powerpc/8xx: Add Kernel Userspace Access Protection

This patch adds Kernel Userspace Access Protection on the 8xx.

When a page is RO or RW, it is set RO or RW for Key 0 and NA
for Key 1.

Up to now, the User group is defined with Key 0 for both User and
Supervisor.

By changing the group to Key 0 for User and Key 1 for Supervisor,
this patch prevents the Kernel from being able to access user data.

At exception entry, the kernel saves SPRN_MD_AP in the regs struct,
and reapply the protection. At exception exit it restores SPRN_MD_AP
with the value saved on exception entry.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Drop allow_read/write_to/from_user() as they're now in kup.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

arch/powerpc/include/asm/kup.h

@@ -5,6 +5,9 @@
 #ifdef CONFIG_PPC64
 #include <asm/book3s/64/kup-radix.h>
 #endif
+#ifdef CONFIG_PPC_8xx
+#include <asm/nohash/32/kup-8xx.h>
+#endif
 
 #ifdef __ASSEMBLY__
 #ifndef CONFIG_PPC_KUAP

arch/powerpc/include/asm/nohash/32/kup-8xx.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_POWERPC_KUP_8XX_H_
+#define _ASM_POWERPC_KUP_8XX_H_
+
+#include <asm/bug.h>
+
+#ifdef CONFIG_PPC_KUAP
+
+#ifdef __ASSEMBLY__
+
+.macro kuap_save_and_lock	sp, thread, gpr1, gpr2, gpr3
+	lis	\gpr2, MD_APG_KUAP@h	/* only APG0 and APG1 are used */
+	mfspr	\gpr1, SPRN_MD_AP
+	mtspr	SPRN_MD_AP, \gpr2
+	stw	\gpr1, STACK_REGS_KUAP(\sp)
+.endm
+
+.macro kuap_restore	sp, current, gpr1, gpr2, gpr3
+	lwz	\gpr1, STACK_REGS_KUAP(\sp)
+	mtspr	SPRN_MD_AP, \gpr1
+.endm
+
+.macro kuap_check	current, gpr
+#ifdef CONFIG_PPC_KUAP_DEBUG
+	mfspr	\gpr, SPRN_MD_AP
+	rlwinm	\gpr, \gpr, 16, 0xffff
+999:	twnei	\gpr, MD_APG_KUAP@h
+	EMIT_BUG_ENTRY 999b, __FILE__, __LINE__, (BUGFLAG_WARNING | BUGFLAG_ONCE)
+#endif
+.endm
+
+#else /* !__ASSEMBLY__ */
+
+#include <asm/reg.h>
+
+static inline void allow_user_access(void __user *to, const void __user *from,
+				     unsigned long size)
+{
+	mtspr(SPRN_MD_AP, MD_APG_INIT);
+}
+
+static inline void prevent_user_access(void __user *to, const void __user *from,
+				       unsigned long size)
+{
+	mtspr(SPRN_MD_AP, MD_APG_KUAP);
+}
+
+static inline bool bad_kuap_fault(struct pt_regs *regs, bool is_write)
+{
+	return WARN(!((regs->kuap ^ MD_APG_KUAP) & 0xf0000000),
+		    "Bug: fault blocked by AP register !");
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_PPC_KUAP */
+
+#endif /* _ASM_POWERPC_KUP_8XX_H_ */

arch/powerpc/include/asm/nohash/32/mmu-8xx.h

@@ -121,6 +121,13 @@
  */
 #define MD_APG_INIT	0x4fffffff
 
+/*
+ * 0 => No user => 01 (all accesses performed according to page definition)
+ * 1 => User => 10 (all accesses performed according to swaped page definition)
+ * 2-16 => NA => 11 (all accesses performed as user iaw page definition)
+ */
+#define MD_APG_KUAP	0x6fffffff
+
 /* The effective page number register.  When read, contains the information
  * about the last instruction TLB miss.  When MD_RPN is written, bits in
  * this register are used to create the TLB entry.

arch/powerpc/mm/8xx_mmu.c

@@ -225,3 +225,15 @@ void __init setup_kuep(bool disabled)
 	mtspr(SPRN_MI_AP, MI_APG_KUEP);
 }
 #endif
+
+#ifdef CONFIG_PPC_KUAP
+void __init setup_kuap(bool disabled)
+{
+	pr_info("Activating Kernel Userspace Access Protection\n");
+
+	if (disabled)
+		pr_warn("KUAP cannot be disabled yet on 8xx when compiled in\n");
+
+	mtspr(SPRN_MD_AP, MD_APG_KUAP);
+}
+#endif

arch/powerpc/platforms/Kconfig.cputype

@@ -35,6 +35,7 @@ config PPC_8xx
 	select FSL_SOC
 	select SYS_SUPPORTS_HUGETLBFS
 	select PPC_HAVE_KUEP
+	select PPC_HAVE_KUAP
 
 config 40x
 	bool "AMCC 40x"