v2.4.2.8 -> v2.4.3

  - Kai Germaschewski: Makefile dependency fixes. ISDN update
  - Chris Mason: another reiserfs tail writing fix
  - unify pte/pmd allocation
  - undo some VIA PCI fixups - conflicting behaviour

Documentation/isdn/INTERFACE

-$Id: INTERFACE,v 1.15.8.1 2001/02/16 16:43:22 kai Exp $
+$Id: INTERFACE,v 1.15.8.2 2001/03/13 16:17:07 kai Exp $
 
 Description of the Interface between Linklevel and Hardwarelevel
   of isdn4linux:

Documentation/isdn/README.eicon

-$Id: README.eicon,v 1.10 2000/08/13 12:19:15 armin Exp $
+$Id: README.eicon,v 1.10.6.1 2001/02/19 10:04:59 armin Exp $
 
 (c) 1999,2000 Armin Schindler (mac@melware.de)
 (c) 1999,2000 Cytronics & Melware (info@melware.de)

Documentation/parport.txt

@@ -19,12 +19,12 @@ Parport as modules
 
 If you load the parport code as a module, say
 
-	# insmod parport.o
+	# insmod parport
 
 to load the generic parport code.  You then must load the
 architecture-dependent code with (for example):
 
-	# insmod parport_pc.o io=0x3bc,0x378,0x278 irq=none,7,auto
+	# insmod parport_pc io=0x3bc,0x378,0x278 irq=none,7,auto
 
 to tell the parport code that you want three PC-style ports, one at
 0x3bc with no IRQ, one at 0x378 using IRQ 7, and one at 0x278 with an
@@ -192,7 +192,7 @@ is loaded it will create one lp device for each port found.  You can
 override this, though, by using parameters either when you load the lp
 driver:
 
-	# insmod lp.o parport=0,2
+	# insmod lp parport=0,2
 
 or on the LILO command line:
 

Makefile

 VERSION = 2
 PATCHLEVEL = 4
 SUBLEVEL = 3
-EXTRAVERSION =-pre8
+EXTRAVERSION =
 
 KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 

arch/i386/kernel/pci-pc.c

@@ -968,23 +968,13 @@ static void __init pci_fixup_vt8363(struct pci_dev *d)
 		printk("PCI: Bus master Pipeline request disabled\n");
 		pci_write_config_byte(d, 0x54, tmp & ~(1<<2));
 	}
-	pci_read_config_byte(d, 0x54, &tmp);
-	if(tmp & (1)) {
-		printk("PCI: Fast Write to Read turnaround disabled\n");
-		pci_write_config_byte(d, 0x54, tmp & ~(1));
-	}
 	pci_read_config_byte(d, 0x70, &tmp);
 	if(tmp & (1<<3)) {
 		printk("PCI: Disabled enhanced CPU to PCI writes\n");
 		pci_write_config_byte(d, 0x70, tmp & ~(1<<3));
 	}
-	pci_read_config_byte(d, 0x70, &tmp);
-	if(tmp & (1<<2)) {
-		printk("PCI: Disabled Master Read Caching\n");
-		pci_write_config_byte(d, 0x70, tmp & ~(1<<2));
-	}
 	pci_read_config_byte(d, 0x71, &tmp);
-	if ((tmp & (1<<3))==0) {
+	if((tmp & (1<<3)) == 0) {
 		printk("PCI: Bursting cornercase bug worked around\n");
 		pci_write_config_byte(d, 0x71, tmp | (1<<3));
 	}

arch/i386/mm/init.c

@@ -50,11 +50,11 @@ int do_check_pgt_cache(int low, int high)
 				freed++;
 			}
 			if (pmd_quicklist) {
-				pmd_free_slow(pmd_alloc_one_fast());
+				pmd_free_slow(pmd_alloc_one_fast(NULL, 0));
 				freed++;
 			}
 			if (pte_quicklist) {
-				pte_free_slow(pte_alloc_one_fast(0));
+				pte_free_slow(pte_alloc_one_fast(NULL, 0));
 				freed++;
 			}
 		} while(pgtable_cache_size > low);

arch/ppc/mm/init.c

@@ -216,7 +216,7 @@ int do_check_pgt_cache(int low, int high)
 				freed++;
 			}
 			if (pte_quicklist) {
-				pte_free_slow(pte_alloc_one_fast(0));
+				pte_free_slow(pte_alloc_one_fast(NULL, 0));
 				freed++;
 			}
 		} while (pgtable_cache_size > low);

arch/sparc64/kernel/process.c

@@ -416,9 +416,9 @@ void flush_thread(void)
 			unsigned long pgd_cache;
 
 			if (pgd_none(*pgd0)) {
-				pmd_t *page = pmd_alloc_one_fast();
+				pmd_t *page = pmd_alloc_one_fast(NULL, 0);
 				if (!page)
-					page = pmd_alloc_one();
+					page = pmd_alloc_one(NULL, 0);
 				pgd_set(pgd0, page);
 			}
 			pgd_cache = pgd_val(*pgd0) << 11UL;

arch/sparc64/mm/generic.c

-/* $Id: generic.c,v 1.15 2001/03/24 09:36:01 davem Exp $
+/* $Id: generic.c,v 1.16 2001/03/25 04:40:05 davem Exp $
  * generic.c: Generic Sparc mm routines that are not dependent upon
  *            MMU type but are Sparc specific.
  *
@@ -107,9 +107,7 @@ static inline int io_remap_pmd_range(pmd_t * pmd, unsigned long address, unsigne
 		pte_t * pte = pte_alloc(current->mm, pmd, address);
 		if (!pte)
 			return -ENOMEM;
-		spin_lock(&current->mm->page_table_lock);
 		io_remap_pte_range(pte, address, end - address, address + offset, prot, space);
-		spin_unlock(&current->mm->page_table_lock);
 		address = (address + PMD_SIZE) & PMD_MASK;
 		pmd++;
 	} while (address < end);
@@ -122,11 +120,14 @@ int io_remap_page_range(unsigned long from, unsigned long offset, unsigned long
 	pgd_t * dir;
 	unsigned long beg = from;
 	unsigned long end = from + size;
+	struct mm_struct *mm = current->mm;
 
 	prot = __pgprot(pg_iobits);
 	offset -= from;
-	dir = pgd_offset(current->mm, from);
-	flush_cache_range(current->mm, beg, end);
+	dir = pgd_offset(mm, from);
+	flush_cache_range(mm, beg, end);
+
+	spin_lock(&mm->page_table_lock);
 	while (from < end) {
 		pmd_t *pmd = pmd_alloc(current->mm, dir, from);
 		error = -ENOMEM;
@@ -138,6 +139,8 @@ int io_remap_page_range(unsigned long from, unsigned long offset, unsigned long
 		from = (from + PGDIR_SIZE) & PGDIR_MASK;
 		dir++;
 	}
+	spin_unlock(&mm->page_table_lock);
+
 	flush_tlb_range(current->mm, beg, end);
 	return error;
 }

arch/sparc64/mm/init.c

@@ -66,9 +66,9 @@ int do_check_pgt_cache(int low, int high)
 				free_pgd_slow(get_pgd_fast()), freed++;
 #endif
 			if (pte_quicklist[0])
-				free_pte_slow(pte_alloc_one_fast(0)), freed++;
+				free_pte_slow(pte_alloc_one_fast(NULL, 0)), freed++;
 			if (pte_quicklist[1])
-				free_pte_slow(pte_alloc_one_fast(1 << (PAGE_SHIFT + 10))), freed++;
+				free_pte_slow(pte_alloc_one_fast(NULL, 1 << (PAGE_SHIFT + 10))), freed++;
 		} while (pgtable_cache_size > low);
 	}
 #ifndef CONFIG_SMP 
@@ -904,7 +904,7 @@ struct pgtable_cache_struct pgt_quicklists;
  *	3) Process faults back in the page, the old pre-dirtied copy
  *	   is provided and here is the corruption.
  */
-pte_t *pte_alloc_one(unsigned long address)
+pte_t *pte_alloc_one(struct mm_struct *mm, unsigned long address)
 {
 	struct page *page = alloc_pages(GFP_KERNEL, 1);
 	unsigned long color = ((address >> (PAGE_SHIFT + 10)) & 1UL);

drivers/atm/Makefile

@@ -50,6 +50,9 @@ obj-$(CONFIG_ATM_FORE200E) += fore_200e.o
 
 EXTRA_CFLAGS=-g
 
+list-multi	:= fore_200e.o
+fore_200e-objs	:= fore200e.o $(FORE200E_FW_OBJS)
+
 include $(TOPDIR)/Rules.make
 
 
@@ -82,9 +85,8 @@ fore200e_mkfirm: fore200e_mkfirm.c
 	objcopy -Iihex $< -Obinary $@.gz
 	gzip -df $@.gz
 
-# module build
-fore_200e.o: fore200e.o $(FORE200E_FW_OBJS)
-	$(LD) -r -o $@ $< $(FORE200E_FW_OBJS)
+fore_200e.o: $(fore_200e-objs)
+	$(LD) -r -o $@ $(fore_200e-objs)
 
 # firmware dependency stuff taken from drivers/sound/Makefile
 FORE200E_FW_UP_TO_DATE :=

drivers/cdrom/cdrom.c

@@ -2037,7 +2037,7 @@ static int mmc_ioctl(struct cdrom_device_info *cdi, unsigned int cmd,
 			ret = cdrom_read_block(cdi, &cgc, lba, nr, 1, CD_FRAMESIZE_RAW);
 			if (ret)
 				break;
-			__copy_to_user(ra.buf, cgc.buffer, CD_FRAMESIZE_RAW);
+			__copy_to_user(ra.buf, cgc.buffer, CD_FRAMESIZE_RAW*nr);
 			ra.buf += CD_FRAMESIZE_RAW * nr;
 			ra.nframes -= nr;
 			lba += nr;

drivers/char/agp/Makefile

@@ -7,7 +7,7 @@ O_TARGET	:= agp.o
 
 export-objs := agpgart_be.o
 
-multi-objs := agpgart.o
+list-multi := agpgart.o
 agpgart-objs := agpgart_fe.o agpgart_be.o
 
 obj-$(CONFIG_AGP) += agpgart.o

drivers/char/drm/Makefile

@@ -3,12 +3,10 @@
 # the Direct Rendering Infrastructure (DRI) in XFree86 4.x.
 #
 
-# drm.o is a fake target -- it is never built
-# The real targets are in the module-list
 O_TARGET	:= drm.o
 
-module-list     := gamma.o tdfx.o r128.o ffb.o mga.o i810.o
-export-objs     := $(patsubst %.o,%_drv.o,$(module-list))
+export-objs     := gamma_drv.o tdfx_drv.o r128_drv.o ffb_drv.o mga_drv.o \
+		   i810_drv.o
 
 # lib-objs are included in every module so that radical changes to the
 # architecture of the DRM support library can be made at a later time.
@@ -42,6 +40,7 @@ else
  endif
 endif
 
+list-multi  := gamma.o tdfx.o r128.o ffb.o mga.o i810.o
 gamma-objs  := gamma_drv.o  gamma_dma.o
 tdfx-objs   := tdfx_drv.o                 tdfx_context.o
 r128-objs   := r128_drv.o   r128_cce.o    r128_context.o r128_bufs.o r128_state.o

drivers/char/lp.c

@@ -135,8 +135,8 @@
 #include <asm/uaccess.h>
 #include <asm/system.h>
 
-/* if you have more than 3 printers, remember to increase LP_NO */
-#define LP_NO 3
+/* if you have more than 8 printers, remember to increase LP_NO */
+#define LP_NO 8
 
 /* ROUND_UP macro from fs/select.c */
 #define ROUND_UP(x,y) (((x)+(y)-1)/(y))
@@ -344,26 +344,7 @@ static ssize_t lp_read(struct file * file, char * buf,
 		return -EINTR;
 
 	parport_claim_or_block (lp_table[minor].dev);
-
-	for (;;) {
 	retval = parport_read (port, kbuf, count);
-
-		if (retval)
-			break;
-
-		if (file->f_flags & O_NONBLOCK)
-			break;
-
-		/* Wait for an interrupt. */
-		interruptible_sleep_on_timeout (&lp_table[minor].waitq,
-						LP_TIMEOUT_POLLED);
-
-		if (signal_pending (current)) {
-			retval = -EINTR;
-			break;
-		}
-	}
-
 	parport_release (lp_table[minor].dev);
 
 	if (retval > 0 && copy_to_user (buf, kbuf, retval))

drivers/fc4/Makefile

@@ -14,7 +14,7 @@ obj-$(CONFIG_FC4) += fc4.o
 obj-$(CONFIG_FC4_SOC) += soc.o
 obj-$(CONFIG_FC4_SOCAL) += socal.o
 
+include $(TOPDIR)/Rules.make
+
 fc4.o: $(fc4-objs)
 	$(LD) -r -o $@ $(fc4-objs)
-
-include $(TOPDIR)/Rules.make

drivers/isdn/Config.in

@@ -76,10 +76,9 @@ if [ "$CONFIG_ISDN_DRV_HISAX" != "n" ]; then
 	 bool '  Am7930' CONFIG_HISAX_AMD7930
       fi
    fi
-fi
-
-dep_tristate 'Sedlbauer PCMCIA cards' CONFIG_HISAX_SEDLBAUER_CS $CONFIG_PCMCIA
 
+   dep_tristate '  Sedlbauer PCMCIA cs module' CONFIG_HISAX_SEDLBAUER_CS $CONFIG_PCMCIA
+fi
 endmenu
 
 ### Active ISDN cards

drivers/isdn/hisax/Makefile

@@ -34,7 +34,6 @@ hisax-objs-$(CONFIG_HISAX_DIEHLDIVA) += diva.o isac.o arcofi.o hscx.o
 hisax-objs-$(CONFIG_HISAX_ASUSCOM) += asuscom.o isac.o arcofi.o hscx.o
 hisax-objs-$(CONFIG_HISAX_TELEINT) += teleint.o isac.o arcofi.o hfc_2bs0.o
 hisax-objs-$(CONFIG_HISAX_SEDLBAUER) += sedlbauer.o isac.o arcofi.o hscx.o isar.o
-hisax-objs-$(CONFIG_HISAX_SEDLBAUER_CS) += sedlbauer_cs.o
 hisax-objs-$(CONFIG_HISAX_SPORTSTER) += sportster.o isac.o arcofi.o hscx.o
 hisax-objs-$(CONFIG_HISAX_MIC) += mic.o isac.o arcofi.o hscx.o
 hisax-objs-$(CONFIG_HISAX_NETJET) += nj_s.o netjet.o isac.o arcofi.o
@@ -56,6 +55,7 @@ hisax-objs += $(sort $(hisax-objs-y))
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_ISDN_DRV_HISAX)		+= hisax.o
+obj-$(CONFIG_HISAX_SEDLBAUER_CS)	+= sedlbauer_cs.o
 
 MD5FILES 	:= isac.c isdnl1.c isdnl2.c isdnl3.c \
 		   tei.c callc.c cert.c l3dss1.c l3_1tr6.c \

drivers/isdn/hisax/callc.c

-/* $Id: callc.c,v 2.51.6.1 2001/02/16 16:43:25 kai Exp $
+/* $Id: callc.c,v 2.51.6.2 2001/03/13 16:17:08 kai Exp $
  *
  * Author       Karsten Keil (keil@isdn4linux.de)
  *              based on the teles driver from Jan den Ouden
@@ -20,7 +20,7 @@
 #define MOD_USE_COUNT ( GET_USE_COUNT (&__this_module))
 #endif	/* MODULE */
 
-const char *lli_revision = "$Revision: 2.51.6.1 $";
+const char *lli_revision = "$Revision: 2.51.6.2 $";
 
 extern struct IsdnCard cards[];
 extern int nrcards;

drivers/isdn/hisax/config.c

-/* $Id: config.c,v 2.57.6.10 2001/02/16 16:43:25 kai Exp $
+/* $Id: config.c,v 2.57.6.11 2001/03/13 16:17:08 kai Exp $
  *
  * Author       Karsten Keil (keil@isdn4linux.de)
  *              based on the teles driver from Jan den Ouden

drivers/isdn/hisax/icc.c

-// $Id: icc.c,v 1.5.6.1 2001/02/16 16:43:27 kai Exp $
+// $Id: icc.c,v 1.5.6.2 2001/03/13 16:17:08 kai Exp $
 //-----------------------------------------------------------------------------
 //
 // ICC specific routines

drivers/isdn/hisax/icc.h

-// $Id: icc.h,v 1.2.6.1 2001/02/16 16:43:27 kai Exp $
+// $Id: icc.h,v 1.2.6.2 2001/03/13 16:17:08 kai Exp $
 //-----------------------------------------------------------------------------
 //
 // ICC specific routines

drivers/isdn/hisax/q931.c

-/* $Id: q931.c,v 1.10.6.1 2001/02/16 16:43:28 kai Exp $
+/* $Id: q931.c,v 1.10.6.2 2001/03/13 16:17:08 kai Exp $
  *
  * q931.c       code to decode ITU Q.931 call control messages
  *

drivers/isdn/hysdn/boardergo.c

-/* $Id: boardergo.c,v 1.5.6.2 2001/02/16 16:43:30 kai Exp $
+/* $Id: boardergo.c,v 1.5.6.3 2001/03/13 16:17:09 kai Exp $
 
  * Linux driver for HYSDN cards, specific routines for ergo type boards.
  *

drivers/isdn/hysdn/hysdn_boot.c

-/* $Id: hysdn_boot.c,v 1.4.6.2 2001/02/16 16:43:30 kai Exp $
+/* $Id: hysdn_boot.c,v 1.4.6.3 2001/03/13 16:17:09 kai Exp $
 
  * Linux driver for HYSDN cards, specific routines for booting and pof handling.
  *

drivers/isdn/hysdn/hysdn_procconf.c

-/* $Id: hysdn_procconf.c,v 1.8 2000/11/13 22:51:47 kai Exp $
+/* $Id: hysdn_procconf.c,v 1.8.6.1 2001/03/13 16:17:09 kai Exp $
 
  * Linux driver for HYSDN cards, /proc/net filesystem dir and conf functions.
  * written by Werner Cornelius (werner@titro.de) for Hypercope GmbH
@@ -31,7 +31,7 @@
 
 #include "hysdn_defs.h"
 
-static char *hysdn_procconf_revision = "$Revision: 1.8 $";
+static char *hysdn_procconf_revision = "$Revision: 1.8.6.1 $";
 
 #define INFO_OUT_LEN 80		/* length of info line including lf */
 

drivers/isdn/hysdn/hysdn_sched.c

-/* $Id: hysdn_sched.c,v 1.5 2000/11/22 17:13:13 kai Exp $
+/* $Id: hysdn_sched.c,v 1.5.6.1 2001/03/13 16:17:09 kai Exp $
 
  * Linux driver for HYSDN cards, scheduler routines for handling exchange card <-> pc.
  *

drivers/isdn/sc/interrupt.c

 /*
- *  $Id: interrupt.c,v 1.4 1998/01/31 22:10:52 keil Exp $
+ *  $Id: interrupt.c,v 1.4.8.1 2001/03/13 16:17:09 kai Exp $
  *  Copyright (C) 1996  SpellCaster Telecommunications Inc.
  *
  *  This program is free software; you can redistribute it and/or modify

drivers/net/Makefile

@@ -15,8 +15,9 @@ O_TARGET := net.o
 # All of the (potential) objects that export symbols.
 # This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
 
-export-objs     :=	8390.o arlan.o aironet4500_core.o aironet4500_card.o ppp_async.o \
-			ppp_generic.o slhc.o pppox.o auto_irq.o
+export-objs     :=	8390.o arlan.o aironet4500_core.o aironet4500_card.o \
+			ppp_async.o ppp_generic.o slhc.o pppox.o auto_irq.o \
+			net_init.o
 
 ifeq ($(CONFIG_TULIP),y)
   obj-y += tulip/tulip.o

drivers/parport/parport_pc.c

@@ -1691,11 +1691,6 @@ static int __devinit parport_ECP_supported(struct parport *pb)
 		config & 0x80 ? "Level" : "Pulses");
 
 	configb = inb (CONFIGB (pb));
-	if (!(configb & 0x40)) {
-		printk (KERN_WARNING "0x%lx: possible IRQ conflict!\n",
-			pb->base);
-		pb->irq = PARPORT_IRQ_NONE;
-	}
 	printk (KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",
 		pb->base, config, configb);
         printk (KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);

drivers/parport/share.c

@@ -810,6 +810,10 @@ void parport_unregister_device(struct pardevice *dev)
 struct parport *parport_find_number (int number)
 {
 	struct parport *port, *result = NULL;
+
+	if (!portlist)
+		get_lowlevel_driver ();
+
 	spin_lock (&parportlist_lock);
 	for (port = portlist; port; port = port->next)
 		if (port->number == number) {
@@ -835,6 +839,10 @@ struct parport *parport_find_number (int number)
 struct parport *parport_find_base (unsigned long base)
 {
 	struct parport *port, *result = NULL;
+
+	if (!portlist)
+		get_lowlevel_driver ();
+
 	spin_lock (&parportlist_lock);
 	for (port = portlist; port; port = port->next)
 		if (port->base == base) {

drivers/pcmcia/Makefile

@@ -12,7 +12,7 @@ O_TARGET := pcmcia.o
 
 export-objs := ds.o cs.o cb_enabler.o yenta.o pci_socket.o
 
-multi-list = pcmcia_core.o yenta_socket.o
+list-multi := pcmcia_core.o yenta_socket.o
 
 yenta_socket-objs := pci_socket.o yenta.o
 pcmcia_core-objs := cistpl.o rsrc_mgr.o bulkmem.o cs.o

drivers/pnp/Makefile

@@ -11,7 +11,7 @@
 O_TARGET := pnp.o
 
 export-objs := isapnp.o
-multi-objs := isa-pnp.o
+list-multi := isa-pnp.o
 
 proc-$(CONFIG_PROC_FS) = isapnp_proc.o
 isa-pnp-objs := isapnp.o quirks.o $(proc-y)

drivers/sbus/char/envctrl.c

-/* $Id: envctrl.c,v 1.21 2001/02/13 04:07:38 davem Exp $
+/* $Id: envctrl.c,v 1.22 2001/03/25 09:12:15 davem Exp $
  * envctrl.c: Temperature and Fan monitoring on Machines providing it.
  *
  * Copyright (C) 1998  Eddie C. Dost  (ecd@skynet.be)
@@ -984,6 +984,17 @@ static int __init envctrl_init(void)
 	struct linux_ebus_child *edev_child = NULL;
 	int i = 0;
 
+	for_each_ebus(ebus) {
+		for_each_ebusdev(edev, ebus) {
+			if (!strcmp(edev->prom_name, "bbc")) {
+				/* If we find a boot-bus controller node,
+				 * then this envctrl driver is not for us.
+				 */
+				return -ENODEV;
+			}
+		}
+	}
+
 	/* Traverse through ebus and ebus device list for i2c device and
 	 * adc and gpio nodes.
 	 */

drivers/scsi/Makefile

@@ -26,7 +26,6 @@ else
 endif
 
 export-objs	:= scsi_syms.o
-list-multi	:= scsi_mod.o initio.o a100u2w.o
 
 CFLAGS_aha152x.o =   -DAHA152X_STAT -DAUTOCONF
 CFLAGS_gdth.o    = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ -DGDTH_STATISTICS
@@ -126,12 +125,13 @@ obj-$(CONFIG_BLK_DEV_SD)	+= sd_mod.o
 obj-$(CONFIG_BLK_DEV_SR)	+= sr_mod.o
 obj-$(CONFIG_CHR_DEV_SG)	+= sg.o
 
+list-multi	:= scsi_mod.o sd_mod.o sr_mod.o initio.o a100u2w.o
 scsi_mod-objs	:= scsi.o hosts.o scsi_ioctl.o constants.o \
 			scsicam.o scsi_proc.o scsi_error.o \
 			scsi_obsolete.o scsi_queue.o scsi_lib.o \
 			scsi_merge.o scsi_dma.o scsi_scan.o \
 			scsi_syms.o
-			
+sd_mod-objs	:= sd.o
 sr_mod-objs	:= sr.o sr_ioctl.o sr_vendor.o
 initio-objs	:= ini9100u.o i91uscsi.o
 a100u2w-objs	:= inia100.o i60uscsi.o
@@ -142,8 +142,8 @@ include $(TOPDIR)/Rules.make
 scsi_mod.o: $(scsi_mod-objs)
 	$(LD) -r -o $@ $(scsi_mod-objs)
 
-sd_mod.o: sd.o
-	$(LD) -r -o $@ sd.o
+sd_mod.o: $(sd_mod-objs)
+	$(LD) -r -o $@ $(sd_mod-objs)
 
 sr_mod.o: $(sr_mod-objs)
 	$(LD) -r -o $@ $(sr_mod-objs)

drivers/scsi/pcmcia/Makefile

@@ -21,17 +21,17 @@ obj-$(CONFIG_PCMCIA_FDOMAIN)	+= fdomain_cs.o
 obj-$(CONFIG_PCMCIA_AHA152X)	+= aha152x_cs.o
 
 list-multi	:= qlogic_cs.o fdomain_cs.o aha152x_cs.o
-aha152x-objs	:= aha152x_stub.o aha152x.o
-fdomain-objs	:= fdomain_stub.o fdomain.o
-qlogic-objs	:= qlogic_stub.o qlogicfas.o
+aha152x_cs-objs	:= aha152x_stub.o aha152x.o
+fdomain_cs-objs	:= fdomain_stub.o fdomain.o
+qlogic_cs-objs	:= qlogic_stub.o qlogicfas.o
 
 include $(TOPDIR)/Rules.make
 
-aha152x_cs.o: $(aha152x-objs)
-	$(LD) -r -o $@ $(aha152x-objs)
+aha152x_cs.o: $(aha152x_cs-objs)
+	$(LD) -r -o $@ $(aha152x_cs-objs)
 
-fdomain_cs.o: $(fdomain-objs)
-	$(LD) -r -o $@ $(fdomain-objs)
+fdomain_cs.o: $(fdomain_cs-objs)
+	$(LD) -r -o $@ $(fdomain_cs-objs)
 
-qlogic_cs.o: $(qlogic-objs)
-	$(LD) -r -o $@ $(qlogic-objs)
+qlogic_cs.o: $(qlogic_cs-objs)
+	$(LD) -r -o $@ $(qlogic_cs-objs)

fs/iobuf.c

@@ -55,7 +55,7 @@ int alloc_kiovec(int nr, struct kiobuf **bufp)
 			return -ENOMEM;
 		}
 		kiobuf_init(iobuf);
-		*bufp++ = iobuf;
+		bufp[i] = iobuf;
 	}
 	
 	return 0;

fs/reiserfs/inode.c

@@ -304,6 +304,7 @@ static int _get_block_create_0 (struct inode * inode, long block,
     char * p = NULL;
     int chars;
     int ret ;
+    int done = 0 ;
     unsigned long offset ;
 
     // prepare the key to look for the 'block'-th block of file
@@ -355,6 +356,14 @@ static int _get_block_create_0 (struct inode * inode, long block,
 	return -ENOENT;
     }
 
+    /* if we've got a direct item, and the buffer was uptodate,
+    ** we don't want to pull data off disk again.  skip to the
+    ** end, where we map the buffer and return
+    */
+    if (buffer_uptodate(bh_result)) {
+        goto finished ;
+    }
+
     // read file tail into part of page
     offset = (cpu_key_k_offset(&key) - 1) & (PAGE_CACHE_SIZE - 1) ;
     fs_gen = get_generation(inode->i_sb) ;
@@ -375,8 +384,24 @@ static int _get_block_create_0 (struct inode * inode, long block,
 	if (!is_direct_le_ih (ih)) {
 	    BUG ();
         }
+	/* make sure we don't read more bytes than actually exist in
+	** the file.  This can happen in odd cases where i_size isn't
+	** correct, and when direct item padding results in a few 
+	** extra bytes at the end of the direct item
+	*/
+        if ((le_ih_k_offset(ih) + path.pos_in_item) > inode->i_size)
+	    break ;
+	if ((le_ih_k_offset(ih) - 1 + ih_item_len(ih)) > inode->i_size) {
+	    chars = inode->i_size - (le_ih_k_offset(ih) - 1) - path.pos_in_item;
+	    done = 1 ;
+	} else {
 	    chars = le16_to_cpu (ih->ih_item_len) - path.pos_in_item;
+	}
 	memcpy (p, B_I_PITEM (bh, ih) + path.pos_in_item, chars);
+
+	if (done) 
+	    break ;
+
 	p += chars;
 
 	if (PATH_LAST_POSITION (&path) != (B_NR_ITEMS (bh) - 1))
@@ -395,16 +420,14 @@ static int _get_block_create_0 (struct inode * inode, long block,
 	ih = get_ih (&path);
     } while (1);
 
+finished:
     pathrelse (&path);
-    
-    // FIXME: b_blocknr == 0 here. but b_data contains correct data
-    // from tail. ll_rw_block will skip uptodate buffers
     bh_result->b_blocknr = 0 ;
     bh_result->b_dev = inode->i_dev;
     mark_buffer_uptodate (bh_result, 1);
     bh_result->b_state |= (1UL << BH_Mapped);
+    flush_dcache_page(bh_result->b_page) ;
     kunmap(bh_result->b_page) ;
-
     return 0;
 }
 
@@ -1567,8 +1590,9 @@ void reiserfs_truncate_file(struct inode *p_s_inode, int update_timestamps) {
     /* so, if page != NULL, we have a buffer head for the offset at 
     ** the end of the file. if the bh is mapped, and bh->b_blocknr != 0, 
     ** then we have an unformatted node.  Otherwise, we have a direct item, 
-    ** and no zeroing is required.  We zero after the truncate, because the 
-    ** truncate might pack the item anyway (it will unmap bh if it packs).
+    ** and no zeroing is required on disk.  We zero after the truncate, 
+    ** because the truncate might pack the item anyway 
+    ** (it will unmap bh if it packs).
     */
     prevent_flush_page_lock(page, p_s_inode) ;
     journal_begin(&th, p_s_inode->i_sb,  JOURNAL_PER_BALANCE_CNT * 2 ) ;
@@ -1578,7 +1602,7 @@ void reiserfs_truncate_file(struct inode *p_s_inode, int update_timestamps) {
     journal_end(&th, p_s_inode->i_sb,  JOURNAL_PER_BALANCE_CNT * 2 ) ;
     allow_flush_page_lock(page, p_s_inode) ;
 
-    if (page && buffer_mapped(bh) && bh->b_blocknr != 0) {
+    if (page) {
         length = offset & (blocksize - 1) ;
 	/* if we are not on a block boundary */
 	if (length) {
@@ -1586,14 +1610,14 @@ void reiserfs_truncate_file(struct inode *p_s_inode, int update_timestamps) {
 	    memset((char *)kmap(page) + offset, 0, length) ;   
 	    flush_dcache_page(page) ;
 	    kunmap(page) ;
+	    if (buffer_mapped(bh) && bh->b_blocknr != 0) {
 	        mark_buffer_dirty(bh) ;
 	    }
 	}
-
-    if (page) {
 	UnlockPage(page) ;
 	page_cache_release(page) ;
     }
+
     return ;
 }
 
@@ -1646,6 +1670,7 @@ static int map_block_for_writepage(struct inode *inode,
 	    goto out ;
 	}
 	set_block_dev_mapped(bh_result, le32_to_cpu(item[pos_in_item]), inode);
+	mark_buffer_uptodate(bh_result, 1);
     } else if (is_direct_le_ih(ih)) {
         char *p ; 
         p = page_address(bh_result->b_page) ;
@@ -1665,6 +1690,7 @@ static int map_block_for_writepage(struct inode *inode,
 	journal_mark_dirty(&th, inode->i_sb, bh) ;
 	bytes_copied += copy_size ;
 	set_block_dev_mapped(bh_result, 0, inode);
+	mark_buffer_uptodate(bh_result, 1);
 
 	/* are there still bytes left? */
         if (bytes_copied < bh_result->b_size && 

include/asm-i386/pgalloc.h

@@ -11,7 +11,7 @@
 #define pte_quicklist (current_cpu_data.pte_quick)
 #define pgtable_cache_size (current_cpu_data.pgtable_cache_sz)
 
-#define pmd_populate(pmd, pte) \
+#define pmd_populate(mm, pmd, pte) \
 		set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte)))
 
 /*
@@ -94,7 +94,7 @@ extern __inline__ void free_pgd_slow(pgd_t *pgd)
 #endif
 }
 
-static inline pte_t *pte_alloc_one(unsigned long address)
+static inline pte_t *pte_alloc_one(struct mm_struct *mm, unsigned long address)
 {
 	pte_t *pte;
 
@@ -104,7 +104,7 @@ static inline pte_t *pte_alloc_one(unsigned long address)
 	return pte;
 }
 
-static inline pte_t *pte_alloc_one_fast(unsigned long address)
+static inline pte_t *pte_alloc_one_fast(struct mm_struct *mm, unsigned long address)
 {
 	unsigned long *ret;
 
@@ -138,12 +138,12 @@ extern __inline__ void pte_free_slow(pte_t *pte)
  * (In the PAE case we free the pmds as part of the pgd.)
  */
 
-#define pmd_alloc_one_fast()		({ BUG(); ((pmd_t *)1); })
-#define pmd_alloc_one()			({ BUG(); ((pmd_t *)2); })
+#define pmd_alloc_one_fast(mm, addr)	({ BUG(); ((pmd_t *)1); })
+#define pmd_alloc_one(mm, addr)		({ BUG(); ((pmd_t *)2); })
 #define pmd_free_slow(x)		do { } while (0)
 #define pmd_free_fast(x)		do { } while (0)
 #define pmd_free(x)			do { } while (0)
-#define pgd_populate(pmd, pte)		BUG()
+#define pgd_populate(mm, pmd, pte)	BUG()
 
 extern int do_check_pgt_cache(int, int);
 

include/asm-ppc/pgalloc.h

@@ -93,12 +93,12 @@ extern __inline__ void free_pgd_slow(pgd_t *pgd)
  * We don't have any real pmd's, and this code never triggers because
  * the pgd will always be present..
  */
-#define pmd_alloc_one_fast()            ({ BUG(); ((pmd_t *)1); })
-#define pmd_alloc_one()                 ({ BUG(); ((pmd_t *)2); })
+#define pmd_alloc_one_fast(mm, address) ({ BUG(); ((pmd_t *)1); })
+#define pmd_alloc_one(mm,address)       ({ BUG(); ((pmd_t *)2); })
 #define pmd_free(x)                     do { } while (0)
-#define pgd_populate(pmd, pte)          BUG()
+#define pgd_populate(mm, pmd, pte)      BUG()
 
-static inline pte_t *pte_alloc_one(unsigned long address)
+static inline pte_t *pte_alloc_one(struct mm_struct *mm, unsigned long address)
 {
 	pte_t *pte;
 	extern int mem_init_done;
@@ -113,7 +113,7 @@ static inline pte_t *pte_alloc_one(unsigned long address)
 	return pte;
 }
 
-static inline pte_t *pte_alloc_one_fast(unsigned long address)
+static inline pte_t *pte_alloc_one_fast(struct mm_struct *mm, unsigned long address)
 {
         unsigned long *ret;
 
@@ -139,7 +139,7 @@ extern __inline__ void pte_free_slow(pte_t *pte)
 
 #define pte_free(pte)    pte_free_slow(pte)
 
-#define pmd_populate(pmd, pte)	(pmd_val(*(pmd)) = (unsigned long) (pte))
+#define pmd_populate(mm, pmd, pte)	(pmd_val(*(pmd)) = (unsigned long) (pte))
 
 extern int do_check_pgt_cache(int, int);
 

include/asm-sparc64/elf.h

@@ -79,9 +79,9 @@ do {	unsigned char flags = current->thread.flags;	\
 		if (flags & SPARC_FLAG_32BIT) {		\
 		  pgd_t *pgd0 = &current->mm->pgd[0];	\
 		  if (pgd_none (*pgd0)) {		\
-		    pmd_t *page = pmd_alloc_one_fast();	\
+		    pmd_t *page = pmd_alloc_one_fast(NULL, 0);	\
 		    if (!page)				\
-		      page = pmd_alloc_one();		\
+		      page = pmd_alloc_one(NULL, 0);	\
                     pgd_set(pgd0, page);		\
 		  }					\
 		  pgd_cache = pgd_val(*pgd0) << 11UL;	\

include/asm-sparc64/pgalloc.h

@@ -227,9 +227,9 @@ extern __inline__ void free_pgd_slow(pgd_t *pgd)
 
 #endif /* CONFIG_SMP */
 
-#define pgd_populate(PGD, PMD)	pgd_set(PGD, PMD)
+#define pgd_populate(MM, PGD, PMD)	pgd_set(PGD, PMD)
 
-extern __inline__ pmd_t *pmd_alloc_one(void)
+extern __inline__ pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
 {
 	pmd_t *pmd = (pmd_t *)__get_free_page(GFP_KERNEL);
 	if (pmd)
@@ -237,7 +237,7 @@ extern __inline__ pmd_t *pmd_alloc_one(void)
 	return pmd;
 }
 
-extern __inline__ pmd_t *pmd_alloc_one_fast(void)
+extern __inline__ pmd_t *pmd_alloc_one_fast(struct mm_struct *mm, unsigned long address)
 {
 	unsigned long *ret;
 	int color = 0;
@@ -267,11 +267,11 @@ extern __inline__ void free_pmd_slow(pmd_t *pmd)
 	free_page((unsigned long)pmd);
 }
 
-#define pmd_populate(PMD, PTE)	pmd_set(PMD, PTE)
+#define pmd_populate(MM, PMD, PTE)	pmd_set(PMD, PTE)
 
-extern pte_t *pte_alloc_one(unsigned long address);
+extern pte_t *pte_alloc_one(struct mm_struct *mm, unsigned long address);
 
-extern __inline__ pte_t *pte_alloc_one_fast(unsigned long address)
+extern __inline__ pte_t *pte_alloc_one_fast(struct mm_struct *mm, unsigned long address)
 {
 	unsigned long color = (address >> (PAGE_SHIFT + 10)) & 0x1UL;
 	unsigned long *ret;

include/linux/b1lli.h

 /*
- * $Id: b1lli.h,v 1.8 1999/07/01 15:26:54 calle Exp $
+ * $Id: b1lli.h,v 1.8.8.1 2001/03/15 09:58:30 kai Exp $
  *
  * ISDN lowlevel-module for AVM B1-card.
  *
  * Copyright 1996 by Carsten Paeth (calle@calle.in-berlin.de)
  *
  * $Log: b1lli.h,v $
+ * Revision 1.8.8.1  2001/03/15 09:58:30  kai
+ * spelling fix
+ *
  * Revision 1.8  1999/07/01 15:26:54  calle
  * complete new version (I love it):
  * + new hardware independed "capi_driver" interface that will make it easy to:
@@ -129,7 +132,7 @@ typedef struct avmb1_extcarddef {
 #define	AVMB1_LOAD_AND_CONFIG	3	/* load image and config to card */
 #define	AVMB1_ADDCARD_WITH_TYPE	4	/* add a new card, with cardtype */
 #define AVMB1_GET_CARDINFO	5	/* get cardtype */
-#define AVMB1_REMOVECARD	6	/* remove a card (usefull for T1) */
+#define AVMB1_REMOVECARD	6	/* remove a card (useful for T1) */
 
 #define	AVMB1_REGISTERCARD_IS_OBSOLETE
 

include/linux/hysdn_if.h

-/* $Id: hysdn_if.h,v 1.1 2000/02/10 19:47:50 werner Exp $
+/* $Id: hysdn_if.h,v 1.1.8.1 2001/03/13 16:17:10 kai Exp $
 
  * Linux driver for HYSDN cards, ioctl definitions shared by hynetmgr and driver.
  * written by Werner Cornelius (werner@titro.de) for Hypercope GmbH
@@ -20,6 +20,9 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  * $Log: hysdn_if.h,v $
+ * Revision 1.1.8.1  2001/03/13 16:17:10  kai
+ * spelling fixes from 2.4.3-pre
+ *
  * Revision 1.1  2000/02/10 19:47:50  werner
  *
  * Initial release

include/linux/isdn_ppp.h

@@ -76,7 +76,7 @@ struct isdn_ppp_comp_data {
  *
  * We use this same struct for the reset entry of the compressor to commu-
  * nicate to its caller how to deal with sending of a Reset Ack. In this
- * case, expra is not used, but other options still apply (supressing
+ * case, expra is not used, but other options still apply (suppressing
  * sending with rsend, appending arbitrary data, etc).
  */
 

mm/memory.c

@@ -1284,10 +1284,10 @@ pmd_t *__pmd_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address)
 	pmd_t *new;
 
 	/* "fast" allocation can happen without dropping the lock.. */
-	new = pmd_alloc_one_fast();
+	new = pmd_alloc_one_fast(mm, address);
 	if (!new) {
 		spin_unlock(&mm->page_table_lock);
-		new = pmd_alloc_one();
+		new = pmd_alloc_one(mm, address);
 		spin_lock(&mm->page_table_lock);
 		if (!new)
 			return NULL;
@@ -1301,7 +1301,7 @@ pmd_t *__pmd_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address)
 			goto out;
 		}
 	}
-	pgd_populate(pgd, new);
+	pgd_populate(mm, pgd, new);
 out:
 	return pmd_offset(pgd, address);
 }
@@ -1318,10 +1318,10 @@ pte_t *pte_alloc(struct mm_struct *mm, pmd_t *pmd, unsigned long address)
 		pte_t *new;
 
 		/* "fast" allocation can happen without dropping the lock.. */
-		new = pte_alloc_one_fast(address);
+		new = pte_alloc_one_fast(mm, address);
 		if (!new) {
 			spin_unlock(&mm->page_table_lock);
-			new = pte_alloc_one(address);
+			new = pte_alloc_one(mm, address);
 			spin_lock(&mm->page_table_lock);
 			if (!new)
 				return NULL;
@@ -1335,7 +1335,7 @@ pte_t *pte_alloc(struct mm_struct *mm, pmd_t *pmd, unsigned long address)
 				goto out;
 			}
 		}
-		pmd_populate(pmd, new);
+		pmd_populate(mm, pmd, new);
 	}
 out:
 	return pte_offset(pmd, address);

mm/mmap.c

@@ -204,6 +204,9 @@ unsigned long do_mmap_pgoff(struct file * file, unsigned long addr, unsigned lon
 	int correct_wcount = 0;
 	int error;
 
+	if (file && (!file->f_op || !file->f_op->mmap))
+		return -ENODEV;
+
 	if ((len = PAGE_ALIGN(len)) == 0)
 		return addr;
 
@@ -245,9 +248,6 @@ unsigned long do_mmap_pgoff(struct file * file, unsigned long addr, unsigned lon
 	}
 
 	if (file) {
-		if (!file->f_op || !file->f_op->mmap)
-			return -ENODEV;
-
 		switch (flags & MAP_TYPE) {
 		case MAP_SHARED:
 			if ((prot & PROT_WRITE) && !(file->f_mode & FMODE_WRITE))

net/atm/Makefile

@@ -7,16 +7,14 @@
 #
 # Note 2! The CFLAGS definition is now in the main makefile...
 
-include ../../.config
+O_TARGET	:= atm.o
 
-O_TARGET= atm.o
+export-objs 	:= common.o atm_misc.o raw.o resources.o ipcommon.o proc.o
 
-export-objs = common.o atm_misc.o raw.o resources.o ipcommon.o proc.o
+list-multi	:= mpoa.o
+mpoa-objs	:= mpc.o mpoa_caches.o mpoa_proc.o
 
-multi-list = mpoa.o
-mpoa-objs = mpc.o mpoa_caches.o mpoa_proc.o
-
-obj-$(CONFIG_ATM) = addr.o pvc.o signaling.o svc.o common.o atm_misc.o raw.o resources.o
+obj-$(CONFIG_ATM) := addr.o pvc.o signaling.o svc.o common.o atm_misc.o raw.o resources.o
 
 ifeq ($(CONFIG_ATM_CLIP),y)
 obj-y += clip.o

net/ipx/af_ipx.c

@@ -1542,7 +1542,7 @@ static int ipxrtr_route_packet(struct sock *sk, struct sockaddr_ipx *usipx, stru
 	ipx_offset = intrfc->if_ipx_offset;
 	size = sizeof(struct ipxhdr) + len + ipx_offset;
 
-	skb = sock_alloc_send_skb(sk, size, noblock, &err);
+	skb = sock_alloc_send_skb(sk, size, 0, noblock, &err);
 	if (!skb)
 		goto out_put;
 
@@ -2531,7 +2531,6 @@ static struct proto_ops SOCKOPS_WRAPPED(ipx_dgram_ops) = {
 	sendmsg:	ipx_sendmsg,
 	recvmsg:	ipx_recvmsg,
 	mmap:		sock_no_mmap,
-	sendpage:	sock_no_sendpage,
 };
 
 #include <linux/smp_lock.h>

net/irda/ircomm/Makefile

@@ -9,7 +9,7 @@
 
 O_TARGET := ircomm_and_tty.o
 
-multi-objs := ircomm.o ircomm-tty.o
+list-multi := ircomm.o ircomm-tty.o
 ircomm-objs := ircomm_core.o ircomm_event.o ircomm_lmp.o ircomm_ttp.o
 ircomm-tty-objs := ircomm_tty.o ircomm_tty_attach.o ircomm_tty_ioctl.o ircomm_param.o