Skip to content

L
linux
Commit 29277173 authored by Andrew Morton's avatar Andrew Morton Committed by Linus Torvalds
Browse files
Options

[PATCH] sn: code pruning - a couple of adds due to the clean up 

From: Pat Gefre <pfg@sgi.com>

Mostly code pruning - a couple of adds due to the clean up
parent e9b19b04
Hide whitespace changes
Inline Side-by-side
Showing with 63 additions and 439 deletions
arch/ia64/sn/io/sn2/klconflib.c
View file @ 29277173
......@@ -30,6 +30,7 @@
#define DBG(x...)
#endif /* DEBUG_KLGRAPH */
lboard_t *root_lboard[MAX_COMPACT_NODES];
u64 klgraph_addr[MAX_COMPACT_NODES];
static int hasmetarouter;
......
arch/ia64/sn/io/sn2/ml_iograph.c
View file @ 29277173
......@@ -489,70 +489,6 @@ io_init_xswitch_widgets(vertex_hdl_t xswitchv, cnodeid_t cnode)
}
}
/*
* For each PCI bridge connected to the xswitch, add a link from the
* board's klconfig info to the bridge's hwgraph vertex. This lets
* the FRU analyzer find the bridge without traversing the hardware
* graph and risking hangs.
*/
static void
io_link_xswitch_widgets(vertex_hdl_t xswitchv, cnodeid_t cnodeid)
{
xwidgetnum_t widgetnum;
char pathname[128];
vertex_hdl_t vhdl;
nasid_t nasid, peer_nasid;
lboard_t *board;
/* And its connected hub's nasids */
nasid = COMPACT_TO_NASID_NODEID(cnodeid);
peer_nasid = NODEPDA(cnodeid)->xbow_peer;
/*
* Look for paths matching "<widgetnum>/pci" under xswitchv.
* For every widget, init. its lboard's hwgraph link. If the
* board has a PCI bridge, point the link to it.
*/
for (widgetnum = HUB_WIDGET_ID_MIN; widgetnum <= HUB_WIDGET_ID_MAX;
widgetnum++) {
sprintf(pathname, "%d", widgetnum);
if (hwgraph_traverse(xswitchv, pathname, &vhdl) !=
GRAPH_SUCCESS)
continue;
board = find_lboard_module((lboard_t *)KL_CONFIG_INFO(nasid),
NODEPDA(cnodeid)->geoid);
if (board == NULL && peer_nasid != INVALID_NASID) {
/*
* Try to find the board on our peer
*/
board = find_lboard_module(
(lboard_t *)KL_CONFIG_INFO(peer_nasid),
NODEPDA(cnodeid)->geoid);
}
if (board == NULL) {
printk(KERN_WARNING "Could not find PROM info for vertex 0x%p, "
"FRU analyzer may fail",
(void *)vhdl);
return;
}
/* Check both buses */
sprintf(pathname, "%d/"EDGE_LBL_PCIX_0, widgetnum);
if (hwgraph_traverse(xswitchv, pathname, &vhdl) == GRAPH_SUCCESS)
board->brd_graph_link = vhdl;
else {
sprintf(pathname, "%d/"EDGE_LBL_PCIX_1, widgetnum);
if (hwgraph_traverse(xswitchv, pathname, &vhdl) == GRAPH_SUCCESS)
board->brd_graph_link = vhdl;
else
board->brd_graph_link = GRAPH_VERTEX_NONE;
}
}
}
/*
* Initialize all I/O on the specified node.
*/
......@@ -724,7 +660,6 @@ io_init_node(cnodeid_t cnodeid)
/* Now both nodes can safely inititialize widgets */
io_init_xswitch_widgets(switchv, cnodeid);
io_link_xswitch_widgets(switchv, cnodeid);
DBG("\nio_init_node: DONE INITIALIZED ALL I/O FOR CNODEID %d\n\n", cnodeid);
}
......
arch/ia64/sn/io/sn2/shub_intr.c
View file @ 29277173
......@@ -61,7 +61,6 @@ do_hub_intr_alloc(vertex_hdl_t dev,
iopaddr_t xtalk_addr;
struct xtalk_intr_s *xtalk_info;
xwidget_info_t xwidget_info;
ilvl_t intr_swlevel = 0;
cpu = intr_heuristic(dev, -1, &vector);
if (cpu == CPU_NONE) {
......@@ -94,7 +93,6 @@ do_hub_intr_alloc(vertex_hdl_t dev,
xtalk_info->xi_target = xwidget_info_masterid_get(xwidget_info);
}
intr_hdl->i_swlevel = intr_swlevel;
intr_hdl->i_cpuid = cpu;
intr_hdl->i_bit = vector;
intr_hdl->i_flags |= HUB_INTR_IS_ALLOCED;
......
arch/ia64/sn/kernel/setup.c
View file @ 29277173
......@@ -69,6 +69,8 @@ u64 sn_partition_serial_number;
short physical_node_map[MAX_PHYSNODE_ID];
int numionodes;
/*
* This is the address of the RRegs in the HSpace of the global
* master. It is used by a hack in serial.c (serial_[in|out],
......@@ -302,6 +304,7 @@ void
sn_init_pdas(char **cmdline_p)
{
cnodeid_t cnode;
void scan_for_ionodes(void);
/*
* Make sure that the PDA fits entirely in the same page as the
......@@ -314,6 +317,9 @@ sn_init_pdas(char **cmdline_p)
for (cnode=0; cnode<numnodes; cnode++)
pda->cnodeid_to_nasid_table[cnode] = pxm_to_nasid(nid_to_pxm_map[cnode]);
numionodes = numnodes;
scan_for_ionodes();
/*
* Allocate & initalize the nodepda for each node.
*/
......@@ -415,3 +421,33 @@ sn_cpu_init(void)
bte_init_cpu();
}
/*
* Scan klconfig for ionodes. Add the nasids to the
* physical_node_map and the pda and increment numionodes.
*/
void
scan_for_ionodes(void) {
int nasid = 0;
lboard_t *brd;
/* Setup ionodes with memory */
for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid +=2) {
u64 klgraph_header;
cnodeid_t cnodeid;
if (physical_node_map[nasid] == -1)
continue;
klgraph_header = cnodeid = -1;
klgraph_header = ia64_sn_get_klconfig_addr(nasid);
if (klgraph_header <= 0)
BUG(); /* All nodes must have klconfig tables! */
cnodeid = nasid_to_cnodeid(nasid);
root_lboard[cnodeid] = (lboard_t *)
NODE_OFFSET_TO_LBOARD( (nasid),
((kl_config_hdr_t *)(klgraph_header))->
ch_board_info);
}
}
include/asm-ia64/sn/ioerror_handling.h
View file @ 29277173
......@@ -203,12 +203,6 @@ enum error_priority_e {
typedef uint64_t error_priority_t;
/* Error state interfaces */
#if defined(CONFIG_SGI_IO_ERROR_HANDLING)
extern error_return_code_t error_state_set(vertex_hdl_t,error_state_t);
extern error_state_t error_state_get(vertex_hdl_t);
#endif
/* Error action interfaces */
extern error_return_code_t error_action_set(vertex_hdl_t,
......@@ -231,42 +225,6 @@ hwgraph_info_get_LBL(v, INFO_LBL_ERROR_SKIP_ENV, (arbitrary_info_t *)&l)
#define v_error_skip_env_clear(v) \
hwgraph_info_remove_LBL(v, INFO_LBL_ERROR_SKIP_ENV, 0)
/* REFERENCED */
#if defined(CONFIG_SGI_IO_ERROR_HANDLING)
inline static int
error_skip_point_mark(vertex_hdl_t v)
{
label_t *error_env = NULL;
int code = 0;
/* Check if we have a valid hwgraph vertex */
#ifdef LATER
if (!dev_is_vertex(v))
return(code);
#endif
/* There is no error jump buffer for this device vertex. Allocate
* one.
*/
if (v_error_skip_env_get(v, error_env) != GRAPH_SUCCESS) {
error_env = kmalloc(sizeof(label_t), GFP_KERNEL);
/* Unable to allocate memory for jum buffer. This should
* be a very rare occurrence.
*/
if (!error_env)
return(-1);
memset(error_env, 0, sizeof(label_t));
/* Store the jump buffer information on the vertex.*/
if (v_error_skip_env_set(v, error_env, 0) != GRAPH_SUCCESS)
return(-2);
}
ASSERT(v_error_skip_env_get(v, error_env) == GRAPH_SUCCESS);
code = setjmp(*error_env);
return(code);
}
#endif /* CONFIG_SGI_IO_ERROR_HANDLING */
typedef uint64_t counter_t;
extern counter_t error_retry_count_get(vertex_hdl_t);
......
include/asm-ia64/sn/klconfig.h
View file @ 29277173
......@@ -78,11 +78,6 @@ typedef s32 klconf_off_t;
#define KLINFO_CONTROLLER 0x10 /* This component is a device controller */
#define KLINFO_INSTALL 0x20 /* Install a driver */
#define KLINFO_HEADLESS 0x40 /* Headless (or hubless) component */
#define IS_CONSOLE_IOC3(i) ((((klinfo_t *)i)->flags) & KLINFO_INSTALL)
#define GB2 0x80000000
#define MAX_RSV_PTRS 32
/* Structures to manage various data storage areas */
/* The numbers must be contiguous since the array index i
......@@ -131,41 +126,13 @@ typedef struct kl_config_hdr {
#define KL_CONFIG_HDR(_nasid) ((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid)))
#define KL_CONFIG_INFO_OFFSET(_nasid) \
(KL_CONFIG_HDR(_nasid)->ch_board_info)
#define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off) \
(KL_CONFIG_HDR(_nasid)->ch_board_info = (_off))
#ifndef __ia64
#define KL_CONFIG_INFO(_nasid) \
(lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ? \
NODE_OFFSET_TO_K0((_nasid), KL_CONFIG_HDR(_nasid)->ch_board_info) : \
0)
#else
#define NODE_OFFSET_TO_LBOARD(nasid,off) (lboard_t*)(NODE_CAC_BASE(nasid) + (off))
#define KL_CONFIG_INFO(_nasid) \
(lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ? \
NODE_OFFSET_TO_LBOARD((_nasid), KL_CONFIG_HDR(_nasid)->ch_board_info) : \
NULL)
#endif /* __ia64 */
#define KL_CONFIG_MAGIC(_nasid) (KL_CONFIG_HDR(_nasid)->ch_magic)
#define KL_CONFIG_CHECK_MAGIC(_nasid) \
(KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC)
#define NODE_OFFSET_TO_LBOARD(nasid,off) (lboard_t*)(NODE_CAC_BASE(nasid) + (off))
#define KL_CONFIG_HDR_INIT_MAGIC(_nasid) \
(KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC)
#define KL_CONFIG_INFO(_nasid) root_lboard[nasid_to_cnodeid(_nasid)]
/* --- New Macros for the changed kl_config_hdr_t structure --- */
#define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\
((__psunsigned_t)_k + (_k->ch_malloc_hdr_off)))
#define KL_CONFIG_CH_MALLOC_HDR(_n) PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n))
#define PTR_CH_CONS_INFO(_k) ((console_t *)\
((__psunsigned_t)_k + (_k->ch_cons_off)))
......@@ -173,12 +140,6 @@ typedef struct kl_config_hdr {
/* ------------------------------------------------------------- */
#define KL_CONFIG_INFO_START(_nasid) \
(klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t))
#define KL_CONFIG_BOARD_NASID(_brd) ((_brd)->brd_nasid)
#define KL_CONFIG_BOARD_SET_NEXT(_brd, _off) ((_brd)->brd_next = (_off))
#define KL_CONFIG_DUPLICATE_BOARD(_brd) ((_brd)->brd_flags & DUPLICATE_BOARD)
#define XBOW_PORT_TYPE_HUB(_xbowp, _link) \
......@@ -195,9 +156,6 @@ typedef struct kl_config_hdr {
#define XBOW_PORT_HUB 0x2
#define XBOW_PORT_ENABLE 0x4
#define SN0_PORT_FENCE_SHFT 0
#define SN0_PORT_FENCE_MASK (1 << SN0_PORT_FENCE_SHFT)
/*
* The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD
* can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to
......@@ -291,15 +249,7 @@ typedef struct kl_config_hdr {
*/
/*
* Values for CPU types
*/
#define KL_CPU_R4000 0x1 /* Standard R4000 */
#define KL_CPU_TFP 0x2 /* TFP processor */
#define KL_CPU_R10000 0x3 /* R10000 (T5) */
#define KL_CPU_NONE (-1) /* no cpu present in slot */
/*
* IP27 BOARD classes
* BOARD classes
*/
#define KLCLASS_MASK 0xf0
......@@ -337,14 +287,6 @@ typedef struct kl_config_hdr {
#define KLTYPE_WEIRDCPU (KLCLASS_CPU | 0x0)
#define KLTYPE_SNIA (KLCLASS_CPU | 0x1)
#define KLTYPE_WEIRDIO (KLCLASS_IOBRICK | 0x0)
#define KLTYPE_BASEIO (KLCLASS_IO | 0x1) /* IOC3, SuperIO, Bridge, SCSI */
#define KLTYPE_ETHERNET (KLCLASS_IO | 0x3)
#define KLTYPE_FDDI (KLCLASS_IO | 0x4)
#define KLTYPE_FC (KLCLASS_IO | 0x9)
#define KLTYPE_GSN_A (KLCLASS_IO | 0xC) /* Main GSN board */
#define KLTYPE_GSN_B (KLCLASS_IO | 0xD) /* Auxiliary GSN board */
#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1)
#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3)
#define KLTYPE_REPEATER_ROUTER (KLCLASS_ROUTER | 0x4)
......@@ -357,16 +299,12 @@ typedef struct kl_config_hdr {
#define KLTYPE_OPUSBRICK (KLCLASS_IOBRICK | 0x9)
#define KLTYPE_PBRICK_BRIDGE KLTYPE_PBRICK
/* The value of type should be more than 8 so that hinv prints
* out the board name from the NIC string. For values less than
* 8 the name of the board needs to be hard coded in a few places.
* When bringup started nic names had not standardized and so we
* had to hard code. (For people interested in history.)
*/
#define KLTYPE_XTHD (KLCLASS_PSEUDO_GFX | 0x9)
#define KLTYPE_UNKNOWN (KLCLASS_UNKNOWN | 0xf)
#define KLTYPE(_x) ((_x) & KLTYPE_MASK)
......@@ -377,13 +315,8 @@ typedef struct kl_config_hdr {
#define MAX_COMPTS_PER_BRD 24
#define LOCAL_BOARD 1
#define REMOTE_BOARD 2
#define LBOARD_STRUCT_VERSION 2
typedef struct lboard_s {
klconf_off_t brd_next; /* Next BOARD */
klconf_off_t brd_next_any; /* Next BOARD */
unsigned char struct_type; /* type of structure, local or remote */
unsigned char brd_type; /* type+class */
unsigned char brd_sversion; /* version of this structure */
......@@ -403,15 +336,16 @@ typedef struct lboard_s {
klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */
klconf_off_t brd_errinfo; /* Board's error information */
struct lboard_s *brd_parent; /* Logical parent for this brd */
vertex_hdl_t brd_graph_link; /* vertex hdl to connect extern compts */
char pad0[4];
confidence_t brd_confidence; /* confidence that the board is bad */
nasid_t brd_owner; /* who owns this board */
unsigned char brd_nic_flags; /* To handle 8 more NICs */
char pad[32]; /* future expansion */
char pad1[24]; /* future expansion */
char brd_name[32];
nasid_t brd_next_same_host; /* host of next brd w/same nasid */
klconf_off_t brd_next_same; /* Next BOARD with same nasid */
} lboard_t;
/*
* Make sure we pass back the calias space address for local boards.
* klconfig board traversal and error structure extraction defines.
......@@ -421,33 +355,20 @@ typedef struct lboard_s {
#define KLCF_CLASS(_brd) KLCLASS((_brd)->brd_type)
#define KLCF_TYPE(_brd) KLTYPE((_brd)->brd_type)
#define KLCF_REMOTE(_brd) (((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1)
#define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts)
#define KLCF_MODULE_ID(_brd) ((_brd)->brd_module)
#ifndef __ia64
#define KLCF_NEXT(_brd) ((_brd)->brd_next ? (lboard_t *)((_brd)->brd_next): NULL)
#define KLCF_COMP(_brd, _ndx) \
(klinfo_t *)(NODE_OFFSET_TO_K0(NASID_GET(_brd), \
(_brd)->brd_compts[(_ndx)]))
#define KLCF_COMP_ERROR(_brd, _comp) \
(NODE_OFFSET_TO_K0(NASID_GET(_brd), (_comp)->errinfo))
#else
#define NODE_OFFSET_TO_KLINFO(n,off) ((klinfo_t*) TO_NODE_CAC(n,off))
#define KLCF_NEXT(_brd) \
((_brd)->brd_next ? \
(NODE_OFFSET_TO_LBOARD(NASID_GET(_brd), (_brd)->brd_next)): NULL)
((_brd)->brd_next_same ? \
(NODE_OFFSET_TO_LBOARD((_brd)->brd_next_same_host, (_brd)->brd_next_same)): NULL)
#define KLCF_NEXT_ANY(_brd) \
((_brd)->brd_next_any ? \
(NODE_OFFSET_TO_LBOARD(NASID_GET(_brd), (_brd)->brd_next_any)): NULL)
#define KLCF_COMP(_brd, _ndx) \
((((_brd)->brd_compts[(_ndx)]) == 0) ? 0 : \
(NODE_OFFSET_TO_KLINFO(NASID_GET(_brd), (_brd)->brd_compts[(_ndx)])))
#define KLCF_COMP_ERROR(_brd, _comp) \
(NODE_OFFSET_TO_K0(NASID_GET(_brd), (_comp)->errinfo))
#endif /* __ia64 */
#define KLCF_COMP_TYPE(_comp) ((_comp)->struct_type)
#define KLCF_BRIDGE_W_ID(_comp) ((_comp)->physid) /* Widget ID */
......@@ -496,36 +417,14 @@ typedef struct klinfo_s { /* Generic info */
#define KLSTRUCT_MEMBNK 3
#define KLSTRUCT_XBOW 4
#define KLSTRUCT_BRI 5
#define KLSTRUCT_IOC3 6
#define KLSTRUCT_PCI 7
#define KLSTRUCT_VME 8
#define KLSTRUCT_ROU 9
#define KLSTRUCT_GFX 10
#define KLSTRUCT_SCSI 11
#define KLSTRUCT_FDDI 12
#define KLSTRUCT_MIO 13
#define KLSTRUCT_DISK 14
#define KLSTRUCT_TAPE 15
#define KLSTRUCT_CDROM 16
#define KLSTRUCT_HUB_UART 17
#define KLSTRUCT_IOC3ENET 18
#define KLSTRUCT_IOC3UART 19
#define KLSTRUCT_UNUSED 20 /* XXX UNUSED */
#define KLSTRUCT_IOC3PCKM 21
#define KLSTRUCT_RAD 22
#define KLSTRUCT_HUB_TTY 23
#define KLSTRUCT_IOC3_TTY 24
/* Early Access IO proms are compatible
only with KLSTRUCT values upto 24. */
#define KLSTRUCT_FIBERCHANNEL 25
#define KLSTRUCT_MOD_SERIAL_NUM 26
#define KLSTRUCT_IOC3MS 27
#define KLSTRUCT_TPU 28
#define KLSTRUCT_GSN_A 29
#define KLSTRUCT_GSN_B 30
#define KLSTRUCT_XTHD 31
#define KLSTRUCT_QLFIBRE 32
#define KLSTRUCT_1394 33
#define KLSTRUCT_USB 34
......@@ -535,36 +434,14 @@ typedef struct klinfo_s { /* Generic info */
#define KLSTRUCT_PEBRICK 38
#define KLSTRUCT_GIGE 39
#define KLSTRUCT_IDE 40
#define KLSTRUCT_IOC4 41
#define KLSTRUCT_IOC4UART 42
#define KLSTRUCT_IOC4_TTY 43
#define KLSTRUCT_IOC4PCKM 44
#define KLSTRUCT_IOC4MS 45
#define KLSTRUCT_IOC4_ATA 46
#define KLSTRUCT_PCIGFX 47
/*
* These are the indices of various components within a lboard structure.
*/
#define IP27_CPU0_INDEX 0
#define IP27_CPU1_INDEX 1
#define IP27_HUB_INDEX 2
#define IP27_MEM_INDEX 3
#define BASEIO_BRIDGE_INDEX 0
#define BASEIO_IOC3_INDEX 1
#define BASEIO_SCSI1_INDEX 2
#define BASEIO_SCSI2_INDEX 3
#define MIDPLANE_XBOW_INDEX 0
#define ROUTER_COMPONENT_INDEX 0
#define CH4SCSI_BRIDGE_INDEX 0
/* Info holders for various hardware components */
typedef u64 *pci_t;
typedef u64 *vmeb_t;
typedef u64 *vmed_t;
typedef u64 *fddi_t;
typedef u64 *scsi_t;
typedef u64 *mio_t;
typedef u64 *graphics_t;
typedef u64 *router_t;
/*
* The port info in ip27_cfg area translates to a lboart_t in the
......@@ -621,14 +498,6 @@ typedef struct klmembnk_s { /* MEMORY BANK */
unsigned long pad;
} klmembnk_t ;
#define KLCONFIG_MEMBNK_SIZE(_info, _bank) \
((_info)->membnk_bnksz[(_bank)])
#define MEMBNK_PREMIUM 1
#define KLCONFIG_MEMBNK_PREMIUM(_info, _bank) \
((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank)))
#define MAX_SERIAL_NUM_SIZE 10
typedef struct klmod_serial_num_s {
......@@ -671,42 +540,12 @@ typedef struct klbri_s { /* BRIDGE */
klinfo_t bri_info ;
unsigned char bri_eprominfo ; /* IO6prom connected to bridge */
unsigned char bri_bustype ; /* PCI/VME BUS bridge/GIO */
pci_t pci_specific ; /* PCI Board config info */
u64 *pci_specific ; /* PCI Board config info */
klpci_device_t bri_devices[MAX_PCI_DEVS] ; /* PCI IDs */
klconf_off_t bri_mfg_nic ;
unsigned long pad;
} klbri_t ;
#define MAX_IOC3_TTY 2
typedef struct klioc3_s { /* IOC3 */
klinfo_t ioc3_info ;
unsigned char ioc3_ssram ; /* Info about ssram */
unsigned char ioc3_nvram ; /* Info about nvram */
klinfo_t ioc3_superio ; /* Info about superio */
klconf_off_t ioc3_tty_off ;
klinfo_t ioc3_enet ;
klconf_off_t ioc3_enet_off ;
klconf_off_t ioc3_kbd_off ;
unsigned long pad;
} klioc3_t ;
#define MAX_VME_SLOTS 8
typedef struct klvmeb_s { /* VME BRIDGE - PCI CTLR */
klinfo_t vmeb_info ;
vmeb_t vmeb_specific ;
klconf_off_t vmeb_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */
unsigned long pad;
} klvmeb_t ;
typedef struct klvmed_s { /* VME DEVICE - VME BOARD */
klinfo_t vmed_info ;
vmed_t vmed_specific ;
klconf_off_t vmed_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */
unsigned long pad;
} klvmed_t ;
#define ROUTER_VECTOR_VERS 2
/* XXX - Don't we need the number of ports here?!? */
......@@ -745,23 +584,6 @@ typedef struct klgfx_s { /* GRAPHICS Device */
unsigned long pad;
} klgfx_t;
typedef struct klxthd_s {
klinfo_t xthd_info ;
klconf_off_t xthd_mfg_nic ; /* MFG NIC string */
unsigned long pad;
} klxthd_t ;
typedef struct kltpu_s { /* TPU board */
klinfo_t tpu_info ;
klconf_off_t tpu_mfg_nic ; /* MFG NIC string */
unsigned long pad;
} kltpu_t ;
typedef struct klgsn_s { /* GSN board */
klinfo_t gsn_info ;
klconf_off_t gsn_mfg_nic ; /* MFG NIC string */
} klgsn_t ;
#define MAX_SCSI_DEVS 16
/*
