Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Replace 40c7869b kludge
  [MIPS] Lasat: Fix built in separate object directory.
  [MIPS] Malta: Fix software reset on big endian
  [MIPS] pnx8xxx: move to clocksource
  [MIPS] Wrong CONFIG option prevents setup of DMA zone.

arch/mips/kernel/setup.c

@@ -269,7 +269,7 @@ static void __init bootmem_init(void)
 
 static void __init bootmem_init(void)
 {
-	unsigned long init_begin, reserved_end;
+	unsigned long reserved_end;
 	unsigned long mapstart = ~0UL;
 	unsigned long bootmap_size;
 	int i;
@@ -344,7 +344,6 @@ static void __init bootmem_init(void)
 					 min_low_pfn, max_low_pfn);
 
 
-	init_begin = PFN_UP(__pa_symbol(&__init_begin));
 	for (i = 0; i < boot_mem_map.nr_map; i++) {
 		unsigned long start, end;
 
@@ -352,8 +351,8 @@ static void __init bootmem_init(void)
 		end = PFN_DOWN(boot_mem_map.map[i].addr
 				+ boot_mem_map.map[i].size);
 
-		if (start <= init_begin)
-			start = init_begin;
+		if (start <= min_low_pfn)
+			start = min_low_pfn;
 		if (start >= end)
 			continue;
 

arch/mips/lasat/image/Makefile

@@ -12,11 +12,11 @@ endif
 
 MKLASATIMG = mklasatimg
 MKLASATIMG_ARCH = mq2,mqpro,sp100,sp200
-KERNEL_IMAGE = $(TOPDIR)/vmlinux
+KERNEL_IMAGE = vmlinux
 KERNEL_START = $(shell $(NM) $(KERNEL_IMAGE) | grep " _text" | cut -f1 -d\ )
 KERNEL_ENTRY = $(shell $(NM) $(KERNEL_IMAGE) | grep kernel_entry | cut -f1 -d\ )
 
-LDSCRIPT= -L$(obj) -Tromscript.normal
+LDSCRIPT= -L$(srctree)/$(src) -Tromscript.normal
 
 HEAD_DEFINES := -D_kernel_start=0x$(KERNEL_START) \
 		-D_kernel_entry=0x$(KERNEL_ENTRY) \
@@ -24,7 +24,7 @@ HEAD_DEFINES := -D_kernel_start=0x$(KERNEL_START) \
 		-D TIMESTAMP=$(shell date +%s)
 
 $(obj)/head.o: $(obj)/head.S $(KERNEL_IMAGE)
-	$(CC) -fno-pic $(HEAD_DEFINES) -I$(TOPDIR)/include -c -o $@ $<
+	$(CC) -fno-pic $(HEAD_DEFINES) $(LINUXINCLUDE) -c -o $@ $<
 
 OBJECTS = head.o kImage.o
 

arch/mips/mips-boards/generic/memory.c

@@ -169,7 +169,6 @@ void __init prom_meminit(void)
 
 void __init prom_free_prom_memory(void)
 {
-#if 0 /* for now ...  */
 	unsigned long addr;
 	int i;
 
@@ -181,5 +180,4 @@ void __init prom_free_prom_memory(void)
 		free_init_pages("prom memory",
 				addr, addr + boot_mem_map.map[i].size);
 	}
-#endif
 }

arch/mips/mips-boards/generic/reset.c

@@ -39,16 +39,18 @@ static void atlas_machine_power_off(void);
 
 static void mips_machine_restart(char *command)
 {
-	unsigned int __iomem *softres_reg = ioremap(SOFTRES_REG, sizeof(unsigned int));
+	unsigned int __iomem *softres_reg =
+		ioremap(SOFTRES_REG, sizeof(unsigned int));
 
-	writew(GORESET, softres_reg);
+	__raw_writel(GORESET, softres_reg);
 }
 
 static void mips_machine_halt(void)
 {
-        unsigned int __iomem *softres_reg = ioremap(SOFTRES_REG, sizeof(unsigned int));
+	unsigned int __iomem *softres_reg =
+		ioremap(SOFTRES_REG, sizeof(unsigned int));
 
-	writew(GORESET, softres_reg);
+	__raw_writel(GORESET, softres_reg);
 }
 
 #if defined(CONFIG_MIPS_ATLAS)

arch/mips/mm/dma-default.c

@@ -45,7 +45,7 @@ static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
 	/* ignore region specifiers */
 	gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
 
-#ifdef CONFIG_ZONE_DMA32
+#ifdef CONFIG_ZONE_DMA
 	if (dev == NULL)
 		gfp |= __GFP_DMA;
 	else if (dev->coherent_dma_mask < DMA_BIT_MASK(24))

arch/mips/philips/pnx8550/common/time.c

@@ -22,7 +22,6 @@
 #include <linux/kernel_stat.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
-#include <linux/module.h>
 
 #include <asm/bootinfo.h>
 #include <asm/cpu.h>
@@ -41,11 +40,60 @@ static cycle_t hpt_read(void)
 	return read_c0_count2();
 }
 
+static struct clocksource pnx_clocksource = {
+	.name		= "pnx8xxx",
+	.rating		= 200,
+	.read		= hpt_read,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
 static void timer_ack(void)
 {
 	write_c0_compare(cpj);
 }
 
+static irqreturn_t pnx8xxx_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *c = dev_id;
+
+	/* clear MATCH, signal the event */
+	c->event_handler(c);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction pnx8xxx_timer_irq = {
+	.handler	= pnx8xxx_timer_interrupt,
+	.flags		= IRQF_DISABLED | IRQF_PERCPU,
+	.name		= "pnx8xxx_timer",
+};
+
+static irqreturn_t monotonic_interrupt(int irq, void *dev_id)
+{
+	/* Timer 2 clear interrupt */
+	write_c0_compare2(-1);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction monotonic_irqaction = {
+	.handler = monotonic_interrupt,
+	.flags = IRQF_DISABLED,
+	.name = "Monotonic timer",
+};
+
+static int pnx8xxx_set_next_event(unsigned long delta,
+				struct clock_event_device *evt)
+{
+	write_c0_compare(delta);
+	return 0;
+}
+
+static struct clock_event_device pnx8xxx_clockevent = {
+	.name		= "pnx8xxx_clockevent",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event = pnx8xxx_set_next_event,
+};
+
 /*
  * plat_time_init() - it does the following things:
  *
@@ -58,11 +106,34 @@ static void timer_ack(void)
 
 __init void plat_time_init(void)
 {
+	unsigned int             configPR;
 	unsigned int             n;
 	unsigned int             m;
 	unsigned int             p;
 	unsigned int             pow2p;
 
+	clockevents_register_device(&pnx8xxx_clockevent);
+	clocksource_register(&pnx_clocksource);
+
+	setup_irq(PNX8550_INT_TIMER1, &pnx8xxx_timer_irq);
+	setup_irq(PNX8550_INT_TIMER2, &monotonic_irqaction);
+
+	/* Timer 1 start */
+	configPR = read_c0_config7();
+	configPR &= ~0x00000008;
+	write_c0_config7(configPR);
+
+	/* Timer 2 start */
+	configPR = read_c0_config7();
+	configPR &= ~0x00000010;
+	write_c0_config7(configPR);
+
+	/* Timer 3 stop */
+	configPR = read_c0_config7();
+	configPR |= 0x00000020;
+	write_c0_config7(configPR);
+
+
         /* PLL0 sets MIPS clock (PLL1 <=> TM1, PLL6 <=> TM2, PLL5 <=> mem) */
         /* (but only if CLK_MIPS_CTL select value [bits 3:1] is 1:  FIXME) */
 
@@ -87,42 +158,6 @@ __init void plat_time_init(void)
 	write_c0_count2(0);
 	write_c0_compare2(0xffffffff);
 
-	clocksource_mips.read = hpt_read;
-	mips_timer_ack = timer_ack;
-}
-
-static irqreturn_t monotonic_interrupt(int irq, void *dev_id)
-{
-	/* Timer 2 clear interrupt */
-	write_c0_compare2(-1);
-	return IRQ_HANDLED;
 }
 
-static struct irqaction monotonic_irqaction = {
-	.handler = monotonic_interrupt,
-	.flags = IRQF_DISABLED,
-	.name = "Monotonic timer",
-};
 
-void __init plat_timer_setup(struct irqaction *irq)
-{
-	int configPR;
-
-	setup_irq(PNX8550_INT_TIMER1, irq);
-	setup_irq(PNX8550_INT_TIMER2, &monotonic_irqaction);
-
-	/* Timer 1 start */
-	configPR = read_c0_config7();
-	configPR &= ~0x00000008;
-	write_c0_config7(configPR);
-
-	/* Timer 2 start */
-	configPR = read_c0_config7();
-	configPR &= ~0x00000010;
-	write_c0_config7(configPR);
-
-	/* Timer 3 stop */
-	configPR = read_c0_config7();
-	configPR |= 0x00000020;
-	write_c0_config7(configPR);
-}