Commit 2ae17f66 authored by Vladislav Zolotarov's avatar Vladislav Zolotarov Committed by David S. Miller

bnx2x: link report improvements

To avoid link notification duplication
Signed-off-by: default avatarDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: default avatarVladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 34da9e50
......@@ -893,6 +893,22 @@ typedef enum {
(&bp->def_status_blk->sp_sb.\
index_values[HC_SP_INDEX_EQ_CONS])
/* This is a data that will be used to create a link report message.
* We will keep the data used for the last link report in order
* to prevent reporting the same link parameters twice.
*/
struct bnx2x_link_report_data {
u16 line_speed; /* Effective line speed */
unsigned long link_report_flags;/* BNX2X_LINK_REPORT_XXX flags */
};
enum {
BNX2X_LINK_REPORT_FD, /* Full DUPLEX */
BNX2X_LINK_REPORT_LINK_DOWN,
BNX2X_LINK_REPORT_RX_FC_ON,
BNX2X_LINK_REPORT_TX_FC_ON,
};
struct bnx2x {
/* Fields used in the tx and intr/napi performance paths
* are grouped together in the beginning of the structure
......@@ -1025,6 +1041,9 @@ struct bnx2x {
struct link_params link_params;
struct link_vars link_vars;
u32 link_cnt;
struct bnx2x_link_report_data last_reported_link;
struct mdio_if_info mdio;
struct bnx2x_common common;
......@@ -1441,6 +1460,8 @@ struct bnx2x_func_init_params {
#define WAIT_RAMROD_POLL 0x01
#define WAIT_RAMROD_COMMON 0x02
void bnx2x_read_mf_cfg(struct bnx2x *bp);
/* dmae */
void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32);
void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
......
......@@ -758,35 +758,119 @@ u16 bnx2x_get_mf_speed(struct bnx2x *bp)
return line_speed;
}
/**
* bnx2x_fill_report_data - fill link report data to report
*
* @bp: driver handle
* @data: link state to update
*
* It uses a none-atomic bit operations because is called under the mutex.
*/
static inline void bnx2x_fill_report_data(struct bnx2x *bp,
struct bnx2x_link_report_data *data)
{
u16 line_speed = bnx2x_get_mf_speed(bp);
memset(data, 0, sizeof(*data));
/* Fill the report data: efective line speed */
data->line_speed = line_speed;
/* Link is down */
if (!bp->link_vars.link_up || (bp->flags & MF_FUNC_DIS))
__set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
&data->link_report_flags);
/* Full DUPLEX */
if (bp->link_vars.duplex == DUPLEX_FULL)
__set_bit(BNX2X_LINK_REPORT_FD, &data->link_report_flags);
/* Rx Flow Control is ON */
if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX)
__set_bit(BNX2X_LINK_REPORT_RX_FC_ON, &data->link_report_flags);
/* Tx Flow Control is ON */
if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX)
__set_bit(BNX2X_LINK_REPORT_TX_FC_ON, &data->link_report_flags);
}
/**
* bnx2x_link_report - report link status to OS.
*
* @bp: driver handle
*
* Calls the __bnx2x_link_report() under the same locking scheme
* as a link/PHY state managing code to ensure a consistent link
* reporting.
*/
void bnx2x_link_report(struct bnx2x *bp)
{
if (bp->flags & MF_FUNC_DIS) {
netif_carrier_off(bp->dev);
netdev_err(bp->dev, "NIC Link is Down\n");
bnx2x_acquire_phy_lock(bp);
__bnx2x_link_report(bp);
bnx2x_release_phy_lock(bp);
}
/**
* __bnx2x_link_report - report link status to OS.
*
* @bp: driver handle
*
* None atomic inmlementation.
* Should be called under the phy_lock.
*/
void __bnx2x_link_report(struct bnx2x *bp)
{
struct bnx2x_link_report_data cur_data;
/* reread mf_cfg */
if (!CHIP_IS_E1(bp))
bnx2x_read_mf_cfg(bp);
/* Read the current link report info */
bnx2x_fill_report_data(bp, &cur_data);
/* Don't report link down or exactly the same link status twice */
if (!memcmp(&cur_data, &bp->last_reported_link, sizeof(cur_data)) ||
(test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
&bp->last_reported_link.link_report_flags) &&
test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
&cur_data.link_report_flags)))
return;
}
if (bp->link_vars.link_up) {
u16 line_speed;
bp->link_cnt++;
if (bp->state == BNX2X_STATE_OPEN)
/* We are going to report a new link parameters now -
* remember the current data for the next time.
*/
memcpy(&bp->last_reported_link, &cur_data, sizeof(cur_data));
if (test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
&cur_data.link_report_flags)) {
netif_carrier_off(bp->dev);
netdev_err(bp->dev, "NIC Link is Down\n");
return;
} else {
netif_carrier_on(bp->dev);
netdev_info(bp->dev, "NIC Link is Up, ");
pr_cont("%d Mbps ", cur_data.line_speed);
line_speed = bnx2x_get_mf_speed(bp);
pr_cont("%d Mbps ", line_speed);
if (bp->link_vars.duplex == DUPLEX_FULL)
if (test_and_clear_bit(BNX2X_LINK_REPORT_FD,
&cur_data.link_report_flags))
pr_cont("full duplex");
else
pr_cont("half duplex");
if (bp->link_vars.flow_ctrl != BNX2X_FLOW_CTRL_NONE) {
if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX) {
/* Handle the FC at the end so that only these flags would be
* possibly set. This way we may easily check if there is no FC
* enabled.
*/
if (cur_data.link_report_flags) {
if (test_bit(BNX2X_LINK_REPORT_RX_FC_ON,
&cur_data.link_report_flags)) {
pr_cont(", receive ");
if (bp->link_vars.flow_ctrl &
BNX2X_FLOW_CTRL_TX)
if (test_bit(BNX2X_LINK_REPORT_TX_FC_ON,
&cur_data.link_report_flags))
pr_cont("& transmit ");
} else {
pr_cont(", transmit ");
......@@ -794,10 +878,6 @@ void bnx2x_link_report(struct bnx2x *bp)
pr_cont("flow control ON");
}
pr_cont("\n");
} else { /* link_down */
netif_carrier_off(bp->dev);
netdev_err(bp->dev, "NIC Link is Down\n");
}
}
......@@ -1345,6 +1425,13 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD;
/* Set the initial link reported state to link down */
bnx2x_acquire_phy_lock(bp);
memset(&bp->last_reported_link, 0, sizeof(bp->last_reported_link));
__set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
&bp->last_reported_link.link_report_flags);
bnx2x_release_phy_lock(bp);
/* must be called before memory allocation and HW init */
bnx2x_ilt_set_info(bp);
......
......@@ -67,11 +67,12 @@ void bnx2x__link_status_update(struct bnx2x *bp);
* Report link status to upper layer
*
* @param bp
*
* @return int
*/
void bnx2x_link_report(struct bnx2x *bp);
/* None-atomic version of bnx2x_link_report() */
void __bnx2x_link_report(struct bnx2x *bp);
/**
* calculates MF speed according to current linespeed and MF
* configuration
......
......@@ -2036,7 +2036,7 @@ static int bnx2x_get_cmng_fns_mode(struct bnx2x *bp)
return CMNG_FNS_NONE;
}
static void bnx2x_read_mf_cfg(struct bnx2x *bp)
void bnx2x_read_mf_cfg(struct bnx2x *bp)
{
int vn, n = (CHIP_MODE_IS_4_PORT(bp) ? 2 : 1);
......@@ -2123,7 +2123,6 @@ static inline void bnx2x_link_sync_notify(struct bnx2x *bp)
/* This function is called upon link interrupt */
static void bnx2x_link_attn(struct bnx2x *bp)
{
u32 prev_link_status = bp->link_vars.link_status;
/* Make sure that we are synced with the current statistics */
bnx2x_stats_handle(bp, STATS_EVENT_STOP);
......@@ -2168,17 +2167,15 @@ static void bnx2x_link_attn(struct bnx2x *bp)
"single function mode without fairness\n");
}
__bnx2x_link_report(bp);
if (IS_MF(bp))
bnx2x_link_sync_notify(bp);
/* indicate link status only if link status actually changed */
if (prev_link_status != bp->link_vars.link_status)
bnx2x_link_report(bp);
}
void bnx2x__link_status_update(struct bnx2x *bp)
{
if ((bp->state != BNX2X_STATE_OPEN) || (bp->flags & MF_FUNC_DIS))
if (bp->state != BNX2X_STATE_OPEN)
return;
bnx2x_link_status_update(&bp->link_params, &bp->link_vars);
......@@ -2188,10 +2185,6 @@ void bnx2x__link_status_update(struct bnx2x *bp)
else
bnx2x_stats_handle(bp, STATS_EVENT_STOP);
/* the link status update could be the result of a DCC event
hence re-read the shmem mf configuration */
bnx2x_read_mf_cfg(bp);
/* indicate link status */
bnx2x_link_report(bp);
}
......@@ -3120,10 +3113,14 @@ static inline void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn)
if (val & DRV_STATUS_SET_MF_BW)
bnx2x_set_mf_bw(bp);
bnx2x__link_status_update(bp);
if ((bp->port.pmf == 0) && (val & DRV_STATUS_PMF))
bnx2x_pmf_update(bp);
/* Always call it here: bnx2x_link_report() will
* prevent the link indication duplication.
*/
bnx2x__link_status_update(bp);
if (bp->port.pmf &&
(val & DRV_STATUS_DCBX_NEGOTIATION_RESULTS) &&
bp->dcbx_enabled > 0)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment