return wm831x_set_bits(wm831x, reg, WM831X_DC1_SLP_VSEL_MASK, vsel);
 }
 
 static int wm831x_buckv_get_voltage(struct regulator_dev *rdev)
 {
 	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
-	struct wm831x *wm831x = dcdc->wm831x;
-	u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
-	int val;
 
-	val = wm831x_reg_read(wm831x, reg);
-	if (val < 0)
-		return val;
-
-	return wm831x_buckv_list_voltage(rdev, val & WM831X_DC1_ON_VSEL_MASK);
+	if (dcdc->dvs_gpio && dcdc->dvs_gpio_state)
+		return wm831x_buckv_list_voltage(rdev, dcdc->dvs_vsel);
+	else
+		return wm831x_buckv_list_voltage(rdev, dcdc->on_vsel);
 }
 
 /* Current limit options */
@@ -346,6 +438,64 @@ static struct regulator_ops wm831x_buckv_ops = {
 	.set_suspend_mode = wm831x_dcdc_set_suspend_mode,
 };
 
+/*
+ * Set up DVS control.  We just log errors since we can still run
+ * (with reduced performance) if we fail.
+ */
+static __devinit void wm831x_buckv_dvs_init(struct wm831x_dcdc *dcdc,
+					    struct wm831x_buckv_pdata *pdata)
+{
+	struct wm831x *wm831x = dcdc->wm831x;
+	int ret;
+	u16 ctrl;
+
+	if (!pdata || !pdata->dvs_gpio)
+		return;
+
+	switch (pdata->dvs_control_src) {
+	case 1:
+		ctrl = 2 << WM831X_DC1_DVS_SRC_SHIFT;
+		break;
+	case 2:
+		ctrl = 3 << WM831X_DC1_DVS_SRC_SHIFT;
+		break;
+	default:
+		dev_err(wm831x->dev, "Invalid DVS control source %d for %s\n",
+			pdata->dvs_control_src, dcdc->name);
+		return;
+	}
+
+	ret = wm831x_set_bits(wm831x, dcdc->base + WM831X_DCDC_DVS_CONTROL,
+			      WM831X_DC1_DVS_SRC_MASK, ctrl);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to set %s DVS source: %d\n",
+			dcdc->name, ret);
+		return;
+	}
+
+	ret = gpio_request(pdata->dvs_gpio, "DCDC DVS");
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to get %s DVS GPIO: %d\n",
+			dcdc->name, ret);
+		return;
+	}
+
+	/* gpiolib won't let us read the GPIO status so pick the higher
+	 * of the two existing voltages so we take it as platform data.
+	 */
+	dcdc->dvs_gpio_state = pdata->dvs_init_state;
+
+	ret = gpio_direction_output(pdata->dvs_gpio, dcdc->dvs_gpio_state);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to enable %s DVS GPIO: %d\n",
+			dcdc->name, ret);
+		gpio_free(pdata->dvs_gpio);
+		return;
+	}
+
+	dcdc->dvs_gpio = pdata->dvs_gpio;
+}
+
 static __devinit int wm831x_buckv_probe(struct platform_device *pdev)
 {
 	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
@@ -384,6 +534,23 @@ static __devinit int wm831x_buckv_probe(struct platform_device *pdev)
 	dcdc->desc.ops = &wm831x_buckv_ops;
 	dcdc->desc.owner = THIS_MODULE;
 
+	ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to read ON VSEL: %d\n", ret);
+		goto err;
+	}
+	dcdc->on_vsel = ret & WM831X_DC1_ON_VSEL_MASK;
+
+	ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to read DVS VSEL: %d\n", ret);
+		goto err;
+	}
+	dcdc->dvs_vsel = ret & WM831X_DC1_DVS_VSEL_MASK;
+
+	if (pdata->dcdc[id])
+		wm831x_buckv_dvs_init(dcdc, pdata->dcdc[id]->driver_data);
+
 	dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
 					     pdata->dcdc[id], dcdc);
 	if (IS_ERR(dcdc->regulator)) {
@@ -422,6 +589,8 @@ static __devinit int wm831x_buckv_probe(struct platform_device *pdev)
 err_regulator:
 	regulator_unregister(dcdc->regulator);
 err:
+	if (dcdc->dvs_gpio)
+		gpio_free(dcdc->dvs_gpio);
 	kfree(dcdc);
 	return ret;
 }
@@ -434,6 +603,8 @@ static __devexit int wm831x_buckv_remove(struct platform_device *pdev)
 	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "HC"), dcdc);
 	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
 	regulator_unregister(dcdc->regulator);
+	if (dcdc->dvs_gpio)
+		gpio_free(dcdc->dvs_gpio);
 	kfree(dcdc);
 
 	return 0;

drivers/regulator/wm831x-ldo.c

@@ -470,7 +470,7 @@ static unsigned int wm831x_aldo_get_mode(struct regulator_dev *rdev)
 	struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
 	struct wm831x *wm831x = ldo->wm831x;
 	int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
-	unsigned int ret;
+	int ret;
 
 	ret = wm831x_reg_read(wm831x, on_reg);
 	if (ret < 0)

include/linux/mfd/wm831x/pdata.h

@@ -41,6 +41,23 @@ struct wm831x_battery_pdata {
 	int timeout;        /** Charge cycle timeout, in minutes */
 };
 
+/**
+ * Configuration for the WM831x DC-DC BuckWise convertors.  This
+ * should be passed as driver_data in the regulator_init_data.
+ *
+ * Currently all the configuration is for the fast DVS switching
+ * support of the devices.  This allows MFPs on the device to be
+ * configured as an input to switch between two output voltages,
+ * allowing voltage transitions without the expense of an access over
+ * I2C or SPI buses.
+ */
+struct wm831x_buckv_pdata {
+	int dvs_gpio;        /** CPU GPIO to use for DVS switching */
+	int dvs_control_src; /** Hardware DVS source to use (1 or 2) */
+	int dvs_init_state;  /** DVS state to expect on startup */
+	int dvs_state_gpio;  /** CPU GPIO to use for monitoring status */
+};
+
 /* Sources for status LED configuration.  Values are register values
  * plus 1 to allow for a zero default for preserve.
  */

include/linux/regulator/consumer.h

@@ -35,6 +35,8 @@
 #ifndef __LINUX_REGULATOR_CONSUMER_H_
 #define __LINUX_REGULATOR_CONSUMER_H_
 
+#include <linux/device.h>
+
 /*
  * Regulator operating modes.
  *

include/linux/regulator/machine.h

@@ -43,16 +43,20 @@ struct regulator;
 /**
  * struct regulator_state - regulator state during low power system states
  *
- * This describes a regulators state during a system wide low power state.
+ * This describes a regulators state during a system wide low power
+ * state.  One of enabled or disabled must be set for the
+ * configuration to be applied.
  *
  * @uV: Operating voltage during suspend.
  * @mode: Operating mode during suspend.
  * @enabled: Enabled during suspend.
+ * @disabled: Disabled during suspend.
  */
 struct regulator_state {
 	int uV;	/* suspend voltage */
 	unsigned int mode; /* suspend regulator operating mode */
 	int enabled; /* is regulator enabled in this suspend state */
+	int disabled; /* is the regulator disbled in this suspend state */
 };
 
 /**

include/linux/regulator/max8660.h

+/*
+ * max8660.h  --  Voltage regulation for the Maxim 8660/8661
+ *
+ * Copyright (C) 2009 Wolfram Sang, Pengutronix e.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_REGULATOR_MAX8660_H
+#define __LINUX_REGULATOR_MAX8660_H
+
+#include <linux/regulator/machine.h>
+
+enum {
+	MAX8660_V3,
+	MAX8660_V4,
+	MAX8660_V5,
+	MAX8660_V6,
+	MAX8660_V7,
+	MAX8660_V_END,
+};
+
+/**
+ * max8660_subdev_data - regulator subdev data
+ * @id: regulator id
+ * @name: regulator name
+ * @platform_data: regulator init data
+ */
+struct max8660_subdev_data {
+	int				id;
+	char				*name;
+	struct regulator_init_data	*platform_data;
+};
+
+/**
+ * max8660_platform_data - platform data for max8660
+ * @num_subdevs: number of regulators used
+ * @subdevs: pointer to regulators used
+ * @en34_is_high: if EN34 is driven high, regulators cannot be en-/disabled.
+ */
+struct max8660_platform_data {
+	int num_subdevs;
+	struct max8660_subdev_data *subdevs;
+	unsigned en34_is_high:1;
+};
+#endif