Commit 290f10ae authored by Al Viro's avatar Al Viro

[PATCH] mips: namespace pollution - mem_... -> __mem_... in io.h

A pile of internal functions use only inside mips io.h has names starting
with mem_... and clashing with names in drivers; renamed to __mem_....
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
parent 034d2f5a
......@@ -56,38 +56,38 @@
* variations of functions: non-prefixed ones that preserve the value
* and prefixed ones that preserve byte addresses. The latters are
* typically used for moving raw data between a peripheral and memory (cf.
* string I/O functions), hence the "mem_" prefix.
* string I/O functions), hence the "__mem_" prefix.
*/
#if defined(CONFIG_SWAP_IO_SPACE)
# define ioswabb(x) (x)
# define mem_ioswabb(x) (x)
# define __mem_ioswabb(x) (x)
# ifdef CONFIG_SGI_IP22
/*
* IP22 seems braindead enough to swap 16bits values in hardware, but
* not 32bits. Go figure... Can't tell without documentation.
*/
# define ioswabw(x) (x)
# define mem_ioswabw(x) le16_to_cpu(x)
# define __mem_ioswabw(x) le16_to_cpu(x)
# else
# define ioswabw(x) le16_to_cpu(x)
# define mem_ioswabw(x) (x)
# define __mem_ioswabw(x) (x)
# endif
# define ioswabl(x) le32_to_cpu(x)
# define mem_ioswabl(x) (x)
# define __mem_ioswabl(x) (x)
# define ioswabq(x) le64_to_cpu(x)
# define mem_ioswabq(x) (x)
# define __mem_ioswabq(x) (x)
#else
# define ioswabb(x) (x)
# define mem_ioswabb(x) (x)
# define __mem_ioswabb(x) (x)
# define ioswabw(x) (x)
# define mem_ioswabw(x) cpu_to_le16(x)
# define __mem_ioswabw(x) cpu_to_le16(x)
# define ioswabl(x) (x)
# define mem_ioswabl(x) cpu_to_le32(x)
# define __mem_ioswabl(x) cpu_to_le32(x)
# define ioswabq(x) (x)
# define mem_ioswabq(x) cpu_to_le32(x)
# define __mem_ioswabq(x) cpu_to_le32(x)
#endif
......@@ -417,7 +417,7 @@ __BUILD_MEMORY_SINGLE(bus, bwlq, type, 1)
\
__BUILD_MEMORY_PFX(__raw_, bwlq, type) \
__BUILD_MEMORY_PFX(, bwlq, type) \
__BUILD_MEMORY_PFX(mem_, bwlq, type) \
__BUILD_MEMORY_PFX(__mem_, bwlq, type) \
BUILDIO_MEM(b, u8)
BUILDIO_MEM(w, u16)
......@@ -430,7 +430,7 @@ BUILDIO_MEM(q, u64)
#define BUILDIO_IOPORT(bwlq, type) \
__BUILD_IOPORT_PFX(, bwlq, type) \
__BUILD_IOPORT_PFX(mem_, bwlq, type)
__BUILD_IOPORT_PFX(__mem_, bwlq, type)
BUILDIO_IOPORT(b, u8)
BUILDIO_IOPORT(w, u16)
......@@ -464,7 +464,7 @@ static inline void writes##bwlq(volatile void __iomem *mem, \
const volatile type *__addr = addr; \
\
while (count--) { \
mem_write##bwlq(*__addr, mem); \
__mem_write##bwlq(*__addr, mem); \
__addr++; \
} \
} \
......@@ -475,7 +475,7 @@ static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \
volatile type *__addr = addr; \
\
while (count--) { \
*__addr = mem_read##bwlq(mem); \
*__addr = __mem_read##bwlq(mem); \
__addr++; \
} \
}
......@@ -488,7 +488,7 @@ static inline void outs##bwlq(unsigned long port, const void *addr, \
const volatile type *__addr = addr; \
\
while (count--) { \
mem_out##bwlq(*__addr, port); \
__mem_out##bwlq(*__addr, port); \
__addr++; \
} \
} \
......@@ -499,7 +499,7 @@ static inline void ins##bwlq(unsigned long port, void *addr, \
volatile type *__addr = addr; \
\
while (count--) { \
*__addr = mem_in##bwlq(port); \
*__addr = __mem_in##bwlq(port); \
__addr++; \
} \
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment