iio:adc:at91_adc8xx: introduce new atmel adc driver

This driver supports the new version of the Atmel ADC device introduced
with the SAMA5D2 SoC family.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt

+* AT91 SAMA5D2 Analog to Digital Converter (ADC)
+
+Required properties:
+  - compatible: Should be "atmel,sama5d2-adc".
+  - reg: Should contain ADC registers location and length.
+  - interrupts: Should contain the IRQ line for the ADC.
+  - clocks: phandle to device clock.
+  - clock-names: Must be "adc_clk".
+  - vref-supply: Supply used as reference for conversions.
+  - vddana-supply: Supply for the adc device.
+  - atmel,min-sample-rate-hz: Minimum sampling rate, it depends on SoC.
+  - atmel,max-sample-rate-hz: Maximum sampling rate, it depends on SoC.
+  - atmel,startup-time-ms: Startup time expressed in ms, it depends on SoC.
+
+Example:
+
+adc: adc@fc030000 {
+	compatible = "atmel,sama5d2-adc";
+	reg = <0xfc030000 0x100>;
+	interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
+	clocks = <&adc_clk>;
+	clock-names = "adc_clk";
+	atmel,min-sample-rate-hz = <200000>;
+	atmel,max-sample-rate-hz = <20000000>;
+	atmel,startup-time-ms = <4>;
+	vddana-supply = <&vdd_3v3_lp_reg>;
+	vref-supply = <&vdd_3v3_lp_reg>;
+}

drivers/iio/adc/Kconfig

@@ -131,6 +131,17 @@ config AT91_ADC
 	  To compile this driver as a module, choose M here: the module will be
 	  called at91_adc.
 
+config AT91_SAMA5D2_ADC
+	tristate "Atmel AT91 SAMA5D2 ADC"
+	depends on ARCH_AT91
+	depends on INPUT
+	help
+	  Say yes here to build support for Atmel SAMA5D2 ADC which is
+	  available on SAMA5D2 SoC family.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called at91-sama5d2_adc.
+
 config AXP288_ADC
 	tristate "X-Powers AXP288 ADC driver"
 	depends on MFD_AXP20X

drivers/iio/adc/Makefile

@@ -14,6 +14,7 @@ obj-$(CONFIG_AD7793) += ad7793.o
 obj-$(CONFIG_AD7887) += ad7887.o
 obj-$(CONFIG_AD799X) += ad799x.o
 obj-$(CONFIG_AT91_ADC) += at91_adc.o
+obj-$(CONFIG_AT91_SAMA5D2_ADC) += at91-sama5d2_adc.o
 obj-$(CONFIG_AXP288_ADC) += axp288_adc.o
 obj-$(CONFIG_BERLIN2_ADC) += berlin2-adc.o
 obj-$(CONFIG_CC10001_ADC) += cc10001_adc.o