drm/i915: Enable MIPI port before the plane and pipe enable

As per the hw team's recommendation we need to enable the MIPI port
before enabling the plane and pipe. So call MIPI port enable in
pre_enable phase itself
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_dsi.c

@@ -131,21 +131,6 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder)
 	I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY);
 	usleep_range(2000, 2500);
 }
-static void intel_dsi_pre_enable(struct intel_encoder *encoder)
-{
-	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
-
-	DRM_DEBUG_KMS("\n");
-
-	if (intel_dsi->dev.dev_ops->panel_reset)
-		intel_dsi->dev.dev_ops->panel_reset(&intel_dsi->dev);
-
-	/* put device in ready state */
-	intel_dsi_device_ready(encoder);
-
-	if (intel_dsi->dev.dev_ops->send_otp_cmds)
-		intel_dsi->dev.dev_ops->send_otp_cmds(&intel_dsi->dev);
-}
 
 static void intel_dsi_enable(struct intel_encoder *encoder)
 {
@@ -165,15 +150,45 @@ static void intel_dsi_enable(struct intel_encoder *encoder)
 		dpi_send_cmd(intel_dsi, TURN_ON);
 		msleep(100);
 
+		if (intel_dsi->dev.dev_ops->enable)
+			intel_dsi->dev.dev_ops->enable(&intel_dsi->dev);
+
 		/* assert ip_tg_enable signal */
 		temp = I915_READ(MIPI_PORT_CTRL(pipe)) & ~LANE_CONFIGURATION_MASK;
 		temp = temp | intel_dsi->port_bits;
 		I915_WRITE(MIPI_PORT_CTRL(pipe), temp | DPI_ENABLE);
 		POSTING_READ(MIPI_PORT_CTRL(pipe));
 	}
+}
 
-	if (intel_dsi->dev.dev_ops->enable)
-		intel_dsi->dev.dev_ops->enable(&intel_dsi->dev);
+static void intel_dsi_pre_enable(struct intel_encoder *encoder)
+{
+	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+
+	DRM_DEBUG_KMS("\n");
+
+	if (intel_dsi->dev.dev_ops->panel_reset)
+		intel_dsi->dev.dev_ops->panel_reset(&intel_dsi->dev);
+
+	/* put device in ready state */
+	intel_dsi_device_ready(encoder);
+
+	if (intel_dsi->dev.dev_ops->send_otp_cmds)
+		intel_dsi->dev.dev_ops->send_otp_cmds(&intel_dsi->dev);
+
+	/* Enable port in pre-enable phase itself because as per hw team
+	 * recommendation, port should be enabled befor plane & pipe */
+	intel_dsi_enable(encoder);
+}
+
+static void intel_dsi_enable_nop(struct intel_encoder *encoder)
+{
+	DRM_DEBUG_KMS("\n");
+
+	/* for DSI port enable has to be done before pipe
+	 * and plane enable, so port enable is done in
+	 * pre_enable phase itself unlike other encoders
+	 */
 }
 
 static void intel_dsi_disable(struct intel_encoder *encoder)
@@ -600,7 +615,7 @@ bool intel_dsi_init(struct drm_device *dev)
 	intel_encoder->compute_config = intel_dsi_compute_config;
 	intel_encoder->pre_pll_enable = intel_dsi_pre_pll_enable;
 	intel_encoder->pre_enable = intel_dsi_pre_enable;
-	intel_encoder->enable = intel_dsi_enable;
+	intel_encoder->enable = intel_dsi_enable_nop;
 	intel_encoder->mode_set = intel_dsi_mode_set;
 	intel_encoder->disable = intel_dsi_disable;
 	intel_encoder->post_disable = intel_dsi_post_disable;