Commit 2cbafffb authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler"

This reverts commit f24771b6 as it is
reported to break the build.
Reported-by: default avatarkernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202301200130.ttBiTzfO-lkp@intel.com
Fixes: f24771b6 ("serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler")
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Valentin Caron <valentin.caron@foss.st.com> # V3
Cc: Marek Vasut <marex@denx.de>
Cc: Johan Hovold <johan@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 5342ab0a
...@@ -797,9 +797,23 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) ...@@ -797,9 +797,23 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr)
spin_unlock(&port->lock); spin_unlock(&port->lock);
} }
if (stm32_usart_rx_dma_enabled(port))
return IRQ_WAKE_THREAD;
else
return IRQ_HANDLED;
}
static irqreturn_t stm32_usart_threaded_interrupt(int irq, void *ptr)
{
struct uart_port *port = ptr;
struct tty_port *tport = &port->state->port;
struct stm32_port *stm32_port = to_stm32_port(port);
unsigned int size;
unsigned long flags;
/* Receiver timeout irq for DMA RX */ /* Receiver timeout irq for DMA RX */
if (stm32_usart_rx_dma_enabled(port) && !stm32_port->throttled) { if (!stm32_port->throttled) {
spin_lock(&port->lock); spin_lock_irqsave(&port->lock, flags);
size = stm32_usart_receive_chars(port, false); size = stm32_usart_receive_chars(port, false);
uart_unlock_and_check_sysrq_irqrestore(port, flags); uart_unlock_and_check_sysrq_irqrestore(port, flags);
if (size) if (size)
...@@ -1001,8 +1015,10 @@ static int stm32_usart_startup(struct uart_port *port) ...@@ -1001,8 +1015,10 @@ static int stm32_usart_startup(struct uart_port *port)
u32 val; u32 val;
int ret; int ret;
ret = request_irq(port->irq, stm32_usart_interrupt, ret = request_threaded_irq(port->irq, stm32_usart_interrupt,
IRQF_NO_SUSPEND, name, port); stm32_usart_threaded_interrupt,
IRQF_ONESHOT | IRQF_NO_SUSPEND,
name, port);
if (ret) if (ret)
return ret; return ret;
...@@ -1585,6 +1601,13 @@ static int stm32_usart_of_dma_rx_probe(struct stm32_port *stm32port, ...@@ -1585,6 +1601,13 @@ static int stm32_usart_of_dma_rx_probe(struct stm32_port *stm32port,
struct dma_slave_config config; struct dma_slave_config config;
int ret; int ret;
/*
* Using DMA and threaded handler for the console could lead to
* deadlocks.
*/
if (uart_console(port))
return -ENODEV;
stm32port->rx_buf = dma_alloc_coherent(dev, RX_BUF_L, stm32port->rx_buf = dma_alloc_coherent(dev, RX_BUF_L,
&stm32port->rx_dma_buf, &stm32port->rx_dma_buf,
GFP_KERNEL); GFP_KERNEL);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment