Commit 26c17a17 authored by Marcin Wojtas's avatar Marcin Wojtas Committed by David S. Miller

net: mvneta: fix error path for building skb

In the actual RX processing, there is same error path for both descriptor
ring refilling and building skb fails. This is not correct, because after
successful refill, the ring is already updated with newly allocated
buffer. Then, in case of build_skb() fail, hitherto code left the original
buffer unmapped.

This patch fixes above situation by swapping error check of skb build with
DMA-unmap of original buffer.
Signed-off-by: default avatarMarcin Wojtas <mw@semihalf.com>
Acked-by: default avatarSimon Guinot <simon.guinot@sequanux.org>
Cc: <stable@vger.kernel.org> # v4.2+
Fixes a84e3289 ("net: mvneta: fix refilling for Rx DMA buffers")
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent dc1aadf6
...@@ -1580,12 +1580,16 @@ static int mvneta_rx(struct mvneta_port *pp, int rx_todo, ...@@ -1580,12 +1580,16 @@ static int mvneta_rx(struct mvneta_port *pp, int rx_todo,
} }
skb = build_skb(data, pp->frag_size > PAGE_SIZE ? 0 : pp->frag_size); skb = build_skb(data, pp->frag_size > PAGE_SIZE ? 0 : pp->frag_size);
if (!skb)
goto err_drop_frame;
/* After refill old buffer has to be unmapped regardless
* the skb is successfully built or not.
*/
dma_unmap_single(dev->dev.parent, phys_addr, dma_unmap_single(dev->dev.parent, phys_addr,
MVNETA_RX_BUF_SIZE(pp->pkt_size), DMA_FROM_DEVICE); MVNETA_RX_BUF_SIZE(pp->pkt_size), DMA_FROM_DEVICE);
if (!skb)
goto err_drop_frame;
rcvd_pkts++; rcvd_pkts++;
rcvd_bytes += rx_bytes; rcvd_bytes += rx_bytes;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment