Commit 23904815 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 platform changes from Ingo Molnar.

Removes the Moorestown platform that nobody ever used.

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform: Move APIC ID validity check into platform APIC code
  x86/olpc/xo15/sci: Enable lid close wakeup control
  x86/geode/net5501: Add platform driver for Soekris Engineering net5501
  x86/geode/alix2: Supplement driver to include GPIO button support
  x86/mid/powerbtn: Use MSIC read/write instead of ipc_scu
  x86/mid/thermal: Turn off thermistor
  x86/mid/thermal: Add msic_thermal alias
  x86/mid/thermal: Convert to use Intel MSIC API
  x86/mid/scu_ipc: Remove Moorestown support
  x86/mid: Kill off Moorestown
  x86/mrst: Add msic_thermal platform support
  x86/config: Select MSIC MFD driver on Intel Medfield platform
  x86/mid: Remove Intel Moorestown
  x86/mrst: Set ISA bus type for fake MP IRQs
  x86/ioapic: Use legacy_pic to set correct gsi-irq mapping
parents 754b9800 fa63030e
...@@ -422,27 +422,6 @@ if X86_WANT_INTEL_MID ...@@ -422,27 +422,6 @@ if X86_WANT_INTEL_MID
config X86_INTEL_MID config X86_INTEL_MID
bool bool
config X86_MRST
bool "Moorestown MID platform"
depends on PCI
depends on PCI_GOANY
depends on X86_IO_APIC
select X86_INTEL_MID
select SFI
select DW_APB_TIMER
select APB_TIMER
select I2C
select SPI
select INTEL_SCU_IPC
select X86_PLATFORM_DEVICES
---help---
Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin
Internet Device(MID) platform. Moorestown consists of two chips:
Lincroft (CPU core, graphics, and memory controller) and Langwell IOH.
Unlike standard x86 PCs, Moorestown does not have many legacy devices
nor standard legacy replacement devices/features. e.g. Moorestown does
not contain i8259, i8254, HPET, legacy BIOS, most of the io ports.
config X86_MDFLD config X86_MDFLD
bool "Medfield MID platform" bool "Medfield MID platform"
depends on PCI depends on PCI
...@@ -456,6 +435,7 @@ config X86_MDFLD ...@@ -456,6 +435,7 @@ config X86_MDFLD
select SPI select SPI
select INTEL_SCU_IPC select INTEL_SCU_IPC
select X86_PLATFORM_DEVICES select X86_PLATFORM_DEVICES
select MFD_INTEL_MSIC
---help--- ---help---
Medfield is Intel's Low Power Intel Architecture (LPIA) based Moblin Medfield is Intel's Low Power Intel Architecture (LPIA) based Moblin
Internet Device(MID) platform. Internet Device(MID) platform.
...@@ -2139,6 +2119,12 @@ config ALIX ...@@ -2139,6 +2119,12 @@ config ALIX
Note: You have to set alix.force=1 for boards with Award BIOS. Note: You have to set alix.force=1 for boards with Award BIOS.
config NET5501
bool "Soekris Engineering net5501 System Support (LEDS, GPIO, etc)"
select GPIOLIB
---help---
This option enables system support for the Soekris Engineering net5501.
endif # X86_32 endif # X86_32
config AMD_NB config AMD_NB
......
...@@ -288,6 +288,7 @@ struct apic { ...@@ -288,6 +288,7 @@ struct apic {
int (*probe)(void); int (*probe)(void);
int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id); int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
int (*apic_id_valid)(int apicid);
int (*apic_id_registered)(void); int (*apic_id_registered)(void);
u32 irq_delivery_mode; u32 irq_delivery_mode;
...@@ -532,6 +533,11 @@ static inline unsigned int read_apic_id(void) ...@@ -532,6 +533,11 @@ static inline unsigned int read_apic_id(void)
return apic->get_apic_id(reg); return apic->get_apic_id(reg);
} }
static inline int default_apic_id_valid(int apicid)
{
return x2apic_mode || (apicid < 255);
}
extern void default_setup_apic_routing(void); extern void default_setup_apic_routing(void);
extern struct apic apic_noop; extern struct apic apic_noop;
......
...@@ -26,8 +26,8 @@ extern struct sfi_rtc_table_entry sfi_mrtc_array[]; ...@@ -26,8 +26,8 @@ extern struct sfi_rtc_table_entry sfi_mrtc_array[];
* identified via MSRs. * identified via MSRs.
*/ */
enum mrst_cpu_type { enum mrst_cpu_type {
MRST_CPU_CHIP_LINCROFT = 1, /* 1 was Moorestown */
MRST_CPU_CHIP_PENWELL, MRST_CPU_CHIP_PENWELL = 2,
}; };
extern enum mrst_cpu_type __mrst_cpu_chip; extern enum mrst_cpu_type __mrst_cpu_chip;
......
...@@ -180,6 +180,7 @@ static struct apic apic_flat = { ...@@ -180,6 +180,7 @@ static struct apic apic_flat = {
.name = "flat", .name = "flat",
.probe = flat_probe, .probe = flat_probe,
.acpi_madt_oem_check = flat_acpi_madt_oem_check, .acpi_madt_oem_check = flat_acpi_madt_oem_check,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = flat_apic_id_registered, .apic_id_registered = flat_apic_id_registered,
.irq_delivery_mode = dest_LowestPrio, .irq_delivery_mode = dest_LowestPrio,
...@@ -337,6 +338,7 @@ static struct apic apic_physflat = { ...@@ -337,6 +338,7 @@ static struct apic apic_physflat = {
.name = "physical flat", .name = "physical flat",
.probe = physflat_probe, .probe = physflat_probe,
.acpi_madt_oem_check = physflat_acpi_madt_oem_check, .acpi_madt_oem_check = physflat_acpi_madt_oem_check,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = flat_apic_id_registered, .apic_id_registered = flat_apic_id_registered,
.irq_delivery_mode = dest_Fixed, .irq_delivery_mode = dest_Fixed,
......
...@@ -124,6 +124,7 @@ struct apic apic_noop = { ...@@ -124,6 +124,7 @@ struct apic apic_noop = {
.probe = noop_probe, .probe = noop_probe,
.acpi_madt_oem_check = NULL, .acpi_madt_oem_check = NULL,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = noop_apic_id_registered, .apic_id_registered = noop_apic_id_registered,
.irq_delivery_mode = dest_LowestPrio, .irq_delivery_mode = dest_LowestPrio,
......
...@@ -56,6 +56,12 @@ static unsigned int read_xapic_id(void) ...@@ -56,6 +56,12 @@ static unsigned int read_xapic_id(void)
return get_apic_id(apic_read(APIC_ID)); return get_apic_id(apic_read(APIC_ID));
} }
static int numachip_apic_id_valid(int apicid)
{
/* Trust what bootloader passes in MADT */
return 1;
}
static int numachip_apic_id_registered(void) static int numachip_apic_id_registered(void)
{ {
return physid_isset(read_xapic_id(), phys_cpu_present_map); return physid_isset(read_xapic_id(), phys_cpu_present_map);
...@@ -223,10 +229,11 @@ static int __init numachip_system_init(void) ...@@ -223,10 +229,11 @@ static int __init numachip_system_init(void)
} }
early_initcall(numachip_system_init); early_initcall(numachip_system_init);
static int numachip_acpi_madt_oem_check(char *oem_id, char *oem_table_id) static int __cpuinit numachip_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{ {
if (!strncmp(oem_id, "NUMASC", 6)) { if (!strncmp(oem_id, "NUMASC", 6)) {
numachip_system = 1; numachip_system = 1;
setup_force_cpu_cap(X86_FEATURE_X2APIC);
return 1; return 1;
} }
...@@ -238,6 +245,7 @@ static struct apic apic_numachip __refconst = { ...@@ -238,6 +245,7 @@ static struct apic apic_numachip __refconst = {
.name = "NumaConnect system", .name = "NumaConnect system",
.probe = numachip_probe, .probe = numachip_probe,
.acpi_madt_oem_check = numachip_acpi_madt_oem_check, .acpi_madt_oem_check = numachip_acpi_madt_oem_check,
.apic_id_valid = numachip_apic_id_valid,
.apic_id_registered = numachip_apic_id_registered, .apic_id_registered = numachip_apic_id_registered,
.irq_delivery_mode = dest_Fixed, .irq_delivery_mode = dest_Fixed,
......
...@@ -198,6 +198,7 @@ static struct apic apic_bigsmp = { ...@@ -198,6 +198,7 @@ static struct apic apic_bigsmp = {
.name = "bigsmp", .name = "bigsmp",
.probe = probe_bigsmp, .probe = probe_bigsmp,
.acpi_madt_oem_check = NULL, .acpi_madt_oem_check = NULL,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = bigsmp_apic_id_registered, .apic_id_registered = bigsmp_apic_id_registered,
.irq_delivery_mode = dest_Fixed, .irq_delivery_mode = dest_Fixed,
......
...@@ -625,6 +625,7 @@ static struct apic __refdata apic_es7000_cluster = { ...@@ -625,6 +625,7 @@ static struct apic __refdata apic_es7000_cluster = {
.name = "es7000", .name = "es7000",
.probe = probe_es7000, .probe = probe_es7000,
.acpi_madt_oem_check = es7000_acpi_madt_oem_check_cluster, .acpi_madt_oem_check = es7000_acpi_madt_oem_check_cluster,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = es7000_apic_id_registered, .apic_id_registered = es7000_apic_id_registered,
.irq_delivery_mode = dest_LowestPrio, .irq_delivery_mode = dest_LowestPrio,
...@@ -690,6 +691,7 @@ static struct apic __refdata apic_es7000 = { ...@@ -690,6 +691,7 @@ static struct apic __refdata apic_es7000 = {
.name = "es7000", .name = "es7000",
.probe = probe_es7000, .probe = probe_es7000,
.acpi_madt_oem_check = es7000_acpi_madt_oem_check, .acpi_madt_oem_check = es7000_acpi_madt_oem_check,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = es7000_apic_id_registered, .apic_id_registered = es7000_apic_id_registered,
.irq_delivery_mode = dest_Fixed, .irq_delivery_mode = dest_Fixed,
......
...@@ -478,6 +478,7 @@ static struct apic __refdata apic_numaq = { ...@@ -478,6 +478,7 @@ static struct apic __refdata apic_numaq = {
.name = "NUMAQ", .name = "NUMAQ",
.probe = probe_numaq, .probe = probe_numaq,
.acpi_madt_oem_check = NULL, .acpi_madt_oem_check = NULL,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = numaq_apic_id_registered, .apic_id_registered = numaq_apic_id_registered,
.irq_delivery_mode = dest_LowestPrio, .irq_delivery_mode = dest_LowestPrio,
......
...@@ -92,6 +92,7 @@ static struct apic apic_default = { ...@@ -92,6 +92,7 @@ static struct apic apic_default = {
.name = "default", .name = "default",
.probe = probe_default, .probe = probe_default,
.acpi_madt_oem_check = NULL, .acpi_madt_oem_check = NULL,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = default_apic_id_registered, .apic_id_registered = default_apic_id_registered,
.irq_delivery_mode = dest_LowestPrio, .irq_delivery_mode = dest_LowestPrio,
......
...@@ -496,6 +496,7 @@ static struct apic apic_summit = { ...@@ -496,6 +496,7 @@ static struct apic apic_summit = {
.name = "summit", .name = "summit",
.probe = probe_summit, .probe = probe_summit,
.acpi_madt_oem_check = summit_acpi_madt_oem_check, .acpi_madt_oem_check = summit_acpi_madt_oem_check,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = summit_apic_id_registered, .apic_id_registered = summit_apic_id_registered,
.irq_delivery_mode = dest_LowestPrio, .irq_delivery_mode = dest_LowestPrio,
......
...@@ -213,6 +213,7 @@ static struct apic apic_x2apic_cluster = { ...@@ -213,6 +213,7 @@ static struct apic apic_x2apic_cluster = {
.name = "cluster x2apic", .name = "cluster x2apic",
.probe = x2apic_cluster_probe, .probe = x2apic_cluster_probe,
.acpi_madt_oem_check = x2apic_acpi_madt_oem_check, .acpi_madt_oem_check = x2apic_acpi_madt_oem_check,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = x2apic_apic_id_registered, .apic_id_registered = x2apic_apic_id_registered,
.irq_delivery_mode = dest_LowestPrio, .irq_delivery_mode = dest_LowestPrio,
......
...@@ -119,6 +119,7 @@ static struct apic apic_x2apic_phys = { ...@@ -119,6 +119,7 @@ static struct apic apic_x2apic_phys = {
.name = "physical x2apic", .name = "physical x2apic",
.probe = x2apic_phys_probe, .probe = x2apic_phys_probe,
.acpi_madt_oem_check = x2apic_acpi_madt_oem_check, .acpi_madt_oem_check = x2apic_acpi_madt_oem_check,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = x2apic_apic_id_registered, .apic_id_registered = x2apic_apic_id_registered,
.irq_delivery_mode = dest_Fixed, .irq_delivery_mode = dest_Fixed,
......
...@@ -351,6 +351,7 @@ static struct apic __refdata apic_x2apic_uv_x = { ...@@ -351,6 +351,7 @@ static struct apic __refdata apic_x2apic_uv_x = {
.name = "UV large system", .name = "UV large system",
.probe = uv_probe, .probe = uv_probe,
.acpi_madt_oem_check = uv_acpi_madt_oem_check, .acpi_madt_oem_check = uv_acpi_madt_oem_check,
.apic_id_valid = default_apic_id_valid,
.apic_id_registered = uv_apic_id_registered, .apic_id_registered = uv_apic_id_registered,
.irq_delivery_mode = dest_Fixed, .irq_delivery_mode = dest_Fixed,
......
...@@ -833,7 +833,7 @@ int __cpuinit native_cpu_up(unsigned int cpu) ...@@ -833,7 +833,7 @@ int __cpuinit native_cpu_up(unsigned int cpu)
if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid || if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid ||
!physid_isset(apicid, phys_cpu_present_map) || !physid_isset(apicid, phys_cpu_present_map) ||
(!x2apic_mode && apicid >= 255)) { !apic->apic_id_valid(apicid)) {
printk(KERN_ERR "%s: bad cpu %d\n", __func__, cpu); printk(KERN_ERR "%s: bad cpu %d\n", __func__, cpu);
return -EINVAL; return -EINVAL;
} }
......
obj-$(CONFIG_ALIX) += alix.o obj-$(CONFIG_ALIX) += alix.o
obj-$(CONFIG_NET5501) += net5501.o
...@@ -6,6 +6,7 @@ ...@@ -6,6 +6,7 @@
* *
* Copyright (C) 2008 Constantin Baranov <const@mimas.ru> * Copyright (C) 2008 Constantin Baranov <const@mimas.ru>
* Copyright (C) 2011 Ed Wildgoose <kernel@wildgooses.com> * Copyright (C) 2011 Ed Wildgoose <kernel@wildgooses.com>
* and Philip Prindeville <philipp@redfish-solutions.com>
* *
* TODO: There are large similarities with leds-net5501.c * TODO: There are large similarities with leds-net5501.c
* by Alessandro Zummo <a.zummo@towertech.it> * by Alessandro Zummo <a.zummo@towertech.it>
...@@ -24,14 +25,47 @@ ...@@ -24,14 +25,47 @@
#include <linux/leds.h> #include <linux/leds.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/dmi.h>
#include <asm/geode.h> #include <asm/geode.h>
#define BIOS_SIGNATURE_TINYBIOS 0xf0000
#define BIOS_SIGNATURE_COREBOOT 0x500
#define BIOS_REGION_SIZE 0x10000
static bool force = 0; static bool force = 0;
module_param(force, bool, 0444); module_param(force, bool, 0444);
/* FIXME: Award bios is not automatically detected as Alix platform */ /* FIXME: Award bios is not automatically detected as Alix platform */
MODULE_PARM_DESC(force, "Force detection as ALIX.2/ALIX.3 platform"); MODULE_PARM_DESC(force, "Force detection as ALIX.2/ALIX.3 platform");
static struct gpio_keys_button alix_gpio_buttons[] = {
{
.code = KEY_RESTART,
.gpio = 24,
.active_low = 1,
.desc = "Reset button",
.type = EV_KEY,
.wakeup = 0,
.debounce_interval = 100,
.can_disable = 0,
}
};
static struct gpio_keys_platform_data alix_buttons_data = {
.buttons = alix_gpio_buttons,
.nbuttons = ARRAY_SIZE(alix_gpio_buttons),
.poll_interval = 20,
};
static struct platform_device alix_buttons_dev = {
.name = "gpio-keys-polled",
.id = 1,
.dev = {
.platform_data = &alix_buttons_data,
}
};
static struct gpio_led alix_leds[] = { static struct gpio_led alix_leds[] = {
{ {
.name = "alix:1", .name = "alix:1",
...@@ -64,17 +98,22 @@ static struct platform_device alix_leds_dev = { ...@@ -64,17 +98,22 @@ static struct platform_device alix_leds_dev = {
.dev.platform_data = &alix_leds_data, .dev.platform_data = &alix_leds_data,
}; };
static struct __initdata platform_device *alix_devs[] = {
&alix_buttons_dev,
&alix_leds_dev,
};
static void __init register_alix(void) static void __init register_alix(void)
{ {
/* Setup LED control through leds-gpio driver */ /* Setup LED control through leds-gpio driver */
platform_device_register(&alix_leds_dev); platform_add_devices(alix_devs, ARRAY_SIZE(alix_devs));
} }
static int __init alix_present(unsigned long bios_phys, static bool __init alix_present(unsigned long bios_phys,
const char *alix_sig, const char *alix_sig,
size_t alix_sig_len) size_t alix_sig_len)
{ {
const size_t bios_len = 0x00010000; const size_t bios_len = BIOS_REGION_SIZE;
const char *bios_virt; const char *bios_virt;
const char *scan_end; const char *scan_end;
const char *p; const char *p;
...@@ -84,7 +123,7 @@ static int __init alix_present(unsigned long bios_phys, ...@@ -84,7 +123,7 @@ static int __init alix_present(unsigned long bios_phys,
printk(KERN_NOTICE "%s: forced to skip BIOS test, " printk(KERN_NOTICE "%s: forced to skip BIOS test, "
"assume system is ALIX.2/ALIX.3\n", "assume system is ALIX.2/ALIX.3\n",
KBUILD_MODNAME); KBUILD_MODNAME);
return 1; return true;
} }
bios_virt = phys_to_virt(bios_phys); bios_virt = phys_to_virt(bios_phys);
...@@ -109,15 +148,33 @@ static int __init alix_present(unsigned long bios_phys, ...@@ -109,15 +148,33 @@ static int __init alix_present(unsigned long bios_phys,
*a = '\0'; *a = '\0';
tail = p + alix_sig_len; tail = p + alix_sig_len;
if ((tail[0] == '2' || tail[0] == '3')) { if ((tail[0] == '2' || tail[0] == '3' || tail[0] == '6')) {
printk(KERN_INFO printk(KERN_INFO
"%s: system is recognized as \"%s\"\n", "%s: system is recognized as \"%s\"\n",
KBUILD_MODNAME, name); KBUILD_MODNAME, name);
return 1; return true;
} }
} }
return 0; return false;
}
static bool __init alix_present_dmi(void)
{
const char *vendor, *product;
vendor = dmi_get_system_info(DMI_SYS_VENDOR);
if (!vendor || strcmp(vendor, "PC Engines"))
return false;
product = dmi_get_system_info(DMI_PRODUCT_NAME);
if (!product || (strcmp(product, "ALIX.2D") && strcmp(product, "ALIX.6")))
return false;
printk(KERN_INFO "%s: system is recognized as \"%s %s\"\n",
KBUILD_MODNAME, vendor, product);
return true;
} }
static int __init alix_init(void) static int __init alix_init(void)
...@@ -128,8 +185,9 @@ static int __init alix_init(void) ...@@ -128,8 +185,9 @@ static int __init alix_init(void)
if (!is_geode()) if (!is_geode())
return 0; return 0;
if (alix_present(0xf0000, tinybios_sig, sizeof(tinybios_sig) - 1) || if (alix_present(BIOS_SIGNATURE_TINYBIOS, tinybios_sig, sizeof(tinybios_sig) - 1) ||
alix_present(0x500, coreboot_sig, sizeof(coreboot_sig) - 1)) alix_present(BIOS_SIGNATURE_COREBOOT, coreboot_sig, sizeof(coreboot_sig) - 1) ||
alix_present_dmi())
register_alix(); register_alix();
return 0; return 0;
......
/* /*
* Soekris board support code * System Specific setup for Soekris net5501
* At the moment this means setup of GPIO control of LEDs and buttons
* on net5501 boards.
*
* *
* Copyright (C) 2008-2009 Tower Technologies * Copyright (C) 2008-2009 Tower Technologies
* Written by Alessandro Zummo <a.zummo@towertech.it> * Written by Alessandro Zummo <a.zummo@towertech.it>
* *
* Copyright (C) 2008 Constantin Baranov <const@mimas.ru>
* Copyright (C) 2011 Ed Wildgoose <kernel@wildgooses.com>
* and Philip Prindeville <philipp@redfish-solutions.com>
*
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 * it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation. * as published by the Free Software Foundation.
...@@ -13,18 +20,50 @@ ...@@ -13,18 +20,50 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/string.h> #include <linux/string.h>
#include <linux/module.h>
#include <linux/leds.h> #include <linux/leds.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/module.h> #include <linux/input.h>
#include <linux/gpio_keys.h>
#include <asm/geode.h> #include <asm/geode.h>
static const struct gpio_led net5501_leds[] = { #define BIOS_REGION_BASE 0xffff0000
#define BIOS_REGION_SIZE 0x00010000
static struct gpio_keys_button net5501_gpio_buttons[] = {
{
.code = KEY_RESTART,
.gpio = 24,
.active_low = 1,
.desc = "Reset button",
.type = EV_KEY,
.wakeup = 0,
.debounce_interval = 100,
.can_disable = 0,
}
};
static struct gpio_keys_platform_data net5501_buttons_data = {
.buttons = net5501_gpio_buttons,
.nbuttons = ARRAY_SIZE(net5501_gpio_buttons),
.poll_interval = 20,
};
static struct platform_device net5501_buttons_dev = {
.name = "gpio-keys-polled",
.id = 1,
.dev = {
.platform_data = &net5501_buttons_data,
}
};
static struct gpio_led net5501_leds[] = {
{ {
.name = "error", .name = "net5501:1",
.gpio = 6, .gpio = 6,
.default_trigger = "default-on", .default_trigger = "default-on",
.active_low = 1,
}, },
}; };
...@@ -39,59 +78,77 @@ static struct platform_device net5501_leds_dev = { ...@@ -39,59 +78,77 @@ static struct platform_device net5501_leds_dev = {
.dev.platform_data = &net5501_leds_data, .dev.platform_data = &net5501_leds_data,
}; };
static void __init init_net5501(void) static struct __initdata platform_device *net5501_devs[] = {
&net5501_buttons_dev,
&net5501_leds_dev,
};
static void __init register_net5501(void)
{ {
platform_device_register(&net5501_leds_dev); /* Setup LED control through leds-gpio driver */
platform_add_devices(net5501_devs, ARRAY_SIZE(net5501_devs));
} }
struct soekris_board { struct net5501_board {
u16 offset; u16 offset;
u16 len;
char *sig; char *sig;
u8 len;
void (*init)(void);
}; };
static struct soekris_board __initdata boards[] = { static struct net5501_board __initdata boards[] = {
{ 0xb7b, "net5501", 7, init_net5501 }, /* net5501 v1.33/1.33c */ { 0xb7b, 7, "net5501" }, /* net5501 v1.33/1.33c */
{ 0xb1f, "net5501", 7, init_net5501 }, /* net5501 v1.32i */ { 0xb1f, 7, "net5501" }, /* net5501 v1.32i */
}; };
static int __init soekris_init(void) static bool __init net5501_present(void)
{ {
int i; int i;
unsigned char *rombase, *bios; unsigned char *rombase, *bios;
bool found = false;
if (!is_geode()) rombase = ioremap(BIOS_REGION_BASE, BIOS_REGION_SIZE - 1);
return 0;
rombase = ioremap(0xffff0000, 0xffff);
if (!rombase) { if (!rombase) {
printk(KERN_INFO "Soekris net5501 LED driver failed to get rombase"); printk(KERN_ERR "%s: failed to get rombase\n", KBUILD_MODNAME);
return 0; return found;
} }
bios = rombase + 0x20; /* null terminated */ bios = rombase + 0x20; /* null terminated */
if (strncmp(bios, "comBIOS", 7)) if (memcmp(bios, "comBIOS", 7))
goto unmap; goto unmap;
for (i = 0; i < ARRAY_SIZE(boards); i++) { for (i = 0; i < ARRAY_SIZE(boards); i++) {
unsigned char *model = rombase + boards[i].offset; unsigned char *model = rombase + boards[i].offset;
if (strncmp(model, boards[i].sig, boards[i].len) == 0) { if (!memcmp(model, boards[i].sig, boards[i].len)) {
printk(KERN_INFO "Soekris %s: %s\n", model, bios); printk(KERN_INFO "%s: system is recognized as \"%s\"\n",
KBUILD_MODNAME, model);
if (boards[i].init) found = true;
boards[i].init();
break; break;
} }
} }
unmap: unmap:
iounmap(rombase); iounmap(rombase);
return found;
}
static int __init net5501_init(void)
{
if (!is_geode())
return 0;
if (!net5501_present())
return 0;
register_net5501();
return 0; return 0;
} }
arch_initcall(soekris_init); module_init(net5501_init);
MODULE_AUTHOR("Philip Prindeville <philipp@redfish-solutions.com>");
MODULE_DESCRIPTION("Soekris net5501 System Setup");
MODULE_LICENSE("GPL"); MODULE_LICENSE("GPL");
obj-$(CONFIG_X86_INTEL_MID) += mrst.o obj-$(CONFIG_X86_INTEL_MID) += mrst.o
obj-$(CONFIG_X86_INTEL_MID) += vrtc.o obj-$(CONFIG_X86_INTEL_MID) += vrtc.o
obj-$(CONFIG_EARLY_PRINTK_INTEL_MID) += early_printk_mrst.o obj-$(CONFIG_EARLY_PRINTK_INTEL_MID) += early_printk_mrst.o
obj-$(CONFIG_X86_MRST) += pmu.o
...@@ -78,15 +78,10 @@ int sfi_mrtc_num; ...@@ -78,15 +78,10 @@ int sfi_mrtc_num;
static void mrst_power_off(void) static void mrst_power_off(void)
{ {
if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT)
intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 1);
} }
static void mrst_reboot(void) static void mrst_reboot(void)
{ {
if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT)
intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 0);
else
intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0); intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
} }
...@@ -200,8 +195,7 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table) ...@@ -200,8 +195,7 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table)
static unsigned long __init mrst_calibrate_tsc(void) static unsigned long __init mrst_calibrate_tsc(void)
{ {
unsigned long flags, fast_calibrate; unsigned long fast_calibrate;
if (__mrst_cpu_chip == MRST_CPU_CHIP_PENWELL) {
u32 lo, hi, ratio, fsb; u32 lo, hi, ratio, fsb;
rdmsr(MSR_IA32_PERF_STATUS, lo, hi); rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
...@@ -223,11 +217,6 @@ static unsigned long __init mrst_calibrate_tsc(void) ...@@ -223,11 +217,6 @@ static unsigned long __init mrst_calibrate_tsc(void)
lapic_timer_frequency = fsb * 1000 / HZ; lapic_timer_frequency = fsb * 1000 / HZ;
/* mark tsc clocksource as reliable */ /* mark tsc clocksource as reliable */
set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE); set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
} else {
local_irq_save(flags);
fast_calibrate = apbt_quick_calibrate();
local_irq_restore(flags);
}
if (fast_calibrate) if (fast_calibrate)
return fast_calibrate; return fast_calibrate;
...@@ -261,16 +250,11 @@ static void __cpuinit mrst_arch_setup(void) ...@@ -261,16 +250,11 @@ static void __cpuinit mrst_arch_setup(void)
{ {
if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27) if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
__mrst_cpu_chip = MRST_CPU_CHIP_PENWELL; __mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
else if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x26)
__mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT;
else { else {
pr_err("Unknown Moorestown CPU (%d:%d), default to Lincroft\n", pr_err("Unknown Intel MID CPU (%d:%d), default to Penwell\n",
boot_cpu_data.x86, boot_cpu_data.x86_model); boot_cpu_data.x86, boot_cpu_data.x86_model);
__mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT; __mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
} }
pr_debug("Moorestown CPU %s identified\n",
(__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT) ?
"Lincroft" : "Penwell");
} }
/* MID systems don't have i8042 controller */ /* MID systems don't have i8042 controller */
...@@ -686,6 +670,11 @@ static void *msic_ocd_platform_data(void *info) ...@@ -686,6 +670,11 @@ static void *msic_ocd_platform_data(void *info)
return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_OCD); return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_OCD);
} }
static void *msic_thermal_platform_data(void *info)
{
return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_THERMAL);
}
static const struct devs_id __initconst device_ids[] = { static const struct devs_id __initconst device_ids[] = {
{"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data}, {"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data},
{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data}, {"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
...@@ -705,6 +694,7 @@ static const struct devs_id __initconst device_ids[] = { ...@@ -705,6 +694,7 @@ static const struct devs_id __initconst device_ids[] = {
{"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data}, {"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data},
{"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data}, {"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data},
{"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data}, {"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data},
{"msic_thermal", SFI_DEV_TYPE_IPC, 1, &msic_thermal_platform_data},
{}, {},
}; };
......
/*
* mrst/pmu.c - driver for MRST Power Management Unit
*
* Copyright (c) 2011, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <linux/cpuidle.h>
#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/seq_file.h>
#include <linux/sfi.h>
#include <asm/intel_scu_ipc.h>
#include "pmu.h"
#define IPCMSG_FW_REVISION 0xF4
struct mrst_device {
u16 pci_dev_num; /* DEBUG only */
u16 lss;
u16 latest_request;
unsigned int pci_state_counts[PCI_D3cold + 1]; /* DEBUG only */
};
/*
* comlete list of MRST PCI devices
*/
static struct mrst_device mrst_devs[] = {
/* 0 */ { 0x0800, LSS_SPI0 }, /* Moorestown SPI Ctrl 0 */
/* 1 */ { 0x0801, LSS_SPI1 }, /* Moorestown SPI Ctrl 1 */
/* 2 */ { 0x0802, LSS_I2C0 }, /* Moorestown I2C 0 */
/* 3 */ { 0x0803, LSS_I2C1 }, /* Moorestown I2C 1 */
/* 4 */ { 0x0804, LSS_I2C2 }, /* Moorestown I2C 2 */
/* 5 */ { 0x0805, LSS_KBD }, /* Moorestown Keyboard Ctrl */
/* 6 */ { 0x0806, LSS_USB_HC }, /* Moorestown USB Ctrl */
/* 7 */ { 0x0807, LSS_SD_HC0 }, /* Moorestown SD Host Ctrl 0 */
/* 8 */ { 0x0808, LSS_SD_HC1 }, /* Moorestown SD Host Ctrl 1 */
/* 9 */ { 0x0809, LSS_NAND }, /* Moorestown NAND Ctrl */
/* 10 */ { 0x080a, LSS_AUDIO }, /* Moorestown Audio Ctrl */
/* 11 */ { 0x080b, LSS_IMAGING }, /* Moorestown ISP */
/* 12 */ { 0x080c, LSS_SECURITY }, /* Moorestown Security Controller */
/* 13 */ { 0x080d, LSS_DISPLAY }, /* Moorestown External Displays */
/* 14 */ { 0x080e, 0 }, /* Moorestown SCU IPC */
/* 15 */ { 0x080f, LSS_GPIO }, /* Moorestown GPIO Controller */
/* 16 */ { 0x0810, 0 }, /* Moorestown Power Management Unit */
/* 17 */ { 0x0811, LSS_USB_OTG }, /* Moorestown OTG Ctrl */
/* 18 */ { 0x0812, LSS_SPI2 }, /* Moorestown SPI Ctrl 2 */
/* 19 */ { 0x0813, 0 }, /* Moorestown SC DMA */
/* 20 */ { 0x0814, LSS_AUDIO_LPE }, /* Moorestown LPE DMA */
/* 21 */ { 0x0815, LSS_AUDIO_SSP }, /* Moorestown SSP0 */
/* 22 */ { 0x084F, LSS_SD_HC2 }, /* Moorestown SD Host Ctrl 2 */
/* 23 */ { 0x4102, 0 }, /* Lincroft */
/* 24 */ { 0x4110, 0 }, /* Lincroft */
};
/* n.b. We ignore PCI-id 0x815 in LSS9 b/c Linux has no driver for it */
static u16 mrst_lss9_pci_ids[] = {0x080a, 0x0814, 0};
static u16 mrst_lss10_pci_ids[] = {0x0800, 0x0801, 0x0802, 0x0803,
0x0804, 0x0805, 0x080f, 0};
/* handle concurrent SMP invokations of pmu_pci_set_power_state() */
static spinlock_t mrst_pmu_power_state_lock;
static unsigned int wake_counters[MRST_NUM_LSS]; /* DEBUG only */
static unsigned int pmu_irq_stats[INT_INVALID + 1]; /* DEBUG only */
static int graphics_is_off;
static int lss_s0i3_enabled;
static bool mrst_pmu_s0i3_enable;
/* debug counters */
static u32 pmu_wait_ready_calls;
static u32 pmu_wait_ready_udelays;
static u32 pmu_wait_ready_udelays_max;
static u32 pmu_wait_done_calls;
static u32 pmu_wait_done_udelays;
static u32 pmu_wait_done_udelays_max;
static u32 pmu_set_power_state_entry;
static u32 pmu_set_power_state_send_cmd;
static struct mrst_device *pci_id_2_mrst_dev(u16 pci_dev_num)
{
int index = 0;
if ((pci_dev_num >= 0x0800) && (pci_dev_num <= 0x815))
index = pci_dev_num - 0x800;
else if (pci_dev_num == 0x084F)
index = 22;
else if (pci_dev_num == 0x4102)
index = 23;
else if (pci_dev_num == 0x4110)
index = 24;
if (pci_dev_num != mrst_devs[index].pci_dev_num) {
WARN_ONCE(1, FW_BUG "Unknown PCI device 0x%04X\n", pci_dev_num);
return 0;
}
return &mrst_devs[index];
}
/**
* mrst_pmu_validate_cstates
* @dev: cpuidle_device
*
* Certain states are not appropriate for governor to pick in some cases.
* This function will be called as cpuidle_device's prepare callback and
* thus tells governor to ignore such states when selecting the next state
* to enter.
*/
#define IDLE_STATE4_IS_C6 4
#define IDLE_STATE5_IS_S0I3 5
int mrst_pmu_invalid_cstates(void)
{
int cpu = smp_processor_id();
/*
* Demote to C4 if the PMU is busy.
* Since LSS changes leave the busy bit clear...
* busy means either the PMU is waiting for an ACK-C6 that
* isn't coming due to an MWAIT that returned immediately;
* or we returned from S0i3 successfully, and the PMU
* is not done sending us interrupts.
*/
if (pmu_read_busy_status())
return 1 << IDLE_STATE4_IS_C6 | 1 << IDLE_STATE5_IS_S0I3;
/*
* Disallow S0i3 if: PMU is not initialized, or CPU1 is active,
* or if device LSS is insufficient, or the GPU is active,
* or if it has been explicitly disabled.
*/
if (!pmu_reg || !cpumask_equal(cpu_online_mask, cpumask_of(cpu)) ||
!lss_s0i3_enabled || !graphics_is_off || !mrst_pmu_s0i3_enable)
return 1 << IDLE_STATE5_IS_S0I3;
else
return 0;
}
/*
* pmu_update_wake_counters(): read PM_WKS, update wake_counters[]
* DEBUG only.
*/
static void pmu_update_wake_counters(void)
{
int lss;
u32 wake_status;
wake_status = pmu_read_wks();
for (lss = 0; lss < MRST_NUM_LSS; ++lss) {
if (wake_status & (1 << lss))
wake_counters[lss]++;
}
}
int mrst_pmu_s0i3_entry(void)
{
int status;
/* Clear any possible error conditions */
pmu_write_ics(0x300);
/* set wake control to current D-states */
pmu_write_wssc(S0I3_SSS_TARGET);
status = mrst_s0i3_entry(PM_S0I3_COMMAND, &pmu_reg->pm_cmd);
pmu_update_wake_counters();
return status;
}
/* poll for maximum of 5ms for busy bit to clear */
static int pmu_wait_ready(void)
{
int udelays;
pmu_wait_ready_calls++;
for (udelays = 0; udelays < 500; ++udelays) {
if (udelays > pmu_wait_ready_udelays_max)
pmu_wait_ready_udelays_max = udelays;
if (pmu_read_busy_status() == 0)
return 0;
udelay(10);
pmu_wait_ready_udelays++;
}
/*
* if this fires, observe
* /sys/kernel/debug/mrst_pmu_wait_ready_calls
* /sys/kernel/debug/mrst_pmu_wait_ready_udelays
*/
WARN_ONCE(1, "SCU not ready for 5ms");
return -EBUSY;
}
/* poll for maximum of 50ms us for busy bit to clear */
static int pmu_wait_done(void)
{
int udelays;
pmu_wait_done_calls++;
for (udelays = 0; udelays < 500; ++udelays) {
if (udelays > pmu_wait_done_udelays_max)
pmu_wait_done_udelays_max = udelays;
if (pmu_read_busy_status() == 0)
return 0;
udelay(100);
pmu_wait_done_udelays++;
}
/*
* if this fires, observe
* /sys/kernel/debug/mrst_pmu_wait_done_calls
* /sys/kernel/debug/mrst_pmu_wait_done_udelays
*/
WARN_ONCE(1, "SCU not done for 50ms");
return -EBUSY;
}
u32 mrst_pmu_msi_is_disabled(void)
{
return pmu_msi_is_disabled();
}
void mrst_pmu_enable_msi(void)
{
pmu_msi_enable();
}
/**
* pmu_irq - pmu driver interrupt handler
* Context: interrupt context
*/
static irqreturn_t pmu_irq(int irq, void *dummy)
{
union pmu_pm_ics pmu_ics;
pmu_ics.value = pmu_read_ics();
if (!pmu_ics.bits.pending)
return IRQ_NONE;
switch (pmu_ics.bits.cause) {
case INT_SPURIOUS:
case INT_CMD_DONE:
case INT_CMD_ERR:
case INT_WAKE_RX:
case INT_SS_ERROR:
case INT_S0IX_MISS:
case INT_NO_ACKC6:
pmu_irq_stats[pmu_ics.bits.cause]++;
break;
default:
pmu_irq_stats[INT_INVALID]++;
}
pmu_write_ics(pmu_ics.value); /* Clear pending interrupt */
return IRQ_HANDLED;
}
/*
* Translate PCI power management to MRST LSS D-states
*/
static int pci_2_mrst_state(int lss, pci_power_t pci_state)
{
switch (pci_state) {
case PCI_D0:
if (SSMSK(D0i1, lss) & D0I1_ACG_SSS_TARGET)
return D0i1;
else
return D0;
case PCI_D1:
return D0i1;
case PCI_D2:
return D0i2;
case PCI_D3hot:
case PCI_D3cold:
return D0i3;
default:
WARN(1, "pci_state %d\n", pci_state);
return 0;
}
}
static int pmu_issue_command(u32 pm_ssc)
{
union pmu_pm_set_cfg_cmd_t command;
if (pmu_read_busy_status()) {
pr_debug("pmu is busy, Operation not permitted\n");
return -1;
}
/*
* enable interrupts in PMU so that interrupts are
* propagated when ioc bit for a particular set
* command is set
*/
pmu_irq_enable();
/* Configure the sub systems for pmu2 */
pmu_write_ssc(pm_ssc);
/*
* Send the set config command for pmu its configured
* for mode CM_IMMEDIATE & hence with No Trigger
*/
command.pmu2_params.d_param.cfg_mode = CM_IMMEDIATE;
command.pmu2_params.d_param.cfg_delay = 0;
command.pmu2_params.d_param.rsvd = 0;
/* construct the command to send SET_CFG to particular PMU */
command.pmu2_params.d_param.cmd = SET_CFG_CMD;
command.pmu2_params.d_param.ioc = 0;
command.pmu2_params.d_param.mode_id = 0;
command.pmu2_params.d_param.sys_state = SYS_STATE_S0I0;
/* write the value of PM_CMD into particular PMU */
pr_debug("pmu command being written %x\n",
command.pmu_pm_set_cfg_cmd_value);
pmu_write_cmd(command.pmu_pm_set_cfg_cmd_value);
return 0;
}
static u16 pmu_min_lss_pci_req(u16 *ids, u16 pci_state)
{
u16 existing_request;
int i;
for (i = 0; ids[i]; ++i) {
struct mrst_device *mrst_dev;
mrst_dev = pci_id_2_mrst_dev(ids[i]);
if (unlikely(!mrst_dev))
continue;
existing_request = mrst_dev->latest_request;
if (existing_request < pci_state)
pci_state = existing_request;
}
return pci_state;
}
/**
* pmu_pci_set_power_state - Callback function is used by all the PCI devices
* for a platform specific device power on/shutdown.
*/
int pmu_pci_set_power_state(struct pci_dev *pdev, pci_power_t pci_state)
{
u32 old_sss, new_sss;
int status = 0;
struct mrst_device *mrst_dev;
pmu_set_power_state_entry++;
BUG_ON(pdev->vendor != PCI_VENDOR_ID_INTEL);
BUG_ON(pci_state < PCI_D0 || pci_state > PCI_D3cold);
mrst_dev = pci_id_2_mrst_dev(pdev->device);
if (unlikely(!mrst_dev))
return -ENODEV;
mrst_dev->pci_state_counts[pci_state]++; /* count invocations */
/* PMU driver calls self as part of PCI initialization, ignore */
if (pdev->device == PCI_DEV_ID_MRST_PMU)
return 0;
BUG_ON(!pmu_reg); /* SW bug if called before initialized */
spin_lock(&mrst_pmu_power_state_lock);
if (pdev->d3_delay) {
dev_dbg(&pdev->dev, "d3_delay %d, should be 0\n",
pdev->d3_delay);
pdev->d3_delay = 0;
}
/*
* If Lincroft graphics, simply remember state
*/
if ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY
&& !((pdev->class & PCI_SUB_CLASS_MASK) >> 8)) {
if (pci_state == PCI_D0)
graphics_is_off = 0;
else
graphics_is_off = 1;
goto ret;
}
if (!mrst_dev->lss)
goto ret; /* device with no LSS */
if (mrst_dev->latest_request == pci_state)
goto ret; /* no change */
mrst_dev->latest_request = pci_state; /* record latest request */
/*
* LSS9 and LSS10 contain multiple PCI devices.
* Use the lowest numbered (highest power) state in the LSS
*/
if (mrst_dev->lss == 9)
pci_state = pmu_min_lss_pci_req(mrst_lss9_pci_ids, pci_state);
else if (mrst_dev->lss == 10)
pci_state = pmu_min_lss_pci_req(mrst_lss10_pci_ids, pci_state);
status = pmu_wait_ready();
if (status)
goto ret;
old_sss = pmu_read_sss();
new_sss = old_sss & ~SSMSK(3, mrst_dev->lss);
new_sss |= SSMSK(pci_2_mrst_state(mrst_dev->lss, pci_state),
mrst_dev->lss);
if (new_sss == old_sss)
goto ret; /* nothing to do */
pmu_set_power_state_send_cmd++;
status = pmu_issue_command(new_sss);
if (unlikely(status != 0)) {
dev_err(&pdev->dev, "Failed to Issue a PM command\n");
goto ret;
}
if (pmu_wait_done())
goto ret;
lss_s0i3_enabled =
((pmu_read_sss() & S0I3_SSS_TARGET) == S0I3_SSS_TARGET);
ret:
spin_unlock(&mrst_pmu_power_state_lock);
return status;
}
#ifdef CONFIG_DEBUG_FS
static char *d0ix_names[] = {"D0", "D0i1", "D0i2", "D0i3"};
static inline const char *d0ix_name(int state)
{
return d0ix_names[(int) state];
}
static int debug_mrst_pmu_show(struct seq_file *s, void *unused)
{
struct pci_dev *pdev = NULL;
u32 cur_pmsss;
int lss;
seq_printf(s, "0x%08X D0I1_ACG_SSS_TARGET\n", D0I1_ACG_SSS_TARGET);
cur_pmsss = pmu_read_sss();
seq_printf(s, "0x%08X S0I3_SSS_TARGET\n", S0I3_SSS_TARGET);
seq_printf(s, "0x%08X Current SSS ", cur_pmsss);
seq_printf(s, lss_s0i3_enabled ? "\n" : "[BLOCKS s0i3]\n");
if (cpumask_equal(cpu_online_mask, cpumask_of(0)))
seq_printf(s, "cpu0 is only cpu online\n");
else
seq_printf(s, "cpu0 is NOT only cpu online [BLOCKS S0i3]\n");
seq_printf(s, "GFX: %s\n", graphics_is_off ? "" : "[BLOCKS s0i3]");
for_each_pci_dev(pdev) {
int pos;
u16 pmcsr;
struct mrst_device *mrst_dev;
int i;
mrst_dev = pci_id_2_mrst_dev(pdev->device);
seq_printf(s, "%s %04x/%04X %-16.16s ",
dev_name(&pdev->dev),
pdev->vendor, pdev->device,
dev_driver_string(&pdev->dev));
if (unlikely (!mrst_dev)) {
seq_printf(s, " UNKNOWN\n");
continue;
}
if (mrst_dev->lss)
seq_printf(s, "LSS %2d %-4s ", mrst_dev->lss,
d0ix_name(((cur_pmsss >>
(mrst_dev->lss * 2)) & 0x3)));
else
seq_printf(s, " ");
/* PCI PM config space setting */
pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
if (pos != 0) {
pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
seq_printf(s, "PCI-%-4s",
pci_power_name(pmcsr & PCI_PM_CTRL_STATE_MASK));
} else {
seq_printf(s, " ");
}
seq_printf(s, " %s ", pci_power_name(mrst_dev->latest_request));
for (i = 0; i <= PCI_D3cold; ++i)
seq_printf(s, "%d ", mrst_dev->pci_state_counts[i]);
if (mrst_dev->lss) {
unsigned int lssmask;
lssmask = SSMSK(D0i3, mrst_dev->lss);
if ((lssmask & S0I3_SSS_TARGET) &&
((lssmask & cur_pmsss) !=
(lssmask & S0I3_SSS_TARGET)))
seq_printf(s , "[BLOCKS s0i3]");
}
seq_printf(s, "\n");
}
seq_printf(s, "Wake Counters:\n");
for (lss = 0; lss < MRST_NUM_LSS; ++lss)
seq_printf(s, "LSS%d %d\n", lss, wake_counters[lss]);
seq_printf(s, "Interrupt Counters:\n");
seq_printf(s,
"INT_SPURIOUS \t%8u\n" "INT_CMD_DONE \t%8u\n"
"INT_CMD_ERR \t%8u\n" "INT_WAKE_RX \t%8u\n"
"INT_SS_ERROR \t%8u\n" "INT_S0IX_MISS\t%8u\n"
"INT_NO_ACKC6 \t%8u\n" "INT_INVALID \t%8u\n",
pmu_irq_stats[INT_SPURIOUS], pmu_irq_stats[INT_CMD_DONE],
pmu_irq_stats[INT_CMD_ERR], pmu_irq_stats[INT_WAKE_RX],
pmu_irq_stats[INT_SS_ERROR], pmu_irq_stats[INT_S0IX_MISS],
pmu_irq_stats[INT_NO_ACKC6], pmu_irq_stats[INT_INVALID]);
seq_printf(s, "mrst_pmu_wait_ready_calls %8d\n",
pmu_wait_ready_calls);
seq_printf(s, "mrst_pmu_wait_ready_udelays %8d\n",
pmu_wait_ready_udelays);
seq_printf(s, "mrst_pmu_wait_ready_udelays_max %8d\n",
pmu_wait_ready_udelays_max);
seq_printf(s, "mrst_pmu_wait_done_calls %8d\n",
pmu_wait_done_calls);
seq_printf(s, "mrst_pmu_wait_done_udelays %8d\n",
pmu_wait_done_udelays);
seq_printf(s, "mrst_pmu_wait_done_udelays_max %8d\n",
pmu_wait_done_udelays_max);
seq_printf(s, "mrst_pmu_set_power_state_entry %8d\n",
pmu_set_power_state_entry);
seq_printf(s, "mrst_pmu_set_power_state_send_cmd %8d\n",
pmu_set_power_state_send_cmd);
seq_printf(s, "SCU busy: %d\n", pmu_read_busy_status());
return 0;
}
static int debug_mrst_pmu_open(struct inode *inode, struct file *file)
{
return single_open(file, debug_mrst_pmu_show, NULL);
}
static const struct file_operations devices_state_operations = {
.open = debug_mrst_pmu_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
#endif /* DEBUG_FS */
/*
* Validate SCU PCI shim PCI vendor capability byte
* against LSS hard-coded in mrst_devs[] above.
* DEBUG only.
*/
static void pmu_scu_firmware_debug(void)
{
struct pci_dev *pdev = NULL;
for_each_pci_dev(pdev) {
struct mrst_device *mrst_dev;
u8 pci_config_lss;
int pos;
mrst_dev = pci_id_2_mrst_dev(pdev->device);
if (unlikely(!mrst_dev)) {
printk(KERN_ERR FW_BUG "pmu: Unknown "
"PCI device 0x%04X\n", pdev->device);
continue;
}
if (mrst_dev->lss == 0)
continue; /* no LSS in our table */
pos = pci_find_capability(pdev, PCI_CAP_ID_VNDR);
if (!pos != 0) {
printk(KERN_ERR FW_BUG "pmu: 0x%04X "
"missing PCI Vendor Capability\n",
pdev->device);
continue;
}
pci_read_config_byte(pdev, pos + 4, &pci_config_lss);
if (!(pci_config_lss & PCI_VENDOR_CAP_LOG_SS_MASK)) {
printk(KERN_ERR FW_BUG "pmu: 0x%04X "
"invalid PCI Vendor Capability 0x%x "
" expected LSS 0x%X\n",
pdev->device, pci_config_lss, mrst_dev->lss);
continue;
}
pci_config_lss &= PCI_VENDOR_CAP_LOG_ID_MASK;
if (mrst_dev->lss == pci_config_lss)
continue;
printk(KERN_ERR FW_BUG "pmu: 0x%04X LSS = %d, expected %d\n",
pdev->device, pci_config_lss, mrst_dev->lss);
}
}
/**
* pmu_probe
*/
static int __devinit pmu_probe(struct pci_dev *pdev,
const struct pci_device_id *pci_id)
{
int ret;
struct mrst_pmu_reg *pmu;
/* Init the device */
ret = pci_enable_device(pdev);
if (ret) {
dev_err(&pdev->dev, "Unable to Enable PCI device\n");
return ret;
}
ret = pci_request_regions(pdev, MRST_PMU_DRV_NAME);
if (ret < 0) {
dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting\n");
goto out_err1;
}
/* Map the memory of PMU reg base */
pmu = pci_iomap(pdev, 0, 0);
if (!pmu) {
dev_err(&pdev->dev, "Unable to map the PMU address space\n");
ret = -ENOMEM;
goto out_err2;
}
#ifdef CONFIG_DEBUG_FS
/* /sys/kernel/debug/mrst_pmu */
(void) debugfs_create_file("mrst_pmu", S_IFREG | S_IRUGO,
NULL, NULL, &devices_state_operations);
#endif
pmu_reg = pmu; /* success */
if (request_irq(pdev->irq, pmu_irq, 0, MRST_PMU_DRV_NAME, NULL)) {
dev_err(&pdev->dev, "Registering isr has failed\n");
ret = -1;
goto out_err3;
}
pmu_scu_firmware_debug();
pmu_write_wkc(S0I3_WAKE_SOURCES); /* Enable S0i3 wakeup sources */
pmu_wait_ready();
pmu_write_ssc(D0I1_ACG_SSS_TARGET); /* Enable Auto-Clock_Gating */
pmu_write_cmd(0x201);
spin_lock_init(&mrst_pmu_power_state_lock);
/* Enable the hardware interrupt */
pmu_irq_enable();
return 0;
out_err3:
free_irq(pdev->irq, NULL);
pci_iounmap(pdev, pmu_reg);
pmu_reg = NULL;
out_err2:
pci_release_region(pdev, 0);
out_err1:
pci_disable_device(pdev);
return ret;
}
static void __devexit pmu_remove(struct pci_dev *pdev)
{
dev_err(&pdev->dev, "Mid PM pmu_remove called\n");
/* Freeing up the irq */
free_irq(pdev->irq, NULL);
pci_iounmap(pdev, pmu_reg);
pmu_reg = NULL;
/* disable the current PCI device */
pci_release_region(pdev, 0);
pci_disable_device(pdev);
}
static DEFINE_PCI_DEVICE_TABLE(pmu_pci_ids) = {
{ PCI_VDEVICE(INTEL, PCI_DEV_ID_MRST_PMU), 0 },
{ }
};
MODULE_DEVICE_TABLE(pci, pmu_pci_ids);
static struct pci_driver driver = {
.name = MRST_PMU_DRV_NAME,
.id_table = pmu_pci_ids,
.probe = pmu_probe,
.remove = __devexit_p(pmu_remove),
};
/**
* pmu_pci_register - register the PMU driver as PCI device
*/
static int __init pmu_pci_register(void)
{
return pci_register_driver(&driver);
}
/* Register and probe via fs_initcall() to preceed device_initcall() */
fs_initcall(pmu_pci_register);
static void __exit mid_pci_cleanup(void)
{
pci_unregister_driver(&driver);
}
static int ia_major;
static int ia_minor;
static int pmu_sfi_parse_oem(struct sfi_table_header *table)
{
struct sfi_table_simple *sb;
sb = (struct sfi_table_simple *)table;
ia_major = (sb->pentry[1] >> 0) & 0xFFFF;
ia_minor = (sb->pentry[1] >> 16) & 0xFFFF;
printk(KERN_INFO "mrst_pmu: IA FW version v%x.%x\n",
ia_major, ia_minor);
return 0;
}
static int __init scu_fw_check(void)
{
int ret;
u32 fw_version;
if (!pmu_reg)
return 0; /* this driver didn't probe-out */
sfi_table_parse("OEMB", NULL, NULL, pmu_sfi_parse_oem);
if (ia_major < 0x6005 || ia_minor < 0x1525) {
WARN(1, "mrst_pmu: IA FW version too old\n");
return -1;
}
ret = intel_scu_ipc_command(IPCMSG_FW_REVISION, 0, NULL, 0,
&fw_version, 1);
if (ret) {
WARN(1, "mrst_pmu: IPC FW version? %d\n", ret);
} else {
int scu_major = (fw_version >> 8) & 0xFF;
int scu_minor = (fw_version >> 0) & 0xFF;
printk(KERN_INFO "mrst_pmu: firmware v%x\n", fw_version);
if ((scu_major >= 0xC0) && (scu_minor >= 0x49)) {
printk(KERN_INFO "mrst_pmu: enabling S0i3\n");
mrst_pmu_s0i3_enable = true;
} else {
WARN(1, "mrst_pmu: S0i3 disabled, old firmware %X.%X",
scu_major, scu_minor);
}
}
return 0;
}
late_initcall(scu_fw_check);
module_exit(mid_pci_cleanup);
/*
* mrst/pmu.h - private definitions for MRST Power Management Unit mrst/pmu.c
*
* Copyright (c) 2011, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef _MRST_PMU_H_
#define _MRST_PMU_H_
#define PCI_DEV_ID_MRST_PMU 0x0810
#define MRST_PMU_DRV_NAME "mrst_pmu"
#define PCI_SUB_CLASS_MASK 0xFF00
#define PCI_VENDOR_CAP_LOG_ID_MASK 0x7F
#define PCI_VENDOR_CAP_LOG_SS_MASK 0x80
#define SUB_SYS_ALL_D0I1 0x01155555
#define S0I3_WAKE_SOURCES 0x00001FFF
#define PM_S0I3_COMMAND \
((0 << 31) | /* Reserved */ \
(0 << 30) | /* Core must be idle */ \
(0xc2 << 22) | /* ACK C6 trigger */ \
(3 << 19) | /* Trigger on DMI message */ \
(3 << 16) | /* Enter S0i3 */ \
(0 << 13) | /* Numeric mode ID (sw) */ \
(3 << 9) | /* Trigger mode */ \
(0 << 8) | /* Do not interrupt */ \
(1 << 0)) /* Set configuration */
#define LSS_DMI 0
#define LSS_SD_HC0 1
#define LSS_SD_HC1 2
#define LSS_NAND 3
#define LSS_IMAGING 4
#define LSS_SECURITY 5
#define LSS_DISPLAY 6
#define LSS_USB_HC 7
#define LSS_USB_OTG 8
#define LSS_AUDIO 9
#define LSS_AUDIO_LPE 9
#define LSS_AUDIO_SSP 9
#define LSS_I2C0 10
#define LSS_I2C1 10
#define LSS_I2C2 10
#define LSS_KBD 10
#define LSS_SPI0 10
#define LSS_SPI1 10
#define LSS_SPI2 10
#define LSS_GPIO 10
#define LSS_SRAM 11 /* used by SCU, do not touch */
#define LSS_SD_HC2 12
/* LSS hardware bits 15,14,13 are hardwired to 0, thus unusable */
#define MRST_NUM_LSS 13
#define MIN(a, b) (((a) < (b)) ? (a) : (b))
#define SSMSK(mask, lss) ((mask) << ((lss) * 2))
#define D0 0
#define D0i1 1
#define D0i2 2
#define D0i3 3
#define S0I3_SSS_TARGET ( \
SSMSK(D0i1, LSS_DMI) | \
SSMSK(D0i3, LSS_SD_HC0) | \
SSMSK(D0i3, LSS_SD_HC1) | \
SSMSK(D0i3, LSS_NAND) | \
SSMSK(D0i3, LSS_SD_HC2) | \
SSMSK(D0i3, LSS_IMAGING) | \
SSMSK(D0i3, LSS_SECURITY) | \
SSMSK(D0i3, LSS_DISPLAY) | \
SSMSK(D0i3, LSS_USB_HC) | \
SSMSK(D0i3, LSS_USB_OTG) | \
SSMSK(D0i3, LSS_AUDIO) | \
SSMSK(D0i1, LSS_I2C0))
/*
* D0i1 on Langwell is Autonomous Clock Gating (ACG).
* Enable ACG on every LSS except camera and audio
*/
#define D0I1_ACG_SSS_TARGET \
(SUB_SYS_ALL_D0I1 & ~SSMSK(D0i1, LSS_IMAGING) & ~SSMSK(D0i1, LSS_AUDIO))
enum cm_mode {
CM_NOP, /* ignore the config mode value */
CM_IMMEDIATE,
CM_DELAY,
CM_TRIGGER,
CM_INVALID
};
enum sys_state {
SYS_STATE_S0I0,
SYS_STATE_S0I1,
SYS_STATE_S0I2,
SYS_STATE_S0I3,
SYS_STATE_S3,
SYS_STATE_S5
};
#define SET_CFG_CMD 1
enum int_status {
INT_SPURIOUS = 0,
INT_CMD_DONE = 1,
INT_CMD_ERR = 2,
INT_WAKE_RX = 3,
INT_SS_ERROR = 4,
INT_S0IX_MISS = 5,
INT_NO_ACKC6 = 6,
INT_INVALID = 7,
};
/* PMU register interface */
static struct mrst_pmu_reg {
u32 pm_sts; /* 0x00 */
u32 pm_cmd; /* 0x04 */
u32 pm_ics; /* 0x08 */
u32 _resv1; /* 0x0C */
u32 pm_wkc[2]; /* 0x10 */
u32 pm_wks[2]; /* 0x18 */
u32 pm_ssc[4]; /* 0x20 */
u32 pm_sss[4]; /* 0x30 */
u32 pm_wssc[4]; /* 0x40 */
u32 pm_c3c4; /* 0x50 */
u32 pm_c5c6; /* 0x54 */
u32 pm_msi_disable; /* 0x58 */
} *pmu_reg;
static inline u32 pmu_read_sts(void) { return readl(&pmu_reg->pm_sts); }
static inline u32 pmu_read_ics(void) { return readl(&pmu_reg->pm_ics); }
static inline u32 pmu_read_wks(void) { return readl(&pmu_reg->pm_wks[0]); }
static inline u32 pmu_read_sss(void) { return readl(&pmu_reg->pm_sss[0]); }
static inline void pmu_write_cmd(u32 arg) { writel(arg, &pmu_reg->pm_cmd); }
static inline void pmu_write_ics(u32 arg) { writel(arg, &pmu_reg->pm_ics); }
static inline void pmu_write_wkc(u32 arg) { writel(arg, &pmu_reg->pm_wkc[0]); }
static inline void pmu_write_ssc(u32 arg) { writel(arg, &pmu_reg->pm_ssc[0]); }
static inline void pmu_write_wssc(u32 arg)
{ writel(arg, &pmu_reg->pm_wssc[0]); }
static inline void pmu_msi_enable(void) { writel(0, &pmu_reg->pm_msi_disable); }
static inline u32 pmu_msi_is_disabled(void)
{ return readl(&pmu_reg->pm_msi_disable); }
union pmu_pm_ics {
struct {
u32 cause:8;
u32 enable:1;
u32 pending:1;
u32 reserved:22;
} bits;
u32 value;
};
static inline void pmu_irq_enable(void)
{
union pmu_pm_ics pmu_ics;
pmu_ics.value = pmu_read_ics();
pmu_ics.bits.enable = 1;
pmu_write_ics(pmu_ics.value);
}
union pmu_pm_status {
struct {
u32 pmu_rev:8;
u32 pmu_busy:1;
u32 mode_id:4;
u32 Reserved:19;
} pmu_status_parts;
u32 pmu_status_value;
};
static inline int pmu_read_busy_status(void)
{
union pmu_pm_status result;
result.pmu_status_value = pmu_read_sts();
return result.pmu_status_parts.pmu_busy;
}
/* pmu set config parameters */
struct cfg_delay_param_t {
u32 cmd:8;
u32 ioc:1;
u32 cfg_mode:4;
u32 mode_id:3;
u32 sys_state:3;
u32 cfg_delay:8;
u32 rsvd:5;
};
struct cfg_trig_param_t {
u32 cmd:8;
u32 ioc:1;
u32 cfg_mode:4;
u32 mode_id:3;
u32 sys_state:3;
u32 cfg_trig_type:3;
u32 cfg_trig_val:8;
u32 cmbi:1;
u32 rsvd1:1;
};
union pmu_pm_set_cfg_cmd_t {
union {
struct cfg_delay_param_t d_param;
struct cfg_trig_param_t t_param;
} pmu2_params;
u32 pmu_pm_set_cfg_cmd_value;
};
#ifdef FUTURE_PATCH
extern int mrst_s0i3_entry(u32 regval, u32 *regaddr);
#else
static inline int mrst_s0i3_entry(u32 regval, u32 *regaddr) { return -1; }
#endif
#endif
...@@ -24,6 +24,65 @@ ...@@ -24,6 +24,65 @@
#define XO15_SCI_DEVICE_NAME "OLPC XO-1.5 SCI" #define XO15_SCI_DEVICE_NAME "OLPC XO-1.5 SCI"
static unsigned long xo15_sci_gpe; static unsigned long xo15_sci_gpe;
static bool lid_wake_on_close;
/*
* The normal ACPI LID wakeup behavior is wake-on-open, but not
* wake-on-close. This is implemented as standard by the XO-1.5 DSDT.
*
* We provide here a sysfs attribute that will additionally enable
* wake-on-close behavior. This is useful (e.g.) when we oportunistically
* suspend with the display running; if the lid is then closed, we want to
* wake up to turn the display off.
*
* This is controlled through a custom method in the XO-1.5 DSDT.
*/
static int set_lid_wake_behavior(bool wake_on_close)
{
struct acpi_object_list arg_list;
union acpi_object arg;
acpi_status status;
arg_list.count = 1;
arg_list.pointer = &arg;
arg.type = ACPI_TYPE_INTEGER;
arg.integer.value = wake_on_close;
status = acpi_evaluate_object(NULL, "\\_SB.PCI0.LID.LIDW", &arg_list, NULL);
if (ACPI_FAILURE(status)) {
pr_warning(PFX "failed to set lid behavior\n");
return 1;
}
lid_wake_on_close = wake_on_close;
return 0;
}
static ssize_t
lid_wake_on_close_show(struct kobject *s, struct kobj_attribute *attr, char *buf)
{
return sprintf(buf, "%u\n", lid_wake_on_close);
}
static ssize_t lid_wake_on_close_store(struct kobject *s,
struct kobj_attribute *attr,
const char *buf, size_t n)
{
unsigned int val;
if (sscanf(buf, "%u", &val) != 1)
return -EINVAL;
set_lid_wake_behavior(!!val);
return n;
}
static struct kobj_attribute lid_wake_on_close_attr =
__ATTR(lid_wake_on_close, 0644,
lid_wake_on_close_show,
lid_wake_on_close_store);
static void battery_status_changed(void) static void battery_status_changed(void)
{ {
...@@ -91,6 +150,7 @@ static int xo15_sci_add(struct acpi_device *device) ...@@ -91,6 +150,7 @@ static int xo15_sci_add(struct acpi_device *device)
{ {
unsigned long long tmp; unsigned long long tmp;
acpi_status status; acpi_status status;
int r;
if (!device) if (!device)
return -EINVAL; return -EINVAL;
...@@ -112,6 +172,10 @@ static int xo15_sci_add(struct acpi_device *device) ...@@ -112,6 +172,10 @@ static int xo15_sci_add(struct acpi_device *device)
dev_info(&device->dev, "Initialized, GPE = 0x%lx\n", xo15_sci_gpe); dev_info(&device->dev, "Initialized, GPE = 0x%lx\n", xo15_sci_gpe);
r = sysfs_create_file(&device->dev.kobj, &lid_wake_on_close_attr.attr);
if (r)
goto err_sysfs;
/* Flush queue, and enable all SCI events */ /* Flush queue, and enable all SCI events */
process_sci_queue(); process_sci_queue();
olpc_ec_mask_write(EC_SCI_SRC_ALL); olpc_ec_mask_write(EC_SCI_SRC_ALL);
...@@ -123,6 +187,11 @@ static int xo15_sci_add(struct acpi_device *device) ...@@ -123,6 +187,11 @@ static int xo15_sci_add(struct acpi_device *device)
device_init_wakeup(&device->dev, true); device_init_wakeup(&device->dev, true);
return 0; return 0;
err_sysfs:
acpi_remove_gpe_handler(NULL, xo15_sci_gpe, xo15_sci_gpe_handler);
cancel_work_sync(&sci_work);
return r;
} }
static int xo15_sci_remove(struct acpi_device *device, int type) static int xo15_sci_remove(struct acpi_device *device, int type)
...@@ -130,6 +199,7 @@ static int xo15_sci_remove(struct acpi_device *device, int type) ...@@ -130,6 +199,7 @@ static int xo15_sci_remove(struct acpi_device *device, int type)
acpi_disable_gpe(NULL, xo15_sci_gpe); acpi_disable_gpe(NULL, xo15_sci_gpe);
acpi_remove_gpe_handler(NULL, xo15_sci_gpe, xo15_sci_gpe_handler); acpi_remove_gpe_handler(NULL, xo15_sci_gpe, xo15_sci_gpe_handler);
cancel_work_sync(&sci_work); cancel_work_sync(&sci_work);
sysfs_remove_file(&device->dev.kobj, &lid_wake_on_close_attr.attr);
return 0; return 0;
} }
......
...@@ -89,16 +89,6 @@ config LEDS_NET48XX ...@@ -89,16 +89,6 @@ config LEDS_NET48XX
This option enables support for the Soekris net4801 and net4826 error This option enables support for the Soekris net4801 and net4826 error
LED. LED.
config LEDS_NET5501
tristate "LED Support for Soekris net5501 series Error LED"
depends on LEDS_TRIGGERS
depends on X86 && GPIO_CS5535
select LEDS_TRIGGER_DEFAULT_ON
default n
help
Add support for the Soekris net5501 board (detection, error led
and GPIO).
config LEDS_FSG config LEDS_FSG
tristate "LED Support for the Freecom FSG-3" tristate "LED Support for the Freecom FSG-3"
depends on LEDS_CLASS depends on LEDS_CLASS
......
...@@ -14,7 +14,6 @@ obj-$(CONFIG_LEDS_MIKROTIK_RB532) += leds-rb532.o ...@@ -14,7 +14,6 @@ obj-$(CONFIG_LEDS_MIKROTIK_RB532) += leds-rb532.o
obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o
obj-$(CONFIG_LEDS_AMS_DELTA) += leds-ams-delta.o obj-$(CONFIG_LEDS_AMS_DELTA) += leds-ams-delta.o
obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
obj-$(CONFIG_LEDS_NET5501) += leds-net5501.o
obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o
obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
......
...@@ -696,33 +696,11 @@ config INTEL_MID_POWER_BUTTON ...@@ -696,33 +696,11 @@ config INTEL_MID_POWER_BUTTON
config INTEL_MFLD_THERMAL config INTEL_MFLD_THERMAL
tristate "Thermal driver for Intel Medfield platform" tristate "Thermal driver for Intel Medfield platform"
depends on INTEL_SCU_IPC && THERMAL depends on MFD_INTEL_MSIC && THERMAL
help help
Say Y here to enable thermal driver support for the Intel Medfield Say Y here to enable thermal driver support for the Intel Medfield
platform. platform.
config RAR_REGISTER
bool "Restricted Access Region Register Driver"
depends on PCI && X86_MRST
default n
---help---
This driver allows other kernel drivers access to the
contents of the restricted access region control registers.
The restricted access region control registers
(rar_registers) are used to pass address and
locking information on restricted access regions
to other drivers that use restricted access regions.
The restricted access regions are regions of memory
on the Intel MID Platform that are not accessible to
the x86 processor, but are accessible to dedicated
processors on board peripheral devices.
The purpose of the restricted access regions is to
protect sensitive data from compromise by unauthorized
programs running on the x86 processor.
config INTEL_IPS config INTEL_IPS
tristate "Intel Intelligent Power Sharing" tristate "Intel Intelligent Power Sharing"
depends on ACPI depends on ACPI
......
...@@ -36,7 +36,6 @@ obj-$(CONFIG_TOSHIBA_BT_RFKILL) += toshiba_bluetooth.o ...@@ -36,7 +36,6 @@ obj-$(CONFIG_TOSHIBA_BT_RFKILL) += toshiba_bluetooth.o
obj-$(CONFIG_INTEL_SCU_IPC) += intel_scu_ipc.o obj-$(CONFIG_INTEL_SCU_IPC) += intel_scu_ipc.o
obj-$(CONFIG_INTEL_SCU_IPC_UTIL) += intel_scu_ipcutil.o obj-$(CONFIG_INTEL_SCU_IPC_UTIL) += intel_scu_ipcutil.o
obj-$(CONFIG_INTEL_MFLD_THERMAL) += intel_mid_thermal.o obj-$(CONFIG_INTEL_MFLD_THERMAL) += intel_mid_thermal.o
obj-$(CONFIG_RAR_REGISTER) += intel_rar_register.o
obj-$(CONFIG_INTEL_IPS) += intel_ips.o obj-$(CONFIG_INTEL_IPS) += intel_ips.o
obj-$(CONFIG_GPIO_INTEL_PMIC) += intel_pmic_gpio.o obj-$(CONFIG_GPIO_INTEL_PMIC) += intel_pmic_gpio.o
obj-$(CONFIG_XO1_RFKILL) += xo1-rfkill.o obj-$(CONFIG_XO1_RFKILL) += xo1-rfkill.o
......
...@@ -23,21 +23,27 @@ ...@@ -23,21 +23,27 @@
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/input.h> #include <linux/input.h>
#include <linux/mfd/intel_msic.h>
#include <asm/intel_scu_ipc.h>
#define DRIVER_NAME "msic_power_btn" #define DRIVER_NAME "msic_power_btn"
#define MSIC_PB_STATUS 0x3f
#define MSIC_PB_LEVEL (1 << 3) /* 1 - release, 0 - press */ #define MSIC_PB_LEVEL (1 << 3) /* 1 - release, 0 - press */
/*
* MSIC document ti_datasheet defines the 1st bit reg 0x21 is used to mask
* power button interrupt
*/
#define MSIC_PWRBTNM (1 << 0)
static irqreturn_t mfld_pb_isr(int irq, void *dev_id) static irqreturn_t mfld_pb_isr(int irq, void *dev_id)
{ {
struct input_dev *input = dev_id; struct input_dev *input = dev_id;
int ret; int ret;
u8 pbstat; u8 pbstat;
ret = intel_scu_ipc_ioread8(MSIC_PB_STATUS, &pbstat); ret = intel_msic_reg_read(INTEL_MSIC_PBSTATUS, &pbstat);
dev_dbg(input->dev.parent, "PB_INT status= %d\n", pbstat);
if (ret < 0) { if (ret < 0) {
dev_err(input->dev.parent, "Read error %d while reading" dev_err(input->dev.parent, "Read error %d while reading"
" MSIC_PB_STATUS\n", ret); " MSIC_PB_STATUS\n", ret);
...@@ -88,6 +94,24 @@ static int __devinit mfld_pb_probe(struct platform_device *pdev) ...@@ -88,6 +94,24 @@ static int __devinit mfld_pb_probe(struct platform_device *pdev)
} }
platform_set_drvdata(pdev, input); platform_set_drvdata(pdev, input);
/*
* SCU firmware might send power button interrupts to IA core before
* kernel boots and doesn't get EOI from IA core. The first bit of
* MSIC reg 0x21 is kept masked, and SCU firmware doesn't send new
* power interrupt to Android kernel. Unmask the bit when probing
* power button in kernel.
* There is a very narrow race between irq handler and power button
* initialization. The race happens rarely. So we needn't worry
* about it.
*/
error = intel_msic_reg_update(INTEL_MSIC_IRQLVL1MSK, 0, MSIC_PWRBTNM);
if (error) {
dev_err(&pdev->dev, "Unable to clear power button interrupt, "
"error: %d\n", error);
goto err_free_irq;
}
return 0; return 0;
err_free_irq: err_free_irq:
......
...@@ -33,18 +33,15 @@ ...@@ -33,18 +33,15 @@
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/pm.h> #include <linux/pm.h>
#include <linux/thermal.h> #include <linux/thermal.h>
#include <linux/mfd/intel_msic.h>
#include <asm/intel_scu_ipc.h>
/* Number of thermal sensors */ /* Number of thermal sensors */
#define MSIC_THERMAL_SENSORS 4 #define MSIC_THERMAL_SENSORS 4
/* ADC1 - thermal registers */ /* ADC1 - thermal registers */
#define MSIC_THERM_ADC1CNTL1 0x1C0
#define MSIC_ADC_ENBL 0x10 #define MSIC_ADC_ENBL 0x10
#define MSIC_ADC_START 0x08 #define MSIC_ADC_START 0x08
#define MSIC_THERM_ADC1CNTL3 0x1C2
#define MSIC_ADCTHERM_ENBL 0x04 #define MSIC_ADCTHERM_ENBL 0x04
#define MSIC_ADCRRDATA_ENBL 0x05 #define MSIC_ADCRRDATA_ENBL 0x05
#define MSIC_CHANL_MASK_VAL 0x0F #define MSIC_CHANL_MASK_VAL 0x0F
...@@ -75,8 +72,8 @@ ...@@ -75,8 +72,8 @@
#define ADC_VAL60C 315 #define ADC_VAL60C 315
/* ADC base addresses */ /* ADC base addresses */
#define ADC_CHNL_START_ADDR 0x1C5 /* increments by 1 */ #define ADC_CHNL_START_ADDR INTEL_MSIC_ADC1ADDR0 /* increments by 1 */
#define ADC_DATA_START_ADDR 0x1D4 /* increments by 2 */ #define ADC_DATA_START_ADDR INTEL_MSIC_ADC1SNS0H /* increments by 2 */
/* MSIC die attributes */ /* MSIC die attributes */
#define MSIC_DIE_ADC_MIN 488 #define MSIC_DIE_ADC_MIN 488
...@@ -189,17 +186,17 @@ static int mid_read_temp(struct thermal_zone_device *tzd, unsigned long *temp) ...@@ -189,17 +186,17 @@ static int mid_read_temp(struct thermal_zone_device *tzd, unsigned long *temp)
addr = td_info->chnl_addr; addr = td_info->chnl_addr;
/* Enable the msic for conversion before reading */ /* Enable the msic for conversion before reading */
ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCRRDATA_ENBL); ret = intel_msic_reg_write(INTEL_MSIC_ADC1CNTL3, MSIC_ADCRRDATA_ENBL);
if (ret) if (ret)
return ret; return ret;
/* Re-toggle the RRDATARD bit (temporary workaround) */ /* Re-toggle the RRDATARD bit (temporary workaround) */
ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCTHERM_ENBL); ret = intel_msic_reg_write(INTEL_MSIC_ADC1CNTL3, MSIC_ADCTHERM_ENBL);
if (ret) if (ret)
return ret; return ret;
/* Read the higher bits of data */ /* Read the higher bits of data */
ret = intel_scu_ipc_ioread8(addr, &data); ret = intel_msic_reg_read(addr, &data);
if (ret) if (ret)
return ret; return ret;
...@@ -207,7 +204,7 @@ static int mid_read_temp(struct thermal_zone_device *tzd, unsigned long *temp) ...@@ -207,7 +204,7 @@ static int mid_read_temp(struct thermal_zone_device *tzd, unsigned long *temp)
adc_val = (data << 2); adc_val = (data << 2);
addr++; addr++;
ret = intel_scu_ipc_ioread8(addr, &data);/* Read lower bits */ ret = intel_msic_reg_read(addr, &data);/* Read lower bits */
if (ret) if (ret)
return ret; return ret;
...@@ -235,7 +232,7 @@ static int configure_adc(int val) ...@@ -235,7 +232,7 @@ static int configure_adc(int val)
int ret; int ret;
uint8_t data; uint8_t data;
ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data); ret = intel_msic_reg_read(INTEL_MSIC_ADC1CNTL1, &data);
if (ret) if (ret)
return ret; return ret;
...@@ -246,7 +243,7 @@ static int configure_adc(int val) ...@@ -246,7 +243,7 @@ static int configure_adc(int val)
/* Just stop the ADC */ /* Just stop the ADC */
data &= (~MSIC_ADC_START); data &= (~MSIC_ADC_START);
} }
return intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL1, data); return intel_msic_reg_write(INTEL_MSIC_ADC1CNTL1, data);
} }
/** /**
...@@ -262,21 +259,21 @@ static int set_up_therm_channel(u16 base_addr) ...@@ -262,21 +259,21 @@ static int set_up_therm_channel(u16 base_addr)
int ret; int ret;
/* Enable all the sensor channels */ /* Enable all the sensor channels */
ret = intel_scu_ipc_iowrite8(base_addr, SKIN_SENSOR0_CODE); ret = intel_msic_reg_write(base_addr, SKIN_SENSOR0_CODE);
if (ret) if (ret)
return ret; return ret;
ret = intel_scu_ipc_iowrite8(base_addr + 1, SKIN_SENSOR1_CODE); ret = intel_msic_reg_write(base_addr + 1, SKIN_SENSOR1_CODE);
if (ret) if (ret)
return ret; return ret;
ret = intel_scu_ipc_iowrite8(base_addr + 2, SYS_SENSOR_CODE); ret = intel_msic_reg_write(base_addr + 2, SYS_SENSOR_CODE);
if (ret) if (ret)
return ret; return ret;
/* Since this is the last channel, set the stop bit /* Since this is the last channel, set the stop bit
* to 1 by ORing the DIE_SENSOR_CODE with 0x10 */ * to 1 by ORing the DIE_SENSOR_CODE with 0x10 */
ret = intel_scu_ipc_iowrite8(base_addr + 3, ret = intel_msic_reg_write(base_addr + 3,
(MSIC_DIE_SENSOR_CODE | 0x10)); (MSIC_DIE_SENSOR_CODE | 0x10));
if (ret) if (ret)
return ret; return ret;
...@@ -295,11 +292,11 @@ static int reset_stopbit(uint16_t addr) ...@@ -295,11 +292,11 @@ static int reset_stopbit(uint16_t addr)
{ {
int ret; int ret;
uint8_t data; uint8_t data;
ret = intel_scu_ipc_ioread8(addr, &data); ret = intel_msic_reg_read(addr, &data);
if (ret) if (ret)
return ret; return ret;
/* Set the stop bit to zero */ /* Set the stop bit to zero */
return intel_scu_ipc_iowrite8(addr, (data & 0xEF)); return intel_msic_reg_write(addr, (data & 0xEF));
} }
/** /**
...@@ -322,7 +319,7 @@ static int find_free_channel(void) ...@@ -322,7 +319,7 @@ static int find_free_channel(void)
uint8_t data; uint8_t data;
/* check whether ADC is enabled */ /* check whether ADC is enabled */
ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data); ret = intel_msic_reg_read(INTEL_MSIC_ADC1CNTL1, &data);
if (ret) if (ret)
return ret; return ret;
...@@ -331,7 +328,7 @@ static int find_free_channel(void) ...@@ -331,7 +328,7 @@ static int find_free_channel(void)
/* ADC is already enabled; Looking for an empty channel */ /* ADC is already enabled; Looking for an empty channel */
for (i = 0; i < ADC_CHANLS_MAX; i++) { for (i = 0; i < ADC_CHANLS_MAX; i++) {
ret = intel_scu_ipc_ioread8(ADC_CHNL_START_ADDR + i, &data); ret = intel_msic_reg_read(ADC_CHNL_START_ADDR + i, &data);
if (ret) if (ret)
return ret; return ret;
...@@ -359,12 +356,14 @@ static int mid_initialize_adc(struct device *dev) ...@@ -359,12 +356,14 @@ static int mid_initialize_adc(struct device *dev)
* Ensure that adctherm is disabled before we * Ensure that adctherm is disabled before we
* initialize the ADC * initialize the ADC
*/ */
ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL3, &data); ret = intel_msic_reg_read(INTEL_MSIC_ADC1CNTL3, &data);
if (ret) if (ret)
return ret; return ret;
if (data & MSIC_ADCTHERM_MASK) data &= ~MSIC_ADCTHERM_MASK;
dev_warn(dev, "ADCTHERM already set"); ret = intel_msic_reg_write(INTEL_MSIC_ADC1CNTL3, data);
if (ret)
return ret;
/* Index of the first channel in which the stop bit is set */ /* Index of the first channel in which the stop bit is set */
channel_index = find_free_channel(); channel_index = find_free_channel();
...@@ -546,7 +545,7 @@ static int mid_thermal_remove(struct platform_device *pdev) ...@@ -546,7 +545,7 @@ static int mid_thermal_remove(struct platform_device *pdev)
return configure_adc(0); return configure_adc(0);
} }
#define DRIVER_NAME "msic_sensor" #define DRIVER_NAME "msic_thermal"
static const struct platform_device_id therm_id_table[] = { static const struct platform_device_id therm_id_table[] = {
{ DRIVER_NAME, 1 }, { DRIVER_NAME, 1 },
......
/*
* rar_register.c - An Intel Restricted Access Region register driver
*
* Copyright(c) 2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
* 02111-1307, USA.
*
* -------------------------------------------------------------------
* 20091204 Mark Allyn <mark.a.allyn@intel.com>
* Ossama Othman <ossama.othman@intel.com>
* Cleanup per feedback from Alan Cox and Arjan Van De Ven
*
* 20090806 Ossama Othman <ossama.othman@intel.com>
* Return zero high address if upper 22 bits is zero.
* Cleaned up checkpatch errors.
* Clarified that driver is dealing with bus addresses.
*
* 20090702 Ossama Othman <ossama.othman@intel.com>
* Removed unnecessary include directives
* Cleaned up spinlocks.
* Cleaned up logging.
* Improved invalid parameter checks.
* Fixed and simplified RAR address retrieval and RAR locking
* code.
*
* 20090626 Mark Allyn <mark.a.allyn@intel.com>
* Initial publish
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/rar_register.h>
/* === Lincroft Message Bus Interface === */
#define LNC_MCR_OFFSET 0xD0 /* Message Control Register */
#define LNC_MDR_OFFSET 0xD4 /* Message Data Register */
/* Message Opcodes */
#define LNC_MESSAGE_READ_OPCODE 0xD0
#define LNC_MESSAGE_WRITE_OPCODE 0xE0
/* Message Write Byte Enables */
#define LNC_MESSAGE_BYTE_WRITE_ENABLES 0xF
/* B-unit Port */
#define LNC_BUNIT_PORT 0x3
/* === Lincroft B-Unit Registers - Programmed by IA32 firmware === */
#define LNC_BRAR0L 0x10
#define LNC_BRAR0H 0x11
#define LNC_BRAR1L 0x12
#define LNC_BRAR1H 0x13
/* Reserved for SeP */
#define LNC_BRAR2L 0x14
#define LNC_BRAR2H 0x15
/* Moorestown supports three restricted access regions. */
#define MRST_NUM_RAR 3
/* RAR Bus Address Range */
struct rar_addr {
dma_addr_t low;
dma_addr_t high;
};
/*
* We create one of these for each RAR
*/
struct client {
int (*callback)(unsigned long data);
unsigned long driver_priv;
bool busy;
};
static DEFINE_MUTEX(rar_mutex);
static DEFINE_MUTEX(lnc_reg_mutex);
/*
* One per RAR device (currently only one device)
*/
struct rar_device {
struct rar_addr rar_addr[MRST_NUM_RAR];
struct pci_dev *rar_dev;
bool registered;
bool allocated;
struct client client[MRST_NUM_RAR];
};
/* Current platforms have only one rar_device for 3 rar regions */
static struct rar_device my_rar_device;
/*
* Abstract out multiple device support. Current platforms only
* have a single RAR device.
*/
/**
* alloc_rar_device - return a new RAR structure
*
* Return a new (but not yet ready) RAR device object
*/
static struct rar_device *alloc_rar_device(void)
{
if (my_rar_device.allocated)
return NULL;
my_rar_device.allocated = 1;
return &my_rar_device;
}
/**
* free_rar_device - free a RAR object
* @rar: the RAR device being freed
*
* Release a RAR object and any attached resources
*/
static void free_rar_device(struct rar_device *rar)
{
pci_dev_put(rar->rar_dev);
rar->allocated = 0;
}
/**
* _rar_to_device - return the device handling this RAR
* @rar: RAR number
* @off: returned offset
*
* Internal helper for looking up RAR devices. This and alloc are the
* two functions that need touching to go to multiple RAR devices.
*/
static struct rar_device *_rar_to_device(int rar, int *off)
{
if (rar >= 0 && rar < MRST_NUM_RAR) {
*off = rar;
return &my_rar_device;
}
return NULL;
}
/**
* rar_to_device - return the device handling this RAR
* @rar: RAR number
* @off: returned offset
*
* Return the device this RAR maps to if one is present, otherwise
* returns NULL. Reports the offset relative to the base of this
* RAR device in off.
*/
static struct rar_device *rar_to_device(int rar, int *off)
{
struct rar_device *rar_dev = _rar_to_device(rar, off);
if (rar_dev == NULL || !rar_dev->registered)
return NULL;
return rar_dev;
}
/**
* rar_to_client - return the client handling this RAR
* @rar: RAR number
*
* Return the client this RAR maps to if a mapping is known, otherwise
* returns NULL.
*/
static struct client *rar_to_client(int rar)
{
int idx;
struct rar_device *r = _rar_to_device(rar, &idx);
if (r != NULL)
return &r->client[idx];
return NULL;
}
/**
* rar_read_addr - retrieve a RAR mapping
* @pdev: PCI device for the RAR
* @offset: offset for message
* @addr: returned address
*
* Reads the address of a given RAR register. Returns 0 on success
* or an error code on failure.
*/
static int rar_read_addr(struct pci_dev *pdev, int offset, dma_addr_t *addr)
{
/*
* ======== The Lincroft Message Bus Interface ========
* Lincroft registers may be obtained via PCI from
* the host bridge using the Lincroft Message Bus
* Interface. That message bus interface is generally
* comprised of two registers: a control register (MCR, 0xDO)
* and a data register (MDR, 0xD4).
*
* The MCR (message control register) format is the following:
* 1. [31:24]: Opcode
* 2. [23:16]: Port
* 3. [15:8]: Register Offset
* 4. [7:4]: Byte Enables (use 0xF to set all of these bits
* to 1)
* 5. [3:0]: reserved
*
* Read (0xD0) and write (0xE0) opcodes are written to the
* control register when reading and writing to Lincroft
* registers, respectively.
*
* We're interested in registers found in the Lincroft
* B-unit. The B-unit port is 0x3.
*
* The six B-unit RAR register offsets we use are listed
* earlier in this file.
*
* Lastly writing to the MCR register requires the "Byte
* enables" bits to be set to 1. This may be achieved by
* writing 0xF at bit 4.
*
* The MDR (message data register) format is the following:
* 1. [31:0]: Read/Write Data
*
* Data being read from this register is only available after
* writing the appropriate control message to the MCR
* register.
*
* Data being written to this register must be written before
* writing the appropriate control message to the MCR
* register.
*/
int result;
u32 addr32;
/* Construct control message */
u32 const message =
(LNC_MESSAGE_READ_OPCODE << 24)
| (LNC_BUNIT_PORT << 16)
| (offset << 8)
| (LNC_MESSAGE_BYTE_WRITE_ENABLES << 4);
dev_dbg(&pdev->dev, "Offset for 'get' LNC MSG is %x\n", offset);
/*
* We synchronize access to the Lincroft MCR and MDR registers
* until BOTH the command is issued through the MCR register
* and the corresponding data is read from the MDR register.
* Otherwise a race condition would exist between accesses to
* both registers.
*/
mutex_lock(&lnc_reg_mutex);
/* Send the control message */
result = pci_write_config_dword(pdev, LNC_MCR_OFFSET, message);
if (!result) {
/* Read back the address as a 32bit value */
result = pci_read_config_dword(pdev, LNC_MDR_OFFSET, &addr32);
*addr = (dma_addr_t)addr32;
}
mutex_unlock(&lnc_reg_mutex);
return result;
}
/**
* rar_set_addr - Set a RAR mapping
* @pdev: PCI device for the RAR
* @offset: offset for message
* @addr: address to set
*
* Sets the address of a given RAR register. Returns 0 on success
* or an error code on failure.
*/
static int rar_set_addr(struct pci_dev *pdev,
int offset,
dma_addr_t addr)
{
/*
* Data being written to this register must be written before
* writing the appropriate control message to the MCR
* register.
* See rar_get_addrs() for a description of the
* message bus interface being used here.
*/
int result;
/* Construct control message */
u32 const message = (LNC_MESSAGE_WRITE_OPCODE << 24)
| (LNC_BUNIT_PORT << 16)
| (offset << 8)
| (LNC_MESSAGE_BYTE_WRITE_ENABLES << 4);
/*
* We synchronize access to the Lincroft MCR and MDR registers
* until BOTH the command is issued through the MCR register
* and the corresponding data is read from the MDR register.
* Otherwise a race condition would exist between accesses to
* both registers.
*/
mutex_lock(&lnc_reg_mutex);
/* Send the control message */
result = pci_write_config_dword(pdev, LNC_MDR_OFFSET, addr);
if (!result)
/* And address */
result = pci_write_config_dword(pdev, LNC_MCR_OFFSET, message);
mutex_unlock(&lnc_reg_mutex);
return result;
}
/*
* rar_init_params - Initialize RAR parameters
* @rar: RAR device to initialise
*
* Initialize RAR parameters, such as bus addresses, etc. Returns 0
* on success, or an error code on failure.
*/
static int init_rar_params(struct rar_device *rar)
{
struct pci_dev *pdev = rar->rar_dev;
unsigned int i;
int result = 0;
int offset = 0x10; /* RAR 0 to 2 in order low/high/low/high/... */
/* Retrieve RAR start and end bus addresses.
* Access the RAR registers through the Lincroft Message Bus
* Interface on PCI device: 00:00.0 Host bridge.
*/
for (i = 0; i < MRST_NUM_RAR; ++i) {
struct rar_addr *addr = &rar->rar_addr[i];
result = rar_read_addr(pdev, offset++, &addr->low);
if (result != 0)
return result;
result = rar_read_addr(pdev, offset++, &addr->high);
if (result != 0)
return result;
/*
* Only the upper 22 bits of the RAR addresses are
* stored in their corresponding RAR registers so we
* must set the lower 10 bits accordingly.
* The low address has its lower 10 bits cleared, and
* the high address has all its lower 10 bits set,
* e.g.:
* low = 0x2ffffc00
*/
addr->low &= (dma_addr_t)0xfffffc00u;
/*
* Set bits 9:0 on uppser address if bits 31:10 are non
* zero; otherwize clear all bits
*/
if ((addr->high & 0xfffffc00u) == 0)
addr->high = 0;
else
addr->high |= 0x3ffu;
}
/* Done accessing the device. */
if (result == 0) {
for (i = 0; i != MRST_NUM_RAR; ++i) {
/*
* "BRAR" refers to the RAR registers in the
* Lincroft B-unit.
*/
dev_info(&pdev->dev, "BRAR[%u] bus address range = "
"[%lx, %lx]\n", i,
(unsigned long)rar->rar_addr[i].low,
(unsigned long)rar->rar_addr[i].high);
}
}
return result;
}
/**
* rar_get_address - get the bus address in a RAR
* @start: return value of start address of block
* @end: return value of end address of block
*
* The rar_get_address function is used by other device drivers
* to obtain RAR address information on a RAR. It takes three
* parameters:
*
* The function returns a 0 upon success or an error if there is no RAR
* facility on this system.
*/
int rar_get_address(int rar_index, dma_addr_t *start, dma_addr_t *end)
{
int idx;
struct rar_device *rar = rar_to_device(rar_index, &idx);
if (rar == NULL) {
WARN_ON(1);
return -ENODEV;
}
*start = rar->rar_addr[idx].low;
*end = rar->rar_addr[idx].high;
return 0;
}
EXPORT_SYMBOL(rar_get_address);
/**
* rar_lock - lock a RAR register
* @rar_index: RAR to lock (0-2)
*
* The rar_lock function is ued by other device drivers to lock an RAR.
* once a RAR is locked, it stays locked until the next system reboot.
*
* The function returns a 0 upon success or an error if there is no RAR
* facility on this system, or the locking fails
*/
int rar_lock(int rar_index)
{
struct rar_device *rar;
int result;
int idx;
dma_addr_t low, high;
rar = rar_to_device(rar_index, &idx);
if (rar == NULL) {
WARN_ON(1);
return -EINVAL;
}
low = rar->rar_addr[idx].low & 0xfffffc00u;
high = rar->rar_addr[idx].high & 0xfffffc00u;
/*
* Only allow I/O from the graphics and Langwell;
* not from the x86 processor
*/
if (rar_index == RAR_TYPE_VIDEO) {
low |= 0x00000009;
high |= 0x00000015;
} else if (rar_index == RAR_TYPE_AUDIO) {
/* Only allow I/O from Langwell; nothing from x86 */
low |= 0x00000008;
high |= 0x00000018;
} else
/* Read-only from all agents */
high |= 0x00000018;
/*
* Now program the register using the Lincroft message
* bus interface.
*/
result = rar_set_addr(rar->rar_dev,
2 * idx, low);
if (result == 0)
result = rar_set_addr(rar->rar_dev,
2 * idx + 1, high);
return result;
}
EXPORT_SYMBOL(rar_lock);
/**
* register_rar - register a RAR handler
* @num: RAR we wish to register for
* @callback: function to call when RAR support is available
* @data: data to pass to this function
*
* The register_rar function is to used by other device drivers
* to ensure that this driver is ready. As we cannot be sure of
* the compile/execute order of drivers in the kernel, it is
* best to give this driver a callback function to call when
* it is ready to give out addresses. The callback function
* would have those steps that continue the initialization of
* a driver that do require a valid RAR address. One of those
* steps would be to call rar_get_address()
*
* This function return 0 on success or an error code on failure.
*/
int register_rar(int num, int (*callback)(unsigned long data),
unsigned long data)
{
/* For now we hardcode a single RAR device */
struct rar_device *rar;
struct client *c;
int idx;
int retval = 0;
mutex_lock(&rar_mutex);
/* Do we have a client mapping for this RAR number ? */
c = rar_to_client(num);
if (c == NULL) {
retval = -ERANGE;
goto done;
}
/* Is it claimed ? */
if (c->busy) {
retval = -EBUSY;
goto done;
}
c->busy = 1;
/* See if we have a handler for this RAR yet, if we do then fire it */
rar = rar_to_device(num, &idx);
if (rar) {
/*
* if the driver already registered, then we can simply
* call the callback right now
*/
(*callback)(data);
goto done;
}
/* Arrange to be called back when the hardware is found */
c->callback = callback;
c->driver_priv = data;
done:
mutex_unlock(&rar_mutex);
return retval;
}
EXPORT_SYMBOL(register_rar);
/**
* unregister_rar - release a RAR allocation
* @num: RAR number
*
* Releases a RAR allocation, or pending allocation. If a callback is
* pending then this function will either complete before the unregister
* returns or not at all.
*/
void unregister_rar(int num)
{
struct client *c;
mutex_lock(&rar_mutex);
c = rar_to_client(num);
if (c == NULL || !c->busy)
WARN_ON(1);
else
c->busy = 0;
mutex_unlock(&rar_mutex);
}
EXPORT_SYMBOL(unregister_rar);
/**
* rar_callback - Process callbacks
* @rar: new RAR device
*
* Process the callbacks for a newly found RAR device.
*/
static void rar_callback(struct rar_device *rar)
{
struct client *c = &rar->client[0];
int i;
mutex_lock(&rar_mutex);
rar->registered = 1; /* Ensure no more callbacks queue */
for (i = 0; i < MRST_NUM_RAR; i++) {
if (c->callback && c->busy) {
c->callback(c->driver_priv);
c->callback = NULL;
}
c++;
}
mutex_unlock(&rar_mutex);
}
/**
* rar_probe - PCI probe callback
* @dev: PCI device
* @id: matching entry in the match table
*
* A RAR device has been discovered. Initialise it and if successful
* process any pending callbacks that can now be completed.
*/
static int rar_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
int error;
struct rar_device *rar;
dev_dbg(&dev->dev, "PCI probe starting\n");
rar = alloc_rar_device();
if (rar == NULL)
return -EBUSY;
/* Enable the device */
error = pci_enable_device(dev);
if (error) {
dev_err(&dev->dev,
"Error enabling RAR register PCI device\n");
goto end_function;
}
/* Fill in the rar_device structure */
rar->rar_dev = pci_dev_get(dev);
pci_set_drvdata(dev, rar);
/*
* Initialize the RAR parameters, which have to be retrieved
* via the message bus interface.
*/
error = init_rar_params(rar);
if (error) {
pci_disable_device(dev);
dev_err(&dev->dev, "Error retrieving RAR addresses\n");
goto end_function;
}
/* now call anyone who has registered (using callbacks) */
rar_callback(rar);
return 0;
end_function:
free_rar_device(rar);
return error;
}
static DEFINE_PCI_DEVICE_TABLE(rar_pci_id_tbl) = {
{ PCI_VDEVICE(INTEL, 0x4110) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, rar_pci_id_tbl);
/* field for registering driver to PCI device */
static struct pci_driver rar_pci_driver = {
.name = "rar_register_driver",
.id_table = rar_pci_id_tbl,
.probe = rar_probe,
/* Cannot be unplugged - no remove */
};
static int __init rar_init_handler(void)
{
return pci_register_driver(&rar_pci_driver);
}
static void __exit rar_exit_handler(void)
{
pci_unregister_driver(&rar_pci_driver);
}
module_init(rar_init_handler);
module_exit(rar_exit_handler);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Intel Restricted Access Region Register Driver");
...@@ -159,7 +159,7 @@ static inline int busy_loop(void) /* Wait till scu status is busy */ ...@@ -159,7 +159,7 @@ static inline int busy_loop(void) /* Wait till scu status is busy */
/* Read/Write power control(PMIC in Langwell, MSIC in PenWell) registers */ /* Read/Write power control(PMIC in Langwell, MSIC in PenWell) registers */
static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id) static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
{ {
int i, nc, bytes, d; int nc;
u32 offset = 0; u32 offset = 0;
int err; int err;
u8 cbuf[IPC_WWBUF_SIZE] = { }; u8 cbuf[IPC_WWBUF_SIZE] = { };
...@@ -174,21 +174,6 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id) ...@@ -174,21 +174,6 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
return -ENODEV; return -ENODEV;
} }
if (platform != MRST_CPU_CHIP_PENWELL) {
bytes = 0;
d = 0;
for (i = 0; i < count; i++) {
cbuf[bytes++] = addr[i];
cbuf[bytes++] = addr[i] >> 8;
if (id != IPC_CMD_PCNTRL_R)
cbuf[bytes++] = data[d++];
if (id == IPC_CMD_PCNTRL_M)
cbuf[bytes++] = data[d++];
}
for (i = 0; i < bytes; i += 4)
ipc_data_writel(wbuf[i/4], i);
ipc_command(bytes << 16 | id << 12 | 0 << 8 | op);
} else {
for (nc = 0; nc < count; nc++, offset += 2) { for (nc = 0; nc < count; nc++, offset += 2) {
cbuf[offset] = addr[nc]; cbuf[offset] = addr[nc];
cbuf[offset + 1] = addr[nc] >> 8; cbuf[offset + 1] = addr[nc] >> 8;
...@@ -210,20 +195,14 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id) ...@@ -210,20 +195,14 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id)
ipc_data_writel(wbuf[0], 0); /* Write wbuff */ ipc_data_writel(wbuf[0], 0); /* Write wbuff */
ipc_command(4 << 16 | id << 12 | 0 << 8 | op); ipc_command(4 << 16 | id << 12 | 0 << 8 | op);
} }
}
err = busy_loop(); err = busy_loop();
if (id == IPC_CMD_PCNTRL_R) { /* Read rbuf */ if (id == IPC_CMD_PCNTRL_R) { /* Read rbuf */
/* Workaround: values are read as 0 without memcpy_fromio */ /* Workaround: values are read as 0 without memcpy_fromio */
memcpy_fromio(cbuf, ipcdev.ipc_base + 0x90, 16); memcpy_fromio(cbuf, ipcdev.ipc_base + 0x90, 16);
if (platform != MRST_CPU_CHIP_PENWELL) {
for (nc = 0, offset = 2; nc < count; nc++, offset += 3)
data[nc] = ipc_data_readb(offset);
} else {
for (nc = 0; nc < count; nc++) for (nc = 0; nc < count; nc++)
data[nc] = ipc_data_readb(nc); data[nc] = ipc_data_readb(nc);
} }
}
mutex_unlock(&ipclock); mutex_unlock(&ipclock);
return err; return err;
} }
...@@ -503,148 +482,6 @@ int intel_scu_ipc_i2c_cntrl(u32 addr, u32 *data) ...@@ -503,148 +482,6 @@ int intel_scu_ipc_i2c_cntrl(u32 addr, u32 *data)
} }
EXPORT_SYMBOL(intel_scu_ipc_i2c_cntrl); EXPORT_SYMBOL(intel_scu_ipc_i2c_cntrl);
#define IPC_FW_LOAD_ADDR 0xFFFC0000 /* Storage location for FW image */
#define IPC_FW_UPDATE_MBOX_ADDR 0xFFFFDFF4 /* Mailbox between ipc and scu */
#define IPC_MAX_FW_SIZE 262144 /* 256K storage size for loading the FW image */
#define IPC_FW_MIP_HEADER_SIZE 2048 /* Firmware MIP header size */
/* IPC inform SCU to get ready for update process */
#define IPC_CMD_FW_UPDATE_READY 0x10FE
/* IPC inform SCU to go for update process */
#define IPC_CMD_FW_UPDATE_GO 0x20FE
/* Status code for fw update */
#define IPC_FW_UPDATE_SUCCESS 0x444f4e45 /* Status code 'DONE' */
#define IPC_FW_UPDATE_BADN 0x4241444E /* Status code 'BADN' */
#define IPC_FW_TXHIGH 0x54784849 /* Status code 'IPC_FW_TXHIGH' */
#define IPC_FW_TXLOW 0x54784c4f /* Status code 'IPC_FW_TXLOW' */
struct fw_update_mailbox {
u32 status;
u32 scu_flag;
u32 driver_flag;
};
/**
* intel_scu_ipc_fw_update - Firmware update utility
* @buffer: firmware buffer
* @length: size of firmware buffer
*
* This function provides an interface to load the firmware into
* the SCU. Returns 0 on success or -1 on failure
*/
int intel_scu_ipc_fw_update(u8 *buffer, u32 length)
{
void __iomem *fw_update_base;
struct fw_update_mailbox __iomem *mailbox = NULL;
int retry_cnt = 0;
u32 status;
mutex_lock(&ipclock);
fw_update_base = ioremap_nocache(IPC_FW_LOAD_ADDR, (128*1024));
if (fw_update_base == NULL) {
mutex_unlock(&ipclock);
return -ENOMEM;
}
mailbox = ioremap_nocache(IPC_FW_UPDATE_MBOX_ADDR,
sizeof(struct fw_update_mailbox));
if (mailbox == NULL) {
iounmap(fw_update_base);
mutex_unlock(&ipclock);
return -ENOMEM;
}
ipc_command(IPC_CMD_FW_UPDATE_READY);
/* Intitialize mailbox */
writel(0, &mailbox->status);
writel(0, &mailbox->scu_flag);
writel(0, &mailbox->driver_flag);
/* Driver copies the 2KB MIP header to SRAM at 0xFFFC0000*/
memcpy_toio(fw_update_base, buffer, 0x800);
/* Driver sends "FW Update" IPC command (CMD_ID 0xFE; MSG_ID 0x02).
* Upon receiving this command, SCU will write the 2K MIP header
* from 0xFFFC0000 into NAND.
* SCU will write a status code into the Mailbox, and then set scu_flag.
*/
ipc_command(IPC_CMD_FW_UPDATE_GO);
/*Driver stalls until scu_flag is set */
while (readl(&mailbox->scu_flag) != 1) {
rmb();
mdelay(1);
}
/* Driver checks Mailbox status.
* If the status is 'BADN', then abort (bad NAND).
* If the status is 'IPC_FW_TXLOW', then continue.
*/
while (readl(&mailbox->status) != IPC_FW_TXLOW) {
rmb();
mdelay(10);
}
mdelay(10);
update_retry:
if (retry_cnt > 5)
goto update_end;
if (readl(&mailbox->status) != IPC_FW_TXLOW)
goto update_end;
buffer = buffer + 0x800;
memcpy_toio(fw_update_base, buffer, 0x20000);
writel(1, &mailbox->driver_flag);
while (readl(&mailbox->scu_flag) == 1) {
rmb();
mdelay(1);
}
/* check for 'BADN' */
if (readl(&mailbox->status) == IPC_FW_UPDATE_BADN)
goto update_end;
while (readl(&mailbox->status) != IPC_FW_TXHIGH) {
rmb();
mdelay(10);
}
mdelay(10);
if (readl(&mailbox->status) != IPC_FW_TXHIGH)
goto update_end;
buffer = buffer + 0x20000;
memcpy_toio(fw_update_base, buffer, 0x20000);
writel(0, &mailbox->driver_flag);
while (mailbox->scu_flag == 0) {
rmb();
mdelay(1);
}
/* check for 'BADN' */
if (readl(&mailbox->status) == IPC_FW_UPDATE_BADN)
goto update_end;
if (readl(&mailbox->status) == IPC_FW_TXLOW) {
++retry_cnt;
goto update_retry;
}
update_end:
status = readl(&mailbox->status);
iounmap(fw_update_base);
iounmap(mailbox);
mutex_unlock(&ipclock);
if (status == IPC_FW_UPDATE_SUCCESS)
return 0;
return -EIO;
}
EXPORT_SYMBOL(intel_scu_ipc_fw_update);
/* /*
* Interrupt handler gets called when ioc bit of IPC_COMMAND_REG set to 1 * Interrupt handler gets called when ioc bit of IPC_COMMAND_REG set to 1
* When ioc bit is set to 1, caller api must wait for interrupt handler called * When ioc bit is set to 1, caller api must wait for interrupt handler called
...@@ -727,7 +564,6 @@ static void ipc_remove(struct pci_dev *pdev) ...@@ -727,7 +564,6 @@ static void ipc_remove(struct pci_dev *pdev)
} }
static DEFINE_PCI_DEVICE_TABLE(pci_ids) = { static DEFINE_PCI_DEVICE_TABLE(pci_ids) = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080e)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x082a)}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x082a)},
{ 0,} { 0,}
}; };
......
...@@ -26,13 +26,10 @@ ...@@ -26,13 +26,10 @@
static int major; static int major;
#define MAX_FW_SIZE 264192
/* ioctl commnds */ /* ioctl commnds */
#define INTE_SCU_IPC_REGISTER_READ 0 #define INTE_SCU_IPC_REGISTER_READ 0
#define INTE_SCU_IPC_REGISTER_WRITE 1 #define INTE_SCU_IPC_REGISTER_WRITE 1
#define INTE_SCU_IPC_REGISTER_UPDATE 2 #define INTE_SCU_IPC_REGISTER_UPDATE 2
#define INTE_SCU_IPC_FW_UPDATE 0xA2
struct scu_ipc_data { struct scu_ipc_data {
u32 count; /* No. of registers */ u32 count; /* No. of registers */
...@@ -88,18 +85,6 @@ static long scu_ipc_ioctl(struct file *fp, unsigned int cmd, ...@@ -88,18 +85,6 @@ static long scu_ipc_ioctl(struct file *fp, unsigned int cmd,
if (!capable(CAP_SYS_RAWIO)) if (!capable(CAP_SYS_RAWIO))
return -EPERM; return -EPERM;
if (cmd == INTE_SCU_IPC_FW_UPDATE) {
u8 *fwbuf = kmalloc(MAX_FW_SIZE, GFP_KERNEL);
if (fwbuf == NULL)
return -ENOMEM;
if (copy_from_user(fwbuf, (u8 *)arg, MAX_FW_SIZE)) {
kfree(fwbuf);
return -EFAULT;
}
ret = intel_scu_ipc_fw_update(fwbuf, MAX_FW_SIZE);
kfree(fwbuf);
return ret;
} else {
if (copy_from_user(&data, argp, sizeof(struct scu_ipc_data))) if (copy_from_user(&data, argp, sizeof(struct scu_ipc_data)))
return -EFAULT; return -EFAULT;
ret = scu_reg_access(cmd, &data); ret = scu_reg_access(cmd, &data);
...@@ -108,7 +93,6 @@ static long scu_ipc_ioctl(struct file *fp, unsigned int cmd, ...@@ -108,7 +93,6 @@ static long scu_ipc_ioctl(struct file *fp, unsigned int cmd,
if (copy_to_user(argp, &data, sizeof(struct scu_ipc_data))) if (copy_to_user(argp, &data, sizeof(struct scu_ipc_data)))
return -EFAULT; return -EFAULT;
return 0; return 0;
}
} }
static const struct file_operations scu_ipc_fops = { static const struct file_operations scu_ipc_fops = {
......
/*
* Copyright (C) 2010 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General
* Public License as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be
* useful, but WITHOUT ANY WARRANTY; without even the implied
* warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
* You should have received a copy of the GNU General Public
* License along with this program; if not, write to the Free
* Software Foundation, Inc., 59 Temple Place - Suite 330,
* Boston, MA 02111-1307, USA.
* The full GNU General Public License is included in this
* distribution in the file called COPYING.
*/
#ifndef _RAR_REGISTER_H
#define _RAR_REGISTER_H
#include <linux/types.h>
/* following are used both in drivers as well as user space apps */
#define RAR_TYPE_VIDEO 0
#define RAR_TYPE_AUDIO 1
#define RAR_TYPE_IMAGE 2
#define RAR_TYPE_DATA 3
#ifdef __KERNEL__
struct rar_device;
#if defined(CONFIG_RAR_REGISTER)
int register_rar(int num,
int (*callback)(unsigned long data), unsigned long data);
void unregister_rar(int num);
int rar_get_address(int rar_index, dma_addr_t *start, dma_addr_t *end);
int rar_lock(int rar_index);
#else
extern void unregister_rar(int num) { }
extern int rar_lock(int rar_index) { return -EIO; }
extern inline int register_rar(int num,
int (*callback)(unsigned long data), unsigned long data)
{
return -ENODEV;
}
extern int rar_get_address(int rar_index, dma_addr_t *start, dma_addr_t *end)
{
return -ENODEV;
}
#endif /* RAR_REGISTER */
#endif /* __KERNEL__ */
#endif /* _RAR_REGISTER_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment