Skip to content

L
linux
Commit 2472788a authored by Paul Mackerras's avatar Paul Mackerras
Browse files
Options

Merge bk://ppc@ppc.bkbits.net/for-linus-ppc 

into cargo.(none):/home/paulus/kernel/for-linus-ppc
parents b45a640b 03aed178
Show whitespace changes
Inline Side-by-side
Showing with 305 additions and 431 deletions
arch/ppc/4xx_io/Config.in deleted 100644 → 0
View file @ b45a640b
#
# MPC4xx driver options
#
mainmenu_option next_comment
comment 'MPC4xx Driver Options'
if [ "$CONFIG_STB03xxx" = "y" ]; then
bool 'STB IR Keyboard' CONFIG_STB_KB
bool 'SICC Serial port' CONFIG_SERIAL_SICC
if [ "$CONFIG_SERIAL_SICC" = "y" -a "$CONFIG_UART0_TTYS1" = "y" ]; then
define_bool CONFIG_UART1_DFLT_CONSOLE y
define_bool CONFIG_SERIAL_SICC_CONSOLE y
fi
fi
endmenu
arch/ppc/config.in
View file @ 2472788a
......@@ -294,6 +294,11 @@ if [ "$CONFIG_ADVANCED_OPTIONS" = "y" ]; then
fi
fi
if [ "$CONFIG_ALL_PPC" = "y" ]; then
bool 'Support for ISA-bus hardware' CONFIG_ISA
else
define_bool CONFIG_ISA n
fi
define_bool CONFIG_EISA n
define_bool CONFIG_SBUS n
......@@ -322,12 +327,6 @@ else
fi
fi
if [ "$CONFIG_ALL_PPC" = "y" ]; then
bool 'Support for ISA-bus hardware' CONFIG_ISA
else
define_bool CONFIG_ISA n
fi
# only elf supported, a.out is not -- Cort
if [ "$CONFIG_PROC_FS" = "y" ]; then
define_bool CONFIG_KCORE_ELF y
......@@ -588,8 +587,18 @@ if [ "$CONFIG_8260" = "y" ]; then
source arch/ppc/8260_io/Config.in
fi
if [ "$CONFIG_4xx" = "y" ]; then
source arch/ppc/4xx_io/Config.in
if [ "$CONFIG_4xx" = "y"]; then
mainmenu_option next_comment
comment 'IBM 4xx options'
if [ "$CONFIG_STB03xxx" = "y" ]; then
bool 'STB IR Keyboard' CONFIG_STB_KB
bool 'SICC Serial port' CONFIG_SERIAL_SICC
if [ "$CONFIG_SERIAL_SICC" = "y" -a "$CONFIG_UART0_TTYS1" = "y" ]; then
define_bool CONFIG_UART1_DFLT_CONSOLE y
define_bool CONFIG_SERIAL_SICC_CONSOLE y
fi
fi
endmenu
fi
source drivers/usb/Config.in
......@@ -598,6 +607,8 @@ if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
source net/bluetooth/Config.in
fi
source lib/Config.in
mainmenu_option next_comment
comment 'Kernel hacking'
......@@ -629,5 +640,3 @@ if [ "$CONFIG_MCPN765" = "y" -o "$CONFIG_SANDPOINT" = "y" \
bool 'Support for early boot texts over serial port' CONFIG_SERIAL_TEXT_DEBUG
fi
endmenu
source lib/Config.in
arch/ppc/kernel/entry.S
View file @ 2472788a
......@@ -41,6 +41,72 @@
#undef SHOW_SYSCALLS
#undef SHOW_SYSCALLS_TASK
#ifndef CONFIG_PPC_ISERIES /* iSeries version is in iSeries_head.S */
/*
* This code finishes saving the registers to the exception frame
* and jumps to the appropriate handler for the exception, turning
* on address translation.
*/
.globl transfer_to_handler
transfer_to_handler:
stw r22,_NIP(r21)
stw r23,_MSR(r21)
SAVE_4GPRS(8, r21)
SAVE_8GPRS(12, r21)
SAVE_8GPRS(24, r21)
andi. r23,r23,MSR_PR
mfspr r23,SPRG3
addi r2,r23,-THREAD /* set r2 to current */
tovirt(r2,r2)
beq 2f /* if from user, fix up THREAD.regs */
addi r24,r1,STACK_FRAME_OVERHEAD
stw r24,PT_REGS(r23)
#ifdef CONFIG_ALTIVEC
BEGIN_FTR_SECTION
mfspr r22,SPRN_VRSAVE /* if G4, save vrsave register value */
stw r22,THREAD_VRSAVE(r23)
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif /* CONFIG_ALTIVEC */
b 3f
2: /* if from kernel, check for stack overflow */
lwz r22,THREAD_INFO-THREAD(r23)
cmplw r1,r22 /* if r1 <= current->thread_info */
ble- stack_ovf /* then the kernel stack overflowed */
3:
mflr r23
andi. r24,r23,0x3f00 /* get vector offset */
stw r24,TRAP(r21)
li r22,0
stw r22,RESULT(r21)
mtspr SPRG2,r22 /* r1 is now kernel sp */
lwz r24,0(r23) /* virtual address of handler */
lwz r23,4(r23) /* where to go when done */
FIX_SRR1(r20,r22)
mtspr SRR0,r24
mtspr SRR1,r20
mtlr r23
SYNC
RFI /* jump to handler, enable MMU */
/*
* On kernel stack overflow, load up an initial stack pointer
* and call StackOverflow(regs), which should not return.
*/
stack_ovf:
addi r3,r1,STACK_FRAME_OVERHEAD
lis r1,init_thread_union@ha
addi r1,r1,init_thread_union@l
addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
lis r24,StackOverflow@ha
addi r24,r24,StackOverflow@l
li r20,MSR_KERNEL
FIX_SRR1(r20,r22)
mtspr SRR0,r24
mtspr SRR1,r20
SYNC
RFI
#endif /* CONFIG_PPC_ISERIES */
#ifdef SHOW_SYSCALLS_TASK
.data
show_syscalls_task:
......@@ -277,7 +343,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
.globl ret_from_fork
ret_from_fork:
#ifdef CONFIG_SMP
bl schedule_tail
#endif
rlwinm r3,r1,0,0,18
lwz r3,TI_FLAGS(r3)
andi. r0,r3,_TIF_SYSCALL_TRACE
......
arch/ppc/kernel/head.S
View file @ 2472788a
......@@ -734,69 +734,6 @@ InstructionSegment:
b InstructionSegmentCont
#endif /* CONFIG_PPC64BRIDGE */
/*
* This code finishes saving the registers to the exception frame
* and jumps to the appropriate handler for the exception, turning
* on address translation.
*/
.globl transfer_to_handler
transfer_to_handler:
stw r22,_NIP(r21)
stw r23,_MSR(r21)
SAVE_4GPRS(8, r21)
SAVE_8GPRS(12, r21)
SAVE_8GPRS(24, r21)
andi. r23,r23,MSR_PR
mfspr r23,SPRG3 /* if from user, fix up THREAD.regs */
beq 2f
addi r24,r1,STACK_FRAME_OVERHEAD
stw r24,PT_REGS(r23)
#ifdef CONFIG_ALTIVEC
BEGIN_FTR_SECTION
mfspr r22,SPRN_VRSAVE /* if G4, save vrsave register value */
stw r22,THREAD_VRSAVE(r23)
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif /* CONFIG_ALTIVEC */
2: addi r2,r23,-THREAD /* set r2 to current */
tovirt(r2,r2)
mflr r23
andi. r24,r23,0x3f00 /* get vector offset */
stw r24,TRAP(r21)
li r22,0
stw r22,RESULT(r21)
mtspr SPRG2,r22 /* r1 is now kernel sp */
addi r24,r2,TASK_STRUCT_SIZE /* check for kernel stack overflow */
cmplw 0,r1,r2
cmplw 1,r1,r24
crand 1,1,4
bgt- stack_ovf /* if r2 < r1 < r2+TASK_STRUCT_SIZE */
lwz r24,0(r23) /* virtual address of handler */
lwz r23,4(r23) /* where to go when done */
FIX_SRR1(r20,r22)
mtspr SRR0,r24
mtspr SRR1,r20
mtlr r23
SYNC
RFI /* jump to handler, enable MMU */
/*
* On kernel stack overflow, load up an initial stack pointer
* and call StackOverflow(regs), which should not return.
*/
stack_ovf:
addi r3,r1,STACK_FRAME_OVERHEAD
lis r1,init_thread_union@ha
addi r1,r1,init_thread_union@l
addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
lis r24,StackOverflow@ha
addi r24,r24,StackOverflow@l
li r20,MSR_KERNEL
FIX_SRR1(r20,r22)
mtspr SRR0,r24
mtspr SRR1,r20
SYNC
RFI
/*
* This task wants to use the FPU now.
* On UP, disable FP for the task which had the FPU previously,
......@@ -1221,15 +1158,15 @@ __secondary_start:
bl identify_cpu
bl call_setup_cpu /* Call setup_cpu for this CPU */
/* get current */
lis r2,current_set@h
ori r2,r2,current_set@l
tophys(r2,r2)
slwi r24,r24,2 /* get current_set[cpu#] */
lwzx r2,r2,r24
/* get current_thread_info and current */
lis r1,secondary_ti@ha
tophys(r1,r1)
lwz r1,secondary_ti@l(r1)
tophys(r2,r1)
lwz r2,TI_TASK(r2)
/* stack */
addi r1,r2,THREAD_SIZE-STACK_FRAME_OVERHEAD
addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
li r0,0
tophys(r3,r1)
stw r0,0(r3)
......@@ -1727,10 +1664,6 @@ m8260_gorom:
.data
.globl sdata
sdata:
.globl init_thread_union
init_thread_union:
.space 8192
.globl empty_zero_page
empty_zero_page:
.space 4096
......
arch/ppc/kernel/head_4xx.S
View file @ 2472788a
......@@ -826,87 +826,6 @@ finish_tlb_load:
PPC405_ERR77_SYNC
rfi /* Should sync shadow TLBs */
/* This code finishes saving the registers to the exception frame
* and jumps to the appropriate handler for the exception, turning
* on address translation.
*/
_GLOBAL(transfer_to_handler)
stw r22,_NIP(r21) /* Save the faulting IP on the stack */
stw r23,_MSR(r21) /* Save the exception MSR on stack */
SAVE_4GPRS(8, r21) /* Save r8 through r11 on the stack */
SAVE_8GPRS(12, r21) /* Save r12 through r19 on the stack */
SAVE_8GPRS(24, r21) /* Save r24 through r31 on the stack */
andi. r23,r23,MSR_PR /* Is this from user space? */
mfspr r23,SPRN_SPRG3 /* If from user, fix up THREAD.regs */
beq 2f /* No, it is from the kernel; branch. */
addi r24,r1,STACK_FRAME_OVERHEAD
stw r24,PT_REGS(r23)
2: addi r2,r23,-THREAD /* Set r2 to current thread */
tovirt(r2,r2)
mflr r23
andi. r24,r23,0x3f00 /* Get vector offset */
stw r24,TRAP(r21)
li r22,RESULT
/* No need to put an erratum #77 workaround here
because interrupts are currently disabled */
stwcx. r22,r22,r21 /* Clear the reservation */
li r22,0
stw r22,RESULT(r21)
mtspr SPRN_SPRG2,r22 /* r1 is now the kernel stack pointer */
addi r24,r2,TASK_STRUCT_SIZE /* Check for kernel stack overflow */
cmplw cr0,r1,r2
cmplw cr1,r1,r24
crand cr1,cr1,cr4
bgt- stack_ovf /* If r2 < r1 < r2 + TASK_STRUCT_SIZE */
lwz r24,0(r23) /* Virtual address of the handler */
lwz r23,4(r23) /* Handler return pointer */
cmpwi cr0,r7,STND_EXC /* What type of exception is this? */
bne 3f /* It is a critical exception... */
/* Standard exception jump path
*/
/* We have to recover r7 from the register save stack.
* It was used to indicate standard/critical exception. In
* the case of a standard exception that is the system call
* trap, it may have originally contained one of the syscall
* parameters and we have to get it back now.
*/
lwz r7,GPR7(r21)
mtspr SPRN_SRR0,r24 /* Set up the instruction pointer */
mtspr SPRN_SRR1,r20 /* Set up the machine state register */
mtlr r23 /* Set up the return pointer */
SYNC
/* We shouldn't need a 405 erratum #77 workaround here, because we're not
* actually returning to the interrupted instruction yet. */
rfi
/* Critical exception jump path
*/
3: mtspr SPRN_SRR2,r24 /* Set up the instruction pointer */
mtspr SPRN_SRR3,r20 /* Set up the machine state register */
mtlr r23 /* Set up the return pointer */
SYNC
rfci
/* On kernel stack overlow, load up an initial stack pointer and call
* StackOverflow(regs), which should NOT return.
*/
stack_ovf:
addi r3,r1,STACK_FRAME_OVERHEAD
lis r1,init_thread_union@ha
addi r1,r1,init_thread_union@l
addi r1,r1,THREAD_SIZE - STACK_FRAME_OVERHEAD
lis r24,StackOverflow@ha
addi r24,r24,StackOverflow@l
li r20,MSR_KERNEL
mtspr SPRN_SRR0,r24
mtspr SPRN_SRR1,r20
SYNC
rfi
/* extern void giveup_altivec(struct task_struct *prev)
*
* The PowerPC 4xx family of processors do not have AltiVec capabilities, so
......@@ -1082,8 +1001,6 @@ _GLOBAL(set_context)
*/
.data
_GLOBAL(sdata)
_GLOBAL(init_thread_union)
.space 8192
_GLOBAL(empty_zero_page)
.space 4096
_GLOBAL(swapper_pg_dir)
......
arch/ppc/kernel/head_8xx.S
View file @ 2472788a
......@@ -637,63 +637,6 @@ DataTLBError:
. = 0x2000
/*
* This code finishes saving the registers to the exception frame
* and jumps to the appropriate handler for the exception, turning
* on address translation.
*/
.globl transfer_to_handler
transfer_to_handler:
stw r22,_NIP(r21)
lis r22,MSR_POW@h
andc r23,r23,r22
stw r23,_MSR(r21)
SAVE_4GPRS(8, r21)
SAVE_8GPRS(12, r21)
SAVE_8GPRS(24, r21)
andi. r23,r23,MSR_PR
mfspr r23,SPRG3 /* if from user, fix up THREAD.regs */
beq 2f
addi r24,r1,STACK_FRAME_OVERHEAD
stw r24,PT_REGS(r23)
2: addi r2,r23,-THREAD /* set r2 to current */
tovirt(r2,r2)
mflr r23
andi. r24,r23,0x3f00 /* get vector offset */
stw r24,TRAP(r21)
li r22,0
stw r22,RESULT(r21)
mtspr SPRG2,r22 /* r1 is now kernel sp */
addi r24,r2,TASK_STRUCT_SIZE /* check for kernel stack overflow */
cmplw 0,r1,r2
cmplw 1,r1,r24
crand 1,1,4
bgt- stack_ovf /* if r2 < r1 < r2+TASK_STRUCT_SIZE */
lwz r24,0(r23) /* virtual address of handler */
lwz r23,4(r23) /* where to go when done */
mtspr SRR0,r24
mtspr SRR1,r20
mtlr r23
SYNC
rfi /* jump to handler, enable MMU */
/*
* On kernel stack overflow, load up an initial stack pointer
* and call StackOverflow(regs), which should not return.
*/
stack_ovf:
addi r3,r1,STACK_FRAME_OVERHEAD
lis r1,init_thread_union@ha
addi r1,r1,init_thread_union@l
addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
lis r24,StackOverflow@ha
addi r24,r24,StackOverflow@l
li r20,MSR_KERNEL
mtspr SRR0,r24
mtspr SRR1,r20
SYNC
rfi
.globl giveup_fpu
giveup_fpu:
blr
......@@ -707,7 +650,6 @@ _GLOBAL(__setup_cpu_8xx)
* This is where the main kernel code starts.
*/
start_here:
/* ptr to current */
lis r2,init_task@h
ori r2,r2,init_task@l
......@@ -971,10 +913,6 @@ set_dec_cpu6:
.data
.globl sdata
sdata:
.globl init_thread_union
init_thread_union:
.space 8192
.globl empty_zero_page
empty_zero_page:
.space 4096
......
arch/ppc/kernel/iSeries_head.S
View file @ 2472788a
......@@ -531,13 +531,17 @@ transfer_to_handler:
SAVE_GPR(31, r1)
andi. r23,r23,MSR_PR
mfspr r23,SPRG3 /* if from user, fix up THREAD.regs */
beq 2f
mfspr r23,SPRG3
addi r2,r23,-THREAD /* set r2 to current */
beq 2f /* if from user, fix up THREAD.regs */
addi r24,r1,STACK_FRAME_OVERHEAD
stw r24,PT_REGS(r23)
2: addi r2,r23,-THREAD /* set r2 to current */
li r22,RESULT
stwcx. r22,r22,r1 /* to clear the reservation */
b 3f
2: /* if from kernel, check for stack overflow */
lwz r22,THREAD_INFO(r2)
cmplw r1,r22 /* if r1 <= current->thread_info */
ble- stack_ovf /* then the kernel stack overflowed */
3:
li r22,0
stw r22,RESULT(r1)
mfspr r23,SPRG1 /* Get Paca address */
......@@ -545,11 +549,6 @@ transfer_to_handler:
mflr r23
andi. r24,r23,0x3f00 /* get vector offset */
stw r24,TRAP(r1)
addi r24,r2,TASK_STRUCT_SIZE /* check for kernel stack overflow */
cmplw 0,r1,r2
cmplw 1,r1,r24
crand 1,1,4
bgt- stack_ovf /* if r2 < r1 < r2+TASK_STRUCT_SIZE */
lwz r24,0(r23) /* virtual address of handler */
lwz r23,4(r23) /* where to go when done */
li r20,MSR_KERNEL
......@@ -1496,11 +1495,6 @@ _GLOBAL(abort)
.data
.globl sdata
sdata:
.globl init_thread_union
init_thread_union:
.space 8192
.globl empty_zero_page
empty_zero_page:
.space 4096
......
arch/ppc/kernel/irq.c
View file @ 2472788a
......@@ -586,8 +586,6 @@ atomic_t global_bh_count;
static void show(char * str)
{
int i;
unsigned long *stack;
int cpu = smp_processor_id();
printk("\n%s, CPU %d:\n", str, cpu);
......@@ -598,13 +596,6 @@ static void show(char * str)
atomic_read(&global_bh_count),
local_bh_count(0),
local_bh_count(1));
stack = (unsigned long *) &str;
for (i = 40; i ; i--) {
unsigned long x = *++stack;
if (x > (unsigned long) &init_task_union && x < (unsigned long) &vsprintf) {
printk("<[%08lx]> ", x);
}
}
}
static inline void wait_on_bh(void)
......
arch/ppc/kernel/misc.S
View file @ 2472788a
......@@ -25,6 +25,7 @@
#include <asm/cputable.h>
#include <asm/mmu.h>
#include <asm/ppc_asm.h>
#include <asm/thread_info.h>
#include "ppc_defs.h"
.text
......@@ -375,7 +376,8 @@ _GLOBAL(_tlbia)
SYNC
lis r9,hash_table_lock@h
ori r9,r9,hash_table_lock@l
lwz r8,CPU(r2)
rlwinm r8,r1,0,0,18
lwz r8,TI_CPU(r8)
oris r8,r8,10
10: lwarx r7,0,r9
cmpi 0,r7,0
......@@ -420,7 +422,8 @@ _GLOBAL(_tlbie)
SYNC
lis r9,hash_table_lock@h
ori r9,r9,hash_table_lock@l
lwz r8,CPU(r2)
rlwinm r8,r1,0,0,18
lwz r8,TI_CPU(r8)
oris r8,r8,11
10: lwarx r7,0,r9
cmpi 0,r7,0
......
arch/ppc/kernel/mk_defs.c
View file @ 2472788a
......@@ -42,19 +42,13 @@
int
main(void)
{
DEFINE(THREAD_SIZE, THREAD_SIZE);
DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
DEFINE(STATE, offsetof(struct task_struct, state));
DEFINE(THREAD, offsetof(struct task_struct, thread));
DEFINE(THREAD_INFO, offsetof(struct task_struct, thread_info));
DEFINE(MM, offsetof(struct task_struct, mm));
DEFINE(ACTIVE_MM, offsetof(struct task_struct, active_mm));
DEFINE(TASK_STRUCT_SIZE, sizeof(struct task_struct));
DEFINE(KSP, offsetof(struct thread_struct, ksp));
DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
DEFINE(LAST_SYSCALL, offsetof(struct thread_struct, last_syscall));
DEFINE(PT_REGS, offsetof(struct thread_struct, regs));
DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
DEFINE(THREAD_FPEXC_MODE, offsetof(struct thread_struct, fpexc_mode));
DEFINE(THREAD_FPR0, offsetof(struct thread_struct, fpr[0]));
DEFINE(THREAD_FPSCR, offsetof(struct thread_struct, fpscr));
......
arch/ppc/kernel/process.c
View file @ 2472788a
......@@ -59,6 +59,12 @@ static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS;
struct mm_struct init_mm = INIT_MM(init_mm);
/* this is 8kB-aligned so we can get to the thread_info struct
at the base of it from the stack pointer with 1 integer instruction. */
union thread_union init_thread_union
__attribute__((__section__(".data.init_task"))) =
{ INIT_THREAD_INFO(init_task) };
/* initial task structure */
struct task_struct init_task = INIT_TASK(init_task);
......@@ -191,9 +197,7 @@ dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpregs)
return 1;
}
void
_switch_to(struct task_struct *prev, struct task_struct *new,
struct task_struct **last)
void switch_to(struct task_struct *prev, struct task_struct *new)
{
struct thread_struct *new_thread, *old_thread;
unsigned long s;
......@@ -215,7 +219,7 @@ _switch_to(struct task_struct *prev, struct task_struct *new,
* every switch, just a save.
* -- Cort
*/
if ( prev->thread.regs && (prev->thread.regs->msr & MSR_FP) )
if (prev->thread.regs && (prev->thread.regs->msr & MSR_FP))
giveup_fpu(prev);
#ifdef CONFIG_ALTIVEC
/*
......@@ -234,8 +238,6 @@ _switch_to(struct task_struct *prev, struct task_struct *new,
#endif /* CONFIG_ALTIVEC */
#endif /* CONFIG_SMP */
current_set[smp_processor_id()] = new;
/* Avoid the trap. On smp this this never happens since
* we don't set last_task_used_altivec -- Cort
*/
......@@ -243,7 +245,7 @@ _switch_to(struct task_struct *prev, struct task_struct *new,
new->thread.regs->msr |= MSR_VEC;
new_thread = &new->thread;
old_thread = &current->thread;
*last = _switch(old_thread, new_thread);
_switch(old_thread, new_thread);
__restore_flags(s);
}
......@@ -276,7 +278,7 @@ void show_regs(struct pt_regs * regs)
#endif
#ifdef CONFIG_SMP
printk(" CPU: %d", current->processor);
printk(" CPU: %d", smp_processor_id());
#endif /* CONFIG_SMP */
printk("\n");
......
arch/ppc/kernel/setup.c
View file @ 2472788a
......@@ -35,7 +35,6 @@
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/pmac_feature.h>
#include <asm/thread_info.h>
#if defined CONFIG_KGDB
#include <asm/kgdb.h>
......@@ -163,7 +162,7 @@ int show_cpuinfo(struct seq_file *m, void *v)
return 0;
pvr = cpu_data[i].pvr;
lpj = cpu_data[i].loops_per_jiffy;
seq_printf(m, "processor\t: %lu\n", i);
seq_printf(m, "processor\t: %d\n", i);
#else
pvr = mfspr(PVR);
lpj = loops_per_jiffy;
......@@ -542,9 +541,6 @@ int __init ppc_init(void)
arch_initcall(ppc_init);
/* Initial thread_info struct, copied into init_task_union */
struct thread_info init_thread_values __initdata = INIT_THREAD_INFO(init_task);
/* Warning, IO base is not yet inited */
void __init setup_arch(char **cmdline_p)
{
......@@ -553,9 +549,6 @@ void __init setup_arch(char **cmdline_p)
extern char *klimit;
extern void do_init_bootmem(void);
/* initialize the thread_info for the init task */
init_thread_info = init_thread_values;
/* so udelay does something sensible, assume <= 1000 bogomips */
loops_per_jiffy = 500000000 / HZ;
......
arch/ppc/kernel/signal.c
View file @ 2472788a
......@@ -30,6 +30,7 @@
#include <linux/stddef.h>
#include <linux/elf.h>
#include <linux/tty.h>
#include <linux/binfmts.h>
#include <asm/ucontext.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
......
arch/ppc/kernel/smp.c
View file @ 2472788a
......@@ -37,6 +37,7 @@
#include <asm/smp.h>
#include <asm/residual.h>
#include <asm/time.h>
#include <asm/thread_info.h>
int smp_threads_ready;
volatile int smp_commenced;
......@@ -49,11 +50,12 @@ atomic_t ipi_sent;
spinlock_t kernel_flag __cacheline_aligned_in_smp = SPIN_LOCK_UNLOCKED;
unsigned int prof_multiplier[NR_CPUS];
unsigned int prof_counter[NR_CPUS];
cycles_t cacheflush_time;
unsigned long cache_decay_ticks;
static int max_cpus __initdata = NR_CPUS;
unsigned long cpu_online_map;
int smp_hw_index[NR_CPUS];
static struct smp_ops_t *smp_ops;
struct thread_info *secondary_ti;
/* all cpu mappings are 1-1 -- Cort */
volatile unsigned long cpu_callin_map[NR_CPUS];
......@@ -66,6 +68,8 @@ int start_secondary(void *);
extern int cpu_idle(void *unused);
void smp_call_function_interrupt(void);
void smp_message_pass(int target, int msg, unsigned long data, int wait);
static int __smp_call_function(void (*func) (void *info), void *info,
int wait, int target);
#ifdef CONFIG_PPC_ISERIES
extern void smp_iSeries_space_timers( unsigned nr );
......@@ -108,7 +112,7 @@ void smp_message_recv(int msg, struct pt_regs *regs)
smp_call_function_interrupt();
break;
case PPC_MSG_RESCHEDULE:
current->work.need_resched = 1;
set_need_resched();
break;
case PPC_MSG_INVALIDATE_TLB:
_tlbia();
......@@ -192,7 +196,7 @@ static struct call_data_struct {
* in the system.
*/
int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
int wait)
/*
* [SUMMARY] Run a function on all other CPUs.
......@@ -206,13 +210,24 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
* You must not call this function with disabled interrupts or from a
* hardware interrupt handler, you may call it from a bottom half handler.
*/
{
if (smp_num_cpus <= 1)
return 0;
return __smp_call_function(func, info, wait, MSG_ALL_BUT_SELF);
}
static int __smp_call_function(void (*func) (void *info), void *info,
int wait, int target)
{
struct call_data_struct data;
int ret = -1, cpus = smp_num_cpus-1;
int ret = -1;
int timeout;
int ncpus = 1;
if (!cpus)
return 0;
if (target == MSG_ALL_BUT_SELF)
ncpus = smp_num_cpus - 1;
else if (target == MSG_ALL)
ncpus = smp_num_cpus;
data.func = func;
data.info = info;
......@@ -224,11 +239,11 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
spin_lock_bh(&call_lock);
call_data = &data;
/* Send a message to all other CPUs and wait for them to respond */
smp_message_pass(MSG_ALL_BUT_SELF, PPC_MSG_CALL_FUNCTION, 0, 0);
smp_message_pass(target, PPC_MSG_CALL_FUNCTION, 0, 0);
/* Wait for response */
timeout = 1000000;
while (atomic_read(&data.started) != cpus) {
while (atomic_read(&data.started) != ncpus) {
if (--timeout == 0) {
printk("smp_call_function on cpu %d: other cpus not responding (%d)\n",
smp_processor_id(), atomic_read(&data.started));
......@@ -240,7 +255,7 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
if (wait) {
timeout = 1000000;
while (atomic_read(&data.finished) != cpus) {
while (atomic_read(&data.finished) != ncpus) {
if (--timeout == 0) {
printk("smp_call_function on cpu %d: other cpus not finishing (%d/%d)\n",
smp_processor_id(), atomic_read(&data.finished), atomic_read(&data.started));
......@@ -276,9 +291,28 @@ void smp_call_function_interrupt(void)
atomic_inc(&call_data->finished);
}
/*
* Task migration callback.
*/
void smp_task_migration_interrupt(void *new_task)
{
task_t *p;
p = new_task;
sched_task_migrated(p);
}
/*
* This function sends a 'task migration' IPI to another CPU.
* Must be called from syscall contexts, with interrupts *enabled*.
*/
void smp_migrate_task(int cpu, task_t *p)
{
__smp_call_function(smp_task_migration_interrupt, p, 0, cpu);
}
void __init smp_boot_cpus(void)
{
extern struct task_struct *current_set[NR_CPUS];
int i, cpu_nr;
struct task_struct *p;
......@@ -292,7 +326,6 @@ void __init smp_boot_cpus(void)
* cpu 0, the master -- Cort
*/
cpu_callin_map[0] = 1;
current->cpu = 0;
for (i = 0; i < NR_CPUS; i++) {
prof_counter[i] = 1;
......@@ -300,10 +333,9 @@ void __init smp_boot_cpus(void)
}
/*
* XXX very rough, assumes 20 bus cycles to read a cache line,
* timebase increments every 4 bus cycles, 32kB L1 data cache.
* XXX very rough.
*/
cacheflush_time = 5 * 1024;
cache_decay_ticks = HZ/100;
smp_ops = ppc_md.smp_ops;
if (smp_ops == NULL) {
......@@ -311,7 +343,7 @@ void __init smp_boot_cpus(void)
return;
}
/* Probe arch for CPUs */
/* Probe platform for CPUs */
cpu_nr = smp_ops->probe();
/*
......@@ -338,9 +370,8 @@ void __init smp_boot_cpus(void)
init_idle(p, i);
unhash_process(p);
p->cpu = i;
p->cpus_allowed = 1 << i; /* we schedule the first task manually */
current_set[i] = p;
secondary_ti = p->thread_info;
p->thread_info->cpu = i;
/*
* There was a cache flush loop here to flush the cache
......@@ -357,11 +388,10 @@ void __init smp_boot_cpus(void)
* use this value that I found through experimentation.
* -- Cort
*/
for ( c = 1000; c && !cpu_callin_map[i] ; c-- )
for (c = 1000; c && !cpu_callin_map[i]; c--)
udelay(100);
if ( cpu_callin_map[i] )
{
if (cpu_callin_map[i]) {
char buf[32];
sprintf(buf, "found cpu %d", i);
if (ppc_md.progress) ppc_md.progress(buf, 0x350+i);
......@@ -488,7 +518,7 @@ void __init smp_commence(void)
void __init smp_callin(void)
{
int cpu = current->processor;
int cpu = smp_processor_id();
smp_store_cpu_info(cpu);
set_dec(tb_ticks_per_jiffy);
......@@ -505,7 +535,7 @@ void __init smp_callin(void)
*/
cpu_online_map |= 1UL << smp_processor_id();
while(!smp_commenced)
while (!smp_commenced)
barrier();
/* see smp_commence for more info */
......
arch/ppc/lib/locks.c
View file @ 2472788a
......@@ -48,7 +48,7 @@ static unsigned long __spin_trylock(volatile unsigned long *lock)
return ret;
}
void _spin_lock(spinlock_t *lock)
void _raw_spin_lock(spinlock_t *lock)
{
int cpu = smp_processor_id();
unsigned int stuck = INIT_STUCK;
......@@ -69,7 +69,7 @@ void _spin_lock(spinlock_t *lock)
lock->owner_cpu = cpu;
}
int spin_trylock(spinlock_t *lock)
int _raw_spin_trylock(spinlock_t *lock)
{
if (__spin_trylock(&lock->lock))
return 0;
......@@ -78,7 +78,7 @@ int spin_trylock(spinlock_t *lock)
return 1;
}
void _spin_unlock(spinlock_t *lp)
void _raw_spin_unlock(spinlock_t *lp)
{
if ( !lp->lock )
printk("_spin_unlock(%p): no lock cpu %d curr PC %p %s/%d\n",
......@@ -99,7 +99,7 @@ void _spin_unlock(spinlock_t *lp)
* with the high bit (sign) being the "write" bit.
* -- Cort
*/
void _read_lock(rwlock_t *rw)
void _raw_read_lock(rwlock_t *rw)
{
unsigned long stuck = INIT_STUCK;
int cpu = smp_processor_id();
......@@ -126,7 +126,7 @@ void _read_lock(rwlock_t *rw)
wmb();
}
void _read_unlock(rwlock_t *rw)
void _raw_read_unlock(rwlock_t *rw)
{
if ( rw->lock == 0 )
printk("_read_unlock(): %s/%d (nip %08lX) lock %lx\n",
......@@ -136,7 +136,7 @@ void _read_unlock(rwlock_t *rw)
atomic_dec((atomic_t *) &(rw)->lock);
}
void _write_lock(rwlock_t *rw)
void _raw_write_lock(rwlock_t *rw)
{
unsigned long stuck = INIT_STUCK;
int cpu = smp_processor_id();
......@@ -176,7 +176,7 @@ void _write_lock(rwlock_t *rw)
wmb();
}
void _write_unlock(rwlock_t *rw)
void _raw_write_unlock(rwlock_t *rw)
{
if ( !(rw->lock & (1<<31)) )
printk("_write_lock(): %s/%d (nip %08lX) lock %lx\n",
......
arch/ppc/mm/hashtable.S
View file @ 2472788a
......@@ -32,6 +32,7 @@
#include <asm/pgtable.h>
#include <asm/cputable.h>
#include <asm/ppc_asm.h>
#include <asm/thread_info.h>
#include <kernel/ppc_defs.h>
#ifdef CONFIG_SMP
......@@ -63,9 +64,7 @@ hash_page:
#ifdef CONFIG_SMP
addis r2,r7,hash_table_lock@h
ori r2,r2,hash_table_lock@l
mfspr r5,SPRG3
lwz r0,CPU-THREAD(r5)
oris r0,r0,0x0fff
lis r0,0x0fff
b 10f
11: lwz r6,0(r2)
cmpwi 0,r6,0
......@@ -215,8 +214,9 @@ _GLOBAL(add_hash_page)
#ifdef CONFIG_SMP
lis r9,hash_table_lock@h
ori r9,r9,hash_table_lock@l
lwz r8,CPU(r2)
oris r8,r8,10
rlwinm r8,r1,0,0,18
lwz r8,TI_CPU(r8)
oris r8,r8,12
10: lwarx r7,0,r9
cmpi 0,r7,0
bne- 11f
......@@ -511,7 +511,8 @@ _GLOBAL(flush_hash_page)
#ifdef CONFIG_SMP
lis r9,hash_table_lock@h
ori r9,r9,hash_table_lock@l
lwz r8,CPU(r2)
rlwinm r8,r1,0,0,18
lwz r8,TI_CPU(r8)
oris r8,r8,9
10: lwarx r7,0,r9
cmpi 0,r7,0
......
arch/ppc/mm/init.c
View file @ 2472788a
......@@ -135,7 +135,6 @@ void show_mem(void)
{
int i,free = 0,total = 0,reserved = 0;
int shared = 0, cached = 0;
struct task_struct *p;
int highmem = 0;
printk("Mem-info:\n");
......@@ -153,7 +152,7 @@ void show_mem(void)
else if (!page_count(mem_map+i))
free++;
else
shared += atomic_read(&mem_map[i].count) - 1;
shared += page_count(mem_map+i) - 1;
}
printk("%d pages of RAM\n",total);
printk("%d pages of HIGHMEM\n", highmem);
......@@ -163,49 +162,6 @@ void show_mem(void)
printk("%d pages swap cached\n",cached);
printk("%d pages in page table cache\n",(int)pgtable_cache_size);
show_buffers();
printk("%-8s %3s %8s %8s %8s %9s %8s", "Process", "Pid",
"Ctx", "Ctx<<4", "Last Sys", "pc", "task");
#ifdef CONFIG_SMP
printk(" %3s", "CPU");
#endif /* CONFIG_SMP */
printk("\n");
for_each_task(p)
{
printk("%-8.8s %3d %8ld %8ld %8ld %c%08lx %08lx ",
p->comm,p->pid,
(p->mm)?p->mm->context:0,
(p->mm)?(p->mm->context<<4):0,
p->thread.last_syscall,
(p->thread.regs)?user_mode(p->thread.regs) ? 'u' : 'k' : '?',
(p->thread.regs)?p->thread.regs->nip:0,
(ulong)p);
{
int iscur = 0;
#ifdef CONFIG_SMP
printk("%3d ", p->processor);
if ( (p->processor != NO_PROC_ID) &&
(p == current_set[p->processor]) )
{
iscur = 1;
printk("current");
}
#else
if ( p == current )
{
iscur = 1;
printk("current");
}
if ( p == last_task_used_math )
{
if ( iscur )
printk(",");
printk("last math");
}
#endif /* CONFIG_SMP */
printk("\n");
}
}
}
void si_meminfo(struct sysinfo *val)
......
arch/ppc/vmlinux.lds
View file @ 2472788a
......@@ -49,8 +49,9 @@ SECTIONS
.fini : { *(.fini) } =0
.ctors : { *(.ctors) }
.dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
. = ALIGN(4096);
.data :
{
*(.data)
......@@ -80,6 +81,9 @@ SECTIONS
. = ALIGN(32);
.data.cacheline_aligned : { *(.data.cacheline_aligned) }
. = ALIGN(8192);
.data.init_task : { *(.data.init_task) }
. = ALIGN(4096);
__init_begin = .;
.text.init : { *(.text.init) }
......
include/asm-ppc/bitops.h
View file @ 2472788a
......@@ -10,6 +10,7 @@
#define _PPC_BITOPS_H
#include <linux/config.h>
#include <linux/compiler.h>
#include <asm/byteorder.h>
#include <asm/atomic.h>
......@@ -272,6 +273,79 @@ static __inline__ int ffs(int x)
#endif /* __KERNEL__ */
/*
* Find the first bit set in a 140-bit bitmap.
* The first 100 bits are unlikely to be set.
*/
static inline int sched_find_first_bit(unsigned long *b)
{
if (unlikely(b[0]))
return __ffs(b[0]);
if (unlikely(b[1]))
return __ffs(b[1]) + 32;
if (unlikely(b[2]))
return __ffs(b[2]) + 64;
if (b[3])
return __ffs(b[3]) + 96;
return __ffs(b[4]) + 128;
}
/**
* find_next_bit - find the next set bit in a memory region
* @addr: The address to base the search on
* @offset: The bitnumber to start searching at
* @size: The maximum size to search
*/
static __inline__ unsigned long find_next_bit(void *addr,
unsigned long size, unsigned long offset)
{
unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
unsigned int result = offset & ~31UL;
unsigned int tmp;
if (offset >= size)
return size;
size -= result;
offset &= 31UL;
if (offset) {
tmp = *p++;
tmp &= ~0UL << offset;
if (size < 32)
goto found_first;
if (tmp)
goto found_middle;
size -= 32;
result += 32;
}
while (size >= 32) {
if ((tmp = *p++) != 0)
goto found_middle;
result += 32;
size -= 32;
}
if (!size)
return result;
tmp = *p;
found_first:
tmp &= ~0UL >> (32 - size);
if (tmp == 0UL) /* Are any bits set? */
return result + size; /* Nope. */
found_middle:
return result + __ffs(tmp);
}
/**
* find_first_bit - find the first set bit in a memory region
* @addr: The address to start the search at
* @size: The maximum size to search
*
* Returns the bit-number of the first set bit, not the number of the byte
* containing a bit.
*/
#define find_first_bit(addr, size) \
find_next_bit((addr), (size), 0)
/*
* This implementation of find_{first,next}_zero_bit was stolen from
* Linus' asm-alpha/bitops.h.
......
include/asm-ppc/mmu_context.h
View file @ 2472788a
......@@ -10,25 +10,6 @@
#include <asm/bitops.h>
#include <asm/mmu.h>
#if MAX_RT_PRIO != 128 || MAX_PRIO != 168
# error update this function.
#endif
static inline int sched_find_first_bit(unsigned long *b)
{
if (unlikely(b[0]))
return __ffs(b[0]);
if (unlikely(b[1]))
return __ffs(b[1]) + 32;
if (unlikely(b[2]))
return __ffs(b[2]) + 64;
if (unlikely(b[3]))
return __ffs(b[3]) + 96;
if (b[4])
return __ffs(b[4]) + 128;
return __ffs(b[5]) + 32 + 128;
}
/*
* On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs
* (virtual segment identifiers) for each context. Although the
......
include/asm-ppc/processor.h
View file @ 2472788a
......@@ -714,10 +714,8 @@ struct thread_struct {
/*
* Return saved PC of a blocked thread. For now, this is the "user" PC
*/
static inline unsigned long thread_saved_pc(struct thread_struct *t)
{
return (t->regs) ? t->regs->nip : 0;
}
#define thread_saved_pc(tsk) \
((tsk)->thread.regs? (tsk)->thread.regs->nip: 0)
#define copy_segments(tsk, mm) do { } while (0)
#define release_segments(mm) do { } while (0)
......
include/asm-ppc/smp.h
View file @ 2472788a
......@@ -28,10 +28,10 @@ struct cpuinfo_PPC {
unsigned long pgtable_cache_sz;
};
extern struct cpuinfo_PPC cpu_data[NR_CPUS];
extern struct cpuinfo_PPC cpu_data[];
extern unsigned long cpu_online_map;
extern unsigned long smp_proc_in_lock[NR_CPUS];
extern volatile unsigned long cpu_callin_map[NR_CPUS];
extern unsigned long smp_proc_in_lock[];
extern volatile unsigned long cpu_callin_map[];
extern int smp_tb_synchronized;
extern void smp_store_cpu_info(int id);
......@@ -50,7 +50,7 @@ extern void smp_local_timer_interrupt(struct pt_regs *);
#define smp_processor_id() (current_thread_info()->cpu)
extern int smp_hw_index[NR_CPUS];
extern int smp_hw_index[];
#define hard_smp_processor_id() (smp_hw_index[smp_processor_id()])
struct klock_info_struct {
......
include/asm-ppc/spinlock.h
View file @ 2472788a
......@@ -36,7 +36,7 @@ typedef struct {
#ifndef SPINLOCK_DEBUG
static inline void spin_lock(spinlock_t *lock)
static inline void _raw_spin_lock(spinlock_t *lock)
{
unsigned long tmp;
......@@ -59,24 +59,21 @@ static inline void spin_lock(spinlock_t *lock)
: "cr0", "memory");
}
static inline void spin_unlock(spinlock_t *lock)
static inline void _raw_spin_unlock(spinlock_t *lock)
{
__asm__ __volatile__("eieio # spin_unlock": : :"memory");
lock->lock = 0;
}
#define spin_trylock(lock) (!test_and_set_bit(0,(lock)))
#define _raw_spin_trylock(lock) (!test_and_set_bit(0,(lock)))
#else
extern void _spin_lock(spinlock_t *lock);
extern void _spin_unlock(spinlock_t *lock);
extern int spin_trylock(spinlock_t *lock);
extern void _raw_spin_lock(spinlock_t *lock);
extern void _raw_spin_unlock(spinlock_t *lock);
extern int _raw_spin_trylock(spinlock_t *lock);
extern unsigned long __spin_trylock(volatile unsigned long *lock);
#define spin_lock(lp) _spin_lock(lp)
#define spin_unlock(lp) _spin_unlock(lp)
#endif
/*
......@@ -107,7 +104,7 @@ typedef struct {
#ifndef SPINLOCK_DEBUG
static __inline__ void read_lock(rwlock_t *rw)
static __inline__ void _raw_read_lock(rwlock_t *rw)
{
unsigned int tmp;
......@@ -130,7 +127,7 @@ static __inline__ void read_lock(rwlock_t *rw)
: "cr0", "memory");
}
static __inline__ void read_unlock(rwlock_t *rw)
static __inline__ void _raw_read_unlock(rwlock_t *rw)
{
unsigned int tmp;
......@@ -146,7 +143,7 @@ static __inline__ void read_unlock(rwlock_t *rw)
: "cr0", "memory");
}
static __inline__ void write_lock(rwlock_t *rw)
static __inline__ void _raw_write_lock(rwlock_t *rw)
{
unsigned int tmp;
......@@ -169,7 +166,7 @@ static __inline__ void write_lock(rwlock_t *rw)
: "cr0", "memory");
}
static __inline__ void write_unlock(rwlock_t *rw)
static __inline__ void _raw_write_unlock(rwlock_t *rw)
{
__asm__ __volatile__("eieio # write_unlock": : :"memory");
rw->lock = 0;
......@@ -177,15 +174,10 @@ static __inline__ void write_unlock(rwlock_t *rw)
#else
extern void _read_lock(rwlock_t *rw);
extern void _read_unlock(rwlock_t *rw);
extern void _write_lock(rwlock_t *rw);
extern void _write_unlock(rwlock_t *rw);
#define read_lock(rw) _read_lock(rw)
#define write_lock(rw) _write_lock(rw)
#define write_unlock(rw) _write_unlock(rw)
#define read_unlock(rw) _read_unlock(rw)
extern void _raw_read_lock(rwlock_t *rw);
extern void _raw_read_unlock(rwlock_t *rw);
extern void _raw_write_lock(rwlock_t *rw);
extern void _raw_write_unlock(rwlock_t *rw);
#endif
......
include/asm-ppc/system.h
View file @ 2472788a
......@@ -81,9 +81,7 @@ extern void note_scsi_host(struct device_node *, void *);
struct task_struct;
#define prepare_to_switch() do { } while(0)
#define switch_to(prev,next,last) _switch_to((prev),(next),&(last))
extern void _switch_to(struct task_struct *, struct task_struct *,
struct task_struct **);
extern void switch_to(struct task_struct *, struct task_struct *);
struct thread_struct;
extern struct task_struct *_switch(struct thread_struct *prev,
......
include/asm-ppc/thread_info.h
View file @ 2472788a
......@@ -10,11 +10,12 @@
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
#include <asm/processor.h>
#ifndef __ASSEMBLY__
/*
* low level task data.
* If you change this, change the TI_* offsets below to match.
*/
struct thread_info {
struct task_struct *task; /* main task structure */
......@@ -51,9 +52,21 @@ static inline struct thread_info *current_thread_info(void)
#define free_thread_info(ti) free_pages((unsigned long) (ti), 1)
#define get_thread_info(ti) get_task_struct((ti)->task)
#define put_thread_info(ti) put_task_struct((ti)->task)
#define THREAD_SIZE (2*PAGE_SIZE)
#endif /* __ASSEMBLY__ */
/*
* Size of kernel stack for each process.
*/
#define THREAD_SIZE 8192 /* 2 pages */
/*
* Offsets in thread_info structure, used in assembly code
*/
#define TI_TASK 0
#define TI_EXECDOMAIN 4
#define TI_FLAGS 8
#define TI_CPU 12
/*
* thread information flag bit numbers
*/
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7