Commit 240a12d5 authored by Philipp Zabel's avatar Philipp Zabel Committed by David S. Miller

net: Micrel KSZ8864RMN 4-port managed switch support

This patch adds support for the Micrel KSZ8864RMN switch to the spi_ks8995
driver. The KSZ8864RMN switch has a wider 256-byte register space.
Signed-off-by: default avatarPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent a5e7ac5c
/*
* SPI driver for Micrel/Kendin KS8995M ethernet switch
* SPI driver for Micrel/Kendin KS8995M and KSZ8864RMN ethernet switches
*
* Copyright (C) 2008 Gabor Juhos <juhosg at openwrt.org>
*
......@@ -70,7 +70,10 @@
#define KS8995_REG_IAD1 0x76 /* Indirect Access Data 1 */
#define KS8995_REG_IAD0 0x77 /* Indirect Access Data 0 */
#define KSZ8864_REG_ID1 0xfe /* Chip ID in bit 7 */
#define KS8995_REGS_SIZE 0x80
#define KSZ8864_REGS_SIZE 0x100
#define ID1_CHIPID_M 0xf
#define ID1_CHIPID_S 4
......@@ -94,6 +97,7 @@ struct ks8995_switch {
struct spi_device *spi;
struct mutex lock;
struct ks8995_pdata *pdata;
struct bin_attribute regs_attr;
};
static inline u8 get_chip_id(u8 val)
......@@ -216,11 +220,11 @@ static ssize_t ks8995_registers_read(struct file *filp, struct kobject *kobj,
dev = container_of(kobj, struct device, kobj);
ks8995 = dev_get_drvdata(dev);
if (unlikely(off > KS8995_REGS_SIZE))
if (unlikely(off > ks8995->regs_attr.size))
return 0;
if ((off + count) > KS8995_REGS_SIZE)
count = KS8995_REGS_SIZE - off;
if ((off + count) > ks8995->regs_attr.size)
count = ks8995->regs_attr.size - off;
if (unlikely(!count))
return count;
......@@ -238,11 +242,11 @@ static ssize_t ks8995_registers_write(struct file *filp, struct kobject *kobj,
dev = container_of(kobj, struct device, kobj);
ks8995 = dev_get_drvdata(dev);
if (unlikely(off >= KS8995_REGS_SIZE))
if (unlikely(off >= ks8995->regs_attr.size))
return -EFBIG;
if ((off + count) > KS8995_REGS_SIZE)
count = KS8995_REGS_SIZE - off;
if ((off + count) > ks8995->regs_attr.size)
count = ks8995->regs_attr.size - off;
if (unlikely(!count))
return count;
......@@ -251,7 +255,7 @@ static ssize_t ks8995_registers_write(struct file *filp, struct kobject *kobj,
}
static struct bin_attribute ks8995_registers_attr = {
static const struct bin_attribute ks8995_registers_attr = {
.attr = {
.name = "registers",
.mode = S_IRUSR | S_IWUSR,
......@@ -306,20 +310,44 @@ static int ks8995_probe(struct spi_device *spi)
goto err_drvdata;
}
memcpy(&ks->regs_attr, &ks8995_registers_attr, sizeof(ks->regs_attr));
if (get_chip_id(ids[1]) != CHIPID_M) {
u8 val;
/* Check if this is a KSZ8864RMN */
err = ks8995_read(ks, &val, KSZ8864_REG_ID1, sizeof(val));
if (err < 0) {
dev_err(&spi->dev,
"unable to read chip id register, err=%d\n",
err);
goto err_drvdata;
}
if ((val & 0x80) == 0) {
dev_err(&spi->dev, "unknown chip:%02x,0\n", ids[1]);
goto err_drvdata;
}
ks->regs_attr.size = KSZ8864_REGS_SIZE;
}
err = ks8995_reset(ks);
if (err)
goto err_drvdata;
err = sysfs_create_bin_file(&spi->dev.kobj, &ks8995_registers_attr);
err = sysfs_create_bin_file(&spi->dev.kobj, &ks->regs_attr);
if (err) {
dev_err(&spi->dev, "unable to create sysfs file, err=%d\n",
err);
goto err_drvdata;
}
dev_info(&spi->dev, "KS89%02X device found, Chip ID:%01x, "
"Revision:%01x\n", ids[0],
if (get_chip_id(ids[1]) == CHIPID_M) {
dev_info(&spi->dev,
"KS8995 device found, Chip ID:%x, Revision:%x\n",
get_chip_id(ids[1]), get_chip_rev(ids[1]));
} else {
dev_info(&spi->dev, "KSZ8864 device found, Revision:%x\n",
get_chip_rev(ids[1]));
}
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment