Commit 2533fe7f authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

Merge kroah.com:/home/greg/linux/BK/bleed-2.5

into kroah.com:/home/greg/linux/BK/i2c-new_drivers-2.6
parents 0e70f996 3c5e4412
Revision 3, 2003-10-04
Jean Delvare <khali@linux-fr.org>
Greg KH <greg@kroah.com>
This is a guide on how to convert I2C chip drivers from Linux 2.4 to
Linux 2.6. I have been using existing drivers (lm75, lm78) as examples.
Then I converted a driver myself (lm83) and updated this document.
There are two sets of points below. The first set concerns technical
changes. The second set concerns coding policy. Both are mandatory.
Although reading this guide will help you porting drivers, I suggest
you keep an eye on an already ported driver while porting your own
driver. This will help you a lot understanding what this guide
exactly means. Choose the chip driver that is the more similar to
yours for best results.
Technical changes:
* [Includes] Get rid of "version.h". Replace <linux/i2c-proc.h> with
<linux/i2c-sensor.h>. Includes typically look like that:
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h> /* if you need VRM support */
#include <asm/io.h> /* if you have I/O operations */
Some extra headers may be required for a given driver.
* [Addresses] SENSORS_I2C_END becomes I2C_CLIENT_END, SENSORS_ISA_END
becomes I2C_CLIENT_ISA_END.
* [Client data] Get rid of sysctl_id. Try using standard names for
register values (for example, temp_os becomes temp_max). You're
still relatively free here, but you *have* to follow the standard
names for sysfs files (see the Sysctl section below).
* [Function prototypes] The detect functions loses its flags
parameter. Sysctl (e.g. lm75_temp) and miscellaneous (e.g.
swap_bytes) functions are off the list of prototypes. This
usually leaves five prototypes:
static int lm75_attach_adapter(struct i2c_adapter *adapter);
static int lm75_detect(struct i2c_adapter *adapter, int address,
int kind);
static void lm75_init_client(struct i2c_client *client);
static int lm75_detach_client(struct i2c_client *client);
static void lm75_update_client(struct i2c_client *client);
* [Sysctl] All sysctl stuff is of course gone (defines, ctl_table
and functions). Instead, right after the static id definition
line, you have to define show and set functions for each sysfs
file. Only define set for writable values. Take a look at an
existing 2.6 driver for details (lm78 for example). Don't forget
to define the attributes for each file (this is that step that
links callback functions). Use the file names specified in
Documentation/i2c/sysfs-interface for the individual files. Also
convert the units these files read and write to the specified ones.
If you need to add a new type of file, please discuss it on the
sensors mailing list <sensors@stimpy.netroedge.com> by providing a
patch to the Documentation/i2c/sysfs-interface file.
* [Attach] For I2C drivers, the attach function should make sure
that the adapter's class has I2C_ADAP_CLASS_SMBUS, using the
following construct:
if (!(adapter->class & I2C_ADAP_CLASS_SMBUS))
return 0;
ISA-only drivers of course don't need this.
* [Detect] As mentioned earlier, the flags parameter is gone.
The type_name and client_name strings are replaced by a single
name string, which will be filled with a lowercase, short string
(typically the driver name, e.g. "lm75"). The errorN labels are
reduced to the number needed. If that number is 2 (i2c-only
drivers), it is advised that the labels are named exit and
exit_free. For i2c+isa drivers, labels should be named ERROR0,
ERROR1 and ERROR2. Don't forget to properly set err before
jumping to error labels. By the way, labels should be
left-aligned.
Use memset to fill the client and data area with 0x00.
Use i2c_set_clientdata to set the client data (as opposed to
a direct access to client->data).
Use strlcpy instead of strcpy to copy the client name.
Replace the sysctl directory registration by calls to
device_create_file. Move the driver initialization before any
sysfs file creation.
* [Detach] Get rid of data, remove the call to
i2c_deregister_entry.
* [Update] Don't access client->data directly, use
i2c_get_clientdata(client) instead.
* [Interface] Init function should not print anything. Make sure
there is a MODULE_LICENSE() line.
Coding policy:
* [Copyright] Use (C), not (c), for copyright.
* [Debug/log] Get rid of #ifdef DEBUG/#endif constructs whenever you
can. Calls to printk/pr_debug for debugging purposes are replaced
by calls to dev_dbg. Here is an example on how to call it (taken
from lm75_detect):
dev_dbg(&adapter->dev,
"lm75_detect called for an ISA bus adapter?!?\n");
Replace other printk calls with the dev_info, dev_err or dev_warn
function, as appropriate.
* [Constants] Constants defines (registers, conversions, initial
values) should be aligned. This greatly improves readability.
Same goes for variables declarations. Alignments are achieved by the
means of tabs, not spaces. Remember that tabs are set to 8 in the
Linux kernel code.
* [Structure definition] The name field should be standardized. All
lowercase and as simple as the driver name itself (e.g. "lm75").
* [Layout] Avoid extra empty lines between comments and what they
comment. Respect the coding style (see Documentation/CodingStyle),
in particular when it comes to placing curly braces.
...@@ -68,9 +68,7 @@ curr_max[1-n] Current max value ...@@ -68,9 +68,7 @@ curr_max[1-n] Current max value
Fixed point XXXXX, divide by 1000 to get Amps. Fixed point XXXXX, divide by 1000 to get Amps.
Read/Write. Read/Write.
curr_min[1-n] Current min or hysteresis value. curr_min[1-n] Current min value.
Preferably a hysteresis value, reported as a absolute
current, NOT a delta from the max value.
Fixed point XXXXX, divide by 1000 to get Amps. Fixed point XXXXX, divide by 1000 to get Amps.
Read/Write. Read/Write.
...@@ -144,25 +142,38 @@ sensor[1-3] Sensor type selection. ...@@ -144,25 +142,38 @@ sensor[1-3] Sensor type selection.
Integers 1,2,3, or thermistor Beta value (3435) Integers 1,2,3, or thermistor Beta value (3435)
Read/Write. Read/Write.
temp_max[1-3] Temperature max value. temp_max[1-4] Temperature max value.
Fixed point value in form XXXXX and should be divided by Fixed point value in form XXXXX and should be divided by
1000 to get degrees Celsius. 1000 to get degrees Celsius.
Read/Write value. Read/Write value.
temp_min[1-3] Temperature min or hysteresis value. temp_min[1-3] Temperature min value.
Fixed point value in form XXXXX and should be divided by Fixed point value in form XXXXX and should be divided by
1000 to get degrees Celsius. This is preferably a 1000 to get degrees Celsius.
hysteresis value, reported as a absolute temperature,
NOT a delta from the max value.
Read/Write value. Read/Write value.
temp_input[1-3] Temperature input value. temp_hyst[1-3] Temperature hysteresis value.
Fixed point value in form XXXXX and should be divided by
1000 to get degrees Celsius. Must be reported as an
absolute temperature, NOT a delta from the max value.
Read/Write value.
temp_input[1-4] Temperature input value.
Fixed point value in form XXXXX and should be divided by
1000 to get degrees Celsius.
Read only value. Read only value.
temp_crit Temperature critical value, typically greater than all
temp_max values.
Fixed point value in form XXXXX and should be divided by
1000 to get degrees Celsius.
Common to all temperature channels.
Read/Write value.
If there are multiple temperature sensors, temp_*1 is If there are multiple temperature sensors, temp_*1 is
generally the sensor inside the chip itself, generally generally the sensor inside the chip itself, generally
reported as "motherboard temperature". temp_*2 and reported as "motherboard temperature". temp_*2 to
temp_*3 are generally sensors external to the chip temp_*4 are generally sensors external to the chip
itself, for example the thermal diode inside the CPU or itself, for example the thermal diode inside the CPU or
a thermistor nearby. a thermistor nearby.
......
...@@ -24,16 +24,14 @@ all clients from it. Remember, a driver structure contains general access ...@@ -24,16 +24,14 @@ all clients from it. Remember, a driver structure contains general access
routines, a client structure specific information like the actual I2C routines, a client structure specific information like the actual I2C
address. address.
struct i2c_driver foo_driver static struct i2c_driver foo_driver = {
{ .owner = THIS_MODULE,
/* name */ "Foo version 2.3 and later driver", .name = "Foo version 2.3 driver",
/* id */ I2C_DRIVERID_FOO, .id = I2C_DRIVERID_FOO, /* usually from i2c-id.h */
/* flags */ I2C_DF_NOTIFY, .flags = I2C_DF_NOTIFY,
/* attach_adapter */ &foo_attach_adapter, .attach_adapter = &foo_attach_adapter,
/* detach_client */ &foo_detach_client, .detach_client = &foo_detach_client,
/* command */ &foo_command, /* May be NULL */ .command = &foo_command /* may be NULL */
/* inc_use */ &foo_inc_use, /* May be NULL */
/* dec_use */ &foo_dec_use /* May be NULL */
} }
The name can be chosen freely, and may be upto 40 characters long. Please The name can be chosen freely, and may be upto 40 characters long. Please
...@@ -50,43 +48,8 @@ This is almost always what you want. ...@@ -50,43 +48,8 @@ This is almost always what you want.
All other fields are for call-back functions which will be explained All other fields are for call-back functions which will be explained
below. below.
There use to be two additional fields in this structure, inc_use et dec_use,
Module usage count for module usage count, but these fields were obsoleted and removed.
==================
If your driver can also be compiled as a module, there are moments at
which the module can not be removed from memory. For example, when you
are doing a lengthy transaction, or when you create a /proc directory,
and some process has entered that directory (this last case is the
main reason why these call-backs were introduced).
To increase or decrease the module usage count, you can use the
MOD_{INC,DEC}_USE_COUNT macros. They must be called from the module
which needs to get its usage count changed; that is why each driver
module has to implement its own callback.
void foo_inc_use (struct i2c_client *client)
{
#ifdef MODULE
MOD_INC_USE_COUNT;
#endif
}
void foo_dec_use (struct i2c_client *client)
{
#ifdef MODULE
MOD_DEC_USE_COUNT;
#endif
}
Do not call these call-back functions directly; instead, use one of the
following functions defined in i2c.h:
void i2c_inc_use_client(struct i2c_client *);
void i2c_dec_use_client(struct i2c_client *);
You should *not* increase the module count just because a device is
detected and a client created. This would make it impossible to remove
an adapter driver!
Extra client data Extra client data
......
...@@ -18,10 +18,8 @@ ...@@ -18,10 +18,8 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
/* ------------------------------------------------------------------------- */ /* ------------------------------------------------------------------------- */
/* With some changes from Kysti Mlkki <kmalkki@cc.hut.fi> and even /* With some changes from Frodo Looijaard <frodol@dds.nl>, Kysti Mlkki
Frodo Looijaard <frodol@dds.nl> */ <kmalkki@cc.hut.fi> and Jean Delvare <khali@linux-fr.org> */
/* $Id: i2c-algo-bit.c,v 1.44 2003/01/21 08:08:16 kmalkki Exp $ */
/* #define DEBUG 1 */ /* #define DEBUG 1 */
...@@ -87,8 +85,10 @@ static inline int sclhi(struct i2c_algo_bit_data *adap) ...@@ -87,8 +85,10 @@ static inline int sclhi(struct i2c_algo_bit_data *adap)
setscl(adap,1); setscl(adap,1);
/* Not all adapters have scl sense line... */ /* Not all adapters have scl sense line... */
if (adap->getscl == NULL ) if (adap->getscl == NULL ) {
udelay(adap->udelay);
return 0; return 0;
}
start=jiffies; start=jiffies;
while (! getscl(adap) ) { while (! getscl(adap) ) {
...@@ -222,68 +222,72 @@ static int i2c_inb(struct i2c_adapter *i2c_adap) ...@@ -222,68 +222,72 @@ static int i2c_inb(struct i2c_adapter *i2c_adap)
*/ */
static int test_bus(struct i2c_algo_bit_data *adap, char* name) { static int test_bus(struct i2c_algo_bit_data *adap, char* name) {
int scl,sda; int scl,sda;
if (adap->getscl==NULL)
printk(KERN_INFO "i2c-algo-bit.o: Testing SDA only, "
"SCL is not readable.\n");
sda=getsda(adap); sda=getsda(adap);
if (adap->getscl==NULL) { scl=(adap->getscl==NULL?1:getscl(adap));
printk(KERN_WARNING "i2c-algo-bit.o: Warning: Adapter can't read from clock line - skipping test.\n"); printk(KERN_DEBUG "i2c-algo-bit.o: (0) scl=%d, sda=%d\n",scl,sda);
return 0;
}
scl=getscl(adap);
printk(KERN_INFO "i2c-algo-bit.o: Adapter: %s scl: %d sda: %d -- testing...\n",
name,getscl(adap),getsda(adap));
if (!scl || !sda ) { if (!scl || !sda ) {
printk(KERN_INFO " i2c-algo-bit.o: %s seems to be busy.\n",name); printk(KERN_WARNING "i2c-algo-bit.o: %s seems to be busy.\n", name);
goto bailout; goto bailout;
} }
sdalo(adap); sdalo(adap);
printk(KERN_DEBUG "i2c-algo-bit.o:1 scl: %d sda: %d \n",getscl(adap), sda=getsda(adap);
getsda(adap)); scl=(adap->getscl==NULL?1:getscl(adap));
if ( 0 != getsda(adap) ) { printk(KERN_DEBUG "i2c-algo-bit.o: (1) scl=%d, sda=%d\n",scl,sda);
printk(KERN_WARNING "i2c-algo-bit.o: %s SDA stuck high!\n",name); if ( 0 != sda ) {
sdahi(adap); printk(KERN_WARNING "i2c-algo-bit.o: SDA stuck high!\n");
goto bailout; goto bailout;
} }
if ( 0 == getscl(adap) ) { if ( 0 == scl ) {
printk(KERN_WARNING "i2c-algo-bit.o: %s SCL unexpected low while pulling SDA low!\n", printk(KERN_WARNING "i2c-algo-bit.o: SCL unexpected low "
name); "while pulling SDA low!\n");
goto bailout; goto bailout;
} }
sdahi(adap); sdahi(adap);
printk(KERN_DEBUG "i2c-algo-bit.o:2 scl: %d sda: %d \n",getscl(adap), sda=getsda(adap);
getsda(adap)); scl=(adap->getscl==NULL?1:getscl(adap));
if ( 0 == getsda(adap) ) { printk(KERN_DEBUG "i2c-algo-bit.o: (2) scl=%d, sda=%d\n",scl,sda);
printk(KERN_WARNING "i2c-algo-bit.o: %s SDA stuck low!\n",name); if ( 0 == sda ) {
sdahi(adap); printk(KERN_WARNING "i2c-algo-bit.o: SDA stuck low!\n");
goto bailout; goto bailout;
} }
if ( 0 == getscl(adap) ) { if ( 0 == scl ) {
printk(KERN_WARNING "i2c-algo-bit.o: %s SCL unexpected low while SDA high!\n", printk(KERN_WARNING "i2c-algo-bit.o: SCL unexpected low "
name); "while pulling SDA high!\n");
goto bailout; goto bailout;
} }
scllo(adap); scllo(adap);
printk(KERN_DEBUG "i2c-algo-bit.o:3 scl: %d sda: %d \n",getscl(adap), sda=getsda(adap);
getsda(adap)); scl=(adap->getscl==NULL?0:getscl(adap));
if ( 0 != getscl(adap) ) { printk(KERN_DEBUG "i2c-algo-bit.o: (3) scl=%d, sda=%d\n",scl,sda);
printk(KERN_WARNING "i2c-algo-bit.o: %s SCL stuck high!\n",name); if ( 0 != scl ) {
sclhi(adap); printk(KERN_WARNING "i2c-algo-bit.o: SCL stuck high!\n");
goto bailout; goto bailout;
} }
if ( 0 == getsda(adap) ) { if ( 0 == sda ) {
printk(KERN_WARNING "i2c-algo-bit.o: %s SDA unexpected low while pulling SCL low!\n", printk(KERN_WARNING "i2c-algo-bit.o: SDA unexpected low "
name); "while pulling SCL low!\n");
goto bailout; goto bailout;
} }
sclhi(adap); sclhi(adap);
printk(KERN_DEBUG "i2c-algo-bit.o:4 scl: %d sda: %d \n",getscl(adap), sda=getsda(adap);
getsda(adap)); scl=(adap->getscl==NULL?1:getscl(adap));
if ( 0 == getscl(adap) ) { printk(KERN_DEBUG "i2c-algo-bit.o: (4) scl=%d, sda=%d\n",scl,sda);
printk(KERN_WARNING "i2c-algo-bit.o: %s SCL stuck low!\n",name); if ( 0 == scl ) {
sclhi(adap); printk(KERN_WARNING "i2c-algo-bit.o: SCL stuck low!\n");
goto bailout; goto bailout;
} }
if ( 0 == getsda(adap) ) { if ( 0 == sda ) {
printk(KERN_WARNING "i2c-algo-bit.o: %s SDA unexpected low while SCL high!\n", printk(KERN_WARNING "i2c-algo-bit.o: SDA unexpected low "
name); "while pulling SCL high!\n");
goto bailout; goto bailout;
} }
printk(KERN_INFO "i2c-algo-bit.o: %s passed test.\n",name); printk(KERN_INFO "i2c-algo-bit.o: %s passed test.\n",name);
......
...@@ -161,11 +161,12 @@ config I2C_PIIX4 ...@@ -161,11 +161,12 @@ config I2C_PIIX4
help help
If you say yes to this option, support will be included for the Intel If you say yes to this option, support will be included for the Intel
PIIX4 family of mainboard I2C interfaces. Specifically, the following PIIX4 family of mainboard I2C interfaces. Specifically, the following
versions of the chipset is supported: versions of the chipset are supported:
Intel PIIX4 Intel PIIX4
Intel 440MX Intel 440MX
Serverworks OSB4 Serverworks OSB4
Serverworks CSB5 Serverworks CSB5
Serverworks CSB6
SMSC Victory66 SMSC Victory66
This driver can also be built as a module. If so, the module This driver can also be built as a module. If so, the module
...@@ -309,6 +310,7 @@ config I2C_VIAPRO ...@@ -309,6 +310,7 @@ config I2C_VIAPRO
8233 8233
8233A 8233A
8235 8235
8237
This driver can also be built as a module. If so, the module This driver can also be built as a module. If so, the module
will be called i2c-viapro. will be called i2c-viapro.
......
...@@ -22,7 +22,7 @@ ...@@ -22,7 +22,7 @@
/* /*
Supports: Supports:
Intel PIIX4, 440MX Intel PIIX4, 440MX
Serverworks OSB4, CSB5 Serverworks OSB4, CSB5, CSB6
SMSC Victory66 SMSC Victory66
Note: we assume there can only be one device, with one SMBus interface. Note: we assume there can only be one device, with one SMBus interface.
...@@ -422,6 +422,13 @@ static struct pci_device_id piix4_ids[] = { ...@@ -422,6 +422,13 @@ static struct pci_device_id piix4_ids[] = {
.subdevice = PCI_ANY_ID, .subdevice = PCI_ANY_ID,
.driver_data = 0, .driver_data = 0,
}, },
{
.vendor = PCI_VENDOR_ID_SERVERWORKS,
.device = PCI_DEVICE_ID_SERVERWORKS_CSB6,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.driver_data = 0,
},
{ {
.vendor = PCI_VENDOR_ID_INTEL, .vendor = PCI_VENDOR_ID_INTEL,
.device = PCI_DEVICE_ID_INTEL_82443MX_3, .device = PCI_DEVICE_ID_INTEL_82443MX_3,
......
/* /*
i2c-savage4.c - Part of lm_sensors, Linux kernel modules for hardware i2c-savage4.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring monitoring
Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>, Copyright (C) 1998-2003 The LM Sensors Team
Philip Edelbrock <phil@netroedge.com>, Alexander Wold <awold@bigfoot.com>
Ralph Metzler <rjkm@thp.uni-koeln.de>, and
Mark D. Studebaker <mdsxyz123@yahoo.com> Mark D. Studebaker <mdsxyz123@yahoo.com>
Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and Based on i2c-voodoo3.c.
Simon Vogl
This program is free software; you can redistribute it and/or modify This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by it under the terms of the GNU General Public License as published by
...@@ -195,9 +193,7 @@ static void __exit i2c_savage4_exit(void) ...@@ -195,9 +193,7 @@ static void __exit i2c_savage4_exit(void)
pci_unregister_driver(&savage4_driver); pci_unregister_driver(&savage4_driver);
} }
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " MODULE_AUTHOR("Alexander Wold <awold@bigfoot.com> "
"Philip Edelbrock <phil@netroedge.com>, "
"Ralph Metzler <rjkm@thp.uni-koeln.de>, "
"and Mark D. Studebaker <mdsxyz123@yahoo.com>"); "and Mark D. Studebaker <mdsxyz123@yahoo.com>");
MODULE_DESCRIPTION("Savage4 I2C/SMBus driver"); MODULE_DESCRIPTION("Savage4 I2C/SMBus driver");
MODULE_LICENSE("GPL"); MODULE_LICENSE("GPL");
......
...@@ -29,6 +29,7 @@ ...@@ -29,6 +29,7 @@
8233 8233
8233A (0x3147 and 0x3177) 8233A (0x3147 and 0x3177)
8235 8235
8237
Note: we assume there can only be one device, with one SMBus interface. Note: we assume there can only be one device, with one SMBus interface.
*/ */
...@@ -434,6 +435,13 @@ static struct pci_device_id vt596_ids[] = { ...@@ -434,6 +435,13 @@ static struct pci_device_id vt596_ids[] = {
.subdevice = PCI_ANY_ID, .subdevice = PCI_ANY_ID,
.driver_data = SMBBA3 .driver_data = SMBBA3
}, },
{
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_8237,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.driver_data = SMBBA3
},
{ {
.vendor = PCI_VENDOR_ID_VIA, .vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_8231_4, .device = PCI_DEVICE_ID_VIA_8231_4,
......
...@@ -68,6 +68,17 @@ config SENSORS_LM78 ...@@ -68,6 +68,17 @@ config SENSORS_LM78
This driver can also be built as a module. If so, the module This driver can also be built as a module. If so, the module
will be called lm78. will be called lm78.
config SENSORS_LM83
tristate "National Semiconductor LM83"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for National Semiconductor
LM83 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm83.
config SENSORS_LM85 config SENSORS_LM85
tristate "National Semiconductor LM85 and compatibles" tristate "National Semiconductor LM85 and compatibles"
depends on I2C && EXPERIMENTAL depends on I2C && EXPERIMENTAL
......
...@@ -10,5 +10,6 @@ obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o ...@@ -10,5 +10,6 @@ obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o
obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_IT87) += it87.o
obj-$(CONFIG_SENSORS_LM75) += lm75.o obj-$(CONFIG_SENSORS_LM75) += lm75.o
obj-$(CONFIG_SENSORS_LM78) += lm78.o obj-$(CONFIG_SENSORS_LM78) += lm78.o
obj-$(CONFIG_SENSORS_LM83) += lm83.o
obj-$(CONFIG_SENSORS_LM85) += lm85.o obj-$(CONFIG_SENSORS_LM85) += lm85.o
obj-$(CONFIG_SENSORS_VIA686A) += via686a.o obj-$(CONFIG_SENSORS_VIA686A) += via686a.o
...@@ -343,7 +343,6 @@ static ssize_t show_temp(struct device *dev, char *buf, int nr) ...@@ -343,7 +343,6 @@ static ssize_t show_temp(struct device *dev, char *buf, int nr)
it87_update_client(client); it87_update_client(client);
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr])*100 ); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr])*100 );
} }
/* more like overshoot temperature */
static ssize_t show_temp_max(struct device *dev, char *buf, int nr) static ssize_t show_temp_max(struct device *dev, char *buf, int nr)
{ {
struct i2c_client *client = to_i2c_client(dev); struct i2c_client *client = to_i2c_client(dev);
...@@ -351,7 +350,6 @@ static ssize_t show_temp_max(struct device *dev, char *buf, int nr) ...@@ -351,7 +350,6 @@ static ssize_t show_temp_max(struct device *dev, char *buf, int nr)
it87_update_client(client); it87_update_client(client);
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr])*100); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr])*100);
} }
/* more like hysteresis temperature */
static ssize_t show_temp_min(struct device *dev, char *buf, int nr) static ssize_t show_temp_min(struct device *dev, char *buf, int nr)
{ {
struct i2c_client *client = to_i2c_client(dev); struct i2c_client *client = to_i2c_client(dev);
...@@ -414,7 +412,6 @@ show_temp_offset(1); ...@@ -414,7 +412,6 @@ show_temp_offset(1);
show_temp_offset(2); show_temp_offset(2);
show_temp_offset(3); show_temp_offset(3);
/* more like overshoot temperature */
static ssize_t show_sensor(struct device *dev, char *buf, int nr) static ssize_t show_sensor(struct device *dev, char *buf, int nr)
{ {
struct i2c_client *client = to_i2c_client(dev); struct i2c_client *client = to_i2c_client(dev);
...@@ -563,15 +560,15 @@ show_fan_offset(1); ...@@ -563,15 +560,15 @@ show_fan_offset(1);
show_fan_offset(2); show_fan_offset(2);
show_fan_offset(3); show_fan_offset(3);
/* Alarm */ /* Alarms */
static ssize_t show_alarm(struct device *dev, char *buf) static ssize_t show_alarms(struct device *dev, char *buf)
{ {
struct i2c_client *client = to_i2c_client(dev); struct i2c_client *client = to_i2c_client(dev);
struct it87_data *data = i2c_get_clientdata(client); struct it87_data *data = i2c_get_clientdata(client);
it87_update_client(client); it87_update_client(client);
return sprintf(buf,"%d\n", ALARMS_FROM_REG(data->alarms)); return sprintf(buf,"%d\n", ALARMS_FROM_REG(data->alarms));
} }
static DEVICE_ATTR(alarm, S_IRUGO | S_IWUSR, show_alarm, NULL); static DEVICE_ATTR(alarms, S_IRUGO | S_IWUSR, show_alarms, NULL);
/* This function is called when: /* This function is called when:
* it87_driver is inserted (when this module is loaded), for each * it87_driver is inserted (when this module is loaded), for each
...@@ -751,7 +748,7 @@ int it87_detect(struct i2c_adapter *adapter, int address, int kind) ...@@ -751,7 +748,7 @@ int it87_detect(struct i2c_adapter *adapter, int address, int kind)
device_create_file(&new_client->dev, &dev_attr_fan_div1); device_create_file(&new_client->dev, &dev_attr_fan_div1);
device_create_file(&new_client->dev, &dev_attr_fan_div2); device_create_file(&new_client->dev, &dev_attr_fan_div2);
device_create_file(&new_client->dev, &dev_attr_fan_div3); device_create_file(&new_client->dev, &dev_attr_fan_div3);
device_create_file(&new_client->dev, &dev_attr_alarm); device_create_file(&new_client->dev, &dev_attr_alarms);
return 0; return 0;
......
...@@ -116,7 +116,7 @@ set(temp_max, LM75_REG_TEMP_OS); ...@@ -116,7 +116,7 @@ set(temp_max, LM75_REG_TEMP_OS);
set(temp_hyst, LM75_REG_TEMP_HYST); set(temp_hyst, LM75_REG_TEMP_HYST);
static DEVICE_ATTR(temp_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max); static DEVICE_ATTR(temp_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max);
static DEVICE_ATTR(temp_min, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst); static DEVICE_ATTR(temp_hyst, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst);
static DEVICE_ATTR(temp_input, S_IRUGO, show_temp_input, NULL); static DEVICE_ATTR(temp_input, S_IRUGO, show_temp_input, NULL);
static int lm75_attach_adapter(struct i2c_adapter *adapter) static int lm75_attach_adapter(struct i2c_adapter *adapter)
...@@ -209,7 +209,7 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) ...@@ -209,7 +209,7 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
/* Register sysfs hooks */ /* Register sysfs hooks */
device_create_file(&new_client->dev, &dev_attr_temp_max); device_create_file(&new_client->dev, &dev_attr_temp_max);
device_create_file(&new_client->dev, &dev_attr_temp_min); device_create_file(&new_client->dev, &dev_attr_temp_hyst);
device_create_file(&new_client->dev, &dev_attr_temp_input); device_create_file(&new_client->dev, &dev_attr_temp_input);
return 0; return 0;
......
...@@ -367,7 +367,7 @@ static ssize_t set_temp_hyst(struct device *dev, const char *buf, size_t count) ...@@ -367,7 +367,7 @@ static ssize_t set_temp_hyst(struct device *dev, const char *buf, size_t count)
static DEVICE_ATTR(temp_input, S_IRUGO, show_temp, NULL) static DEVICE_ATTR(temp_input, S_IRUGO, show_temp, NULL)
static DEVICE_ATTR(temp_max, S_IRUGO | S_IWUSR, static DEVICE_ATTR(temp_max, S_IRUGO | S_IWUSR,
show_temp_over, set_temp_over) show_temp_over, set_temp_over)
static DEVICE_ATTR(temp_min, S_IRUGO | S_IWUSR, static DEVICE_ATTR(temp_hyst, S_IRUGO | S_IWUSR,
show_temp_hyst, set_temp_hyst) show_temp_hyst, set_temp_hyst)
/* 3 Fans */ /* 3 Fans */
...@@ -674,8 +674,8 @@ int lm78_detect(struct i2c_adapter *adapter, int address, int kind) ...@@ -674,8 +674,8 @@ int lm78_detect(struct i2c_adapter *adapter, int address, int kind)
device_create_file(&new_client->dev, &dev_attr_in_min6); device_create_file(&new_client->dev, &dev_attr_in_min6);
device_create_file(&new_client->dev, &dev_attr_in_max6); device_create_file(&new_client->dev, &dev_attr_in_max6);
device_create_file(&new_client->dev, &dev_attr_temp_input); device_create_file(&new_client->dev, &dev_attr_temp_input);
device_create_file(&new_client->dev, &dev_attr_temp_min);
device_create_file(&new_client->dev, &dev_attr_temp_max); device_create_file(&new_client->dev, &dev_attr_temp_max);
device_create_file(&new_client->dev, &dev_attr_temp_hyst);
device_create_file(&new_client->dev, &dev_attr_fan_input1); device_create_file(&new_client->dev, &dev_attr_fan_input1);
device_create_file(&new_client->dev, &dev_attr_fan_min1); device_create_file(&new_client->dev, &dev_attr_fan_min1);
device_create_file(&new_client->dev, &dev_attr_fan_div1); device_create_file(&new_client->dev, &dev_attr_fan_div1);
......
This diff is collapsed.
...@@ -496,21 +496,19 @@ static ssize_t show_temp(struct device *dev, char *buf, int nr) { ...@@ -496,21 +496,19 @@ static ssize_t show_temp(struct device *dev, char *buf, int nr) {
via686a_update_client(client); via686a_update_client(client);
return sprintf(buf, "%ld\n", TEMP_FROM_REG10(data->temp[nr])*100 ); return sprintf(buf, "%ld\n", TEMP_FROM_REG10(data->temp[nr])*100 );
} }
/* more like overshoot temperature */ static ssize_t show_temp_over(struct device *dev, char *buf, int nr) {
static ssize_t show_temp_max(struct device *dev, char *buf, int nr) {
struct i2c_client *client = to_i2c_client(dev); struct i2c_client *client = to_i2c_client(dev);
struct via686a_data *data = i2c_get_clientdata(client); struct via686a_data *data = i2c_get_clientdata(client);
via686a_update_client(client); via686a_update_client(client);
return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_over[nr])*100); return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_over[nr])*100);
} }
/* more like hysteresis temperature */ static ssize_t show_temp_hyst(struct device *dev, char *buf, int nr) {
static ssize_t show_temp_min(struct device *dev, char *buf, int nr) {
struct i2c_client *client = to_i2c_client(dev); struct i2c_client *client = to_i2c_client(dev);
struct via686a_data *data = i2c_get_clientdata(client); struct via686a_data *data = i2c_get_clientdata(client);
via686a_update_client(client); via686a_update_client(client);
return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_hyst[nr])*100); return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_hyst[nr])*100);
} }
static ssize_t set_temp_max(struct device *dev, const char *buf, static ssize_t set_temp_over(struct device *dev, const char *buf,
size_t count, int nr) { size_t count, int nr) {
struct i2c_client *client = to_i2c_client(dev); struct i2c_client *client = to_i2c_client(dev);
struct via686a_data *data = i2c_get_clientdata(client); struct via686a_data *data = i2c_get_clientdata(client);
...@@ -519,7 +517,7 @@ static ssize_t set_temp_max(struct device *dev, const char *buf, ...@@ -519,7 +517,7 @@ static ssize_t set_temp_max(struct device *dev, const char *buf,
via686a_write_value(client, VIA686A_REG_TEMP_OVER(nr), data->temp_over[nr]); via686a_write_value(client, VIA686A_REG_TEMP_OVER(nr), data->temp_over[nr]);
return count; return count;
} }
static ssize_t set_temp_min(struct device *dev, const char *buf, static ssize_t set_temp_hyst(struct device *dev, const char *buf,
size_t count, int nr) { size_t count, int nr) {
struct i2c_client *client = to_i2c_client(dev); struct i2c_client *client = to_i2c_client(dev);
struct via686a_data *data = i2c_get_clientdata(client); struct via686a_data *data = i2c_get_clientdata(client);
...@@ -534,30 +532,30 @@ static ssize_t show_temp_##offset (struct device *dev, char *buf) \ ...@@ -534,30 +532,30 @@ static ssize_t show_temp_##offset (struct device *dev, char *buf) \
return show_temp(dev, buf, 0x##offset - 1); \ return show_temp(dev, buf, 0x##offset - 1); \
} \ } \
static ssize_t \ static ssize_t \
show_temp_##offset##_max (struct device *dev, char *buf) \ show_temp_##offset##_over (struct device *dev, char *buf) \
{ \ { \
return show_temp_max(dev, buf, 0x##offset - 1); \ return show_temp_over(dev, buf, 0x##offset - 1); \
} \ } \
static ssize_t \ static ssize_t \
show_temp_##offset##_min (struct device *dev, char *buf) \ show_temp_##offset##_hyst (struct device *dev, char *buf) \
{ \ { \
return show_temp_min(dev, buf, 0x##offset - 1); \ return show_temp_hyst(dev, buf, 0x##offset - 1); \
} \ } \
static ssize_t set_temp_##offset##_max (struct device *dev, \ static ssize_t set_temp_##offset##_over (struct device *dev, \
const char *buf, size_t count) \ const char *buf, size_t count) \
{ \ { \
return set_temp_max(dev, buf, count, 0x##offset - 1); \ return set_temp_over(dev, buf, count, 0x##offset - 1); \
} \ } \
static ssize_t set_temp_##offset##_min (struct device *dev, \ static ssize_t set_temp_##offset##_hyst (struct device *dev, \
const char *buf, size_t count) \ const char *buf, size_t count) \
{ \ { \
return set_temp_min(dev, buf, count, 0x##offset - 1); \ return set_temp_hyst(dev, buf, count, 0x##offset - 1); \
} \ } \
static DEVICE_ATTR(temp_input##offset, S_IRUGO, show_temp_##offset, NULL) \ static DEVICE_ATTR(temp_input##offset, S_IRUGO, show_temp_##offset, NULL) \
static DEVICE_ATTR(temp_max##offset, S_IRUGO | S_IWUSR, \ static DEVICE_ATTR(temp_max##offset, S_IRUGO | S_IWUSR, \
show_temp_##offset##_max, set_temp_##offset##_max) \ show_temp_##offset##_over, set_temp_##offset##_over) \
static DEVICE_ATTR(temp_min##offset, S_IRUGO | S_IWUSR, \ static DEVICE_ATTR(temp_hyst##offset, S_IRUGO | S_IWUSR, \
show_temp_##offset##_min, set_temp_##offset##_min) show_temp_##offset##_hyst, set_temp_##offset##_hyst)
show_temp_offset(1); show_temp_offset(1);
show_temp_offset(2); show_temp_offset(2);
...@@ -637,14 +635,14 @@ static DEVICE_ATTR(fan_div##offset, S_IRUGO | S_IWUSR, \ ...@@ -637,14 +635,14 @@ static DEVICE_ATTR(fan_div##offset, S_IRUGO | S_IWUSR, \
show_fan_offset(1); show_fan_offset(1);
show_fan_offset(2); show_fan_offset(2);
/* Alarm */ /* Alarms */
static ssize_t show_alarm(struct device *dev, char *buf) { static ssize_t show_alarms(struct device *dev, char *buf) {
struct i2c_client *client = to_i2c_client(dev); struct i2c_client *client = to_i2c_client(dev);
struct via686a_data *data = i2c_get_clientdata(client); struct via686a_data *data = i2c_get_clientdata(client);
via686a_update_client(client); via686a_update_client(client);
return sprintf(buf,"%d\n", ALARMS_FROM_REG(data->alarms)); return sprintf(buf,"%d\n", ALARMS_FROM_REG(data->alarms));
} }
static DEVICE_ATTR(alarm, S_IRUGO | S_IWUSR, show_alarm, NULL); static DEVICE_ATTR(alarms, S_IRUGO | S_IWUSR, show_alarms, NULL);
/* The driver. I choose to use type i2c_driver, as at is identical to both /* The driver. I choose to use type i2c_driver, as at is identical to both
smbus_driver and isa_driver, and clients could be of either kind */ smbus_driver and isa_driver, and clients could be of either kind */
...@@ -760,16 +758,16 @@ static int via686a_detect(struct i2c_adapter *adapter, int address, int kind) ...@@ -760,16 +758,16 @@ static int via686a_detect(struct i2c_adapter *adapter, int address, int kind)
device_create_file(&new_client->dev, &dev_attr_temp_max1); device_create_file(&new_client->dev, &dev_attr_temp_max1);
device_create_file(&new_client->dev, &dev_attr_temp_max2); device_create_file(&new_client->dev, &dev_attr_temp_max2);
device_create_file(&new_client->dev, &dev_attr_temp_max3); device_create_file(&new_client->dev, &dev_attr_temp_max3);
device_create_file(&new_client->dev, &dev_attr_temp_min1); device_create_file(&new_client->dev, &dev_attr_temp_hyst1);
device_create_file(&new_client->dev, &dev_attr_temp_min2); device_create_file(&new_client->dev, &dev_attr_temp_hyst2);
device_create_file(&new_client->dev, &dev_attr_temp_min3); device_create_file(&new_client->dev, &dev_attr_temp_hyst3);
device_create_file(&new_client->dev, &dev_attr_fan_input1); device_create_file(&new_client->dev, &dev_attr_fan_input1);
device_create_file(&new_client->dev, &dev_attr_fan_input2); device_create_file(&new_client->dev, &dev_attr_fan_input2);
device_create_file(&new_client->dev, &dev_attr_fan_min1); device_create_file(&new_client->dev, &dev_attr_fan_min1);
device_create_file(&new_client->dev, &dev_attr_fan_min2); device_create_file(&new_client->dev, &dev_attr_fan_min2);
device_create_file(&new_client->dev, &dev_attr_fan_div1); device_create_file(&new_client->dev, &dev_attr_fan_div1);
device_create_file(&new_client->dev, &dev_attr_fan_div2); device_create_file(&new_client->dev, &dev_attr_fan_div2);
device_create_file(&new_client->dev, &dev_attr_alarm); device_create_file(&new_client->dev, &dev_attr_alarms);
return 0; return 0;
......
...@@ -309,11 +309,11 @@ struct w83781d_data { ...@@ -309,11 +309,11 @@ struct w83781d_data {
u8 fan[3]; /* Register value */ u8 fan[3]; /* Register value */
u8 fan_min[3]; /* Register value */ u8 fan_min[3]; /* Register value */
u8 temp; u8 temp;
u8 temp_min; /* Register value */
u8 temp_max; /* Register value */ u8 temp_max; /* Register value */
u8 temp_hyst; /* Register value */
u16 temp_add[2]; /* Register value */ u16 temp_add[2]; /* Register value */
u16 temp_max_add[2]; /* Register value */ u16 temp_max_add[2]; /* Register value */
u16 temp_min_add[2]; /* Register value */ u16 temp_hyst_add[2]; /* Register value */
u8 fan_div[3]; /* Register encoding, shifted right */ u8 fan_div[3]; /* Register encoding, shifted right */
u8 vid; /* Register encoding, combined */ u8 vid; /* Register encoding, combined */
u32 alarms; /* Register encoding, combined */ u32 alarms; /* Register encoding, combined */
...@@ -510,8 +510,8 @@ static ssize_t show_##reg (struct device *dev, char *buf, int nr) \ ...@@ -510,8 +510,8 @@ static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
} \ } \
} }
show_temp_reg(temp); show_temp_reg(temp);
show_temp_reg(temp_min);
show_temp_reg(temp_max); show_temp_reg(temp_max);
show_temp_reg(temp_hyst);
#define store_temp_reg(REG, reg) \ #define store_temp_reg(REG, reg) \
static ssize_t store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \ static ssize_t store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \
...@@ -538,8 +538,8 @@ static ssize_t store_temp_##reg (struct device *dev, const char *buf, size_t cou ...@@ -538,8 +538,8 @@ static ssize_t store_temp_##reg (struct device *dev, const char *buf, size_t cou
\ \
return count; \ return count; \
} }
store_temp_reg(OVER, min); store_temp_reg(OVER, max);
store_temp_reg(HYST, max); store_temp_reg(HYST, hyst);
#define sysfs_temp_offset(offset) \ #define sysfs_temp_offset(offset) \
static ssize_t \ static ssize_t \
...@@ -562,8 +562,8 @@ static DEVICE_ATTR(temp_##reg##offset, S_IRUGO| S_IWUSR, show_regs_temp_##reg##o ...@@ -562,8 +562,8 @@ static DEVICE_ATTR(temp_##reg##offset, S_IRUGO| S_IWUSR, show_regs_temp_##reg##o
#define sysfs_temp_offsets(offset) \ #define sysfs_temp_offsets(offset) \
sysfs_temp_offset(offset); \ sysfs_temp_offset(offset); \
sysfs_temp_reg_offset(min, offset); \ sysfs_temp_reg_offset(max, offset); \
sysfs_temp_reg_offset(max, offset); sysfs_temp_reg_offset(hyst, offset);
sysfs_temp_offsets(1); sysfs_temp_offsets(1);
sysfs_temp_offsets(2); sysfs_temp_offsets(2);
...@@ -573,7 +573,7 @@ sysfs_temp_offsets(3); ...@@ -573,7 +573,7 @@ sysfs_temp_offsets(3);
do { \ do { \
device_create_file(&client->dev, &dev_attr_temp_input##offset); \ device_create_file(&client->dev, &dev_attr_temp_input##offset); \
device_create_file(&client->dev, &dev_attr_temp_max##offset); \ device_create_file(&client->dev, &dev_attr_temp_max##offset); \
device_create_file(&client->dev, &dev_attr_temp_min##offset); \ device_create_file(&client->dev, &dev_attr_temp_hyst##offset); \
} while (0) } while (0)
static ssize_t static ssize_t
...@@ -1865,15 +1865,15 @@ w83781d_update_client(struct i2c_client *client) ...@@ -1865,15 +1865,15 @@ w83781d_update_client(struct i2c_client *client)
} }
data->temp = w83781d_read_value(client, W83781D_REG_TEMP(1)); data->temp = w83781d_read_value(client, W83781D_REG_TEMP(1));
data->temp_min =
w83781d_read_value(client, W83781D_REG_TEMP_OVER(1));
data->temp_max = data->temp_max =
w83781d_read_value(client, W83781D_REG_TEMP_OVER(1));
data->temp_hyst =
w83781d_read_value(client, W83781D_REG_TEMP_HYST(1)); w83781d_read_value(client, W83781D_REG_TEMP_HYST(1));
data->temp_add[0] = data->temp_add[0] =
w83781d_read_value(client, W83781D_REG_TEMP(2)); w83781d_read_value(client, W83781D_REG_TEMP(2));
data->temp_max_add[0] = data->temp_max_add[0] =
w83781d_read_value(client, W83781D_REG_TEMP_OVER(2)); w83781d_read_value(client, W83781D_REG_TEMP_OVER(2));
data->temp_min_add[0] = data->temp_hyst_add[0] =
w83781d_read_value(client, W83781D_REG_TEMP_HYST(2)); w83781d_read_value(client, W83781D_REG_TEMP_HYST(2));
if (data->type != w83783s && data->type != w83697hf) { if (data->type != w83783s && data->type != w83697hf) {
data->temp_add[1] = data->temp_add[1] =
...@@ -1881,7 +1881,7 @@ w83781d_update_client(struct i2c_client *client) ...@@ -1881,7 +1881,7 @@ w83781d_update_client(struct i2c_client *client)
data->temp_max_add[1] = data->temp_max_add[1] =
w83781d_read_value(client, w83781d_read_value(client,
W83781D_REG_TEMP_OVER(3)); W83781D_REG_TEMP_OVER(3));
data->temp_min_add[1] = data->temp_hyst_add[1] =
w83781d_read_value(client, w83781d_read_value(client,
W83781D_REG_TEMP_HYST(3)); W83781D_REG_TEMP_HYST(3));
} }
......
...@@ -153,6 +153,7 @@ ...@@ -153,6 +153,7 @@
#define I2C_DRIVERID_FS451 1037 #define I2C_DRIVERID_FS451 1037
#define I2C_DRIVERID_W83627HF 1038 #define I2C_DRIVERID_W83627HF 1038
#define I2C_DRIVERID_LM85 1039 #define I2C_DRIVERID_LM85 1039
#define I2C_DRIVERID_LM83 1040
/* /*
* ---- Adapter types ---------------------------------------------------- * ---- Adapter types ----------------------------------------------------
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment