Commit 2cf9f0fc authored by Tobin Davis's avatar Tobin Davis Committed by Jaroslav Kysela

[ALSA] hda-codec - Add support for Fujitsu PI1556 Realtek ALC880

This patch adds support for the Fujitsu PI1556 laptop.
Issue:  Volume knob on system maxes out lower than alsamixer (0x35 vs 0x40).
Everything else works, and audio quality is good at 0x35.
Signed-off-by: default avatarTobin Davis <tdavis@dsl-only.net>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarJaroslav Kysela <perex@suse.cz>
parent 288e5c35
......@@ -785,6 +785,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
asus-dig ASUS with SPDIF out
asus-dig2 ASUS with SPDIF out (using GPIO2)
uniwill 3-jack
fujitsu Fujitsu Laptops (Pi1536)
F1734 2-jack
lg LG laptop (m1 express dual)
lg-lw LG LW20/LW25 laptop
......
......@@ -52,6 +52,7 @@ enum {
ALC880_ASUS_DIG,
ALC880_ASUS_W1V,
ALC880_ASUS_DIG2,
ALC880_FUJITSU,
ALC880_UNIWILL_DIG,
ALC880_UNIWILL,
ALC880_UNIWILL_P53,
......@@ -1073,6 +1074,20 @@ static struct snd_kcontrol_new alc880_uniwill_mixer[] = {
{ } /* end */
};
static struct snd_kcontrol_new alc880_fujitsu_mixer[] = {
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("Headphone Playback Switch", 0x0c, 2, HDA_INPUT),
HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("Speaker Playback Switch", 0x0d, 2, HDA_INPUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Ext Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Ext Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Int Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
HDA_CODEC_MUTE("Int Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
{ } /* end */
};
static struct snd_kcontrol_new alc880_uniwill_p53_mixer[] = {
HDA_CODEC_VOLUME("HPhone Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("HPhone Playback Switch", 0x0c, 2, HDA_INPUT),
......@@ -1388,6 +1403,11 @@ static struct hda_verb alc880_uniwill_p53_init_verbs[] = {
{ }
};
static struct hda_verb alc880_beep_init_verbs[] = {
{ 0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(5) },
{ }
};
/* toggle speaker-output according to the hp-jack state */
static void alc880_uniwill_automute(struct hda_codec *codec)
{
......@@ -2357,6 +2377,8 @@ static const char *alc880_models[ALC880_MODEL_LAST] = {
[ALC880_ASUS_DIG] = "asus-dig",
[ALC880_ASUS_DIG2] = "asus-dig2",
[ALC880_UNIWILL_DIG] = "uniwill",
[ALC880_UNIWILL_P53] = "uniwill-p53",
[ALC880_FUJITSU] = "fujitsu",
[ALC880_F1734] = "F1734",
[ALC880_LG] = "lg",
[ALC880_LG_LW] = "lg-lw",
......@@ -2427,6 +2449,7 @@ static struct snd_pci_quirk alc880_cfg_tbl[] = {
SND_PCI_QUIRK(0x1695, 0x4012, "EPox EP-5LDA", ALC880_5ST_DIG),
SND_PCI_QUIRK(0x1734, 0x10ac, "FSC", ALC880_UNIWILL),
SND_PCI_QUIRK(0x1734, 0x107c, "FSC F1734", ALC880_F1734),
SND_PCI_QUIRK(0x1734, 0x10b0, "Fujitsu", ALC880_FUJITSU),
SND_PCI_QUIRK(0x1854, 0x003b, "LG", ALC880_LG),
SND_PCI_QUIRK(0x1854, 0x0068, "LG w1", ALC880_LG),
......@@ -2635,7 +2658,21 @@ static struct alc_config_preset alc880_presets[] = {
.num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
.dac_nids = alc880_asus_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc880_w810_modes),
.channel_mode = alc880_w810_modes,
.channel_mode = alc880_threestack_modes,
.input_mux = &alc880_capture_source,
.unsol_event = alc880_uniwill_p53_unsol_event,
.init_hook = alc880_uniwill_p53_hp_automute,
},
[ALC880_FUJITSU] = {
.mixers = { alc880_fujitsu_mixer,
alc880_pcbeep_mixer, },
.init_verbs = { alc880_volume_init_verbs,
alc880_uniwill_p53_init_verbs,
alc880_beep_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_dac_nids),
.dac_nids = alc880_dac_nids,
.num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes),
.channel_mode = alc880_2_jack_modes,
.input_mux = &alc880_capture_source,
.unsol_event = alc880_uniwill_p53_unsol_event,
.init_hook = alc880_uniwill_p53_hp_automute,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment