Commit 25329671 authored by Jürgen Schindele's avatar Jürgen Schindele Committed by Russell King

[ARM] 5251/1: remove old LED support for Trizeps4 SOM

Remove the old led support in arch/arm/mach-pxa/leds...
for TRIZEPS4 SOM. It is / will be replaced by generic
led driver drivers/leds/...
Signed-off-by: default avatarJürgen Schindele <linux@schindele.name>
Acked-by: default avatarEric Miao <eric.miao@marvell.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 642aa663
...@@ -840,7 +840,7 @@ config LEDS ...@@ -840,7 +840,7 @@ config LEDS
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
ARCH_AT91 || MACH_TRIZEPS4 || ARCH_DAVINCI || \ ARCH_AT91 || ARCH_DAVINCI || \
ARCH_KS8695 || MACH_RD88F5182 ARCH_KS8695 || MACH_RD88F5182
help help
If you say Y here, the LEDs on your machine will be used If you say Y here, the LEDs on your machine will be used
......
...@@ -61,7 +61,6 @@ led-y := leds.o ...@@ -61,7 +61,6 @@ led-y := leds.o
led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o
led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o
obj-$(CONFIG_LEDS) += $(led-y) obj-$(CONFIG_LEDS) += $(led-y)
......
/*
* linux/arch/arm/mach-pxa/leds-trizeps4.c
*
* Author: Jürgen Schindele
* Created: 20 02, 2006
* Copyright: Jürgen Schindele
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/types.h>
#include <asm/leds.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-gpio.h>
#include <mach/trizeps4.h>
#include "leds.h"
#define LED_STATE_ENABLED 1
#define LED_STATE_CLAIMED 2
#define SYS_BUSY 0x01
#define HEARTBEAT 0x02
#define BLINK 0x04
static unsigned int led_state;
static unsigned int hw_led_state;
void trizeps4_leds_event(led_event_t evt)
{
unsigned long flags;
local_irq_save(flags);
switch (evt) {
case led_start:
hw_led_state = 0;
pxa_gpio_mode( GPIO_SYS_BUSY_LED | GPIO_OUT); /* LED1 */
pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT); /* LED2 */
led_state = LED_STATE_ENABLED;
break;
case led_stop:
led_state &= ~LED_STATE_ENABLED;
break;
case led_claim:
led_state |= LED_STATE_CLAIMED;
hw_led_state = 0;
break;
case led_release:
led_state &= ~LED_STATE_CLAIMED;
hw_led_state = 0;
break;
#ifdef CONFIG_LEDS_TIMER
case led_timer:
hw_led_state ^= HEARTBEAT;
break;
#endif
#ifdef CONFIG_LEDS_CPU
case led_idle_start:
hw_led_state &= ~SYS_BUSY;
break;
case led_idle_end:
hw_led_state |= SYS_BUSY;
break;
#endif
case led_halted:
break;
case led_green_on:
hw_led_state |= BLINK;
break;
case led_green_off:
hw_led_state &= ~BLINK;
break;
case led_amber_on:
break;
case led_amber_off:
break;
case led_red_on:
break;
case led_red_off:
break;
default:
break;
}
if (led_state & LED_STATE_ENABLED) {
switch (hw_led_state) {
case 0:
GPSR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
break;
case 1:
GPCR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
break;
case 2:
GPSR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
break;
case 3:
GPCR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
break;
}
}
else {
/* turn all off */
GPSR(GPIO_SYS_BUSY_LED) |= GPIO_bit(GPIO_SYS_BUSY_LED);
GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
}
local_irq_restore(flags);
}
...@@ -24,8 +24,6 @@ pxa_leds_init(void) ...@@ -24,8 +24,6 @@ pxa_leds_init(void)
leds_event = mainstone_leds_event; leds_event = mainstone_leds_event;
if (machine_is_pxa_idp()) if (machine_is_pxa_idp())
leds_event = idp_leds_event; leds_event = idp_leds_event;
if (machine_is_trizeps4())
leds_event = trizeps4_leds_event;
leds_event(led_start); leds_event(led_start);
return 0; return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment