Merge tag 'phy-for-5.16' of...

Merge tag 'phy-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next

Vinod writes:

phy-for-5.16

  - New support:
	- Kirin 970 PCIe PHY driver
	- Qualcomm QCM2290 USB2 and USB3 support

  - Updates:
        - Qualcomm synopsis phy driver updates
	- sc8180x PCIe update
	- cadence-torrent driver updates for output reference clock
	- stm32 phy tuning support

* tag 'phy-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (28 commits)
  phy: Sparx5 Eth SerDes: Fix return value check in sparx5_serdes_probe()
  phy: qcom-snps: Correct the FSEL_MASK
  phy: hisilicon: Add of_node_put() in phy-hisi-inno-usb2
  phy: qcom-qmp: another fix for the sc8180x PCIe definition
  phy: cadence-torrent: Add support to output received reference clock
  phy: cadence-torrent: Model reference clock driver as a clock to enable derived refclk
  dt-bindings: phy: cadence-torrent: Add clock IDs for derived and received refclk
  phy: cadence-torrent: Migrate to clk_hw based registration and OF APIs
  phy: ti: gmii-sel: check of_get_address() for failure
  dt-bindings: phy: qcom,qmp: IPQ6018 and IPQ8074 PCIe PHY require no supply
  phy: stm32: add phy tuning support
  dt-bindings: phy: phy-stm32-usbphyc: add optional phy tuning properties
  phy: stm32: restore utmi switch on resume
  dt-bindings: phy: rockchip: remove usb-phy fallback string for rk3066a/rk3188
  phy: qcom-qusb2: Fix a memory leak on probe
  phy: qcom-qmp: Add QCM2290 USB3 PHY support
  dt-bindings: phy: qcom,qmp: Add QCM2290 USB3 PHY
  phy: qcom-qusb2: Add missing vdd supply
  dt-bindings: phy: qcom,qusb2: Add missing vdd-supply
  phy: rockchip-inno-usb2: Make use of the helper function devm_add_action_or_reset()
  ...

Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml

@@ -18,13 +18,21 @@ properties:
     const: brcm,ns-usb2-phy
 
   reg:
-    items:
-      - description: iomem address range of DMU (Device Management Unit)
+    anyOf:
+      - maxItems: 1
+        description: PHY control register
+      - maxItems: 1
+        description: iomem address range of DMU (Device Management Unit)
+        deprecated: true
 
   reg-names:
     items:
       - const: dmu
 
+  brcm,syscon-clkset:
+    description: phandle to syscon for clkset register
+    $ref: /schemas/types.yaml#/definitions/phandle
+
   clocks:
     items:
       - description: USB PHY reference clock
@@ -39,20 +47,25 @@ properties:
 required:
   - compatible
   - reg
-  - reg-names
   - clocks
   - clock-names
   - "#phy-cells"
 
+oneOf:
+  - required:
+      - brcm,syscon-clkset
+  - required:
+      - reg-names
+
 additionalProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/bcm-nsp.h>
-    phy@1800c000 {
+    phy@1800c164 {
         compatible = "brcm,ns-usb2-phy";
-        reg = <0x1800c000 0x1000>;
-        reg-names = "dmu";
+        reg = <0x1800c164 0x4>;
+        brcm,syscon-clkset = <&clkset>;
         clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
         clock-names = "phy-ref-clk";
         #phy-cells = <0>;

Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml

@@ -81,6 +81,119 @@ patternProperties:
         properties:
           vbus-supply: true
 
+      # It can be necessary to adjust the PHY settings to compensate parasitics, which can be due
+      # to USB connector/receptacle, routing, ESD protection component,... Here is the list of
+      # all optional parameters to tune the interface of the PHY (HS for High-Speed, FS for Full-
+      # Speed, LS for Low-Speed)
+
+      st,current-boost-microamp:
+        description: Current boosting in uA
+        enum: [ 1000, 2000 ]
+
+      st,no-lsfs-fb-cap:
+        description: Disables the LS/FS feedback capacitor
+        type: boolean
+
+      st,decrease-hs-slew-rate:
+        description: Decreases the HS driver slew rate by 10%
+        type: boolean
+
+      st,tune-hs-dc-level:
+        description: |
+          Tunes the HS driver DC level
+          - <0> normal level
+          - <1> increases the level by 5 to 7 mV
+          - <2> increases the level by 10 to 14 mV
+          - <3> decreases the level by 5 to 7 mV
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
+        default: 0
+
+      st,enable-fs-rftime-tuning:
+        description: Enables the FS rise/fall tuning option
+        type: boolean
+
+      st,enable-hs-rftime-reduction:
+        description: Enables the HS rise/fall reduction feature
+        type: boolean
+
+      st,trim-hs-current:
+        description: |
+          Controls HS driver current trimming for choke compensation
+          - <0> = 18.87 mA target current / nominal + 0%
+          - <1> = 19.165 mA target current / nominal + 1.56%
+          - <2> = 19.46 mA target current / nominal + 3.12%
+          - <3> = 19.755 mA target current / nominal + 4.68%
+          - <4> = 20.05 mA target current / nominal + 6.24%
+          - <5> = 20.345 mA target current / nominal + 7.8%
+          - <6> = 20.64 mA target current / nominal + 9.36%
+          - <7> = 20.935 mA target current / nominal + 10.92%
+          - <8> = 21.23 mA target current / nominal + 12.48%
+          - <9> = 21.525 mA target current / nominal + 14.04%
+          - <10> = 21.82 mA target current / nominal + 15.6%
+          - <11> = 22.115 mA target current / nominal + 17.16%
+          - <12> = 22.458 mA target current / nominal + 19.01%
+          - <13> = 22.755 mA target current / nominal + 20.58%
+          - <14> = 23.052 mA target current / nominal + 22.16%
+          - <15> = 23.348 mA target current / nominal + 23.73%
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        default: 0
+
+      st,trim-hs-impedance:
+        description: |
+          Controls HS driver impedance tuning for choke compensation
+          - <0> = no impedance offset
+          - <1> = reduce the impedance by 2 ohms
+          - <2> = reduce the impedance by 4 ohms
+          - <3> = reduce the impedance by 6 ohms
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
+        default: 0
+
+      st,tune-squelch-level:
+        description: |
+          Tunes the squelch DC threshold value
+          - <0> = no shift in threshold
+          - <1> = threshold shift by +7 mV
+          - <2> = threshold shift by -5 mV
+          - <3> = threshold shift by +14 mV
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
+        default: 0
+
+      st,enable-hs-rx-gain-eq:
+        description: Enables the HS Rx gain equalizer
+        type: boolean
+
+      st,tune-hs-rx-offset:
+        description: |
+          Adjusts the HS Rx offset
+          - <0> = no offset
+          - <1> = offset of +5 mV
+          - <2> = offset of +10 mV
+          - <3> = offset of -5 mV
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
+        default: 0
+
+      st,no-hs-ftime-ctrl:
+        description: Disables the HS fall time control of single ended signals during pre-emphasis
+        type: boolean
+
+      st,no-lsfs-sc:
+        description: Disables the short circuit protection in LS/FS driver
+        type: boolean
+
+      st,enable-hs-tx-staggering:
+        description: Enables the basic staggering in HS Tx mode
+        type: boolean
+
     allOf:
       - if:
           properties:
@@ -137,6 +250,14 @@ examples:
             reg = <0>;
             phy-supply = <&vdd_usb>;
             #phy-cells = <0>;
+            st,tune-hs-dc-level = <2>;
+            st,enable-fs-rftime-tuning;
+            st,enable-hs-rftime-reduction;
+            st,trim-hs-current = <15>;
+            st,trim-hs-impedance = <1>;
+            st,tune-squelch-level = <3>;
+            st,tune-hs-rx-offset = <2>;
+            st,no-lsfs-sc;
             connector {
                 compatible = "usb-a-connector";
                 vbus-supply = <&vbus_sw>;
@@ -147,6 +268,14 @@ examples:
             reg = <1>;
             phy-supply = <&vdd_usb>;
             #phy-cells = <1>;
+            st,tune-hs-dc-level = <2>;
+            st,enable-fs-rftime-tuning;
+            st,enable-hs-rftime-reduction;
+            st,trim-hs-current = <15>;
+            st,trim-hs-impedance = <1>;
+            st,tune-squelch-level = <3>;
+            st,tune-hs-rx-offset = <2>;
+            st,no-lsfs-sc;
         };
     };
 ...

Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml

@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Qualcomm QMP PHY controller
 
 maintainers:
-  - Manu Gautam <mgautam@codeaurora.org>
+  - Vinod Koul <vkoul@kernel.org>
 
 description:
   QMP phy controller supports physical layer functionality for a number of
@@ -27,6 +27,7 @@ properties:
       - qcom,msm8998-qmp-pcie-phy
       - qcom,msm8998-qmp-ufs-phy
       - qcom,msm8998-qmp-usb3-phy
+      - qcom,qcm2290-qmp-usb3-phy
       - qcom,sc7180-qmp-usb3-phy
       - qcom,sc8180x-qmp-pcie-phy
       - qcom,sc8180x-qmp-ufs-phy
@@ -116,8 +117,6 @@ required:
   - clock-names
   - resets
   - reset-names
-  - vdda-phy-supply
-  - vdda-pll-supply
 
 additionalProperties: false
 
@@ -150,6 +149,9 @@ allOf:
           items:
             - const: phy
             - const: common
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
   - if:
       properties:
         compatible:
@@ -176,6 +178,9 @@ allOf:
           items:
             - const: phy
             - const: common
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
   - if:
       properties:
         compatible:
@@ -204,6 +209,9 @@ allOf:
             - const: phy
             - const: common
             - const: cfg
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
   - if:
       properties:
         compatible:
@@ -233,6 +241,9 @@ allOf:
           items:
             - const: phy
             - const: common
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
   - if:
       properties:
         compatible:
@@ -253,6 +264,9 @@ allOf:
         reset-names:
           items:
             - const: ufsphy
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
   - if:
       properties:
         compatible:
@@ -278,34 +292,16 @@ allOf:
         reset-names:
           items:
             - const: ufsphy
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,ipq8074-qmp-pcie-phy
-    then:
-      properties:
-        clocks:
-          items:
-            - description: pipe clk.
-        clock-names:
-          items:
-            - const: pipe_clk
-        resets:
-          items:
-            - description: reset of phy block.
-            - description: phy common block reset.
-        reset-names:
-          items:
-            - const: phy
-            - const: common
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
   - if:
       properties:
         compatible:
           contains:
             enum:
               - qcom,ipq6018-qmp-pcie-phy
+              - qcom,ipq8074-qmp-pcie-phy
     then:
       properties:
         clocks:
@@ -356,6 +352,9 @@ allOf:
         reset-names:
           items:
             - const: phy
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
   - if:
       properties:
         compatible:
@@ -387,6 +386,9 @@ allOf:
           items:
             - const: phy
             - const: common
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
   - if:
       properties:
         compatible:
@@ -414,6 +416,38 @@ allOf:
           items:
             - const: phy
             - const: common
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Phy config clock.
+            - description: 19.2 MHz ref clk.
+            - description: Phy common block aux clock.
+        clock-names:
+          items:
+            - const: cfg_ahb
+            - const: ref
+            - const: com_aux
+        resets:
+          items:
+            - description: phy_phy reset.
+            - description: reset of phy block.
+        reset-names:
+          items:
+            - const: phy_phy
+            - const: phy
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
 
 examples:
   - |

Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml

@@ -21,6 +21,7 @@ properties:
               - qcom,ipq8074-qusb2-phy
               - qcom,msm8996-qusb2-phy
               - qcom,msm8998-qusb2-phy
+              - qcom,qcm2290-qusb2-phy
               - qcom,sdm660-qusb2-phy
               - qcom,ipq6018-qusb2-phy
               - qcom,sm4250-qusb2-phy
@@ -50,6 +51,10 @@ properties:
       - const: ref
       - const: iface
 
+  vdd-supply:
+    description:
+      Phandle to 0.9V regulator supply to PHY digital circuit.
+
   vdda-pll-supply:
     description:
       Phandle to 1.8V regulator supply to PHY refclk pll block.
@@ -156,6 +161,7 @@ required:
   - "#phy-cells"
   - clocks
   - clock-names
+  - vdd-supply
   - vdda-pll-supply
   - vdda-phy-dpdm-supply
   - resets
@@ -174,6 +180,7 @@ examples:
                  <&gcc GCC_RX1_USB2_CLKREF_CLK>;
         clock-names = "cfg_ahb", "ref";
 
+        vdd-supply = <&pm8994_l28>;
         vdda-pll-supply = <&pm8994_l12>;
         vdda-phy-dpdm-supply = <&pm8994_l24>;
 

Documentation/devicetree/bindings/phy/rockchip-usb-phy.yaml

@@ -11,13 +11,10 @@ maintainers:
 
 properties:
   compatible:
-    oneOf:
-      - const: rockchip,rk3288-usb-phy
-      - items:
-          - enum:
+    enum:
       - rockchip,rk3066a-usb-phy
       - rockchip,rk3188-usb-phy
-          - const: rockchip,rk3288-usb-phy
+      - rockchip,rk3288-usb-phy
 
   "#address-cells":
     const: 1

drivers/phy/broadcom/Kconfig

@@ -2,6 +2,8 @@
 #
 # Phy drivers for Broadcom platforms
 #
+menu "PHY drivers for Broadcom platforms"
+
 config PHY_BCM63XX_USBH
 	tristate "BCM63xx USBH PHY driver"
 	depends on BMIPS_GENERIC || COMPILE_TEST
@@ -112,3 +114,5 @@ config PHY_BCM_SR_PCIE
 	help
 	  Enable this to support the Broadcom Stingray PCIe PHY
 	  If unsure, say N.
+
+endmenu

drivers/phy/hisilicon/Kconfig

@@ -33,6 +33,16 @@ config PHY_HI3670_USB
 
 	  To compile this driver as a module, choose M here.
 
+config PHY_HI3670_PCIE
+	tristate "hi3670 PCIe PHY support"
+	depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the HiSilicon hi3670 PCIe PHY.
+
+	  To compile this driver as a module, choose M here.
+
 config PHY_HISTB_COMBPHY
 	tristate "HiSilicon STB SoCs COMBPHY support"
 	depends on (ARCH_HISI && ARM64) || COMPILE_TEST

drivers/phy/hisilicon/Makefile

@@ -2,6 +2,7 @@
 obj-$(CONFIG_PHY_HI6220_USB)		+= phy-hi6220-usb.o
 obj-$(CONFIG_PHY_HI3660_USB)		+= phy-hi3660-usb3.o
 obj-$(CONFIG_PHY_HI3670_USB)		+= phy-hi3670-usb3.o
+obj-$(CONFIG_PHY_HI3670_PCIE)		+= phy-hi3670-pcie.o
 obj-$(CONFIG_PHY_HISTB_COMBPHY)		+= phy-histb-combphy.o
 obj-$(CONFIG_PHY_HISI_INNO_USB2)	+= phy-hisi-inno-usb2.o
 obj-$(CONFIG_PHY_HIX5HD2_SATA)		+= phy-hix5hd2-sata.o

drivers/phy/hisilicon/phy-hisi-inno-usb2.c

@@ -140,14 +140,19 @@ static int hisi_inno_phy_probe(struct platform_device *pdev)
 		struct phy *phy;
 
 		rst = of_reset_control_get_exclusive(child, NULL);
-		if (IS_ERR(rst))
+		if (IS_ERR(rst)) {
+			of_node_put(child);
 			return PTR_ERR(rst);
+		}
+
 		priv->ports[i].utmi_rst = rst;
 		priv->ports[i].priv = priv;
 
 		phy = devm_phy_create(dev, child, &hisi_inno_phy_ops);
-		if (IS_ERR(phy))
+		if (IS_ERR(phy)) {
+			of_node_put(child);
 			return PTR_ERR(phy);
+		}
 
 		phy_set_bus_width(phy, 8);
 		phy_set_drvdata(phy, &priv->ports[i]);
@@ -155,6 +160,7 @@ static int hisi_inno_phy_probe(struct platform_device *pdev)
 
 		if (i > INNO_PHY_PORT_NUM) {
 			dev_warn(dev, "Support %d ports in maximum\n", i);
+			of_node_put(child);
 			break;
 		}
 	}

drivers/phy/microchip/sparx5_serdes.c

@@ -2475,10 +2475,10 @@ static int sparx5_serdes_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 	iomem = devm_ioremap(priv->dev, iores->start, resource_size(iores));
-	if (IS_ERR(iomem)) {
+	if (!iomem) {
 		dev_err(priv->dev, "Unable to get serdes registers: %s\n",
 			iores->name);
-		return PTR_ERR(iomem);
+		return -ENOMEM;
 	}
 	for (idx = 0; idx < ARRAY_SIZE(sparx5_serdes_iomap); idx++) {
 		struct sparx5_serdes_io_resource *iomap = &sparx5_serdes_iomap[idx];

drivers/phy/qualcomm/phy-qcom-qmp.c

@@ -135,6 +135,8 @@ enum qphy_reg_layout {
 	QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
 	QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
 	QPHY_PCS_POWER_DOWN_CONTROL,
+	/* PCS_MISC registers */
+	QPHY_PCS_MISC_TYPEC_CTRL,
 	/* Keep last to ensure regs_layout arrays are properly initialized */
 	QPHY_LAYOUT_SIZE
 };
@@ -229,6 +231,16 @@ static const unsigned int sm8350_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR]  = 0x1014,
 };
 
+static const unsigned int qcm2290_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+	[QPHY_SW_RESET]			= 0x00,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x04,
+	[QPHY_START_CTRL]		= 0x08,
+	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0xd8,
+	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0xdc,
+	[QPHY_PCS_STATUS]		= 0x174,
+	[QPHY_PCS_MISC_TYPEC_CTRL]	= 0x00,
+};
+
 static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_START_CTRL]		= 0x00,
 	[QPHY_PCS_READY_STATUS]		= 0x160,
@@ -2761,6 +2773,99 @@ static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
 };
 
+static const struct qmp_phy_init_tbl qcm2290_usb3_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL2, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_INITVAL, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x01),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0xc6),
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x00),
+};
+
+static const struct qmp_phy_init_tbl qcm2290_usb3_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
+};
+
 struct qmp_phy;
 
 /* struct qmp_phy_cfg - per-PHY initialization config */
@@ -2995,6 +3100,10 @@ static const char * const qmp_v4_sdx55_usbphy_clk_l[] = {
 	"aux", "cfg_ahb", "ref"
 };
 
+static const char * const qcm2290_usb3phy_clk_l[] = {
+	"cfg_ahb", "ref", "com_aux",
+};
+
 /* list of resets */
 static const char * const msm8996_pciephy_reset_l[] = {
 	"phy", "common", "cfg",
@@ -3008,6 +3117,10 @@ static const char * const sc7180_usb3phy_reset_l[] = {
 	"phy",
 };
 
+static const char * const qcm2290_usb3phy_reset_l[] = {
+	"phy_phy", "phy",
+};
+
 static const char * const sdm845_pciephy_reset_l[] = {
 	"phy",
 };
@@ -3632,7 +3745,7 @@ static const struct qmp_phy_cfg sc8180x_pciephy_cfg = {
 	.nlanes = 1,
 
 	.serdes_tbl		= sc8180x_qmp_pcie_serdes_tbl,
-	.serdes_tbl_num		= ARRAY_SIZE(sm8250_qmp_pcie_serdes_tbl),
+	.serdes_tbl_num		= ARRAY_SIZE(sc8180x_qmp_pcie_serdes_tbl),
 	.tx_tbl			= sc8180x_qmp_pcie_tx_tbl,
 	.tx_tbl_num		= ARRAY_SIZE(sc8180x_qmp_pcie_tx_tbl),
 	.rx_tbl			= sc8180x_qmp_pcie_rx_tbl,
@@ -3974,6 +4087,33 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
 	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
 };
 
+static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
+	.type			= PHY_TYPE_USB3,
+	.nlanes			= 1,
+
+	.serdes_tbl		= qcm2290_usb3_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(qcm2290_usb3_serdes_tbl),
+	.tx_tbl			= qcm2290_usb3_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(qcm2290_usb3_tx_tbl),
+	.rx_tbl			= qcm2290_usb3_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(qcm2290_usb3_rx_tbl),
+	.pcs_tbl		= qcm2290_usb3_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(qcm2290_usb3_pcs_tbl),
+	.clk_list		= qcm2290_usb3phy_clk_l,
+	.num_clks		= ARRAY_SIZE(qcm2290_usb3phy_clk_l),
+	.reset_list		= qcm2290_usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(qcm2290_usb3phy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= qcm2290_usb3phy_regs_layout,
+
+	.start_ctrl		= SERDES_START | PCS_START,
+	.pwrdn_ctrl		= SW_PWRDN,
+	.phy_status		= PHYSTATUS,
+
+	.is_dual_lane_phy	= true,
+};
+
 static void qcom_qmp_phy_configure_lane(void __iomem *base,
 					const unsigned int *regs,
 					const struct qmp_phy_init_tbl tbl[],
@@ -5154,11 +5294,7 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np)
 	 * Roll a devm action because the clock provider is the child node, but
 	 * the child node is not actually a device.
 	 */
-	ret = devm_add_action(qmp->dev, phy_clk_release_provider, np);
-	if (ret)
-		phy_clk_release_provider(np);
-
-	return ret;
+	return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
 }
 
 /*
@@ -5350,11 +5486,7 @@ static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy,
 	 * Roll a devm action because the clock provider is the child node, but
 	 * the child node is not actually a device.
 	 */
-	ret = devm_add_action(qmp->dev, phy_clk_release_provider, np);
-	if (ret)
-		phy_clk_release_provider(np);
-
-	return ret;
+	return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
 }
 
 static const struct phy_ops qcom_qmp_phy_gen_ops = {
@@ -5613,6 +5745,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
 	}, {
 		.compatible = "qcom,sm8350-qmp-usb3-uni-phy",
 		.data = &sm8350_usb3_uniphy_cfg,
+	}, {
+		.compatible = "qcom,qcm2290-qmp-usb3-phy",
+		.data = &qcm2290_usb3phy_cfg,
 	},
 	{ },
 };

drivers/phy/qualcomm/phy-qcom-qmp.h

@@ -169,6 +169,7 @@
 #define QSERDES_COM_BIAS_EN_CTRL_BY_PSM			0x0a8
 #define QSERDES_COM_SYSCLK_EN_SEL			0x0ac
 #define QSERDES_COM_RESETSM_CNTRL			0x0b4
+#define QSERDES_COM_RESETSM_CNTRL2			0x0b8
 #define QSERDES_COM_RESTRIM_CTRL			0x0bc
 #define QSERDES_COM_RESCODE_DIV_NUM			0x0c4
 #define QSERDES_COM_LOCK_CMP_EN				0x0c8
@@ -181,6 +182,7 @@
 #define QSERDES_COM_DIV_FRAC_START1_MODE1		0x0e8
 #define QSERDES_COM_DIV_FRAC_START2_MODE1		0x0ec
 #define QSERDES_COM_DIV_FRAC_START3_MODE1		0x0f0
+#define QSERDES_COM_INTEGLOOP_INITVAL			0x100
 #define QSERDES_COM_INTEGLOOP_GAIN0_MODE0		0x108
 #define QSERDES_COM_INTEGLOOP_GAIN1_MODE0		0x10c
 #define QSERDES_COM_INTEGLOOP_GAIN0_MODE1		0x110

drivers/phy/qualcomm/phy-qcom-qusb2.c

@@ -371,7 +371,7 @@ static const struct qusb2_phy_cfg sm6115_phy_cfg = {
 };
 
 static const char * const qusb2_phy_vreg_names[] = {
-	"vdda-pll", "vdda-phy-dpdm",
+	"vdd", "vdda-pll", "vdda-phy-dpdm",
 };
 
 #define QUSB2_NUM_VREGS		ARRAY_SIZE(qusb2_phy_vreg_names)
@@ -561,7 +561,7 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
 {
 	struct device *dev = &qphy->phy->dev;
 	const struct qusb2_phy_cfg *cfg = qphy->cfg;
-	u8 *val;
+	u8 *val, hstx_trim;
 
 	/* efuse register is optional */
 	if (!qphy->cell)
@@ -575,7 +575,13 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
 	 * set while configuring the phy.
 	 */
 	val = nvmem_cell_read(qphy->cell, NULL);
-	if (IS_ERR(val) || !val[0]) {
+	if (IS_ERR(val)) {
+		dev_dbg(dev, "failed to read a valid hs-tx trim value\n");
+		return;
+	}
+	hstx_trim = val[0];
+	kfree(val);
+	if (!hstx_trim) {
 		dev_dbg(dev, "failed to read a valid hs-tx trim value\n");
 		return;
 	}
@@ -583,12 +589,10 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
 	/* Fused TUNE1/2 value is the higher nibble only */
 	if (cfg->update_tune1_with_efuse)
 		qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
-				 val[0] << HSTX_TRIM_SHIFT,
-				 HSTX_TRIM_MASK);
+				 hstx_trim << HSTX_TRIM_SHIFT, HSTX_TRIM_MASK);
 	else
 		qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
-				 val[0] << HSTX_TRIM_SHIFT,
-				 HSTX_TRIM_MASK);
+				 hstx_trim << HSTX_TRIM_SHIFT, HSTX_TRIM_MASK);
 }
 
 static int qusb2_phy_set_mode(struct phy *phy,
@@ -913,6 +917,9 @@ static const struct of_device_id qusb2_phy_of_match_table[] = {
 	}, {
 		.compatible	= "qcom,msm8998-qusb2-phy",
 		.data		= &msm8998_phy_cfg,
+	}, {
+		.compatible	= "qcom,qcm2290-qusb2-phy",
+		.data		= &sm6115_phy_cfg,
 	}, {
 		.compatible	= "qcom,sdm660-qusb2-phy",
 		.data		= &sdm660_phy_cfg,

drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c

@@ -33,7 +33,7 @@
 
 #define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0	(0x54)
 #define RETENABLEN				BIT(3)
-#define FSEL_MASK				GENMASK(7, 5)
+#define FSEL_MASK				GENMASK(6, 4)
 #define FSEL_DEFAULT				(0x3 << 4)
 
 #define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1	(0x58)

drivers/phy/rockchip/phy-rockchip-inno-usb2.c

@@ -321,7 +321,7 @@ rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy)
 	struct device_node *node = rphy->dev->of_node;
 	struct clk_init_data init;
 	const char *clk_name;
-	int ret;
+	int ret = 0;
 
 	init.flags = 0;
 	init.name = "clk_usbphy_480m";
@@ -352,15 +352,8 @@ rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy)
 	if (ret < 0)
 		goto err_clk_provider;
 
-	ret = devm_add_action(rphy->dev, rockchip_usb2phy_clk480m_unregister,
-			      rphy);
-	if (ret < 0)
-		goto err_unreg_action;
-
-	return 0;
+	return devm_add_action_or_reset(rphy->dev, rockchip_usb2phy_clk480m_unregister, rphy);
 
-err_unreg_action:
-	of_clk_del_provider(node);
 err_clk_provider:
 	clk_unregister(rphy->clk480m);
 err_ret:

drivers/phy/samsung/Kconfig

@@ -30,16 +30,16 @@ config PHY_EXYNOS_PCIE
 	  This driver provides PHY interface for Exynos PCIe controller.
 
 config PHY_SAMSUNG_UFS
-	tristate "SAMSUNG SoC series UFS PHY driver"
+	tristate "Exynos SoC series UFS PHY driver"
 	depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
 	select GENERIC_PHY
 	help
-	  Enable this to support the Samsung UFS PHY driver for
-	  Samsung SoCs. This driver provides the interface for UFS
-	  host controller to do PHY related programming.
+	  Enable this to support the Samsung Exynos SoC UFS PHY driver for
+	  Samsung Exynos SoCs. This driver provides the interface for UFS host
+	  controller to do PHY related programming.
 
 config PHY_SAMSUNG_USB2
-	tristate "Samsung USB 2.0 PHY driver"
+	tristate "S5P/Exynos SoC series USB 2.0 PHY driver"
 	depends on HAS_IOMEM
 	depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 || COMPILE_TEST
 	select GENERIC_PHY
@@ -47,9 +47,9 @@ config PHY_SAMSUNG_USB2
 	default ARCH_EXYNOS
 	help
 	  Enable this to support the Samsung USB 2.0 PHY driver for Samsung
-	  SoCs. This driver provides the interface for USB 2.0 PHY. Support
-	  for particular PHYs will be enabled based on the SoC type in addition
-	  to this driver.
+	  S5Pv210 and Exynos SoCs. This driver provides the interface for USB
+	  2.0 PHY. Support for particular PHYs will be enabled based on the SoC
+	  type in addition to this driver.
 
 config PHY_EXYNOS4210_USB2
 	bool

drivers/phy/st/phy-stm32-usbphyc.c

@@ -20,6 +20,7 @@
 #define STM32_USBPHYC_PLL	0x0
 #define STM32_USBPHYC_MISC	0x8
 #define STM32_USBPHYC_MONITOR(X) (0x108 + ((X) * 0x100))
+#define STM32_USBPHYC_TUNE(X)	(0x10C + ((X) * 0x100))
 #define STM32_USBPHYC_VERSION	0x3F4
 
 /* STM32_USBPHYC_PLL bit fields */
@@ -41,6 +42,83 @@
 #define STM32_USBPHYC_MON_SEL_LOCKP 0x1F
 #define STM32_USBPHYC_MON_OUT_LOCKP BIT(3)
 
+/* STM32_USBPHYC_TUNE bit fields */
+#define INCURREN		BIT(0)
+#define INCURRINT		BIT(1)
+#define LFSCAPEN		BIT(2)
+#define HSDRVSLEW		BIT(3)
+#define HSDRVDCCUR		BIT(4)
+#define HSDRVDCLEV		BIT(5)
+#define HSDRVCURINCR		BIT(6)
+#define FSDRVRFADJ		BIT(7)
+#define HSDRVRFRED		BIT(8)
+#define HSDRVCHKITRM		GENMASK(12, 9)
+#define HSDRVCHKZTRM		GENMASK(14, 13)
+#define OTPCOMP			GENMASK(19, 15)
+#define SQLCHCTL		GENMASK(21, 20)
+#define HDRXGNEQEN		BIT(22)
+#define HSRXOFF			GENMASK(24, 23)
+#define HSFALLPREEM		BIT(25)
+#define SHTCCTCTLPROT		BIT(26)
+#define STAGSEL			BIT(27)
+
+enum boosting_vals {
+	BOOST_1000_UA = 1000,
+	BOOST_2000_UA = 2000,
+};
+
+enum dc_level_vals {
+	DC_NOMINAL,
+	DC_PLUS_5_TO_7_MV,
+	DC_PLUS_10_TO_14_MV,
+	DC_MINUS_5_TO_7_MV,
+	DC_MAX,
+};
+
+enum current_trim {
+	CUR_NOMINAL,
+	CUR_PLUS_1_56_PCT,
+	CUR_PLUS_3_12_PCT,
+	CUR_PLUS_4_68_PCT,
+	CUR_PLUS_6_24_PCT,
+	CUR_PLUS_7_8_PCT,
+	CUR_PLUS_9_36_PCT,
+	CUR_PLUS_10_92_PCT,
+	CUR_PLUS_12_48_PCT,
+	CUR_PLUS_14_04_PCT,
+	CUR_PLUS_15_6_PCT,
+	CUR_PLUS_17_16_PCT,
+	CUR_PLUS_19_01_PCT,
+	CUR_PLUS_20_58_PCT,
+	CUR_PLUS_22_16_PCT,
+	CUR_PLUS_23_73_PCT,
+	CUR_MAX,
+};
+
+enum impedance_trim {
+	IMP_NOMINAL,
+	IMP_MINUS_2_OHMS,
+	IMP_MINUS_4_OMHS,
+	IMP_MINUS_6_OHMS,
+	IMP_MAX,
+};
+
+enum squelch_level {
+	SQLCH_NOMINAL,
+	SQLCH_PLUS_7_MV,
+	SQLCH_MINUS_5_MV,
+	SQLCH_PLUS_14_MV,
+	SQLCH_MAX,
+};
+
+enum rx_offset {
+	NO_RX_OFFSET,
+	RX_OFFSET_PLUS_5_MV,
+	RX_OFFSET_PLUS_10_MV,
+	RX_OFFSET_MINUS_5_MV,
+	RX_OFFSET_MAX,
+};
+
 /* STM32_USBPHYC_VERSION bit fields */
 #define MINREV			GENMASK(3, 0)
 #define MAJREV			GENMASK(7, 4)
@@ -60,6 +138,7 @@ struct stm32_usbphyc_phy {
 	struct regulator *vbus;
 	u32 index;
 	bool active;
+	u32 tune;
 };
 
 struct stm32_usbphyc {
@@ -375,6 +454,107 @@ static int stm32_usbphyc_clk48_register(struct stm32_usbphyc *usbphyc)
 	return ret;
 }
 
+static void stm32_usbphyc_phy_tuning(struct stm32_usbphyc *usbphyc,
+				     struct device_node *np, u32 index)
+{
+	struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys[index];
+	u32 reg = STM32_USBPHYC_TUNE(index);
+	u32 otpcomp, val;
+	int ret;
+
+	/* Backup OTP compensation code */
+	otpcomp = FIELD_GET(OTPCOMP, readl_relaxed(usbphyc->base + reg));
+
+	ret = of_property_read_u32(np, "st,current-boost-microamp", &val);
+	if (ret != -EINVAL) {
+		if (!ret && (val == BOOST_1000_UA || val == BOOST_2000_UA)) {
+			val = (val == BOOST_2000_UA) ? 1 : 0;
+			usbphyc_phy->tune |= INCURREN | FIELD_PREP(INCURRINT, val);
+		} else {
+			dev_warn(usbphyc->dev, "phy%d: invalid st,current-boost-microamp\n", index);
+		}
+	}
+
+	if (!of_property_read_bool(np, "st,no-lsfs-fb-cap"))
+		usbphyc_phy->tune |= LFSCAPEN;
+
+	if (of_property_read_bool(np, "st,slow-hs-slew-rate"))
+		usbphyc_phy->tune |= HSDRVSLEW;
+
+	ret = of_property_read_u32(np, "st,tune-hs-dc-level", &val);
+	if (ret != -EINVAL) {
+		if (!ret && val < DC_MAX) {
+			if (val == DC_MINUS_5_TO_7_MV) {/* Decreases HS driver DC level */
+				usbphyc_phy->tune |= HSDRVDCCUR;
+			} else if (val > 0) {		/* Increases HS driver DC level */
+				val = (val == DC_PLUS_10_TO_14_MV) ? 1 : 0;
+				usbphyc_phy->tune |= HSDRVCURINCR | FIELD_PREP(HSDRVDCLEV, val);
+			}
+		} else {
+			dev_warn(usbphyc->dev, "phy%d: invalid st,tune-hs-dc-level\n", index);
+		}
+	}
+
+	if (of_property_read_bool(np, "st,enable-fs-rftime-tuning"))
+		usbphyc_phy->tune |= FSDRVRFADJ;
+
+	if (of_property_read_bool(np, "st,enable-hs-rftime-reduction"))
+		usbphyc_phy->tune |= HSDRVRFRED;
+
+	ret = of_property_read_u32(np, "st,trim-hs-current", &val);
+	if (ret != -EINVAL) {
+		if (!ret && val < CUR_MAX)
+			usbphyc_phy->tune |= FIELD_PREP(HSDRVCHKITRM, val);
+		else
+			dev_warn(usbphyc->dev, "phy%d: invalid st,trim-hs-current\n", index);
+	}
+
+	ret = of_property_read_u32(np, "st,trim-hs-impedance", &val);
+	if (ret != -EINVAL) {
+		if (!ret && val < IMP_MAX)
+			usbphyc_phy->tune |= FIELD_PREP(HSDRVCHKZTRM, val);
+		else
+			dev_warn(usbphyc->dev, "phy%d: invalid st,trim-hs-impedance\n", index);
+	}
+
+	ret = of_property_read_u32(np, "st,tune-squelch-level", &val);
+	if (ret != -EINVAL) {
+		if (!ret && val < SQLCH_MAX)
+			usbphyc_phy->tune |= FIELD_PREP(SQLCHCTL, val);
+		else
+			dev_warn(usbphyc->dev, "phy%d: invalid st,tune-squelch\n", index);
+	}
+
+	if (of_property_read_bool(np, "st,enable-hs-rx-gain-eq"))
+		usbphyc_phy->tune |= HDRXGNEQEN;
+
+	ret = of_property_read_u32(np, "st,tune-hs-rx-offset", &val);
+	if (ret != -EINVAL) {
+		if (!ret && val < RX_OFFSET_MAX)
+			usbphyc_phy->tune |= FIELD_PREP(HSRXOFF, val);
+		else
+			dev_warn(usbphyc->dev, "phy%d: invalid st,tune-hs-rx-offset\n", index);
+	}
+
+	if (of_property_read_bool(np, "st,no-hs-ftime-ctrl"))
+		usbphyc_phy->tune |= HSFALLPREEM;
+
+	if (!of_property_read_bool(np, "st,no-lsfs-sc"))
+		usbphyc_phy->tune |= SHTCCTCTLPROT;
+
+	if (of_property_read_bool(np, "st,enable-hs-tx-staggering"))
+		usbphyc_phy->tune |= STAGSEL;
+
+	/* Restore OTP compensation code */
+	usbphyc_phy->tune |= FIELD_PREP(OTPCOMP, otpcomp);
+
+	/*
+	 * By default, if no st,xxx tuning property is used, usbphyc_phy->tune is equal to
+	 * STM32_USBPHYC_TUNE reset value (LFSCAPEN | SHTCCTCTLPROT | OTPCOMP).
+	 */
+	writel_relaxed(usbphyc_phy->tune, usbphyc->base + reg);
+}
+
 static void stm32_usbphyc_switch_setup(struct stm32_usbphyc *usbphyc,
 				       u32 utmi_switch)
 {
@@ -550,6 +730,9 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
 			usbphyc->phys[port]->vbus = NULL;
 		}
 
+		/* Configure phy tuning */
+		stm32_usbphyc_phy_tuning(usbphyc, child, index);
+
 		port++;
 	}
 
@@ -598,6 +781,25 @@ static int stm32_usbphyc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int __maybe_unused stm32_usbphyc_resume(struct device *dev)
+{
+	struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev);
+	struct stm32_usbphyc_phy *usbphyc_phy;
+	int port;
+
+	if (usbphyc->switch_setup >= 0)
+		stm32_usbphyc_switch_setup(usbphyc, usbphyc->switch_setup);
+
+	for (port = 0; port < usbphyc->nphys; port++) {
+		usbphyc_phy = usbphyc->phys[port];
+		writel_relaxed(usbphyc_phy->tune, usbphyc->base + STM32_USBPHYC_TUNE(port));
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(stm32_usbphyc_pm_ops, NULL, stm32_usbphyc_resume);
+
 static const struct of_device_id stm32_usbphyc_of_match[] = {
 	{ .compatible = "st,stm32mp1-usbphyc", },
 	{ },
@@ -610,6 +812,7 @@ static struct platform_driver stm32_usbphyc_driver = {
 	.driver = {
 		.of_match_table = stm32_usbphyc_of_match,
 		.name = "stm32-usbphyc",
+		.pm = &stm32_usbphyc_pm_ops,
 	}
 };
 module_platform_driver(stm32_usbphyc_driver);

drivers/phy/ti/phy-gmii-sel.c

@@ -320,6 +320,8 @@ static int phy_gmii_sel_init_ports(struct phy_gmii_sel_priv *priv)
 		u64 size;
 
 		offset = of_get_address(dev->of_node, 0, &size, NULL);
+		if (!offset)
+			return -EINVAL;
 		priv->num_ports = size / sizeof(u32);
 		if (!priv->num_ports)
 			return -EINVAL;

include/dt-bindings/phy/phy-cadence.h

@@ -12,6 +12,8 @@
 #define TORRENT_SERDES_INTERNAL_SSC	2
 
 #define CDNS_TORRENT_REFCLK_DRIVER      0
+#define CDNS_TORRENT_DERIVED_REFCLK	1
+#define CDNS_TORRENT_RECEIVED_REFCLK	2
 
 /* Sierra */
 #define CDNS_SIERRA_PLL_CMNLC		0