Commit 2820526d authored by Maxime Ripard's avatar Maxime Ripard

drm/vc4: kms: Don't disable the muxing of an active CRTC

The current HVS muxing code will consider the CRTCs in a given state to
setup their muxing in the HVS, and disable the other CRTCs muxes.

However, it's valid to only update a single CRTC with a state, and in this
situation we would mux out a CRTC that was enabled but left untouched by
the new state.

Fix this by setting a flag on the CRTC state when the muxing has been
changed, and only change the muxing configuration when that flag is there.

Fixes: 87ebcd42 ("drm/vc4: crtc: Assign output to channel automatically")
Signed-off-by: default avatarMaxime Ripard <maxime@cerno.tech>
Tested-by: default avatarHoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: default avatarHoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: default avatarThomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120144245.398711-3-maxime@cerno.tech
parent f2df84e0
......@@ -532,6 +532,9 @@ struct vc4_crtc_state {
unsigned int top;
unsigned int bottom;
} margins;
/* Transitional state below, only valid during atomic commits */
bool update_muxing;
};
#define VC4_HVS_CHANNEL_DISABLED ((unsigned int)-1)
......
......@@ -239,10 +239,7 @@ static void vc5_hvs_pv_muxing_commit(struct vc4_dev *vc4,
{
struct drm_crtc_state *crtc_state;
struct drm_crtc *crtc;
unsigned char dsp2_mux = 0;
unsigned char dsp3_mux = 3;
unsigned char dsp4_mux = 3;
unsigned char dsp5_mux = 3;
unsigned char mux;
unsigned int i;
u32 reg;
......@@ -250,50 +247,59 @@ static void vc5_hvs_pv_muxing_commit(struct vc4_dev *vc4,
struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc_state);
struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
if (!crtc_state->active)
if (!vc4_state->update_muxing)
continue;
switch (vc4_crtc->data->hvs_output) {
case 2:
dsp2_mux = (vc4_state->assigned_channel == 2) ? 0 : 1;
break;
case 3:
dsp3_mux = vc4_state->assigned_channel;
break;
case 4:
dsp4_mux = vc4_state->assigned_channel;
break;
case 5:
dsp5_mux = vc4_state->assigned_channel;
break;
default:
break;
}
}
mux = (vc4_state->assigned_channel == 2) ? 0 : 1;
reg = HVS_READ(SCALER_DISPECTRL);
HVS_WRITE(SCALER_DISPECTRL,
(reg & ~SCALER_DISPECTRL_DSP2_MUX_MASK) |
VC4_SET_FIELD(dsp2_mux, SCALER_DISPECTRL_DSP2_MUX));
VC4_SET_FIELD(mux, SCALER_DISPECTRL_DSP2_MUX));
break;
case 3:
if (vc4_state->assigned_channel == VC4_HVS_CHANNEL_DISABLED)
mux = 3;
else
mux = vc4_state->assigned_channel;
reg = HVS_READ(SCALER_DISPCTRL);
HVS_WRITE(SCALER_DISPCTRL,
(reg & ~SCALER_DISPCTRL_DSP3_MUX_MASK) |
VC4_SET_FIELD(dsp3_mux, SCALER_DISPCTRL_DSP3_MUX));
VC4_SET_FIELD(mux, SCALER_DISPCTRL_DSP3_MUX));
break;
case 4:
if (vc4_state->assigned_channel == VC4_HVS_CHANNEL_DISABLED)
mux = 3;
else
mux = vc4_state->assigned_channel;
reg = HVS_READ(SCALER_DISPEOLN);
HVS_WRITE(SCALER_DISPEOLN,
(reg & ~SCALER_DISPEOLN_DSP4_MUX_MASK) |
VC4_SET_FIELD(dsp4_mux, SCALER_DISPEOLN_DSP4_MUX));
VC4_SET_FIELD(mux, SCALER_DISPEOLN_DSP4_MUX));
break;
case 5:
if (vc4_state->assigned_channel == VC4_HVS_CHANNEL_DISABLED)
mux = 3;
else
mux = vc4_state->assigned_channel;
reg = HVS_READ(SCALER_DISPDITHER);
HVS_WRITE(SCALER_DISPDITHER,
(reg & ~SCALER_DISPDITHER_DSP5_MUX_MASK) |
VC4_SET_FIELD(dsp5_mux, SCALER_DISPDITHER_DSP5_MUX));
VC4_SET_FIELD(mux, SCALER_DISPDITHER_DSP5_MUX));
break;
default:
break;
}
}
}
static void
......@@ -789,16 +795,19 @@ static int vc4_pv_muxing_atomic_check(struct drm_device *dev,
struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
unsigned int matching_channels;
if (old_crtc_state->enable && !new_crtc_state->enable) {
hvs_new_state->unassigned_channels |= BIT(old_vc4_crtc_state->assigned_channel);
new_vc4_crtc_state->assigned_channel = VC4_HVS_CHANNEL_DISABLED;
}
if (!new_crtc_state->enable)
/* Nothing to do here, let's skip it */
if (old_crtc_state->enable == new_crtc_state->enable)
continue;
if (new_vc4_crtc_state->assigned_channel != VC4_HVS_CHANNEL_DISABLED)
/* Muxing will need to be modified, mark it as such */
new_vc4_crtc_state->update_muxing = true;
/* If we're disabling our CRTC, we put back our channel */
if (!new_crtc_state->enable) {
hvs_new_state->unassigned_channels |= BIT(old_vc4_crtc_state->assigned_channel);
new_vc4_crtc_state->assigned_channel = VC4_HVS_CHANNEL_DISABLED;
continue;
}
/*
* The problem we have to solve here is that we have
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment