Skip to content

L
linux
Commit 2c66fc34 authored by Klaus Goger's avatar Klaus Goger Committed by Heiko Stuebner
1 Browse files
Options

arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM 

The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230
connector) system-on-module from Theobroma Systems, featuring the
Rockchip RK3399.

It provides the following feature set:
 * up to 4GB DDR3
 * on-module SPI-NOR flash
 * on-module eMMC (with 8-bit 1.8V interface)
 * SD card (on a baseboad) via edge connector
 * Gigabit Ethernet with on-module Micrel KSZ9031 GbE PHY
 * HDMI/eDP/2x MIPI-DSI
 * 2x MIPI-CSI
 * USB
   - 1x USB 3.0 dual-role (direct connection)
   - 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub)
 * on-module STM32 Cortex-M0 companion controller, implementing:
   - low-power RTC functionality (ISL1208 emulation)
   - fan controller (AMC6821 emulation)
   - USB<->CAN bridge controller
Signed-off-by: default avatarKlaus Goger <klaus.goger@theobroma-systems.com>
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent 68987f44
Hide whitespace changes
Inline Side-by-side
Showing with 547 additions and 0 deletions
arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi 0 → 100644
View file @ 2c66fc34
/*
* Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/pwm/pwm.h>
#include "rk3399.dtsi"
#include "rk3399-opp.dtsi"
/ {
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pin_module>;
module-led {
label = "module_led";
gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
panic-indicator;
};
};
/*
* Overwrite the opp-table for CPUB as this board uses a different
* regulator (FAN53555) that only allows 10mV steps and therefore
* can't reach the operation point target voltages from rk3399-opp.dtsi
*/
/delete-node/ opp-table1;
cluster1_opp: opp-table1 {
compatible = "operating-points-v2";
opp-shared;
opp00 {
opp-hz = /bits/ 64 <408000000>;
opp-microvolt = <800000>;
clock-latency-ns = <40000>;
};
opp01 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <800000>;
};
opp02 {
opp-hz = /bits/ 64 <816000000>;
opp-microvolt = <830000>;
opp-suspend;
};
opp03 {
opp-hz = /bits/ 64 <1008000000>;
opp-microvolt = <880000>;
};
opp04 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <950000>;
};
opp05 {
opp-hz = /bits/ 64 <1416000000>;
opp-microvolt = <1030000>;
};
opp06 {
opp-hz = /bits/ 64 <1608000000>;
opp-microvolt = <1100000>;
};
opp07 {
opp-hz = /bits/ 64 <1800000000>;
opp-microvolt = <1200000>;
};
opp08 {
opp-hz = /bits/ 64 <1992000000>;
opp-microvolt = <1230000>;
turbo-mode;
};
};
clkin_gmac: external-gmac-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
clock-output-names = "clkin_gmac";
#clock-cells = <0>;
};
vcc1v2_phy: vcc1v2-phy {
compatible = "regulator-fixed";
regulator-name = "vcc1v2_phy";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
vin-supply = <&vcc5v0_sys>;
};
vcc3v3_sys: vcc3v3-sys {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc5v0_sys>;
};
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
enable-active-low;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en>;
regulator-name = "vcc5v0_host";
regulator-always-on;
vin-supply = <&vcc5v0_sys>;
};
vcc5v0_sys: vcc5v0-sys {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vdd_log: vdd-log {
compatible = "pwm-regulator";
pwms = <&pwm2 0 25000 0>;
regulator-name = "vdd_log";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
status = "okay";
};
};
&cpu_b0 {
cpu-supply = <&vdd_cpu_b>;
};
&cpu_b1 {
cpu-supply = <&vdd_cpu_b>;
};
&cpu_l0 {
cpu-supply = <&vdd_cpu_l>;
};
&cpu_l1 {
cpu-supply = <&vdd_cpu_l>;
};
&cpu_l2 {
cpu-supply = <&vdd_cpu_l>;
};
&cpu_l3 {
cpu-supply = <&vdd_cpu_l>;
};
&emmc_phy {
status = "okay";
};
&gmac {
assigned-clocks = <&cru SCLK_RMII_SRC>;
assigned-clock-parents = <&clkin_gmac>;
clock_in_out = "input";
phy-supply = <&vcc1v2_phy>;
phy-mode = "rgmii";
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 50000>;
tx_delay = <0x10>;
rx_delay = <0x10>;
status = "okay";
};
&i2c0 {
status = "okay";
i2c-scl-rising-time-ns = <168>;
i2c-scl-falling-time-ns = <4>;
clock-frequency = <400000>;
rk808: pmic@1b {
compatible = "rockchip,rk808";
reg = <0x1b>;
interrupt-parent = <&gpio1>;
interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l>;
rockchip,system-power-controller;
wakeup-source;
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
vcc3-supply = <&vcc5v0_sys>;
vcc4-supply = <&vcc5v0_sys>;
vcc6-supply = <&vcc5v0_sys>;
vcc7-supply = <&vcc5v0_sys>;
vcc8-supply = <&vcc3v3_sys>;
vcc9-supply = <&vcc5v0_sys>;
vcc10-supply = <&vcc5v0_sys>;
vcc11-supply = <&vcc5v0_sys>;
vcc12-supply = <&vcc3v3_sys>;
vddio-supply = <&vcc1v8_pmu>;
regulators {
vdd_center: DCDC_REG1 {
regulator-name = "vdd_center";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_l: DCDC_REG2 {
regulator-name = "vdd_cpu_l";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_1v8: DCDC_REG4 {
regulator-name = "vcc_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcc_ldo1: LDO_REG1 {
regulator-name = "vcc_ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc1v8_hdmi: LDO_REG2 {
regulator-name = "vcc1v8_hdmi";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc1v8_pmu: LDO_REG3 {
regulator-name = "vcc1v8_pmu";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcc_sd: LDO_REG4 {
regulator-name = "vcc_sd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_ldo5: LDO_REG5 {
regulator-name = "vcc_ldo5";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ldo6: LDO_REG6 {
regulator-name = "vcc_ldo6";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc0v9_hdmi: LDO_REG7 {
regulator-name = "vcc0v9_hdmi";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_efuse: LDO_REG8 {
regulator-name = "vcc_efuse";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_s3: SWITCH_REG1 {
regulator-name = "vcc3v3_s3";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_s0: SWITCH_REG2 {
regulator-name = "vcc3v3_s0";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
vdd_gpu: regulator@60 {
compatible = "fcs,fan53555";
reg = <0x60>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_gpu";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1230000>;
regulator-ramp-delay = <1000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vcc5v0_sys>;
};
};
&i2c7 {
status = "okay";
clock-frequency = <400000>;
fan: fan@18 {
compatible = "ti,amc6821";
reg = <0x18>;
cooling-min-state = <0>;
cooling-max-state = <9>;
#cooling-cells = <2>;
};
rtc_twi: rtc@6f {
compatible = "isil,isl1208";
reg = <0x6f>;
};
};
&i2c8 {
status = "okay";
clock-frequency = <400000>;
vdd_cpu_b: regulator@60 {
compatible = "fcs,fan53555";
reg = <0x60>;
vin-supply = <&vcc5v0_sys>;
regulator-name = "vdd_cpu_b";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1230000>;
regulator-ramp-delay = <1000>;
fcs,suspend-voltage-selector = <1>;
regulator-always-on;
regulator-boot-on;
};
};
&io_domains {
status = "okay";
bt656-supply = <&vcc_1v8>;
audio-supply = <&vcc_1v8>;
sdmmc-supply = <&vcc_sd>;
gpio1830-supply = <&vcc_1v8>;
};
&pmu_io_domains {
status = "okay";
pmu1830-supply = <&vcc_1v8>;
};
&pwm2 {
status = "okay";
};
&pinctrl {
i2c8 {
i2c8_xfer_a: i2c8-xfer {
rockchip,pins =
<RK_GPIO1 RK_PC4 RK_FUNC_1 &pcfg_pull_up>,
<RK_GPIO1 RK_PC5 RK_FUNC_1 &pcfg_pull_up>;
};
};
leds {
led_pin_module: led-module-gpio {
rockchip,pins =
<RK_GPIO2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins =
<RK_GPIO1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
usb2 {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins =
<RK_GPIO4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&sdhci {
bus-width = <8>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
non-removable;
status = "okay";
};
&sdmmc {
vqmmc = <&vcc_sd>;
};
&spi1 {
status = "okay";
norflash: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
};
};
&u2phy1 {
status = "okay";
u2phy1_otg: otg-port {
status = "okay";
};
u2phy1_host: host-port {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
};
&usbdrd3_1 {
status = "okay";
};
&usbdrd_dwc3_1 {
status = "okay";
dr_mode = "host";
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7