......@@ -799,11 +621,9 @@ typedef struct klttydev_s { /* TTY device */
unsigned long pad;
} klttydev_t ;
typedef struct klenetdev_s { /* ENET device */
klinfo_t enetdev_info ;
struct net_data *enetdev_cfg ; /* driver fills up this */
unsigned long pad;
} klenetdev_t ;
typedef struct klpcigfx_s { /* PCI GFX */
klinfo_t gfx_info ;
} klpcigfx_t ;
typedef struct klkbddev_s { /* KBD device */
klinfo_t kbddev_info ;
......@@ -817,21 +637,6 @@ typedef struct klmsdev_s { /* mouse device */
unsigned long pad;
} klmsdev_t ;
#define MAX_FDDI_DEVS 10 /* XXX Is this true */
typedef struct klfddi_s { /* FDDI */
klinfo_t fddi_info ;
fddi_t fddi_specific ;
klconf_off_t fddi_devinfo[MAX_FDDI_DEVS] ;
unsigned long pad;
} klfddi_t ;
typedef struct klmio_s { /* MIO */
klinfo_t mio_info ;
mio_t mio_specific ;
unsigned long pad;
} klmio_t ;
/*
* USB info
*/
......@@ -864,54 +669,9 @@ typedef union kldev_s { /* for device structure allocation */
klkbddev_t kc_kbd_dev ;
} kldev_t ;
/* Data structure interface routines. TBD */
/* Include launch info in this file itself? TBD */
/*
* TBD - Can the ARCS and device driver related info also be included in the
* KLCONFIG area. On the IO4PROM, prom device driver info is part of cfgnode_t
* structure, viz private to the IO4prom.
*/
/*
* TBD - Allocation issues.
*
* Do we need to Mark off sepatate heaps for lboard_t, rboard_t, component,
* errinfo and allocate from them, or have a single heap and allocate all
* structures from it. Debug is easier in the former method since we can
* dump all similar structs in one command, but there will be lots of holes,
* in memory and max limits are needed for number of structures.
* Another way to make it organized, is to have a union of all components
* and allocate a aligned chunk of memory greater than the biggest
* component.
*/
typedef union {
lboard_t *lbinfo ;
} biptr_t ;
#define BRI_PER_XBOW 6
#define PCI_PER_BRI 8
#define DEV_PER_PCI 16
/* Virtual dipswitch values (starting from switch "7"): */
#define VDS_NOGFX 0x8000 /* Don't enable gfx and autoboot */
#define VDS_NOMP 0x100 /* Don't start slave processors */
#define VDS_MANUMODE 0x80 /* Manufacturing mode */
#define VDS_NOARB 0x40 /* No bootmaster arbitration */
#define VDS_PODMODE 0x20 /* Go straight to POD mode */
#define VDS_NO_DIAGS 0x10 /* Don't run any diags after BM arb */
#define VDS_DEFAULTS 0x08 /* Use default environment values */
#define VDS_NOMEMCLEAR 0x04 /* Don't run mem cfg code */
#define VDS_2ND_IO4 0x02 /* Boot from the second IO4 */
#define VDS_DEBUG_PROM 0x01 /* Print PROM debugging messages */
/* external declarations of Linux kernel functions. */
extern lboard_t *root_lboard[];
extern lboard_t *find_lboard(lboard_t *start, unsigned char type);
extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type);
extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type);
......
include/asm-ia64/sn/pci/pci_defs.h
View file @ 29277173
......@@ -275,16 +275,6 @@ extern void pci_write(void * address, int data, int type);
#define CFG1_DEVICE_SHIFT 11
#define CFG1_BUS_SHIFT 16
#ifdef CONFIG_SGI_IP32
/* Definitions related to IP32 PCI Bridge policy
* XXX- should probaly be moved to a mace-specific header
*/
#define PCI_CONFIG_BITS 0xfe0085ff
#define PCI_CONTROL_MRMRA_ENABLE 0x00000800
#define PCI_FIRST_IO_ADDR 0x1000
#define PCI_IO_MAP_INCR 0x1000
#endif /* CONFIG_SGI_IP32 */
/*
* Class codes
*/
......
include/asm-ia64/sn/sn2/shub.h
View file @ 29277173
/*
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
......
include/asm-ia64/sn/sn2/sn_private.h
View file @ 29277173
......@@ -153,7 +153,6 @@ struct hub_dmamap_s {
*/
struct hub_intr_s {
struct xtalk_intr_s i_xtalk_info; /* standard crosstalk intr info */
ilvl_t i_swlevel; /* software level for blocking intr */
cpuid_t i_cpuid; /* which cpu */
int i_bit; /* which bit */
int i_flags;
......
include/asm-ia64/sn/xtalk/xbow_info.h
View file @ 29277173
......@@ -11,24 +11,6 @@
#include <linux/types.h>
#define XBOW_PERF_MODES 0x03
#define XBOW_PERF_COUNTERS 0x02
#define XBOW_MONITOR_NONE 0x00
#define XBOW_MONITOR_SRC_LINK 0x01
#define XBOW_MONITOR_DEST_LINK 0x02
#define XBOW_MONITOR_INP_PKT 0x03
#define XBOW_MONITOR_MULTIPLEX 0x04
#define XBOW_LINK_MULTIPLEX 0x20
#define XBOW_PERF_TIMEOUT 4
#define XBOW_STATS_TIMEOUT HZ
typedef struct xbow_perf_link {
uint64_t xlp_cumulative[XBOW_PERF_MODES];
unsigned char xlp_link_alive;
} xbow_perf_link_t;
typedef struct xbow_link_status {
uint64_t rx_err_count;
......@@ -36,32 +18,4 @@ typedef struct xbow_link_status {
} xbow_link_status_t;
typedef struct xbow_perf {
uint32_t xp_current;
unsigned char xp_link;
unsigned char xp_mode;
unsigned char xp_curlink;
unsigned char xp_curmode;
volatile uint32_t *xp_perf_reg;
} xbow_perf_t;
extern void xbow_update_perf_counters(vertex_hdl_t);
extern xbow_perf_link_t *xbow_get_perf_counters(vertex_hdl_t);
extern int xbow_enable_perf_counter(vertex_hdl_t, int, int, int);
#define XBOWIOC_PERF_ENABLE 1
#define XBOWIOC_PERF_DISABLE 2
#define XBOWIOC_PERF_GET 3
#define XBOWIOC_LLP_ERROR_ENABLE 4
#define XBOWIOC_LLP_ERROR_DISABLE 5
#define XBOWIOC_LLP_ERROR_GET 6
struct xbow_perfarg_t {
int link;
int mode;
int counter;
};
#endif /* _ASM_SN_XTALK_XBOW_INFO_H */
#endif /* _ASM_IA64_SN_XTALK_XBOW_INFO_H */
include/asm-ia64/sn/xtalk/xtalk_private.h
View file @ 29277173
......@@ -51,12 +51,6 @@ struct xtalk_intr_s {
/*
* Xtalk interrupt handler structure access functions
*/
#define xtalk_intr_arg(xt) ((xt)->xi_sfarg)
#define xwidget_hwid_is_sn0_xswitch(_hwid) \
(((_hwid)->part_num == XBOW_WIDGET_PART_NUM ) && \
((_hwid)->mfg_num == XBOW_WIDGET_MFGR_NUM ))
#define xwidget_hwid_is_sn1_xswitch(_hwid) \
(((_hwid)->part_num == XXBOW_WIDGET_PART_NUM || \
(_hwid)->part_num == PXBOW_WIDGET_PART_NUM) && \
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7