OMAP: DSS2: Add picodlp panel driver

PicoDLP is a micro projector from TI.

DLP used in OMAP4 is dpp2600 (DLP Pico Projector) The DLP requires
commands to be sent over i2c for configurations. To know more about
dpp2600 commands please visit:
https://focus.ti.com/myti/docs/extranet.tsp?sectionId=403

The picodlp module consists of a dss driver and an i2c_client.

To know more please visit:
http://www.omappedia.org/wiki/PicoDLP_projector_guide

Based on original design from Mythri P K <mythripk@ti.com>
Signed-off-by: Mayuresh Janorkar <mayur@ti.com>
Signed-off-by: Mythri P K <mythripk@ti.com>
[tomi.valkeinen@ti.com: squashed commits]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drivers/video/omap2/displays/Kconfig

@@ -30,6 +30,13 @@ config PANEL_NEC_NL8048HL11_01B
 		This NEC NL8048HL11-01B panel is TFT LCD
 		used in the Zoom2/3/3630 sdp boards.
 
+config PANEL_PICODLP
+	tristate "TI PICO DLP mini-projector"
+	depends on OMAP2_DSS && I2C
+	help
+		A mini-projector used in TI's SDP4430 and EVM boards
+		For more info please visit http://www.dlp.com/projector/
+
 config PANEL_TAAL
         tristate "Taal DSI Panel"
         depends on OMAP2_DSS_DSI

drivers/video/omap2/displays/Makefile

@@ -4,5 +4,6 @@ obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
 obj-$(CONFIG_PANEL_NEC_NL8048HL11_01B) += panel-nec-nl8048hl11-01b.o
 
 obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
+obj-$(CONFIG_PANEL_PICODLP) +=  panel-picodlp.o
 obj-$(CONFIG_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
 obj-$(CONFIG_PANEL_ACX565AKM) += panel-acx565akm.o

drivers/video/omap2/displays/panel-picodlp.c

+/*
+ * picodlp panel driver
+ * picodlp_i2c_driver: i2c_client driver
+ *
+ * Copyright (C) 2009-2011 Texas Instruments
+ * Author: Mythri P K <mythripk@ti.com>
+ * Mayuresh Janorkar <mayur@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-picodlp.h>
+
+#include "panel-picodlp.h"
+
+struct picodlp_data {
+	struct mutex lock;
+	struct i2c_client *picodlp_i2c_client;
+};
+
+static struct i2c_board_info picodlp_i2c_board_info = {
+	I2C_BOARD_INFO("picodlp_i2c_driver", 0x1b),
+};
+
+struct picodlp_i2c_data {
+	struct mutex xfer_lock;
+};
+
+static struct i2c_device_id picodlp_i2c_id[] = {
+	{ "picodlp_i2c_driver", 0 },
+};
+
+struct picodlp_i2c_command {
+	u8 reg;
+	u32 value;
+};
+
+static struct omap_video_timings pico_ls_timings = {
+	.x_res		= 864,
+	.y_res		= 480,
+	.hsw		= 7,
+	.hfp		= 11,
+	.hbp		= 7,
+
+	.pixel_clock	= 19200,
+
+	.vsw		= 2,
+	.vfp		= 3,
+	.vbp		= 14,
+};
+
+static inline struct picodlp_panel_data
+		*get_panel_data(const struct omap_dss_device *dssdev)
+{
+	return (struct picodlp_panel_data *) dssdev->data;
+}
+
+static u32 picodlp_i2c_read(struct i2c_client *client, u8 reg)
+{
+	u8 read_cmd[] = {READ_REG_SELECT, reg}, data[4];
+	struct picodlp_i2c_data *picodlp_i2c_data = i2c_get_clientdata(client);
+	struct i2c_msg msg[2];
+
+	mutex_lock(&picodlp_i2c_data->xfer_lock);
+
+	msg[0].addr = client->addr;
+	msg[0].flags = 0;
+	msg[0].len = 2;
+	msg[0].buf = read_cmd;
+
+	msg[1].addr = client->addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len = 4;
+	msg[1].buf = data;
+
+	i2c_transfer(client->adapter, msg, 2);
+	mutex_unlock(&picodlp_i2c_data->xfer_lock);
+	return (data[3] | (data[2] << 8) | (data[1] << 16) | (data[0] << 24));
+}
+
+static int picodlp_i2c_write_block(struct i2c_client *client,
+					u8 *data, int len)
+{
+	struct i2c_msg msg;
+	int i, r, msg_count = 1;
+
+	struct picodlp_i2c_data *picodlp_i2c_data = i2c_get_clientdata(client);
+
+	if (len < 1 || len > 32) {
+		dev_err(&client->dev,
+			"too long syn_write_block len %d\n", len);
+		return -EIO;
+	}
+	mutex_lock(&picodlp_i2c_data->xfer_lock);
+
+	msg.addr = client->addr;
+	msg.flags = 0;
+	msg.len = len;
+	msg.buf = data;
+	r = i2c_transfer(client->adapter, &msg, msg_count);
+	mutex_unlock(&picodlp_i2c_data->xfer_lock);
+
+	/*
+	 * i2c_transfer returns:
+	 * number of messages sent in case of success
+	 * a negative error number in case of failure
+	 */
+	if (r != msg_count)
+		goto err;
+
+	/* In case of success */
+	for (i = 0; i < len; i++)
+		dev_dbg(&client->dev,
+			"addr %x bw 0x%02x[%d]: 0x%02x\n",
+			client->addr, data[0] + i, i, data[i]);
+
+	return 0;
+err:
+	dev_err(&client->dev, "picodlp_i2c_write error\n");
+	return r;
+}
+
+static int picodlp_i2c_write(struct i2c_client *client, u8 reg, u32 value)
+{
+	u8 data[5];
+	int i;
+
+	data[0] = reg;
+	for (i = 1; i < 5; i++)
+		data[i] = (value >> (32 - (i) * 8)) & 0xFF;
+
+	return picodlp_i2c_write_block(client, data, 5);
+}
+
+static int picodlp_i2c_write_array(struct i2c_client *client,
+			const struct picodlp_i2c_command commands[],
+			int count)
+{
+	int i, r = 0;
+	for (i = 0; i < count; i++) {
+		r = picodlp_i2c_write(client, commands[i].reg,
+						commands[i].value);
+		if (r)
+			return r;
+	}
+	return r;
+}
+
+static int picodlp_wait_for_dma_done(struct i2c_client *client)
+{
+	u8 trial = 100;
+
+	do {
+		msleep(1);
+		if (!trial--)
+			return -ETIMEDOUT;
+	} while (picodlp_i2c_read(client, MAIN_STATUS) & DMA_STATUS);
+
+	return 0;
+}
+
+/**
+ * picodlp_i2c_init:	i2c_initialization routine
+ * client:	i2c_client for communication
+ *
+ * return
+ *		0	: Success, no error
+ *	error code	: Failure
+ */
+static int picodlp_i2c_init(struct i2c_client *client)
+{
+	int r;
+	static const struct picodlp_i2c_command init_cmd_set1[] = {
+		{SOFT_RESET, 1},
+		{DMD_PARK_TRIGGER, 1},
+		{MISC_REG, 5},
+		{SEQ_CONTROL, 0},
+		{SEQ_VECTOR, 0x100},
+		{DMD_BLOCK_COUNT, 7},
+		{DMD_VCC_CONTROL, 0x109},
+		{DMD_PARK_PULSE_COUNT, 0xA},
+		{DMD_PARK_PULSE_WIDTH, 0xB},
+		{DMD_PARK_DELAY, 0x2ED},
+		{DMD_SHADOW_ENABLE, 0},
+		{FLASH_OPCODE, 0xB},
+		{FLASH_DUMMY_BYTES, 1},
+		{FLASH_ADDR_BYTES, 3},
+		{PBC_CONTROL, 0},
+		{FLASH_START_ADDR, CMT_LUT_0_START_ADDR},
+		{FLASH_READ_BYTES, CMT_LUT_0_SIZE},
+		{CMT_SPLASH_LUT_START_ADDR, 0},
+		{CMT_SPLASH_LUT_DEST_SELECT, CMT_LUT_ALL},
+		{PBC_CONTROL, 1},
+	};
+
+	static const struct picodlp_i2c_command init_cmd_set2[] = {
+		{PBC_CONTROL, 0},
+		{CMT_SPLASH_LUT_DEST_SELECT, 0},
+		{PBC_CONTROL, 0},
+		{FLASH_START_ADDR, SEQUENCE_0_START_ADDR},
+		{FLASH_READ_BYTES, SEQUENCE_0_SIZE},
+		{SEQ_RESET_LUT_START_ADDR, 0},
+		{SEQ_RESET_LUT_DEST_SELECT, SEQ_SEQ_LUT},
+		{PBC_CONTROL, 1},
+	};
+
+	static const struct picodlp_i2c_command init_cmd_set3[] = {
+		{PBC_CONTROL, 0},
+		{SEQ_RESET_LUT_DEST_SELECT, 0},
+		{PBC_CONTROL, 0},
+		{FLASH_START_ADDR, DRC_TABLE_0_START_ADDR},
+		{FLASH_READ_BYTES, DRC_TABLE_0_SIZE},
+		{SEQ_RESET_LUT_START_ADDR, 0},
+		{SEQ_RESET_LUT_DEST_SELECT, SEQ_DRC_LUT_ALL},
+		{PBC_CONTROL, 1},
+	};
+
+	static const struct picodlp_i2c_command init_cmd_set4[] = {
+		{PBC_CONTROL, 0},
+		{SEQ_RESET_LUT_DEST_SELECT, 0},
+		{SDC_ENABLE, 1},
+		{AGC_CTRL, 7},
+		{CCA_C1A, 0x100},
+		{CCA_C1B, 0x0},
+		{CCA_C1C, 0x0},
+		{CCA_C2A, 0x0},
+		{CCA_C2B, 0x100},
+		{CCA_C2C, 0x0},
+		{CCA_C3A, 0x0},
+		{CCA_C3B, 0x0},
+		{CCA_C3C, 0x100},
+		{CCA_C7A, 0x100},
+		{CCA_C7B, 0x100},
+		{CCA_C7C, 0x100},
+		{CCA_ENABLE, 1},
+		{CPU_IF_MODE, 1},
+		{SHORT_FLIP, 1},
+		{CURTAIN_CONTROL, 0},
+		{DMD_PARK_TRIGGER, 0},
+		{R_DRIVE_CURRENT, 0x298},
+		{G_DRIVE_CURRENT, 0x298},
+		{B_DRIVE_CURRENT, 0x298},
+		{RGB_DRIVER_ENABLE, 7},
+		{SEQ_CONTROL, 0},
+		{ACTGEN_CONTROL, 0x10},
+		{SEQUENCE_MODE, SEQ_LOCK},
+		{DATA_FORMAT, RGB888},
+		{INPUT_RESOLUTION, WVGA_864_LANDSCAPE},
+		{INPUT_SOURCE, PARALLEL_RGB},
+		{CPU_IF_SYNC_METHOD, 1},
+		{SEQ_CONTROL, 1}
+	};
+
+	r = picodlp_i2c_write_array(client, init_cmd_set1,
+						ARRAY_SIZE(init_cmd_set1));
+	if (r)
+		return r;
+
+	r = picodlp_wait_for_dma_done(client);
+	if (r)
+		return r;
+
+	r = picodlp_i2c_write_array(client, init_cmd_set2,
+					ARRAY_SIZE(init_cmd_set2));
+	if (r)
+		return r;
+
+	r = picodlp_wait_for_dma_done(client);
+	if (r)
+		return r;
+
+	r = picodlp_i2c_write_array(client, init_cmd_set3,
+					ARRAY_SIZE(init_cmd_set3));
+	if (r)
+		return r;
+
+	r = picodlp_wait_for_dma_done(client);
+	if (r)
+		return r;
+
+	r = picodlp_i2c_write_array(client, init_cmd_set4,
+					ARRAY_SIZE(init_cmd_set4));
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static int picodlp_i2c_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct picodlp_i2c_data *picodlp_i2c_data;
+
+	picodlp_i2c_data = kzalloc(sizeof(struct picodlp_i2c_data), GFP_KERNEL);
+
+	if (!picodlp_i2c_data)
+		return -ENOMEM;
+
+	mutex_init(&picodlp_i2c_data->xfer_lock);
+	i2c_set_clientdata(client, picodlp_i2c_data);
+
+	return 0;
+}
+
+static int picodlp_i2c_remove(struct i2c_client *client)
+{
+	struct picodlp_i2c_data *picodlp_i2c_data =
+					i2c_get_clientdata(client);
+	kfree(picodlp_i2c_data);
+	return 0;
+}
+
+static struct i2c_driver picodlp_i2c_driver = {
+	.driver = {
+		.name	= "picodlp_i2c_driver",
+	},
+	.probe		= picodlp_i2c_probe,
+	.remove		= picodlp_i2c_remove,
+	.id_table	= picodlp_i2c_id,
+};
+
+static int picodlp_panel_power_on(struct omap_dss_device *dssdev)
+{
+	int r, trial = 100;
+	struct picodlp_data *picod = dev_get_drvdata(&dssdev->dev);
+	struct picodlp_panel_data *picodlp_pdata = get_panel_data(dssdev);
+
+	if (dssdev->platform_enable) {
+		r = dssdev->platform_enable(dssdev);
+		if (r)
+			return r;
+	}
+
+	gpio_set_value(picodlp_pdata->pwrgood_gpio, 0);
+	msleep(1);
+	gpio_set_value(picodlp_pdata->pwrgood_gpio, 1);
+
+	while (!gpio_get_value(picodlp_pdata->emu_done_gpio)) {
+		if (!trial--) {
+			dev_err(&dssdev->dev, "emu_done signal not"
+						" going high\n");
+			return -ETIMEDOUT;
+		}
+		msleep(5);
+	}
+	/*
+	 * As per dpp2600 programming guide,
+	 * it is required to sleep for 1000ms after emu_done signal goes high
+	 * then only i2c commands can be successfully sent to dpp2600
+	 */
+	msleep(1000);
+	if (omapdss_dpi_display_enable(dssdev)) {
+		dev_err(&dssdev->dev, "failed to enable DPI\n");
+		goto err1;
+	}
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	r = picodlp_i2c_init(picod->picodlp_i2c_client);
+	if (r)
+		goto err;
+
+	return r;
+err:
+	omapdss_dpi_display_disable(dssdev);
+err1:
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+
+	return r;
+}
+
+static void picodlp_panel_power_off(struct omap_dss_device *dssdev)
+{
+	struct picodlp_panel_data *picodlp_pdata = get_panel_data(dssdev);
+
+	omapdss_dpi_display_disable(dssdev);
+
+	gpio_set_value(picodlp_pdata->emu_done_gpio, 0);
+	gpio_set_value(picodlp_pdata->pwrgood_gpio, 0);
+
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+}
+
+static int picodlp_panel_probe(struct omap_dss_device *dssdev)
+{
+	struct picodlp_data *picod;
+	struct picodlp_panel_data *picodlp_pdata = get_panel_data(dssdev);
+	struct i2c_adapter *adapter;
+	struct i2c_client *picodlp_i2c_client;
+	int r = 0, picodlp_adapter_id;
+
+	dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_ONOFF |
+				OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IVS;
+	dssdev->panel.acb = 0x0;
+	dssdev->panel.timings = pico_ls_timings;
+
+	picod =  kzalloc(sizeof(struct picodlp_data), GFP_KERNEL);
+	if (!picod)
+		return -ENOMEM;
+
+	mutex_init(&picod->lock);
+
+	picodlp_adapter_id = picodlp_pdata->picodlp_adapter_id;
+
+	adapter = i2c_get_adapter(picodlp_adapter_id);
+	if (!adapter) {
+		dev_err(&dssdev->dev, "can't get i2c adapter\n");
+		r = -ENODEV;
+		goto err;
+	}
+
+	picodlp_i2c_client = i2c_new_device(adapter, &picodlp_i2c_board_info);
+	if (!picodlp_i2c_client) {
+		dev_err(&dssdev->dev, "can't add i2c device::"
+					 " picodlp_i2c_client is NULL\n");
+		r = -ENODEV;
+		goto err;
+	}
+
+	picod->picodlp_i2c_client = picodlp_i2c_client;
+
+	dev_set_drvdata(&dssdev->dev, picod);
+	return r;
+err:
+	kfree(picod);
+	return r;
+}
+
+static void picodlp_panel_remove(struct omap_dss_device *dssdev)
+{
+	struct picodlp_data *picod = dev_get_drvdata(&dssdev->dev);
+
+	i2c_unregister_device(picod->picodlp_i2c_client);
+	dev_set_drvdata(&dssdev->dev, NULL);
+	dev_dbg(&dssdev->dev, "removing picodlp panel\n");
+
+	kfree(picod);
+}
+
+static int picodlp_panel_enable(struct omap_dss_device *dssdev)
+{
+	struct picodlp_data *picod = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	dev_dbg(&dssdev->dev, "enabling picodlp panel\n");
+
+	mutex_lock(&picod->lock);
+	if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
+		mutex_unlock(&picod->lock);
+		return -EINVAL;
+	}
+
+	r = picodlp_panel_power_on(dssdev);
+	mutex_unlock(&picod->lock);
+
+	return r;
+}
+
+static void picodlp_panel_disable(struct omap_dss_device *dssdev)
+{
+	struct picodlp_data *picod = dev_get_drvdata(&dssdev->dev);
+
+	mutex_lock(&picod->lock);
+	/* Turn off DLP Power */
+	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
+		picodlp_panel_power_off(dssdev);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+	mutex_unlock(&picod->lock);
+
+	dev_dbg(&dssdev->dev, "disabling picodlp panel\n");
+}
+
+static int picodlp_panel_suspend(struct omap_dss_device *dssdev)
+{
+	struct picodlp_data *picod = dev_get_drvdata(&dssdev->dev);
+
+	mutex_lock(&picod->lock);
+	/* Turn off DLP Power */
+	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) {
+		mutex_unlock(&picod->lock);
+		dev_err(&dssdev->dev, "unable to suspend picodlp panel,"
+					" panel is not ACTIVE\n");
+		return -EINVAL;
+	}
+
+	picodlp_panel_power_off(dssdev);
+
+	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+	mutex_unlock(&picod->lock);
+
+	dev_dbg(&dssdev->dev, "suspending picodlp panel\n");
+	return 0;
+}
+
+static int picodlp_panel_resume(struct omap_dss_device *dssdev)
+{
+	struct picodlp_data *picod = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	mutex_lock(&picod->lock);
+	if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) {
+		mutex_unlock(&picod->lock);
+		dev_err(&dssdev->dev, "unable to resume picodlp panel,"
+			" panel is not ACTIVE\n");
+		return -EINVAL;
+	}
+
+	r = picodlp_panel_power_on(dssdev);
+	mutex_unlock(&picod->lock);
+	dev_dbg(&dssdev->dev, "resuming picodlp panel\n");
+	return r;
+}
+
+static void picodlp_get_resolution(struct omap_dss_device *dssdev,
+					u16 *xres, u16 *yres)
+{
+	*xres = dssdev->panel.timings.x_res;
+	*yres = dssdev->panel.timings.y_res;
+}
+
+static struct omap_dss_driver picodlp_driver = {
+	.probe		= picodlp_panel_probe,
+	.remove		= picodlp_panel_remove,
+
+	.enable		= picodlp_panel_enable,
+	.disable	= picodlp_panel_disable,
+
+	.get_resolution	= picodlp_get_resolution,
+
+	.suspend	= picodlp_panel_suspend,
+	.resume		= picodlp_panel_resume,
+
+	.driver		= {
+		.name	= "picodlp_panel",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init picodlp_init(void)
+{
+	int r = 0;
+
+	r = i2c_add_driver(&picodlp_i2c_driver);
+	if (r) {
+		printk(KERN_WARNING "picodlp_i2c_driver" \
+			" registration failed\n");
+		return r;
+	}
+
+	r = omap_dss_register_driver(&picodlp_driver);
+	if (r)
+		i2c_del_driver(&picodlp_i2c_driver);
+
+	return r;
+}
+
+static void __exit picodlp_exit(void)
+{
+	i2c_del_driver(&picodlp_i2c_driver);
+	omap_dss_unregister_driver(&picodlp_driver);
+}
+
+module_init(picodlp_init);
+module_exit(picodlp_exit);
+
+MODULE_AUTHOR("Mythri P K <mythripk@ti.com>");
+MODULE_DESCRIPTION("picodlp driver");
+MODULE_LICENSE("GPL");

drivers/video/omap2/displays/panel-picodlp.h

+/*
+ * Header file required by picodlp panel driver
+ *
+ * Copyright (C) 2009-2011 Texas Instruments
+ * Author: Mythri P K <mythripk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __OMAP2_DISPLAY_PANEL_PICODLP_H
+#define __OMAP2_DISPLAY_PANEL_PICODLP_H
+
+/* Commands used for configuring picodlp panel */
+
+#define MAIN_STATUS			0x03
+#define PBC_CONTROL			0x08
+#define INPUT_SOURCE			0x0B
+#define INPUT_RESOLUTION		0x0C
+#define DATA_FORMAT			0x0D
+#define IMG_ROTATION			0x0E
+#define LONG_FLIP			0x0F
+#define SHORT_FLIP			0x10
+#define TEST_PAT_SELECT			0x11
+#define R_DRIVE_CURRENT			0x12
+#define G_DRIVE_CURRENT			0x13
+#define B_DRIVE_CURRENT			0x14
+#define READ_REG_SELECT			0x15
+#define RGB_DRIVER_ENABLE		0x16
+
+#define CPU_IF_MODE			0x18
+#define FRAME_RATE			0x19
+#define CPU_IF_SYNC_METHOD		0x1A
+#define CPU_IF_SOF			0x1B
+#define CPU_IF_EOF			0x1C
+#define CPU_IF_SLEEP			0x1D
+
+#define SEQUENCE_MODE			0x1E
+#define SOFT_RESET			0x1F
+#define FRONT_END_RESET			0x21
+#define AUTO_PWR_ENABLE			0x22
+
+#define VSYNC_LINE_DELAY		0x23
+#define CPU_PI_HORIZ_START		0x24
+#define CPU_PI_VERT_START		0x25
+#define CPU_PI_HORIZ_WIDTH		0x26
+#define CPU_PI_VERT_HEIGHT		0x27
+
+#define PIXEL_MASK_CROP			0x28
+#define CROP_FIRST_LINE			0x29
+#define CROP_LAST_LINE			0x2A
+#define CROP_FIRST_PIXEL		0x2B
+#define CROP_LAST_PIXEL			0x2C
+#define DMD_PARK_TRIGGER		0x2D
+
+#define MISC_REG			0x30
+
+/* AGC registers */
+#define AGC_CTRL			0x50
+#define AGC_CLIPPED_PIXS		0x55
+#define AGC_BRIGHT_PIXS			0x56
+#define AGC_BG_PIXS			0x57
+#define AGC_SAFETY_MARGIN		0x17
+
+/* Color Coordinate Adjustment registers */
+#define CCA_ENABLE		0x5E
+#define CCA_C1A			0x5F
+#define CCA_C1B			0x60
+#define CCA_C1C			0x61
+#define CCA_C2A			0x62
+#define CCA_C2B			0x63
+#define CCA_C2C			0x64
+#define CCA_C3A			0x65
+#define CCA_C3B			0x66
+#define CCA_C3C			0x67
+#define CCA_C7A			0x71
+#define CCA_C7B			0x72
+#define CCA_C7C			0x73
+
+/**
+ * DLP Pico Processor 2600 comes with flash
+ * We can do DMA operations from flash for accessing Look Up Tables
+ */
+#define DMA_STATUS			0x100
+#define FLASH_ADDR_BYTES		0x74
+#define FLASH_DUMMY_BYTES		0x75
+#define FLASH_WRITE_BYTES		0x76
+#define FLASH_READ_BYTES		0x77
+#define FLASH_OPCODE			0x78
+#define FLASH_START_ADDR		0x79
+#define FLASH_DUMMY2			0x7A
+#define FLASH_WRITE_DATA		0x7B
+
+#define TEMPORAL_DITH_DISABLE		0x7E
+#define SEQ_CONTROL			0x82
+#define SEQ_VECTOR			0x83
+
+/* DMD is Digital Micromirror Device */
+#define DMD_BLOCK_COUNT			0x84
+#define DMD_VCC_CONTROL			0x86
+#define DMD_PARK_PULSE_COUNT		0x87
+#define DMD_PARK_PULSE_WIDTH		0x88
+#define DMD_PARK_DELAY			0x89
+#define DMD_SHADOW_ENABLE		0x8E
+#define SEQ_STATUS			0x8F
+#define FLASH_CLOCK_CONTROL		0x98
+#define DMD_PARK			0x2D
+
+#define SDRAM_BIST_ENABLE		0x46
+#define DDR_DRIVER_STRENGTH		0x9A
+#define SDC_ENABLE			0x9D
+#define SDC_BUFF_SWAP_DISABLE		0xA3
+#define CURTAIN_CONTROL			0xA6
+#define DDR_BUS_SWAP_ENABLE		0xA7
+#define DMD_TRC_ENABLE			0xA8
+#define DMD_BUS_SWAP_ENABLE		0xA9
+
+#define ACTGEN_ENABLE			0xAE
+#define ACTGEN_CONTROL			0xAF
+#define ACTGEN_HORIZ_BP			0xB0
+#define ACTGEN_VERT_BP			0xB1
+
+/* Look Up Table access */
+#define CMT_SPLASH_LUT_START_ADDR	0xFA
+#define CMT_SPLASH_LUT_DEST_SELECT	0xFB
+#define CMT_SPLASH_LUT_DATA		0xFC
+#define SEQ_RESET_LUT_START_ADDR	0xFD
+#define SEQ_RESET_LUT_DEST_SELECT	0xFE
+#define SEQ_RESET_LUT_DATA		0xFF
+
+/* Input source definitions */
+#define PARALLEL_RGB		0
+#define INT_TEST_PATTERN	1
+#define SPLASH_SCREEN		2
+#define CPU_INTF		3
+#define BT656			4
+
+/* Standard input resolution definitions */
+#define QWVGA_LANDSCAPE		3	/* (427h*240v) */
+#define WVGA_864_LANDSCAPE	21	/* (864h*480v) */
+#define WVGA_DMD_OPTICAL_TEST	35	/* (608h*684v) */
+
+/* Standard data format definitions */
+#define RGB565			0
+#define RGB666			1
+#define RGB888			2
+
+/* Test Pattern definitions */
+#define TPG_CHECKERBOARD	0
+#define TPG_BLACK		1
+#define TPG_WHITE		2
+#define TPG_RED			3
+#define TPG_BLUE		4
+#define TPG_GREEN		5
+#define TPG_VLINES_BLACK	6
+#define TPG_HLINES_BLACK	7
+#define TPG_VLINES_ALT		8
+#define TPG_HLINES_ALT		9
+#define TPG_DIAG_LINES		10
+#define TPG_GREYRAMP_VERT	11
+#define TPG_GREYRAMP_HORIZ	12
+#define TPG_ANSI_CHECKERBOARD	13
+
+/* sequence mode definitions */
+#define SEQ_FREE_RUN		0
+#define SEQ_LOCK		1
+
+/* curtain color definitions */
+#define CURTAIN_BLACK		0
+#define CURTAIN_RED		1
+#define CURTAIN_GREEN		2
+#define CURTAIN_BLUE		3
+#define CURTAIN_YELLOW		4
+#define CURTAIN_MAGENTA		5
+#define CURTAIN_CYAN		6
+#define CURTAIN_WHITE		7
+
+/* LUT definitions */
+#define CMT_LUT_NONE		0
+#define CMT_LUT_GREEN		1
+#define CMT_LUT_RED		2
+#define CMT_LUT_BLUE		3
+#define CMT_LUT_ALL		4
+#define SPLASH_LUT		5
+
+#define SEQ_LUT_NONE		0
+#define SEQ_DRC_LUT_0		1
+#define SEQ_DRC_LUT_1		2
+#define SEQ_DRC_LUT_2		3
+#define SEQ_DRC_LUT_3		4
+#define SEQ_SEQ_LUT		5
+#define SEQ_DRC_LUT_ALL		6
+#define WPC_PROGRAM_LUT		7
+
+#define BITSTREAM_START_ADDR		0x00000000
+#define BITSTREAM_SIZE			0x00040000
+
+#define WPC_FW_0_START_ADDR		0x00040000
+#define WPC_FW_0_SIZE			0x00000ce8
+
+#define SEQUENCE_0_START_ADDR		0x00044000
+#define SEQUENCE_0_SIZE			0x00001000
+
+#define SEQUENCE_1_START_ADDR		0x00045000
+#define SEQUENCE_1_SIZE			0x00000d10
+
+#define SEQUENCE_2_START_ADDR		0x00046000
+#define SEQUENCE_2_SIZE			0x00000d10
+
+#define SEQUENCE_3_START_ADDR		0x00047000
+#define SEQUENCE_3_SIZE			0x00000d10
+
+#define SEQUENCE_4_START_ADDR		0x00048000
+#define SEQUENCE_4_SIZE			0x00000d10
+
+#define SEQUENCE_5_START_ADDR		0x00049000
+#define SEQUENCE_5_SIZE			0x00000d10
+
+#define SEQUENCE_6_START_ADDR		0x0004a000
+#define SEQUENCE_6_SIZE			0x00000d10
+
+#define CMT_LUT_0_START_ADDR		0x0004b200
+#define CMT_LUT_0_SIZE			0x00000600
+
+#define CMT_LUT_1_START_ADDR		0x0004b800
+#define CMT_LUT_1_SIZE			0x00000600
+
+#define CMT_LUT_2_START_ADDR		0x0004be00
+#define CMT_LUT_2_SIZE			0x00000600
+
+#define CMT_LUT_3_START_ADDR		0x0004c400
+#define CMT_LUT_3_SIZE			0x00000600
+
+#define CMT_LUT_4_START_ADDR		0x0004ca00
+#define CMT_LUT_4_SIZE			0x00000600
+
+#define CMT_LUT_5_START_ADDR		0x0004d000
+#define CMT_LUT_5_SIZE			0x00000600
+
+#define CMT_LUT_6_START_ADDR		0x0004d600
+#define CMT_LUT_6_SIZE			0x00000600
+
+#define DRC_TABLE_0_START_ADDR		0x0004dc00
+#define DRC_TABLE_0_SIZE		0x00000100
+
+#define SPLASH_0_START_ADDR		0x0004dd00
+#define SPLASH_0_SIZE			0x00032280
+
+#define SEQUENCE_7_START_ADDR		0x00080000
+#define SEQUENCE_7_SIZE			0x00000d10
+
+#define SEQUENCE_8_START_ADDR		0x00081800
+#define SEQUENCE_8_SIZE			0x00000d10
+
+#define SEQUENCE_9_START_ADDR		0x00083000
+#define SEQUENCE_9_SIZE			0x00000d10
+
+#define CMT_LUT_7_START_ADDR		0x0008e000
+#define CMT_LUT_7_SIZE			0x00000600
+
+#define CMT_LUT_8_START_ADDR		0x0008e800
+#define CMT_LUT_8_SIZE			0x00000600
+
+#define CMT_LUT_9_START_ADDR		0x0008f000
+#define CMT_LUT_9_SIZE			0x00000600
+
+#define SPLASH_1_START_ADDR		0x0009a000
+#define SPLASH_1_SIZE			0x00032280
+
+#define SPLASH_2_START_ADDR		0x000cd000
+#define SPLASH_2_SIZE			0x00032280
+
+#define SPLASH_3_START_ADDR		0x00100000
+#define SPLASH_3_SIZE			0x00032280
+
+#define OPT_SPLASH_0_START_ADDR		0x00134000
+#define OPT_SPLASH_0_SIZE		0x000cb100
+
+#endif

include/video/omap-panel-picodlp.h

+/*
+ * panel data for picodlp panel
+ *
+ * Copyright (C) 2011 Texas Instruments
+ *
+ * Author: Mayuresh Janorkar <mayur@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __PANEL_PICODLP_H
+#define __PANEL_PICODLP_H
+/**
+ * struct : picodlp panel data
+ * picodlp_adapter_id:	i2c_adapter number for picodlp
+ */
+struct picodlp_panel_data {
+	int picodlp_adapter_id;
+	int emu_done_gpio;
+	int pwrgood_gpio;
+};
+#endif /* __PANEL_PICODLP_H */