Skip to content

L
linux
Commit 2d3e4866 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm 

Pull KVM updates from Paolo Bonzini:
 "ARM:
   - HYP mode stub supports kexec/kdump on 32-bit
   - improved PMU support
   - virtual interrupt controller performance improvements
   - support for userspace virtual interrupt controller (slower, but
     necessary for KVM on the weird Broadcom SoCs used by the Raspberry
     Pi 3)

  MIPS:
   - basic support for hardware virtualization (ImgTec P5600/P6600/I6400
     and Cavium Octeon III)

  PPC:
   - in-kernel acceleration for VFIO

  s390:
   - support for guests without storage keys
   - adapter interruption suppression

  x86:
   - usual range of nVMX improvements, notably nested EPT support for
     accessed and dirty bits
   - emulation of CPL3 CPUID faulting

  generic:
   - first part of VCPU thread request API
   - kvm_stat improvements"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
  kvm: nVMX: Don't validate disabled secondary controls
  KVM: put back #ifndef CONFIG_S390 around kvm_vcpu_kick
  Revert "KVM: Support vCPU-based gfn->hva cache"
  tools/kvm: fix top level makefile
  KVM: x86: don't hold kvm->lock in KVM_SET_GSI_ROUTING
  KVM: Documentation: remove VM mmap documentation
  kvm: nVMX: Remove superfluous VMX instruction fault checks
  KVM: x86: fix emulation of RSM and IRET instructions
  KVM: mark requests that need synchronization
  KVM: return if kvm_vcpu_wake_up() did wake up the VCPU
  KVM: add explicit barrier to kvm_vcpu_kick
  KVM: perform a wake_up in kvm_make_all_cpus_request
  KVM: mark requests that do not need a wakeup
  KVM: remove #ifndef CONFIG_S390 around kvm_vcpu_wake_up
  KVM: x86: always use kvm_make_request instead of set_bit
  KVM: add kvm_{test,clear}_request to replace {test,clear}_bit
  s390: kvm: Cpu model support for msa6, msa7 and msa8
  KVM: x86: remove irq disablement around KVM_SET_CLOCK/KVM_GET_CLOCK
  kvm: better MWAIT emulation for guests
  KVM: x86: virtualize cpuid faulting
  ...
parents 9c6ee01e 2e5b0bd9
Expand all Show whitespace changes
Inline Side-by-side
Showing with 9189 additions and 3843 deletions
Documentation/virtual/kvm/api.txt
View file @ 2d3e4866
This diff is collapsed.
Documentation/virtual/kvm/arm/hyp-abi.txt 0 → 100644
View file @ 2d3e4866
* Internal ABI between the kernel and HYP
This file documents the interaction between the Linux kernel and the
hypervisor layer when running Linux as a hypervisor (for example
KVM). It doesn't cover the interaction of the kernel with the
hypervisor when running as a guest (under Xen, KVM or any other
hypervisor), or any hypervisor-specific interaction when the kernel is
used as a host.
On arm and arm64 (without VHE), the kernel doesn't run in hypervisor
mode, but still needs to interact with it, allowing a built-in
hypervisor to be either installed or torn down.
In order to achieve this, the kernel must be booted at HYP (arm) or
EL2 (arm64), allowing it to install a set of stubs before dropping to
SVC/EL1. These stubs are accessible by using a 'hvc #0' instruction,
and only act on individual CPUs.
Unless specified otherwise, any built-in hypervisor must implement
these functions (see arch/arm{,64}/include/asm/virt.h):
* r0/x0 = HVC_SET_VECTORS
r1/x1 = vectors
Set HVBAR/VBAR_EL2 to 'vectors' to enable a hypervisor. 'vectors'
must be a physical address, and respect the alignment requirements
of the architecture. Only implemented by the initial stubs, not by
Linux hypervisors.
* r0/x0 = HVC_RESET_VECTORS
Turn HYP/EL2 MMU off, and reset HVBAR/VBAR_EL2 to the initials
stubs' exception vector value. This effectively disables an existing
hypervisor.
* r0/x0 = HVC_SOFT_RESTART
r1/x1 = restart address
x2 = x0's value when entering the next payload (arm64)
x3 = x1's value when entering the next payload (arm64)
x4 = x2's value when entering the next payload (arm64)
Mask all exceptions, disable the MMU, move the arguments into place
(arm64 only), and jump to the restart address while at HYP/EL2. This
hypercall is not expected to return to its caller.
Any other value of r0/x0 triggers a hypervisor-specific handling,
which is not documented here.
The return value of a stub hypercall is held by r0/x0, and is 0 on
success, and HVC_STUB_ERR on error. A stub hypercall is allowed to
clobber any of the caller-saved registers (x0-x18 on arm64, r0-r3 and
ip on arm). It is thus recommended to use a function call to perform
the hypercall.
Documentation/virtual/kvm/devices/s390_flic.txt
View file @ 2d3e4866
......@@ -14,6 +14,8 @@ FLIC provides support to
- purge one pending floating I/O interrupt (KVM_DEV_FLIC_CLEAR_IO_IRQ)
- enable/disable for the guest transparent async page faults
- register and modify adapter interrupt sources (KVM_DEV_FLIC_ADAPTER_*)
- modify AIS (adapter-interruption-suppression) mode state (KVM_DEV_FLIC_AISM)
- inject adapter interrupts on a specified adapter (KVM_DEV_FLIC_AIRQ_INJECT)
Groups:
KVM_DEV_FLIC_ENQUEUE
......@@ -64,12 +66,18 @@ struct kvm_s390_io_adapter {
__u8 isc;
__u8 maskable;
__u8 swap;
__u8 pad;
__u8 flags;
};
id contains the unique id for the adapter, isc the I/O interruption subclass
to use, maskable whether this adapter may be masked (interrupts turned off)
and swap whether the indicators need to be byte swapped.
to use, maskable whether this adapter may be masked (interrupts turned off),
swap whether the indicators need to be byte swapped, and flags contains
further characteristics of the adapter.
Currently defined values for 'flags' are:
- KVM_S390_ADAPTER_SUPPRESSIBLE: adapter is subject to AIS
(adapter-interrupt-suppression) facility. This flag only has an effect if
the AIS capability is enabled.
Unknown flag values are ignored.
KVM_DEV_FLIC_ADAPTER_MODIFY
......@@ -101,6 +109,33 @@ struct kvm_s390_io_adapter_req {
release a userspace page for the translated address specified in addr
from the list of mappings
KVM_DEV_FLIC_AISM
modify the adapter-interruption-suppression mode for a given isc if the
AIS capability is enabled. Takes a kvm_s390_ais_req describing:
struct kvm_s390_ais_req {
__u8 isc;
__u16 mode;
};
isc contains the target I/O interruption subclass, mode the target
adapter-interruption-suppression mode. The following modes are
currently supported:
- KVM_S390_AIS_MODE_ALL: ALL-Interruptions Mode, i.e. airq injection
is always allowed;
- KVM_S390_AIS_MODE_SINGLE: SINGLE-Interruption Mode, i.e. airq
injection is only allowed once and the following adapter interrupts
will be suppressed until the mode is set again to ALL-Interruptions
or SINGLE-Interruption mode.
KVM_DEV_FLIC_AIRQ_INJECT
Inject adapter interrupts on a specified adapter.
attr->attr contains the unique id for the adapter, which allows for
adapter-specific checks and actions.
For adapters subject to AIS, handle the airq injection suppression for
an isc according to the adapter-interruption-suppression mode on condition
that the AIS capability is enabled.
Note: The KVM_SET_DEVICE_ATTR/KVM_GET_DEVICE_ATTR device ioctls executed on
FLIC with an unknown group or attribute gives the error code EINVAL (instead of
ENXIO, as specified in the API documentation). It is not possible to conclude
......
Documentation/virtual/kvm/devices/vfio.txt
View file @ 2d3e4866
......@@ -16,7 +16,21 @@ Groups:
KVM_DEV_VFIO_GROUP attributes:
KVM_DEV_VFIO_GROUP_ADD: Add a VFIO group to VFIO-KVM device tracking
kvm_device_attr.addr points to an int32_t file descriptor
for the VFIO group.
KVM_DEV_VFIO_GROUP_DEL: Remove a VFIO group from VFIO-KVM device tracking
kvm_device_attr.addr points to an int32_t file descriptor
for the VFIO group.
KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE: attaches a guest visible TCE table
allocated by sPAPR KVM.
kvm_device_attr.addr points to a struct:
For each, kvm_device_attr.addr points to an int32_t file descriptor
for the VFIO group.
struct kvm_vfio_spapr_tce {
__s32 groupfd;
__s32 tablefd;
};
where
@groupfd is a file descriptor for a VFIO group;
@tablefd is a file descriptor for a TCE table allocated via
KVM_CREATE_SPAPR_TCE.
Documentation/virtual/kvm/devices/vm.txt
View file @ 2d3e4866
......@@ -140,7 +140,8 @@ struct kvm_s390_vm_cpu_subfunc {
u8 kmo[16]; # valid with Message-Security-Assist-Extension 4
u8 pcc[16]; # valid with Message-Security-Assist-Extension 4
u8 ppno[16]; # valid with Message-Security-Assist-Extension 5
u8 reserved[1824]; # reserved for future instructions
u8 kma[16]; # valid with Message-Security-Assist-Extension 8
u8 reserved[1808]; # reserved for future instructions
};
Parameters: address of a buffer to load the subfunction blocks from.
......
Documentation/virtual/kvm/hypercalls.txt
View file @ 2d3e4866
......@@ -28,6 +28,11 @@ S390:
property inside the device tree's /hypervisor node.
For more information refer to Documentation/virtual/kvm/ppc-pv.txt
MIPS:
KVM hypercalls use the HYPCALL instruction with code 0 and the hypercall
number in $2 (v0). Up to four arguments may be placed in $4-$7 (a0-a3) and
the return value is placed in $2 (v0).
KVM Hypercalls Documentation
===========================
The template for each hypercall is:
......
arch/arm/boot/compressed/head.S
View file @ 2d3e4866
......@@ -422,7 +422,17 @@ dtb_check_done:
cmp r0, #HYP_MODE
bne 1f
bl __hyp_get_vectors
/*
* Compute the address of the hyp vectors after relocation.
* This requires some arithmetic since we cannot directly
* reference __hyp_stub_vectors in a PC-relative way.
* Call __hyp_set_vectors with the new address so that we
* can HVC again after the copy.
*/
0: adr r0, 0b
movw r1, #:lower16:__hyp_stub_vectors - 0b
movt r1, #:upper16:__hyp_stub_vectors - 0b
add r0, r0, r1
sub r0, r0, r5
add r0, r0, r10
bl __hyp_set_vectors
......
arch/arm/include/asm/kvm_asm.h
View file @ 2d3e4866
......@@ -33,7 +33,7 @@
#define ARM_EXCEPTION_IRQ 5
#define ARM_EXCEPTION_FIQ 6
#define ARM_EXCEPTION_HVC 7
#define ARM_EXCEPTION_HYP_GONE HVC_STUB_ERR
/*
* The rr_lo_hi macro swaps a pair of registers depending on
* current endianness. It is used in conjunction with ldrd and strd
......@@ -72,10 +72,11 @@ extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu);
extern void __init_stage2_translation(void);
extern void __kvm_hyp_reset(unsigned long);
extern u64 __vgic_v3_get_ich_vtr_el2(void);
extern u64 __vgic_v3_read_vmcr(void);
extern void __vgic_v3_write_vmcr(u32 vmcr);
extern void __vgic_v3_init_lrs(void);
#endif
#endif /* __ARM_KVM_ASM_H__ */
arch/arm/include/asm/kvm_host.h
View file @ 2d3e4866
......@@ -30,7 +30,6 @@
#define __KVM_HAVE_ARCH_INTC_INITIALIZED
#define KVM_USER_MEM_SLOTS 32
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
#define KVM_HAVE_ONE_REG
#define KVM_HALT_POLL_NS_DEFAULT 500000
......@@ -45,7 +44,7 @@
#define KVM_MAX_VCPUS VGIC_V2_MAX_CPUS
#endif
#define KVM_REQ_VCPU_EXIT 8
#define KVM_REQ_VCPU_EXIT (8 | KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)
u32 *kvm_vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num, u32 mode);
int __attribute_const__ kvm_target_cpu(void);
......@@ -270,12 +269,6 @@ static inline void __cpu_init_stage2(void)
kvm_call_hyp(__init_stage2_translation);
}
static inline void __cpu_reset_hyp_mode(unsigned long vector_ptr,
phys_addr_t phys_idmap_start)
{
kvm_call_hyp((void *)virt_to_idmap(__kvm_hyp_reset), vector_ptr);
}
static inline int kvm_arch_dev_ioctl_check_extension(struct kvm *kvm, long ext)
{
return 0;
......
arch/arm/include/asm/kvm_mmu.h
View file @ 2d3e4866
......@@ -56,7 +56,6 @@ void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu);
phys_addr_t kvm_mmu_get_httbr(void);
phys_addr_t kvm_get_idmap_vector(void);
phys_addr_t kvm_get_idmap_start(void);
int kvm_mmu_init(void);
void kvm_clear_hyp_idmap(void);
......
arch/arm/include/asm/proc-fns.h
View file @ 2d3e4866
......@@ -43,7 +43,7 @@ extern struct processor {
/*
* Special stuff for a reset
*/
void (*reset)(unsigned long addr) __attribute__((noreturn));
void (*reset)(unsigned long addr, bool hvc) __attribute__((noreturn));
/*
* Idle the processor
*/
......@@ -88,7 +88,7 @@ extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte);
#else
extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
#endif
extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
extern void cpu_reset(unsigned long addr, bool hvc) __attribute__((noreturn));
/* These three are private to arch/arm/kernel/suspend.c */
extern void cpu_do_suspend(void *);
......
arch/arm/include/asm/virt.h
View file @ 2d3e4866
......@@ -53,7 +53,7 @@ static inline void sync_boot_mode(void)
}
void __hyp_set_vectors(unsigned long phys_vector_base);
unsigned long __hyp_get_vectors(void);
void __hyp_reset_vectors(void);
#else
#define __boot_cpu_mode (SVC_MODE)
#define sync_boot_mode()
......@@ -94,6 +94,18 @@ extern char __hyp_text_start[];
extern char __hyp_text_end[];
#endif
#else
/* Only assembly code should need those */
#define HVC_SET_VECTORS 0
#define HVC_SOFT_RESTART 1
#define HVC_RESET_VECTORS 2
#define HVC_STUB_HCALL_NR 3
#endif /* __ASSEMBLY__ */
#define HVC_STUB_ERR 0xbadca11
#endif /* ! VIRT_H */
arch/arm/include/uapi/asm/kvm.h
View file @ 2d3e4866
......@@ -27,6 +27,8 @@
#define __KVM_HAVE_IRQ_LINE
#define __KVM_HAVE_READONLY_MEM
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
#define KVM_REG_SIZE(id) \
(1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT))
......@@ -114,6 +116,8 @@ struct kvm_debug_exit_arch {
};
struct kvm_sync_regs {
/* Used with KVM_CAP_ARM_USER_IRQ */
__u64 device_irq_level;
};
struct kvm_arch_memory_slot {
......
arch/arm/kernel/hyp-stub.S
View file @ 2d3e4866
......@@ -125,7 +125,7 @@ ENTRY(__hyp_stub_install_secondary)
* (see safe_svcmode_maskall).
*/
@ Now install the hypervisor stub:
adr r7, __hyp_stub_vectors
W(adr) r7, __hyp_stub_vectors
mcr p15, 4, r7, c12, c0, 0 @ set hypervisor vector base (HVBAR)
@ Disable all traps, so we don't get any nasty surprise
......@@ -202,9 +202,23 @@ ARM_BE8(orr r7, r7, #(1 << 25)) @ HSCTLR.EE
ENDPROC(__hyp_stub_install_secondary)
__hyp_stub_do_trap:
cmp r0, #-1
mrceq p15, 4, r0, c12, c0, 0 @ get HVBAR
mcrne p15, 4, r0, c12, c0, 0 @ set HVBAR
teq r0, #HVC_SET_VECTORS
bne 1f
mcr p15, 4, r1, c12, c0, 0 @ set HVBAR
b __hyp_stub_exit
1: teq r0, #HVC_SOFT_RESTART
bne 1f
bx r1
1: teq r0, #HVC_RESET_VECTORS
beq __hyp_stub_exit
ldr r0, =HVC_STUB_ERR
__ERET
__hyp_stub_exit:
mov r0, #0
__ERET
ENDPROC(__hyp_stub_do_trap)
......@@ -230,15 +244,26 @@ ENDPROC(__hyp_stub_do_trap)
* so you will need to set that to something sensible at the new hypervisor's
* initialisation entry point.
*/
ENTRY(__hyp_get_vectors)
mov r0, #-1
ENDPROC(__hyp_get_vectors)
@ fall through
ENTRY(__hyp_set_vectors)
mov r1, r0
mov r0, #HVC_SET_VECTORS
__HVC(0)
ret lr
ENDPROC(__hyp_set_vectors)
ENTRY(__hyp_soft_restart)
mov r1, r0
mov r0, #HVC_SOFT_RESTART
__HVC(0)
ret lr
ENDPROC(__hyp_soft_restart)
ENTRY(__hyp_reset_vectors)
mov r0, #HVC_RESET_VECTORS
__HVC(0)
ret lr
ENDPROC(__hyp_reset_vectors)
#ifndef ZIMAGE
.align 2
.L__boot_cpu_mode_offset:
......@@ -246,7 +271,7 @@ ENDPROC(__hyp_set_vectors)
#endif
.align 5
__hyp_stub_vectors:
ENTRY(__hyp_stub_vectors)
__hyp_stub_reset: W(b) .
__hyp_stub_und: W(b) .
__hyp_stub_svc: W(b) .
......
arch/arm/kernel/reboot.c
View file @ 2d3e4866
......@@ -12,10 +12,11 @@
#include <asm/cacheflush.h>
#include <asm/idmap.h>
#include <asm/virt.h>
#include "reboot.h"
typedef void (*phys_reset_t)(unsigned long);
typedef void (*phys_reset_t)(unsigned long, bool);
/*
* Function pointers to optional machine specific functions
......@@ -51,7 +52,9 @@ static void __soft_restart(void *addr)
/* Switch to the identity mapping. */
phys_reset = (phys_reset_t)virt_to_idmap(cpu_reset);
phys_reset((unsigned long)addr);
/* original stub should be restored by kvm */
phys_reset((unsigned long)addr, is_hyp_mode_available());
/* Should never get here. */
BUG();
......
arch/arm/kvm/arm.c
View file @ 2d3e4866
......@@ -53,7 +53,6 @@ __asm__(".arch_extension virt");
static DEFINE_PER_CPU(unsigned long, kvm_arm_hyp_stack_page);
static kvm_cpu_context_t __percpu *kvm_host_cpu_state;
static unsigned long hyp_default_vectors;
/* Per-CPU variable containing the currently running vcpu. */
static DEFINE_PER_CPU(struct kvm_vcpu *, kvm_arm_running_vcpu);
......@@ -209,9 +208,6 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
case KVM_CAP_IMMEDIATE_EXIT:
r = 1;
break;
case KVM_CAP_COALESCED_MMIO:
r = KVM_COALESCED_MMIO_PAGE_OFFSET;
break;
case KVM_CAP_ARM_SET_DEVICE_ADDR:
r = 1;
break;
......@@ -230,6 +226,13 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
else
r = kvm->arch.vgic.msis_require_devid;
break;
case KVM_CAP_ARM_USER_IRQ:
/*
* 1: EL1_VTIMER, EL1_PTIMER, and PMU.
* (bump this number if adding more devices)
*/
r = 1;
break;
default:
r = kvm_arch_dev_ioctl_check_extension(kvm, ext);
break;
......@@ -351,15 +354,14 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
vcpu->arch.host_cpu_context = this_cpu_ptr(kvm_host_cpu_state);
kvm_arm_set_running_vcpu(vcpu);
kvm_vgic_load(vcpu);
}
void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
{
/*
* The arch-generic KVM code expects the cpu field of a vcpu to be -1
* if the vcpu is no longer assigned to a cpu. This is used for the
* optimized make_all_cpus_request path.
*/
kvm_vgic_put(vcpu);
vcpu->cpu = -1;
kvm_arm_set_running_vcpu(NULL);
......@@ -517,12 +519,6 @@ static int kvm_vcpu_first_run_init(struct kvm_vcpu *vcpu)
return ret;
}
/*
* Enable the arch timers only if we have an in-kernel VGIC
* and it has been properly initialized, since we cannot handle
* interrupts from the virtual timer with a userspace gic.
*/
if (irqchip_in_kernel(kvm) && vgic_initialized(kvm))
ret = kvm_timer_enable(vcpu);
return ret;
......@@ -633,16 +629,23 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
* non-preemptible context.
*/
preempt_disable();
kvm_pmu_flush_hwstate(vcpu);
kvm_timer_flush_hwstate(vcpu);
kvm_vgic_flush_hwstate(vcpu);
local_irq_disable();
/*
* Re-check atomic conditions
* If we have a singal pending, or need to notify a userspace
* irqchip about timer or PMU level changes, then we exit (and
* update the timer level state in kvm_timer_update_run
* below).
*/
if (signal_pending(current)) {
if (signal_pending(current) ||
kvm_timer_should_notify_user(vcpu) ||
kvm_pmu_should_notify_user(vcpu)) {
ret = -EINTR;
run->exit_reason = KVM_EXIT_INTR;
}
......@@ -714,6 +717,12 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
ret = handle_exit(vcpu, run, ret);
}
/* Tell userspace about in-kernel device output levels */
if (unlikely(!irqchip_in_kernel(vcpu->kvm))) {
kvm_timer_update_run(vcpu);
kvm_pmu_update_run(vcpu);
}
if (vcpu->sigset_active)
sigprocmask(SIG_SETMASK, &sigsaved, NULL);
return ret;
......@@ -1112,8 +1121,16 @@ static void cpu_init_hyp_mode(void *dummy)
kvm_arm_init_debug();
}
static void cpu_hyp_reset(void)
{
if (!is_kernel_in_hyp_mode())
__hyp_reset_vectors();
}
static void cpu_hyp_reinit(void)
{
cpu_hyp_reset();
if (is_kernel_in_hyp_mode()) {
/*
* __cpu_init_stage2() is safe to call even if the PM
......@@ -1121,7 +1138,6 @@ static void cpu_hyp_reinit(void)
*/
__cpu_init_stage2();
} else {
if (__hyp_get_vectors() == hyp_default_vectors)
cpu_init_hyp_mode(NULL);
}
......@@ -1129,13 +1145,6 @@ static void cpu_hyp_reinit(void)
kvm_vgic_init_cpu_hardware();
}
static void cpu_hyp_reset(void)
{
if (!is_kernel_in_hyp_mode())
__cpu_reset_hyp_mode(hyp_default_vectors,
kvm_get_idmap_start());
}
static void _kvm_arch_hardware_enable(void *discard)
{
if (!__this_cpu_read(kvm_arm_hardware_enabled)) {
......@@ -1318,12 +1327,6 @@ static int init_hyp_mode(void)
if (err)
goto out_err;
/*
* It is probably enough to obtain the default on one
* CPU. It's unlikely to be different on the others.
*/
hyp_default_vectors = __hyp_get_vectors();
/*
* Allocate stack pages for Hypervisor-mode
*/
......
arch/arm/kvm/coproc.c
View file @ 2d3e4866
......@@ -40,6 +40,24 @@
* Co-processor emulation
*****************************************************************************/
static bool write_to_read_only(struct kvm_vcpu *vcpu,
const struct coproc_params *params)
{
WARN_ONCE(1, "CP15 write to read-only register\n");
print_cp_instr(params);
kvm_inject_undefined(vcpu);
return false;
}
static bool read_from_write_only(struct kvm_vcpu *vcpu,
const struct coproc_params *params)
{
WARN_ONCE(1, "CP15 read to write-only register\n");
print_cp_instr(params);
kvm_inject_undefined(vcpu);
return false;
}
/* 3 bits per cache level, as per CLIDR, but non-existent caches always 0 */
static u32 cache_levels;
......@@ -502,15 +520,15 @@ static int emulate_cp15(struct kvm_vcpu *vcpu,
if (likely(r->access(vcpu, params, r))) {
/* Skip instruction, since it was emulated */
kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
return 1;
}
/* If access function fails, it should complain. */
} else {
/* If access function fails, it should complain. */
kvm_err("Unsupported guest CP15 access at: %08lx\n",
*vcpu_pc(vcpu));
print_cp_instr(params);
}
kvm_inject_undefined(vcpu);
}
return 1;
}
......
arch/arm/kvm/coproc.h
View file @ 2d3e4866
......@@ -81,24 +81,6 @@ static inline bool read_zero(struct kvm_vcpu *vcpu,
return true;
}
static inline bool write_to_read_only(struct kvm_vcpu *vcpu,
const struct coproc_params *params)
{
kvm_debug("CP15 write to read-only register at: %08lx\n",
*vcpu_pc(vcpu));
print_cp_instr(params);
return false;
}
static inline bool read_from_write_only(struct kvm_vcpu *vcpu,
const struct coproc_params *params)
{
kvm_debug("CP15 read to write-only register at: %08lx\n",
*vcpu_pc(vcpu));
print_cp_instr(params);
return false;
}
/* Reset functions */
static inline void reset_unknown(struct kvm_vcpu *vcpu,
const struct coproc_reg *r)
......
arch/arm/kvm/handle_exit.c
View file @ 2d3e4866
......@@ -160,6 +160,14 @@ int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run,
case ARM_EXCEPTION_DATA_ABORT:
kvm_inject_vabt(vcpu);
return 1;
case ARM_EXCEPTION_HYP_GONE:
/*
* HYP has been reset to the hyp-stub. This happens
* when a guest is pre-empted by kvm_reboot()'s
* shutdown call.
*/
run->exit_reason = KVM_EXIT_FAIL_ENTRY;
return 0;
default:
kvm_pr_unimpl("Unsupported exception type: %d",
exception_index);
......
arch/arm/kvm/hyp/hyp-entry.S
View file @ 2d3e4866
......@@ -126,11 +126,29 @@ hyp_hvc:
*/
pop {r0, r1, r2}
/* Check for __hyp_get_vectors */
cmp r0, #-1
mrceq p15, 4, r0, c12, c0, 0 @ get HVBAR
beq 1f
/*
* Check if we have a kernel function, which is guaranteed to be
* bigger than the maximum hyp stub hypercall
*/
cmp r0, #HVC_STUB_HCALL_NR
bhs 1f
/*
* Not a kernel function, treat it as a stub hypercall.
* Compute the physical address for __kvm_handle_stub_hvc
* (as the code lives in the idmaped page) and branch there.
* We hijack ip (r12) as a tmp register.
*/
push {r1}
ldr r1, =kimage_voffset
ldr r1, [r1]
ldr ip, =__kvm_handle_stub_hvc
sub ip, ip, r1
pop {r1}
bx ip
1:
push {lr}
mov lr, r0
......@@ -142,7 +160,7 @@ THUMB( orr lr, #1)
blx lr @ Call the HYP function
pop {lr}
1: eret
eret
guest_trap:
load_vcpu r0 @ Load VCPU pointer to r0
......
arch/arm/kvm/init.S
View file @ 2d3e4866
......@@ -23,6 +23,7 @@
#include <asm/kvm_asm.h>
#include <asm/kvm_arm.h>
#include <asm/kvm_mmu.h>
#include <asm/virt.h>
/********************************************************************
* Hypervisor initialization
......@@ -39,6 +40,10 @@
* - Setup the page tables
* - Enable the MMU
* - Profit! (or eret, if you only care about the code).
*
* Another possibility is to get a HYP stub hypercall.
* We discriminate between the two by checking if r0 contains a value
* that is less than HVC_STUB_HCALL_NR.
*/
.text
......@@ -58,6 +63,10 @@ __kvm_hyp_init:
W(b) .
__do_hyp_init:
@ Check for a stub hypercall
cmp r0, #HVC_STUB_HCALL_NR
blo __kvm_handle_stub_hvc
@ Set stack pointer
mov sp, r0
......@@ -112,20 +121,46 @@ __do_hyp_init:
eret
@ r0 : stub vectors address
ENTRY(__kvm_hyp_reset)
ENTRY(__kvm_handle_stub_hvc)
cmp r0, #HVC_SOFT_RESTART
bne 1f
/* The target is expected in r1 */
msr ELR_hyp, r1
mrs r0, cpsr
bic r0, r0, #MODE_MASK
orr r0, r0, #HYP_MODE
THUMB( orr r0, r0, #PSR_T_BIT )
msr spsr_cxsf, r0
b reset
1: cmp r0, #HVC_RESET_VECTORS
bne 1f
reset:
/* We're now in idmap, disable MMU */
mrc p15, 4, r1, c1, c0, 0 @ HSCTLR
ldr r2, =(HSCTLR_M | HSCTLR_A | HSCTLR_C | HSCTLR_I)
bic r1, r1, r2
ldr r0, =(HSCTLR_M | HSCTLR_A | HSCTLR_C | HSCTLR_I)
bic r1, r1, r0
mcr p15, 4, r1, c1, c0, 0 @ HSCTLR
/* Install stub vectors */
mcr p15, 4, r0, c12, c0, 0 @ HVBAR
isb
/*
* Install stub vectors, using ardb's VA->PA trick.
*/
0: adr r0, 0b @ PA(0)
movw r1, #:lower16:__hyp_stub_vectors - 0b @ VA(stub) - VA(0)
movt r1, #:upper16:__hyp_stub_vectors - 0b
add r1, r1, r0 @ PA(stub)
mcr p15, 4, r1, c12, c0, 0 @ HVBAR
b exit
1: ldr r0, =HVC_STUB_ERR
eret
exit:
mov r0, #0
eret
ENDPROC(__kvm_hyp_reset)
ENDPROC(__kvm_handle_stub_hvc)
.ltorg
......
arch/arm/kvm/interrupts.S
View file @ 2d3e4866
......@@ -37,10 +37,6 @@
* in Hyp mode (see init_hyp_mode in arch/arm/kvm/arm.c). Return values are
* passed in r0 (strictly 32bit).
*
* A function pointer with a value of 0xffffffff has a special meaning,
* and is used to implement __hyp_get_vectors in the same way as in
* arch/arm/kernel/hyp_stub.S.
*
* The calling convention follows the standard AAPCS:
* r0 - r3: caller save
* r12: caller save
......
arch/arm/kvm/mmu.c
View file @ 2d3e4866
......@@ -1524,7 +1524,8 @@ static int handle_hva_to_gpa(struct kvm *kvm,
unsigned long start,
unsigned long end,
int (*handler)(struct kvm *kvm,
gpa_t gpa, void *data),
gpa_t gpa, u64 size,
void *data),
void *data)
{
struct kvm_memslots *slots;
......@@ -1536,7 +1537,7 @@ static int handle_hva_to_gpa(struct kvm *kvm,
/* we only care about the pages that the guest sees */
kvm_for_each_memslot(memslot, slots) {
unsigned long hva_start, hva_end;
gfn_t gfn, gfn_end;
gfn_t gpa;
hva_start = max(start, memslot->userspace_addr);
hva_end = min(end, memslot->userspace_addr +
......@@ -1544,25 +1545,16 @@ static int handle_hva_to_gpa(struct kvm *kvm,
if (hva_start >= hva_end)
continue;
/*
* {gfn(page) | page intersects with [hva_start, hva_end)} =
* {gfn_start, gfn_start+1, ..., gfn_end-1}.
*/
gfn = hva_to_gfn_memslot(hva_start, memslot);
gfn_end = hva_to_gfn_memslot(hva_end + PAGE_SIZE - 1, memslot);
for (; gfn < gfn_end; ++gfn) {
gpa_t gpa = gfn << PAGE_SHIFT;
ret |= handler(kvm, gpa, data);
}
gpa = hva_to_gfn_memslot(hva_start, memslot) << PAGE_SHIFT;
ret |= handler(kvm, gpa, (u64)(hva_end - hva_start), data);
}
return ret;
}
static int kvm_unmap_hva_handler(struct kvm *kvm, gpa_t gpa, void *data)
static int kvm_unmap_hva_handler(struct kvm *kvm, gpa_t gpa, u64 size, void *data)
{
unmap_stage2_range(kvm, gpa, PAGE_SIZE);
unmap_stage2_range(kvm, gpa, size);
return 0;
}
......@@ -1589,10 +1581,11 @@ int kvm_unmap_hva_range(struct kvm *kvm,
return 0;
}
static int kvm_set_spte_handler(struct kvm *kvm, gpa_t gpa, void *data)
static int kvm_set_spte_handler(struct kvm *kvm, gpa_t gpa, u64 size, void *data)
{
pte_t *pte = (pte_t *)data;
WARN_ON(size != PAGE_SIZE);
/*
* We can always call stage2_set_pte with KVM_S2PTE_FLAG_LOGGING_ACTIVE
* flag clear because MMU notifiers will have unmapped a huge PMD before
......@@ -1618,11 +1611,12 @@ void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte)
handle_hva_to_gpa(kvm, hva, end, &kvm_set_spte_handler, &stage2_pte);
}
static int kvm_age_hva_handler(struct kvm *kvm, gpa_t gpa, void *data)
static int kvm_age_hva_handler(struct kvm *kvm, gpa_t gpa, u64 size, void *data)
{
pmd_t *pmd;
pte_t *pte;
WARN_ON(size != PAGE_SIZE && size != PMD_SIZE);
pmd = stage2_get_pmd(kvm, NULL, gpa);
if (!pmd || pmd_none(*pmd)) /* Nothing there */
return 0;
......@@ -1637,11 +1631,12 @@ static int kvm_age_hva_handler(struct kvm *kvm, gpa_t gpa, void *data)
return stage2_ptep_test_and_clear_young(pte);
}
static int kvm_test_age_hva_handler(struct kvm *kvm, gpa_t gpa, void *data)
static int kvm_test_age_hva_handler(struct kvm *kvm, gpa_t gpa, u64 size, void *data)
{
pmd_t *pmd;
pte_t *pte;
WARN_ON(size != PAGE_SIZE && size != PMD_SIZE);
pmd = stage2_get_pmd(kvm, NULL, gpa);
if (!pmd || pmd_none(*pmd)) /* Nothing there */
return 0;
......@@ -1686,11 +1681,6 @@ phys_addr_t kvm_get_idmap_vector(void)
return hyp_idmap_vector;
}
phys_addr_t kvm_get_idmap_start(void)
{
return hyp_idmap_start;
}
static int kvm_map_idmap_text(pgd_t *pgd)
{
int err;
......
arch/arm/kvm/psci.c
View file @ 2d3e4866
......@@ -208,9 +208,10 @@ int kvm_psci_version(struct kvm_vcpu *vcpu)
static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
{
int ret = 1;
struct kvm *kvm = vcpu->kvm;
unsigned long psci_fn = vcpu_get_reg(vcpu, 0) & ~((u32) 0);
unsigned long val;
int ret = 1;
switch (psci_fn) {
case PSCI_0_2_FN_PSCI_VERSION:
......@@ -230,7 +231,9 @@ static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
break;
case PSCI_0_2_FN_CPU_ON:
case PSCI_0_2_FN64_CPU_ON:
mutex_lock(&kvm->lock);
val = kvm_psci_vcpu_on(vcpu);
mutex_unlock(&kvm->lock);
break;
case PSCI_0_2_FN_AFFINITY_INFO:
case PSCI_0_2_FN64_AFFINITY_INFO:
......@@ -279,6 +282,7 @@ static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu)
{
struct kvm *kvm = vcpu->kvm;
unsigned long psci_fn = vcpu_get_reg(vcpu, 0) & ~((u32) 0);
unsigned long val;
......@@ -288,7 +292,9 @@ static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu)
val = PSCI_RET_SUCCESS;
break;
case KVM_PSCI_FN_CPU_ON:
mutex_lock(&kvm->lock);
val = kvm_psci_vcpu_on(vcpu);
mutex_unlock(&kvm->lock);
break;
default:
val = PSCI_RET_NOT_SUPPORTED;
......
arch/arm/mm/mmu.c
View file @ 2d3e4866
......@@ -87,6 +87,8 @@ struct cachepolicy {
#define s2_policy(policy) 0
#endif
unsigned long kimage_voffset __ro_after_init;
static struct cachepolicy cache_policies[] __initdata = {
{
.policy = "uncached",
......@@ -1639,6 +1641,9 @@ void __init paging_init(const struct machine_desc *mdesc)
empty_zero_page = virt_to_page(zero_page);
__flush_dcache_page(NULL, empty_zero_page);
/* Compute the virt/idmap offset, mostly for the sake of KVM */
kimage_voffset = (unsigned long)&kimage_voffset - virt_to_idmap(&kimage_voffset);
}
void __init early_mm_init(const struct machine_desc *mdesc)
......
arch/arm/mm/proc-v7.S
View file @ 2d3e4866
......@@ -39,13 +39,14 @@ ENTRY(cpu_v7_proc_fin)
ENDPROC(cpu_v7_proc_fin)
/*
* cpu_v7_reset(loc)
* cpu_v7_reset(loc, hyp)
*
* Perform a soft reset of the system. Put the CPU into the
* same state as it would be if it had been reset, and branch
* to what would be the reset vector.
*
* - loc - location to jump to for soft reset
* - hyp - indicate if restart occurs in HYP mode
*
* This code must be executed using a flat identity mapping with
* caches disabled.
......@@ -53,11 +54,15 @@ ENDPROC(cpu_v7_proc_fin)
.align 5
.pushsection .idmap.text, "ax"
ENTRY(cpu_v7_reset)
mrc p15, 0, r1, c1, c0, 0 @ ctrl register
bic r1, r1, #0x1 @ ...............m
THUMB( bic r1, r1, #1 << 30 ) @ SCTLR.TE (Thumb exceptions)
mcr p15, 0, r1, c1, c0, 0 @ disable MMU
mrc p15, 0, r2, c1, c0, 0 @ ctrl register
bic r2, r2, #0x1 @ ...............m
THUMB( bic r2, r2, #1 << 30 ) @ SCTLR.TE (Thumb exceptions)
mcr p15, 0, r2, c1, c0, 0 @ disable MMU
isb
#ifdef CONFIG_ARM_VIRT_EXT
teq r1, #0
bne __hyp_soft_restart
#endif
bx r0
ENDPROC(cpu_v7_reset)
.popsection
......
arch/arm64/include/asm/kvm_asm.h
View file @ 2d3e4866
......@@ -28,7 +28,7 @@
#define ARM_EXCEPTION_EL1_SERROR 1
#define ARM_EXCEPTION_TRAP 2
/* The hyp-stub will return this for any kvm_call_hyp() call */
#define ARM_EXCEPTION_HYP_GONE 3
#define ARM_EXCEPTION_HYP_GONE HVC_STUB_ERR
#define KVM_ARM64_DEBUG_DIRTY_SHIFT 0
#define KVM_ARM64_DEBUG_DIRTY (1 << KVM_ARM64_DEBUG_DIRTY_SHIFT)
......@@ -47,7 +47,6 @@ struct kvm_vcpu;
extern char __kvm_hyp_init[];
extern char __kvm_hyp_init_end[];
extern char __kvm_hyp_reset[];
extern char __kvm_hyp_vector[];
......@@ -59,6 +58,8 @@ extern void __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu);
extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu);
extern u64 __vgic_v3_get_ich_vtr_el2(void);
extern u64 __vgic_v3_read_vmcr(void);
extern void __vgic_v3_write_vmcr(u32 vmcr);
extern void __vgic_v3_init_lrs(void);
extern u32 __kvm_get_mdcr_el2(void);
......
arch/arm64/include/asm/kvm_host.h
View file @ 2d3e4866
......@@ -31,7 +31,6 @@
#define __KVM_HAVE_ARCH_INTC_INITIALIZED
#define KVM_USER_MEM_SLOTS 512
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
#define KVM_HALT_POLL_NS_DEFAULT 500000
#include <kvm/arm_vgic.h>
......@@ -42,7 +41,7 @@
#define KVM_VCPU_MAX_FEATURES 4
#define KVM_REQ_VCPU_EXIT 8
#define KVM_REQ_VCPU_EXIT (8 | KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)
int __attribute_const__ kvm_target_cpu(void);
int kvm_reset_vcpu(struct kvm_vcpu *vcpu);
......@@ -362,13 +361,6 @@ static inline void __cpu_init_hyp_mode(phys_addr_t pgd_ptr,
__kvm_call_hyp((void *)pgd_ptr, hyp_stack_ptr, vector_ptr);
}
void __kvm_hyp_teardown(void);
static inline void __cpu_reset_hyp_mode(unsigned long vector_ptr,
phys_addr_t phys_idmap_start)
{
kvm_call_hyp(__kvm_hyp_teardown, phys_idmap_start);
}
static inline void kvm_arch_hardware_unsetup(void) {}
static inline void kvm_arch_sync_events(struct kvm *kvm) {}
static inline void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu) {}
......
arch/arm64/include/asm/kvm_mmu.h
View file @ 2d3e4866
......@@ -155,7 +155,6 @@ void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu);
phys_addr_t kvm_mmu_get_httbr(void);
phys_addr_t kvm_get_idmap_vector(void);
phys_addr_t kvm_get_idmap_start(void);
int kvm_mmu_init(void);
void kvm_clear_hyp_idmap(void);
......
arch/arm64/include/asm/virt.h
View file @ 2d3e4866
......@@ -19,25 +19,38 @@
#define __ASM__VIRT_H
/*
* The arm64 hcall implementation uses x0 to specify the hcall type. A value
* less than 0xfff indicates a special hcall, such as get/set vector.
* Any other value is used as a pointer to the function to call.
* The arm64 hcall implementation uses x0 to specify the hcall
* number. A value less than HVC_STUB_HCALL_NR indicates a special
* hcall, such as set vector. Any other value is handled in a
* hypervisor specific way.
*
* The hypercall is allowed to clobber any of the caller-saved
* registers (x0-x18), so it is advisable to use it through the
* indirection of a function call (as implemented in hyp-stub.S).
*/
/* HVC_GET_VECTORS - Return the value of the vbar_el2 register. */
#define HVC_GET_VECTORS 0
/*
* HVC_SET_VECTORS - Set the value of the vbar_el2 register.
*
* @x1: Physical address of the new vector table.
*/
#define HVC_SET_VECTORS 1
#define HVC_SET_VECTORS 0
/*
* HVC_SOFT_RESTART - CPU soft reset, used by the cpu_soft_restart routine.
*/
#define HVC_SOFT_RESTART 2
#define HVC_SOFT_RESTART 1
/*
* HVC_RESET_VECTORS - Restore the vectors to the original HYP stubs
*/
#define HVC_RESET_VECTORS 2
/* Max number of HYP stub hypercalls */
#define HVC_STUB_HCALL_NR 3
/* Error returned when an invalid stub number is passed into x0 */
#define HVC_STUB_ERR 0xbadca11
#define BOOT_CPU_MODE_EL1 (0xe11)
#define BOOT_CPU_MODE_EL2 (0xe12)
......@@ -61,7 +74,7 @@
extern u32 __boot_cpu_mode[2];
void __hyp_set_vectors(phys_addr_t phys_vector_base);
phys_addr_t __hyp_get_vectors(void);
void __hyp_reset_vectors(void);
/* Reports the availability of HYP mode */
static inline bool is_hyp_mode_available(void)
......
arch/arm64/include/uapi/asm/kvm.h
View file @ 2d3e4866
......@@ -39,6 +39,8 @@
#define __KVM_HAVE_IRQ_LINE
#define __KVM_HAVE_READONLY_MEM
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
#define KVM_REG_SIZE(id) \
(1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT))
......@@ -143,6 +145,8 @@ struct kvm_debug_exit_arch {
#define KVM_GUESTDBG_USE_HW (1 << 17)
struct kvm_sync_regs {
/* Used with KVM_CAP_ARM_USER_IRQ */
__u64 device_irq_level;
};
struct kvm_arch_memory_slot {
......
arch/arm64/kernel/hyp-stub.S
View file @ 2d3e4866
......@@ -55,18 +55,7 @@ ENDPROC(__hyp_stub_vectors)
.align 11
el1_sync:
mrs x30, esr_el2
lsr x30, x30, #ESR_ELx_EC_SHIFT
cmp x30, #ESR_ELx_EC_HVC64
b.ne 9f // Not an HVC trap
cmp x0, #HVC_GET_VECTORS
b.ne 1f
mrs x0, vbar_el2
b 9f
1: cmp x0, #HVC_SET_VECTORS
cmp x0, #HVC_SET_VECTORS
b.ne 2f
msr vbar_el2, x1
b 9f
......@@ -79,10 +68,15 @@ el1_sync:
mov x1, x3
br x4 // no return
3: cmp x0, #HVC_RESET_VECTORS
beq 9f // Nothing to reset!
/* Someone called kvm_call_hyp() against the hyp-stub... */
3: mov x0, #ARM_EXCEPTION_HYP_GONE
ldr x0, =HVC_STUB_ERR
eret
9: eret
9: mov x0, xzr
eret
ENDPROC(el1_sync)
.macro invalid_vector label
......@@ -121,19 +115,15 @@ ENDPROC(\label)
* initialisation entry point.
*/
ENTRY(__hyp_get_vectors)
str lr, [sp, #-16]!
mov x0, #HVC_GET_VECTORS
hvc #0
ldr lr, [sp], #16
ret
ENDPROC(__hyp_get_vectors)
ENTRY(__hyp_set_vectors)
str lr, [sp, #-16]!
mov x1, x0
mov x0, #HVC_SET_VECTORS
hvc #0
ldr lr, [sp], #16
ret
ENDPROC(__hyp_set_vectors)
ENTRY(__hyp_reset_vectors)
mov x0, #HVC_RESET_VECTORS
hvc #0
ret
ENDPROC(__hyp_reset_vectors)
arch/arm64/kvm/hyp-init.S
View file @ 2d3e4866
......@@ -22,6 +22,7 @@
#include <asm/kvm_mmu.h>
#include <asm/pgtable-hwdef.h>
#include <asm/sysreg.h>
#include <asm/virt.h>
.text
.pushsection .hyp.idmap.text, "ax"
......@@ -58,6 +59,9 @@ __invalid:
* x2: HYP vectors
*/
__do_hyp_init:
/* Check for a stub HVC call */
cmp x0, #HVC_STUB_HCALL_NR
b.lo __kvm_handle_stub_hvc
msr ttbr0_el2, x0
......@@ -119,23 +123,45 @@ __do_hyp_init:
eret
ENDPROC(__kvm_hyp_init)
ENTRY(__kvm_handle_stub_hvc)
cmp x0, #HVC_SOFT_RESTART
b.ne 1f
/* This is where we're about to jump, staying at EL2 */
msr elr_el2, x1
mov x0, #(PSR_F_BIT | PSR_I_BIT | PSR_A_BIT | PSR_D_BIT | PSR_MODE_EL2h)
msr spsr_el2, x0
/* Shuffle the arguments, and don't come back */
mov x0, x2
mov x1, x3
mov x2, x4
b reset
1: cmp x0, #HVC_RESET_VECTORS
b.ne 1f
reset:
/*
* Reset kvm back to the hyp stub.
* Reset kvm back to the hyp stub. Do not clobber x0-x4 in
* case we coming via HVC_SOFT_RESTART.
*/
ENTRY(__kvm_hyp_reset)
/* We're now in idmap, disable MMU */
mrs x0, sctlr_el2
ldr x1, =SCTLR_ELx_FLAGS
bic x0, x0, x1 // Clear SCTL_M and etc
msr sctlr_el2, x0
mrs x5, sctlr_el2
ldr x6, =SCTLR_ELx_FLAGS
bic x5, x5, x6 // Clear SCTL_M and etc
msr sctlr_el2, x5
isb
/* Install stub vectors */
adr_l x0, __hyp_stub_vectors
msr vbar_el2, x0
adr_l x5, __hyp_stub_vectors
msr vbar_el2, x5
mov x0, xzr
eret
1: /* Bad stub call */
ldr x0, =HVC_STUB_ERR
eret
ENDPROC(__kvm_hyp_reset)
ENDPROC(__kvm_handle_stub_hvc)
.ltorg
......
arch/arm64/kvm/hyp.S
View file @ 2d3e4866
......@@ -36,15 +36,12 @@
* passed in x0.
*
* A function pointer with a value less than 0xfff has a special meaning,
* and is used to implement __hyp_get_vectors in the same way as in
* and is used to implement hyp stubs in the same way as in
* arch/arm64/kernel/hyp_stub.S.
* HVC behaves as a 'bl' call and will clobber lr.
*/
ENTRY(__kvm_call_hyp)
alternative_if_not ARM64_HAS_VIRT_HOST_EXTN
str lr, [sp, #-16]!
hvc #0
ldr lr, [sp], #16
ret
alternative_else_nop_endif
b __vhe_hyp_call
......
arch/arm64/kvm/hyp/hyp-entry.S
View file @ 2d3e4866
......@@ -32,17 +32,17 @@
* Shuffle the parameters before calling the function
* pointed to in x0. Assumes parameters in x[1,2,3].
*/
str lr, [sp, #-16]!
mov lr, x0
mov x0, x1
mov x1, x2
mov x2, x3
blr lr
ldr lr, [sp], #16
.endm
ENTRY(__vhe_hyp_call)
str lr, [sp, #-16]!
do_el2_call
ldr lr, [sp], #16
/*
* We used to rely on having an exception return to get
* an implicit isb. In the E2H case, we don't have it anymore.
......@@ -53,21 +53,6 @@ ENTRY(__vhe_hyp_call)
ret
ENDPROC(__vhe_hyp_call)
/*
* Compute the idmap address of __kvm_hyp_reset based on the idmap
* start passed as a parameter, and jump there.
*
* x0: HYP phys_idmap_start
*/
ENTRY(__kvm_hyp_teardown)
mov x4, x0
adr_l x3, __kvm_hyp_reset
/* insert __kvm_hyp_reset()s offset into phys_idmap_start */
bfi x4, x3, #0, #PAGE_SHIFT
br x4
ENDPROC(__kvm_hyp_teardown)
el1_sync: // Guest trapped into EL2
stp x0, x1, [sp, #-16]!
......@@ -87,10 +72,24 @@ alternative_endif
/* Here, we're pretty sure the host called HVC. */
ldp x0, x1, [sp], #16
cmp x0, #HVC_GET_VECTORS
b.ne 1f
mrs x0, vbar_el2
b 2f
/* Check for a stub HVC call */
cmp x0, #HVC_STUB_HCALL_NR
b.hs 1f
/*
* Compute the idmap address of __kvm_handle_stub_hvc and
* jump there. Since we use kimage_voffset, do not use the
* HYP VA for __kvm_handle_stub_hvc, but the kernel VA instead
* (by loading it from the constant pool).
*
* Preserve x0-x4, which may contain stub parameters.
*/
ldr x5, =__kvm_handle_stub_hvc
ldr_l x6, kimage_voffset
/* x5 = __pa(x5) */
sub x5, x5, x6
br x5
1:
/*
......@@ -99,7 +98,7 @@ alternative_endif
kern_hyp_va x0
do_el2_call
2: eret
eret
el1_trap:
/*
......
arch/arm64/kvm/sys_regs.c
View file @ 2d3e4866
This diff is collapsed.
arch/arm64/kvm/sys_regs.h
View file @ 2d3e4866
......@@ -83,24 +83,6 @@ static inline bool read_zero(struct kvm_vcpu *vcpu,
return true;
}
static inline bool write_to_read_only(struct kvm_vcpu *vcpu,
const struct sys_reg_params *params)
{
kvm_debug("sys_reg write to read-only register at: %lx\n",
*vcpu_pc(vcpu));
print_sys_reg_instr(params);
return false;
}
static inline bool read_from_write_only(struct kvm_vcpu *vcpu,
const struct sys_reg_params *params)
{
kvm_debug("sys_reg read to write-only register at: %lx\n",
*vcpu_pc(vcpu));
print_sys_reg_instr(params);
return false;
}
/* Reset functions */
static inline void reset_unknown(struct kvm_vcpu *vcpu,
const struct sys_reg_desc *r)
......@@ -147,4 +129,9 @@ const struct sys_reg_desc *find_reg_by_id(u64 id,
#define CRm(_x) .CRm = _x
#define Op2(_x) .Op2 = _x
#define SYS_DESC(reg) \
Op0(sys_reg_Op0(reg)), Op1(sys_reg_Op1(reg)), \
CRn(sys_reg_CRn(reg)), CRm(sys_reg_CRm(reg)), \
Op2(sys_reg_Op2(reg))
#endif /* __ARM64_KVM_SYS_REGS_LOCAL_H__ */
arch/arm64/kvm/sys_regs_generic_v8.c
View file @ 2d3e4866
......@@ -52,9 +52,7 @@ static void reset_actlr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
* Important: Must be sorted ascending by Op0, Op1, CRn, CRm, Op2
*/
static const struct sys_reg_desc genericv8_sys_regs[] = {
/* ACTLR_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b0001), CRm(0b0000), Op2(0b001),
access_actlr, reset_actlr, ACTLR_EL1 },
{ SYS_DESC(SYS_ACTLR_EL1), access_actlr, reset_actlr, ACTLR_EL1 },
};
static const struct sys_reg_desc genericv8_cp15_regs[] = {
......
arch/mips/Kconfig
View file @ 2d3e4866
......@@ -1686,6 +1686,7 @@ config CPU_CAVIUM_OCTEON
select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
select MIPS_L1_CACHE_SHIFT_7
select HAVE_KVM
help
The Cavium Octeon processor is a highly integrated chip containing
many ethernet hardware widgets for networking tasks. The processor
......
arch/mips/include/asm/cpu-features.h
View file @ 2d3e4866
......@@ -444,6 +444,10 @@
# define cpu_has_msa 0
#endif
#ifndef cpu_has_ufr
# define cpu_has_ufr (cpu_data[0].options & MIPS_CPU_UFR)
#endif
#ifndef cpu_has_fre
# define cpu_has_fre (cpu_data[0].options & MIPS_CPU_FRE)
#endif
......@@ -528,6 +532,9 @@
#ifndef cpu_guest_has_htw
#define cpu_guest_has_htw (cpu_data[0].guest.options & MIPS_CPU_HTW)
#endif
#ifndef cpu_guest_has_mvh
#define cpu_guest_has_mvh (cpu_data[0].guest.options & MIPS_CPU_MVH)
#endif
#ifndef cpu_guest_has_msa
#define cpu_guest_has_msa (cpu_data[0].guest.ases & MIPS_ASE_MSA)
#endif
......@@ -543,6 +550,9 @@
#ifndef cpu_guest_has_maar
#define cpu_guest_has_maar (cpu_data[0].guest.options & MIPS_CPU_MAAR)
#endif
#ifndef cpu_guest_has_userlocal
#define cpu_guest_has_userlocal (cpu_data[0].guest.options & MIPS_CPU_ULRI)
#endif
/*
* Guest dynamic capabilities
......
arch/mips/include/asm/cpu-info.h
View file @ 2d3e4866
......@@ -33,6 +33,7 @@ struct guest_info {
unsigned long ases_dyn;
unsigned long long options;
unsigned long long options_dyn;
int tlbsize;
u8 conf;
u8 kscratch_mask;
};
......@@ -109,6 +110,7 @@ struct cpuinfo_mips {
struct guest_info guest;
unsigned int gtoffset_mask;
unsigned int guestid_mask;
unsigned int guestid_cache;
} __attribute__((aligned(SMP_CACHE_BYTES)));
extern struct cpuinfo_mips cpu_data[];
......
arch/mips/include/asm/cpu.h
View file @ 2d3e4866
......@@ -415,6 +415,7 @@ enum cpu_type_enum {
#define MIPS_CPU_GUESTCTL2 MBIT_ULL(50) /* CPU has VZ GuestCtl2 register */
#define MIPS_CPU_GUESTID MBIT_ULL(51) /* CPU uses VZ ASE GuestID feature */
#define MIPS_CPU_DRG MBIT_ULL(52) /* CPU has VZ Direct Root to Guest (DRG) */
#define MIPS_CPU_UFR MBIT_ULL(53) /* CPU supports User mode FR switching */
/*
* CPU ASE encodings
......
arch/mips/include/asm/kvm_host.h
View file @ 2d3e4866
This diff is collapsed.
arch/mips/include/asm/maar.h
View file @ 2d3e4866
......@@ -36,7 +36,7 @@ unsigned platform_maar_init(unsigned num_pairs);
* @upper: The highest address that the MAAR pair will affect. Must be
* aligned to one byte before a 2^16 byte boundary.
* @attrs: The accessibility attributes to program, eg. MIPS_MAAR_S. The
* MIPS_MAAR_V attribute will automatically be set.
* MIPS_MAAR_VL attribute will automatically be set.
*
* Program the pair of MAAR registers specified by idx to apply the attributes
* specified by attrs to the range of addresses from lower to higher.
......@@ -49,10 +49,10 @@ static inline void write_maar_pair(unsigned idx, phys_addr_t lower,
BUG_ON(((upper & 0xffff) != 0xffff)
|| ((upper & ~0xffffull) & ~(MIPS_MAAR_ADDR << 4)));
/* Automatically set MIPS_MAAR_V */
attrs |= MIPS_MAAR_V;
/* Automatically set MIPS_MAAR_VL */
attrs |= MIPS_MAAR_VL;
/* Write the upper address & attributes (only MIPS_MAAR_V matters) */
/* Write the upper address & attributes (only MIPS_MAAR_VL matters) */
write_c0_maari(idx << 1);
back_to_back_c0_hazard();
write_c0_maar(((upper >> 4) & MIPS_MAAR_ADDR) | attrs);
......@@ -81,7 +81,7 @@ extern void maar_init(void);
* @upper: The highest address that the MAAR pair will affect. Must be
* aligned to one byte before a 2^16 byte boundary.
* @attrs: The accessibility attributes to program, eg. MIPS_MAAR_S. The
* MIPS_MAAR_V attribute will automatically be set.
* MIPS_MAAR_VL attribute will automatically be set.
*
* Describes the configuration of a pair of Memory Accessibility Attribute
* Registers - applying attributes from attrs to the range of physical
......
arch/mips/include/asm/mipsregs.h
View file @ 2d3e4866
......@@ -34,8 +34,10 @@
*/
#ifdef __ASSEMBLY__
#define _ULCAST_
#define _U64CAST_
#else
#define _ULCAST_ (unsigned long)
#define _U64CAST_ (u64)
#endif
/*
......@@ -217,8 +219,10 @@
/*
* Wired register bits
*/
#define MIPSR6_WIRED_LIMIT (_ULCAST_(0xffff) << 16)
#define MIPSR6_WIRED_WIRED (_ULCAST_(0xffff) << 0)
#define MIPSR6_WIRED_LIMIT_SHIFT 16
#define MIPSR6_WIRED_LIMIT (_ULCAST_(0xffff) << MIPSR6_WIRED_LIMIT_SHIFT)
#define MIPSR6_WIRED_WIRED_SHIFT 0
#define MIPSR6_WIRED_WIRED (_ULCAST_(0xffff) << MIPSR6_WIRED_WIRED_SHIFT)
/*
* Values used for computation of new tlb entries
......@@ -645,6 +649,7 @@
#define MIPS_CONF5_LLB (_ULCAST_(1) << 4)
#define MIPS_CONF5_MVH (_ULCAST_(1) << 5)
#define MIPS_CONF5_VP (_ULCAST_(1) << 7)
#define MIPS_CONF5_SBRI (_ULCAST_(1) << 6)
#define MIPS_CONF5_FRE (_ULCAST_(1) << 8)
#define MIPS_CONF5_UFE (_ULCAST_(1) << 9)
#define MIPS_CONF5_MSAEN (_ULCAST_(1) << 27)
......@@ -719,10 +724,14 @@
#define XLR_PERFCTRL_ALLTHREADS (_ULCAST_(1) << 13)
/* MAAR bit definitions */
#define MIPS_MAAR_VH (_U64CAST_(1) << 63)
#define MIPS_MAAR_ADDR ((BIT_ULL(BITS_PER_LONG - 12) - 1) << 12)
#define MIPS_MAAR_ADDR_SHIFT 12
#define MIPS_MAAR_S (_ULCAST_(1) << 1)
#define MIPS_MAAR_V (_ULCAST_(1) << 0)
#define MIPS_MAAR_VL (_ULCAST_(1) << 0)
/* MAARI bit definitions */
#define MIPS_MAARI_INDEX (_ULCAST_(0x3f) << 0)
/* EBase bit definitions */
#define MIPS_EBASE_CPUNUM_SHIFT 0
......@@ -736,6 +745,10 @@
#define MIPS_CMGCRB_BASE 11
#define MIPS_CMGCRF_BASE (~_ULCAST_((1 << MIPS_CMGCRB_BASE) - 1))
/* LLAddr bit definitions */
#define MIPS_LLADDR_LLB_SHIFT 0
#define MIPS_LLADDR_LLB (_ULCAST_(1) << MIPS_LLADDR_LLB_SHIFT)
/*
* Bits in the MIPS32 Memory Segmentation registers.
*/
......@@ -961,6 +974,22 @@
/* Flush FTLB */
#define LOONGSON_DIAG_FTLB (_ULCAST_(1) << 13)
/* CvmCtl register field definitions */
#define CVMCTL_IPPCI_SHIFT 7
#define CVMCTL_IPPCI (_U64CAST_(0x7) << CVMCTL_IPPCI_SHIFT)
#define CVMCTL_IPTI_SHIFT 4
#define CVMCTL_IPTI (_U64CAST_(0x7) << CVMCTL_IPTI_SHIFT)
/* CvmMemCtl2 register field definitions */
#define CVMMEMCTL2_INHIBITTS (_U64CAST_(1) << 17)
/* CvmVMConfig register field definitions */
#define CVMVMCONF_DGHT (_U64CAST_(1) << 60)
#define CVMVMCONF_MMUSIZEM1_S 12
#define CVMVMCONF_MMUSIZEM1 (_U64CAST_(0xff) << CVMVMCONF_MMUSIZEM1_S)
#define CVMVMCONF_RMMUSIZEM1_S 0
#define CVMVMCONF_RMMUSIZEM1 (_U64CAST_(0xff) << CVMVMCONF_RMMUSIZEM1_S)
/*
* Coprocessor 1 (FPU) register names
*/
......@@ -1720,6 +1749,13 @@ do { \
#define read_c0_cvmmemctl() __read_64bit_c0_register($11, 7)
#define write_c0_cvmmemctl(val) __write_64bit_c0_register($11, 7, val)
#define read_c0_cvmmemctl2() __read_64bit_c0_register($16, 6)
#define write_c0_cvmmemctl2(val) __write_64bit_c0_register($16, 6, val)
#define read_c0_cvmvmconfig() __read_64bit_c0_register($16, 7)
#define write_c0_cvmvmconfig(val) __write_64bit_c0_register($16, 7, val)
/*
* The cacheerr registers are not standardized. On OCTEON, they are
* 64 bits wide.
......@@ -1989,6 +2025,8 @@ do { \
#define read_gc0_epc() __read_ulong_gc0_register(14, 0)
#define write_gc0_epc(val) __write_ulong_gc0_register(14, 0, val)
#define read_gc0_prid() __read_32bit_gc0_register(15, 0)
#define read_gc0_ebase() __read_32bit_gc0_register(15, 1)
#define write_gc0_ebase(val) __write_32bit_gc0_register(15, 1, val)
......@@ -2012,6 +2050,9 @@ do { \
#define write_gc0_config6(val) __write_32bit_gc0_register(16, 6, val)
#define write_gc0_config7(val) __write_32bit_gc0_register(16, 7, val)
#define read_gc0_lladdr() __read_ulong_gc0_register(17, 0)
#define write_gc0_lladdr(val) __write_ulong_gc0_register(17, 0, val)
#define read_gc0_watchlo0() __read_ulong_gc0_register(18, 0)
#define read_gc0_watchlo1() __read_ulong_gc0_register(18, 1)
#define read_gc0_watchlo2() __read_ulong_gc0_register(18, 2)
......@@ -2090,6 +2131,19 @@ do { \
#define write_gc0_kscratch5(val) __write_ulong_gc0_register(31, 6, val)
#define write_gc0_kscratch6(val) __write_ulong_gc0_register(31, 7, val)
/* Cavium OCTEON (cnMIPS) */
#define read_gc0_cvmcount() __read_ulong_gc0_register(9, 6)
#define write_gc0_cvmcount(val) __write_ulong_gc0_register(9, 6, val)
#define read_gc0_cvmctl() __read_64bit_gc0_register(9, 7)
#define write_gc0_cvmctl(val) __write_64bit_gc0_register(9, 7, val)
#define read_gc0_cvmmemctl() __read_64bit_gc0_register(11, 7)
#define write_gc0_cvmmemctl(val) __write_64bit_gc0_register(11, 7, val)
#define read_gc0_cvmmemctl2() __read_64bit_gc0_register(16, 6)
#define write_gc0_cvmmemctl2(val) __write_64bit_gc0_register(16, 6, val)
/*
* Macros to access the floating point coprocessor control registers
*/
......@@ -2696,9 +2750,11 @@ __BUILD_SET_C0(brcm_mode)
*/
#define __BUILD_SET_GC0(name) __BUILD_SET_COMMON(gc0_##name)
__BUILD_SET_GC0(wired)
__BUILD_SET_GC0(status)
__BUILD_SET_GC0(cause)
__BUILD_SET_GC0(ebase)
__BUILD_SET_GC0(config1)
/*
* Return low 10 bits of ebase.
......
arch/mips/include/asm/tlb.h
View file @ 2d3e4866
......@@ -21,9 +21,11 @@
*/
#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
#define UNIQUE_ENTRYHI(idx) \
((CKSEG0 + ((idx) << (PAGE_SHIFT + 1))) | \
#define _UNIQUE_ENTRYHI(base, idx) \
(((base) + ((idx) << (PAGE_SHIFT + 1))) | \
(cpu_has_tlbinv ? MIPS_ENTRYHI_EHINV : 0))
#define UNIQUE_ENTRYHI(idx) _UNIQUE_ENTRYHI(CKSEG0, idx)
#define UNIQUE_GUEST_ENTRYHI(idx) _UNIQUE_ENTRYHI(CKSEG1, idx)
static inline unsigned int num_wired_entries(void)
{
......
arch/mips/include/uapi/asm/inst.h
View file @ 2d3e4866
......@@ -179,7 +179,7 @@ enum cop0_coi_func {
tlbr_op = 0x01, tlbwi_op = 0x02,
tlbwr_op = 0x06, tlbp_op = 0x08,
rfe_op = 0x10, eret_op = 0x18,
wait_op = 0x20,
wait_op = 0x20, hypcall_op = 0x28
};
/*
......
arch/mips/include/uapi/asm/kvm.h
View file @ 2d3e4866
......@@ -21,6 +21,8 @@
#define __KVM_HAVE_READONLY_MEM
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
/*
* for KVM_GET_REGS and KVM_SET_REGS
*
......@@ -54,10 +56,15 @@ struct kvm_fpu {
* Register set = 0: GP registers from kvm_regs (see definitions below).
*
* Register set = 1: CP0 registers.
* bits[15..8] - Must be zero.
* bits[15..8] - COP0 register set.
*
* COP0 register set = 0: Main CP0 registers.
* bits[7..3] - Register 'rd' index.
* bits[2..0] - Register 'sel' index.
*
* COP0 register set = 1: MAARs.
* bits[7..0] - MAAR index.
*
* Register set = 2: KVM specific registers (see definitions below).
*
* Register set = 3: FPU / MSA registers (see definitions below).
......@@ -114,6 +121,15 @@ struct kvm_fpu {
#define KVM_REG_MIPS_PC (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 34)
/*
* KVM_REG_MIPS_CP0 - Coprocessor 0 registers.
*/
#define KVM_REG_MIPS_MAAR (KVM_REG_MIPS_CP0 | (1 << 8))
#define KVM_REG_MIPS_CP0_MAAR(n) (KVM_REG_MIPS_MAAR | \
KVM_REG_SIZE_U64 | (n))
/*
* KVM_REG_MIPS_KVM - KVM specific control registers.
*/
......
arch/mips/kernel/cpu-probe.c
View file @ 2d3e4866
......@@ -289,6 +289,8 @@ static void cpu_set_fpu_opts(struct cpuinfo_mips *c)
MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
if (c->fpu_id & MIPS_FPIR_3D)
c->ases |= MIPS_ASE_MIPS3D;
if (c->fpu_id & MIPS_FPIR_UFRP)
c->options |= MIPS_CPU_UFR;
if (c->fpu_id & MIPS_FPIR_FREP)
c->options |= MIPS_CPU_FRE;
}
......@@ -1003,7 +1005,8 @@ static inline unsigned int decode_guest_config3(struct cpuinfo_mips *c)
unsigned int config3, config3_dyn;
probe_gc0_config_dyn(config3, config3, config3_dyn,
MIPS_CONF_M | MIPS_CONF3_MSA | MIPS_CONF3_CTXTC);
MIPS_CONF_M | MIPS_CONF3_MSA | MIPS_CONF3_ULRI |
MIPS_CONF3_CTXTC);
if (config3 & MIPS_CONF3_CTXTC)
c->guest.options |= MIPS_CPU_CTXTC;
......@@ -1013,6 +1016,9 @@ static inline unsigned int decode_guest_config3(struct cpuinfo_mips *c)
if (config3 & MIPS_CONF3_PW)
c->guest.options |= MIPS_CPU_HTW;
if (config3 & MIPS_CONF3_ULRI)
c->guest.options |= MIPS_CPU_ULRI;
if (config3 & MIPS_CONF3_SC)
c->guest.options |= MIPS_CPU_SEGMENTS;
......@@ -1051,7 +1057,7 @@ static inline unsigned int decode_guest_config5(struct cpuinfo_mips *c)
unsigned int config5, config5_dyn;
probe_gc0_config_dyn(config5, config5, config5_dyn,
MIPS_CONF_M | MIPS_CONF5_MRP);
MIPS_CONF_M | MIPS_CONF5_MVH | MIPS_CONF5_MRP);
if (config5 & MIPS_CONF5_MRP)
c->guest.options |= MIPS_CPU_MAAR;
......@@ -1061,6 +1067,9 @@ static inline unsigned int decode_guest_config5(struct cpuinfo_mips *c)
if (config5 & MIPS_CONF5_LLB)
c->guest.options |= MIPS_CPU_RW_LLB;
if (config5 & MIPS_CONF5_MVH)
c->guest.options |= MIPS_CPU_MVH;
if (config5 & MIPS_CONF_M)
c->guest.conf |= BIT(6);
return config5 & MIPS_CONF_M;
......
arch/mips/kernel/time.c
View file @ 2d3e4866
......@@ -70,6 +70,7 @@ EXPORT_SYMBOL(perf_irq);
*/
unsigned int mips_hpt_frequency;
EXPORT_SYMBOL_GPL(mips_hpt_frequency);
/*
* This function exists in order to cause an error due to a duplicate
......
arch/mips/kvm/Kconfig
View file @ 2d3e4866
......@@ -26,11 +26,34 @@ config KVM
select SRCU
---help---
Support for hosting Guest kernels.
Currently supported on MIPS32 processors.
choice
prompt "Virtualization mode"
depends on KVM
default KVM_MIPS_TE
config KVM_MIPS_TE
bool "Trap & Emulate"
---help---
Use trap and emulate to virtualize 32-bit guests in user mode. This
does not require any special hardware Virtualization support beyond
standard MIPS32/64 r2 or later, but it does require the guest kernel
to be configured with CONFIG_KVM_GUEST=y so that it resides in the
user address segment.
config KVM_MIPS_VZ
bool "MIPS Virtualization (VZ) ASE"
---help---
Use the MIPS Virtualization (VZ) ASE to virtualize guests. This
supports running unmodified guest kernels (with CONFIG_KVM_GUEST=n),
but requires hardware support.
endchoice
config KVM_MIPS_DYN_TRANS
bool "KVM/MIPS: Dynamic binary translation to reduce traps"
depends on KVM
depends on KVM_MIPS_TE
default y
---help---
When running in Trap & Emulate mode patch privileged
instructions to reduce the number of traps.
......
arch/mips/kvm/Makefile
View file @ 2d3e4866
......@@ -9,8 +9,15 @@ common-objs-$(CONFIG_CPU_HAS_MSA) += msa.o
kvm-objs := $(common-objs-y) mips.o emulate.o entry.o \
interrupt.o stats.o commpage.o \
dyntrans.o trap_emul.o fpu.o
fpu.o
kvm-objs += hypcall.o
kvm-objs += mmu.o
ifdef CONFIG_KVM_MIPS_VZ
kvm-objs += vz.o
else
kvm-objs += dyntrans.o
kvm-objs += trap_emul.o
endif
obj-$(CONFIG_KVM) += kvm.o
obj-y += callback.o tlb.o
arch/mips/kvm/emulate.c
View file @ 2d3e4866
This diff is collapsed.
arch/mips/kvm/entry.c
View file @ 2d3e4866
......@@ -51,12 +51,15 @@
#define RA 31
/* Some CP0 registers */
#define C0_PWBASE 5, 5
#define C0_HWRENA 7, 0
#define C0_BADVADDR 8, 0
#define C0_BADINSTR 8, 1
#define C0_BADINSTRP 8, 2
#define C0_ENTRYHI 10, 0
#define C0_GUESTCTL1 10, 4
#define C0_STATUS 12, 0
#define C0_GUESTCTL0 12, 6
#define C0_CAUSE 13, 0
#define C0_EPC 14, 0
#define C0_EBASE 15, 1
......@@ -292,8 +295,8 @@ static void *kvm_mips_build_enter_guest(void *addr)
unsigned int i;
struct uasm_label labels[2];
struct uasm_reloc relocs[2];
struct uasm_label *l = labels;
struct uasm_reloc *r = relocs;
struct uasm_label __maybe_unused *l = labels;
struct uasm_reloc __maybe_unused *r = relocs;
memset(labels, 0, sizeof(labels));
memset(relocs, 0, sizeof(relocs));
......@@ -302,7 +305,67 @@ static void *kvm_mips_build_enter_guest(void *addr)
UASM_i_LW(&p, T0, offsetof(struct kvm_vcpu_arch, pc), K1);
UASM_i_MTC0(&p, T0, C0_EPC);
/* Set the ASID for the Guest Kernel */
#ifdef CONFIG_KVM_MIPS_VZ
/* Save normal linux process pgd (VZ guarantees pgd_reg is set) */
UASM_i_MFC0(&p, K0, c0_kscratch(), pgd_reg);
UASM_i_SW(&p, K0, offsetof(struct kvm_vcpu_arch, host_pgd), K1);
/*
* Set up KVM GPA pgd.
* This does roughly the same as TLBMISS_HANDLER_SETUP_PGD():
* - call tlbmiss_handler_setup_pgd(mm->pgd)
* - write mm->pgd into CP0_PWBase
*
* We keep S0 pointing at struct kvm so we can load the ASID below.
*/
UASM_i_LW(&p, S0, (int)offsetof(struct kvm_vcpu, kvm) -
(int)offsetof(struct kvm_vcpu, arch), K1);
UASM_i_LW(&p, A0, offsetof(struct kvm, arch.gpa_mm.pgd), S0);
UASM_i_LA(&p, T9, (unsigned long)tlbmiss_handler_setup_pgd);
uasm_i_jalr(&p, RA, T9);
/* delay slot */
if (cpu_has_htw)
UASM_i_MTC0(&p, A0, C0_PWBASE);
else
uasm_i_nop(&p);
/* Set GM bit to setup eret to VZ guest context */
uasm_i_addiu(&p, V1, ZERO, 1);
uasm_i_mfc0(&p, K0, C0_GUESTCTL0);
uasm_i_ins(&p, K0, V1, MIPS_GCTL0_GM_SHIFT, 1);
uasm_i_mtc0(&p, K0, C0_GUESTCTL0);
if (cpu_has_guestid) {
/*
* Set root mode GuestID, so that root TLB refill handler can
* use the correct GuestID in the root TLB.
*/
/* Get current GuestID */
uasm_i_mfc0(&p, T0, C0_GUESTCTL1);
/* Set GuestCtl1.RID = GuestCtl1.ID */
uasm_i_ext(&p, T1, T0, MIPS_GCTL1_ID_SHIFT,
MIPS_GCTL1_ID_WIDTH);
uasm_i_ins(&p, T0, T1, MIPS_GCTL1_RID_SHIFT,
MIPS_GCTL1_RID_WIDTH);
uasm_i_mtc0(&p, T0, C0_GUESTCTL1);
/* GuestID handles dealiasing so we don't need to touch ASID */
goto skip_asid_restore;
}
/* Root ASID Dealias (RAD) */
/* Save host ASID */
UASM_i_MFC0(&p, K0, C0_ENTRYHI);
UASM_i_SW(&p, K0, offsetof(struct kvm_vcpu_arch, host_entryhi),
K1);
/* Set the root ASID for the Guest */
UASM_i_ADDIU(&p, T1, S0,
offsetof(struct kvm, arch.gpa_mm.context.asid));
#else
/* Set the ASID for the Guest Kernel or User */
UASM_i_LW(&p, T0, offsetof(struct kvm_vcpu_arch, cop0), K1);
UASM_i_LW(&p, T0, offsetof(struct mips_coproc, reg[MIPS_CP0_STATUS][0]),
T0);
......@@ -315,6 +378,7 @@ static void *kvm_mips_build_enter_guest(void *addr)
UASM_i_ADDIU(&p, T1, K1, offsetof(struct kvm_vcpu_arch,
guest_user_mm.context.asid));
uasm_l_kernel_asid(&l, p);
#endif
/* t1: contains the base of the ASID array, need to get the cpu id */
/* smp_processor_id */
......@@ -339,6 +403,7 @@ static void *kvm_mips_build_enter_guest(void *addr)
uasm_i_andi(&p, K0, K0, MIPS_ENTRYHI_ASID);
#endif
#ifndef CONFIG_KVM_MIPS_VZ
/*
* Set up KVM T&E GVA pgd.
* This does roughly the same as TLBMISS_HANDLER_SETUP_PGD():
......@@ -351,7 +416,11 @@ static void *kvm_mips_build_enter_guest(void *addr)
UASM_i_LA(&p, T9, (unsigned long)tlbmiss_handler_setup_pgd);
uasm_i_jalr(&p, RA, T9);
uasm_i_mtc0(&p, K0, C0_ENTRYHI);
#else
/* Set up KVM VZ root ASID (!guestid) */
uasm_i_mtc0(&p, K0, C0_ENTRYHI);
skip_asid_restore:
#endif
uasm_i_ehb(&p);
/* Disable RDHWR access */
......@@ -559,13 +628,10 @@ void *kvm_mips_build_exit(void *addr)
/* Now that context has been saved, we can use other registers */
/* Restore vcpu */
UASM_i_MFC0(&p, A1, scratch_vcpu[0], scratch_vcpu[1]);
uasm_i_move(&p, S1, A1);
UASM_i_MFC0(&p, S1, scratch_vcpu[0], scratch_vcpu[1]);
/* Restore run (vcpu->run) */
UASM_i_LW(&p, A0, offsetof(struct kvm_vcpu, run), A1);
/* Save pointer to run in s0, will be saved by the compiler */
uasm_i_move(&p, S0, A0);
UASM_i_LW(&p, S0, offsetof(struct kvm_vcpu, run), S1);
/*
* Save Host level EPC, BadVaddr and Cause to VCPU, useful to process
......@@ -641,6 +707,52 @@ void *kvm_mips_build_exit(void *addr)
uasm_l_msa_1(&l, p);
}
#ifdef CONFIG_KVM_MIPS_VZ
/* Restore host ASID */
if (!cpu_has_guestid) {
UASM_i_LW(&p, K0, offsetof(struct kvm_vcpu_arch, host_entryhi),
K1);
UASM_i_MTC0(&p, K0, C0_ENTRYHI);
}
/*
* Set up normal Linux process pgd.
* This does roughly the same as TLBMISS_HANDLER_SETUP_PGD():
* - call tlbmiss_handler_setup_pgd(mm->pgd)
* - write mm->pgd into CP0_PWBase
*/
UASM_i_LW(&p, A0,
offsetof(struct kvm_vcpu_arch, host_pgd), K1);
UASM_i_LA(&p, T9, (unsigned long)tlbmiss_handler_setup_pgd);
uasm_i_jalr(&p, RA, T9);
/* delay slot */
if (cpu_has_htw)
UASM_i_MTC0(&p, A0, C0_PWBASE);
else
uasm_i_nop(&p);
/* Clear GM bit so we don't enter guest mode when EXL is cleared */
uasm_i_mfc0(&p, K0, C0_GUESTCTL0);
uasm_i_ins(&p, K0, ZERO, MIPS_GCTL0_GM_SHIFT, 1);
uasm_i_mtc0(&p, K0, C0_GUESTCTL0);
/* Save GuestCtl0 so we can access GExcCode after CPU migration */
uasm_i_sw(&p, K0,
offsetof(struct kvm_vcpu_arch, host_cp0_guestctl0), K1);
if (cpu_has_guestid) {
/*
* Clear root mode GuestID, so that root TLB operations use the
* root GuestID in the root TLB.
*/
uasm_i_mfc0(&p, T0, C0_GUESTCTL1);
/* Set GuestCtl1.RID = MIPS_GCTL1_ROOT_GUESTID (i.e. 0) */
uasm_i_ins(&p, T0, ZERO, MIPS_GCTL1_RID_SHIFT,
MIPS_GCTL1_RID_WIDTH);
uasm_i_mtc0(&p, T0, C0_GUESTCTL1);
}
#endif
/* Now that the new EBASE has been loaded, unset BEV and KSU_USER */
uasm_i_addiu(&p, AT, ZERO, ~(ST0_EXL | KSU_USER | ST0_IE));
uasm_i_and(&p, V0, V0, AT);
......@@ -680,6 +792,8 @@ void *kvm_mips_build_exit(void *addr)
* Now jump to the kvm_mips_handle_exit() to see if we can deal
* with this in the kernel
*/
uasm_i_move(&p, A0, S0);
uasm_i_move(&p, A1, S1);
UASM_i_LA(&p, T9, (unsigned long)kvm_mips_handle_exit);
uasm_i_jalr(&p, RA, T9);
UASM_i_ADDIU(&p, SP, SP, -CALLFRAME_SIZ);
......
arch/mips/kvm/hypcall.c 0 → 100644
View file @ 2d3e4866
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* KVM/MIPS: Hypercall handling.
*
* Copyright (C) 2015 Imagination Technologies Ltd.
*/
#include <linux/kernel.h>
#include <linux/kvm_host.h>
#include <linux/kvm_para.h>
#define MAX_HYPCALL_ARGS 4
enum emulation_result kvm_mips_emul_hypcall(struct kvm_vcpu *vcpu,
union mips_instruction inst)
{
unsigned int code = (inst.co_format.code >> 5) & 0x3ff;
kvm_debug("[%#lx] HYPCALL %#03x\n", vcpu->arch.pc, code);
switch (code) {
case 0:
return EMULATE_HYPERCALL;
default:
return EMULATE_FAIL;
};
}
static int kvm_mips_hypercall(struct kvm_vcpu *vcpu, unsigned long num,
const unsigned long *args, unsigned long *hret)
{
/* Report unimplemented hypercall to guest */
*hret = -KVM_ENOSYS;
return RESUME_GUEST;
}
int kvm_mips_handle_hypcall(struct kvm_vcpu *vcpu)
{
unsigned long num, args[MAX_HYPCALL_ARGS];
/* read hypcall number and arguments */
num = vcpu->arch.gprs[2]; /* v0 */
args[0] = vcpu->arch.gprs[4]; /* a0 */
args[1] = vcpu->arch.gprs[5]; /* a1 */
args[2] = vcpu->arch.gprs[6]; /* a2 */
args[3] = vcpu->arch.gprs[7]; /* a3 */
return kvm_mips_hypercall(vcpu, num,
args, &vcpu->arch.gprs[2] /* v0 */);
}
arch/mips/kvm/interrupt.h
View file @ 2d3e4866
......@@ -30,8 +30,13 @@
#define C_TI (_ULCAST_(1) << 30)
#ifdef CONFIG_KVM_MIPS_VZ
#define KVM_MIPS_IRQ_DELIVER_ALL_AT_ONCE (1)
#define KVM_MIPS_IRQ_CLEAR_ALL_AT_ONCE (1)
#else
#define KVM_MIPS_IRQ_DELIVER_ALL_AT_ONCE (0)
#define KVM_MIPS_IRQ_CLEAR_ALL_AT_ONCE (0)
#endif
void kvm_mips_queue_irq(struct kvm_vcpu *vcpu, unsigned int priority);
void kvm_mips_dequeue_irq(struct kvm_vcpu *vcpu, unsigned int priority);
......
arch/mips/kvm/mips.c
View file @ 2d3e4866
......@@ -59,6 +59,16 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
{ "fpe", VCPU_STAT(fpe_exits), KVM_STAT_VCPU },
{ "msa_disabled", VCPU_STAT(msa_disabled_exits), KVM_STAT_VCPU },
{ "flush_dcache", VCPU_STAT(flush_dcache_exits), KVM_STAT_VCPU },
#ifdef CONFIG_KVM_MIPS_VZ
{ "vz_gpsi", VCPU_STAT(vz_gpsi_exits), KVM_STAT_VCPU },
{ "vz_gsfc", VCPU_STAT(vz_gsfc_exits), KVM_STAT_VCPU },
{ "vz_hc", VCPU_STAT(vz_hc_exits), KVM_STAT_VCPU },
{ "vz_grr", VCPU_STAT(vz_grr_exits), KVM_STAT_VCPU },
{ "vz_gva", VCPU_STAT(vz_gva_exits), KVM_STAT_VCPU },
{ "vz_ghfc", VCPU_STAT(vz_ghfc_exits), KVM_STAT_VCPU },
{ "vz_gpa", VCPU_STAT(vz_gpa_exits), KVM_STAT_VCPU },
{ "vz_resvd", VCPU_STAT(vz_resvd_exits), KVM_STAT_VCPU },
#endif
{ "halt_successful_poll", VCPU_STAT(halt_successful_poll), KVM_STAT_VCPU },
{ "halt_attempted_poll", VCPU_STAT(halt_attempted_poll), KVM_STAT_VCPU },
{ "halt_poll_invalid", VCPU_STAT(halt_poll_invalid), KVM_STAT_VCPU },
......@@ -66,6 +76,19 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
{NULL}
};
bool kvm_trace_guest_mode_change;
int kvm_guest_mode_change_trace_reg(void)
{
kvm_trace_guest_mode_change = 1;
return 0;
}
void kvm_guest_mode_change_trace_unreg(void)
{
kvm_trace_guest_mode_change = 0;
}
/*
* XXXKYMA: We are simulatoring a processor that has the WII bit set in
* Config7, so we are "runnable" if interrupts are pending
......@@ -82,7 +105,12 @@ int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu)
int kvm_arch_hardware_enable(void)
{
return 0;
return kvm_mips_callbacks->hardware_enable();
}
void kvm_arch_hardware_disable(void)
{
kvm_mips_callbacks->hardware_disable();
}
int kvm_arch_hardware_setup(void)
......@@ -97,6 +125,18 @@ void kvm_arch_check_processor_compat(void *rtn)
int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
{
switch (type) {
#ifdef CONFIG_KVM_MIPS_VZ
case KVM_VM_MIPS_VZ:
#else
case KVM_VM_MIPS_TE:
#endif
break;
default:
/* Unsupported KVM type */
return -EINVAL;
};
/* Allocate page table to map GPA -> RPA */
kvm->arch.gpa_mm.pgd = kvm_pgd_alloc();
if (!kvm->arch.gpa_mm.pgd)
......@@ -301,8 +341,10 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id)
/* Build guest exception vectors dynamically in unmapped memory */
handler = gebase + 0x2000;
/* TLB refill */
/* TLB refill (or XTLB refill on 64-bit VZ where KX=1) */
refill_start = gebase;
if (IS_ENABLED(CONFIG_KVM_MIPS_VZ) && IS_ENABLED(CONFIG_64BIT))
refill_start += 0x080;
refill_end = kvm_mips_build_tlb_refill_exception(refill_start, handler);
/* General Exception Entry point */
......@@ -353,9 +395,7 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id)
/* Init */
vcpu->arch.last_sched_cpu = -1;
/* Start off the timer */
kvm_mips_init_count(vcpu);
vcpu->arch.last_exec_cpu = -1;
return vcpu;
......@@ -1030,9 +1070,6 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
case KVM_CAP_IMMEDIATE_EXIT:
r = 1;
break;
case KVM_CAP_COALESCED_MMIO:
r = KVM_COALESCED_MMIO_PAGE_OFFSET;
break;
case KVM_CAP_NR_VCPUS:
r = num_online_cpus();
break;
......@@ -1059,7 +1096,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
r = cpu_has_msa && !(boot_cpu_data.msa_id & MSA_IR_WRPF);
break;
default:
r = 0;
r = kvm_mips_callbacks->check_extension(kvm, ext);
break;
}
return r;
......@@ -1067,7 +1104,8 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
{
return kvm_mips_pending_timer(vcpu);
return kvm_mips_pending_timer(vcpu) ||
kvm_read_c0_guest_cause(vcpu->arch.cop0) & C_TI;
}
int kvm_arch_vcpu_dump_regs(struct kvm_vcpu *vcpu)
......@@ -1092,7 +1130,7 @@ int kvm_arch_vcpu_dump_regs(struct kvm_vcpu *vcpu)
kvm_debug("\tlo: 0x%08lx\n", vcpu->arch.lo);
cop0 = vcpu->arch.cop0;
kvm_debug("\tStatus: 0x%08lx, Cause: 0x%08lx\n",
kvm_debug("\tStatus: 0x%08x, Cause: 0x%08x\n",
kvm_read_c0_guest_status(cop0),
kvm_read_c0_guest_cause(cop0));
......@@ -1208,6 +1246,7 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
vcpu->mode = OUTSIDE_GUEST_MODE;
/* re-enable HTW before enabling interrupts */
if (!IS_ENABLED(CONFIG_KVM_MIPS_VZ))
htw_start();
/* Set a default exit reason */
......@@ -1226,9 +1265,11 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
cause, opc, run, vcpu);
trace_kvm_exit(vcpu, exccode);
if (!IS_ENABLED(CONFIG_KVM_MIPS_VZ)) {
/*
* Do a privilege check, if in UM most of these exit conditions end up
* causing an exception to be delivered to the Guest Kernel
* Do a privilege check, if in UM most of these exit conditions
* end up causing an exception to be delivered to the Guest
* Kernel
*/
er = kvm_mips_check_privilege(cause, opc, run, vcpu);
if (er == EMULATE_PRIV_FAIL) {
......@@ -1238,6 +1279,7 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
ret = RESUME_HOST;
goto skip_emul;
}
}
switch (exccode) {
case EXCCODE_INT:
......@@ -1267,7 +1309,7 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
break;
case EXCCODE_TLBS:
kvm_debug("TLB ST fault: cause %#x, status %#lx, PC: %p, BadVaddr: %#lx\n",
kvm_debug("TLB ST fault: cause %#x, status %#x, PC: %p, BadVaddr: %#lx\n",
cause, kvm_read_c0_guest_status(vcpu->arch.cop0), opc,
badvaddr);
......@@ -1328,12 +1370,17 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
ret = kvm_mips_callbacks->handle_msa_disabled(vcpu);
break;
case EXCCODE_GE:
/* defer exit accounting to handler */
ret = kvm_mips_callbacks->handle_guest_exit(vcpu);
break;
default:
if (cause & CAUSEF_BD)
opc += 1;
inst = 0;
kvm_get_badinstr(opc, vcpu, &inst);
kvm_err("Exception Code: %d, not yet handled, @ PC: %p, inst: 0x%08x BadVaddr: %#lx Status: %#lx\n",
kvm_err("Exception Code: %d, not yet handled, @ PC: %p, inst: 0x%08x BadVaddr: %#lx Status: %#x\n",
exccode, opc, inst, badvaddr,
kvm_read_c0_guest_status(vcpu->arch.cop0));
kvm_arch_vcpu_dump_regs(vcpu);
......@@ -1346,6 +1393,9 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
skip_emul:
local_irq_disable();
if (ret == RESUME_GUEST)
kvm_vz_acquire_htimer(vcpu);
if (er == EMULATE_DONE && !(ret & RESUME_HOST))
kvm_mips_deliver_interrupts(vcpu, cause);
......@@ -1391,6 +1441,7 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
}
/* Disable HTW before returning to guest or host */
if (!IS_ENABLED(CONFIG_KVM_MIPS_VZ))
htw_stop();
return ret;
......@@ -1527,16 +1578,18 @@ void kvm_drop_fpu(struct kvm_vcpu *vcpu)
void kvm_lose_fpu(struct kvm_vcpu *vcpu)
{
/*
* FPU & MSA get disabled in root context (hardware) when it is disabled
* in guest context (software), but the register state in the hardware
* may still be in use. This is why we explicitly re-enable the hardware
* before saving.
* With T&E, FPU & MSA get disabled in root context (hardware) when it
* is disabled in guest context (software), but the register state in
* the hardware may still be in use.
* This is why we explicitly re-enable the hardware before saving.
*/
preempt_disable();
if (cpu_has_msa && vcpu->arch.aux_inuse & KVM_MIPS_AUX_MSA) {
if (!IS_ENABLED(CONFIG_KVM_MIPS_VZ)) {
set_c0_config5(MIPS_CONF5_MSAEN);
enable_fpu_hazard();
}
__kvm_save_msa(&vcpu->arch);
trace_kvm_aux(vcpu, KVM_TRACE_AUX_SAVE, KVM_TRACE_AUX_FPU_MSA);
......@@ -1549,8 +1602,10 @@ void kvm_lose_fpu(struct kvm_vcpu *vcpu)
}
vcpu->arch.aux_inuse &= ~(KVM_MIPS_AUX_FPU | KVM_MIPS_AUX_MSA);
} else if (vcpu->arch.aux_inuse & KVM_MIPS_AUX_FPU) {
if (!IS_ENABLED(CONFIG_KVM_MIPS_VZ)) {
set_c0_status(ST0_CU1);
enable_fpu_hazard();
}
__kvm_save_fpu(&vcpu->arch);
vcpu->arch.aux_inuse &= ~KVM_MIPS_AUX_FPU;
......
arch/mips/kvm/mmu.c
View file @ 2d3e4866
......@@ -992,6 +992,22 @@ static pte_t kvm_mips_gpa_pte_to_gva_mapped(pte_t pte, long entrylo)
return kvm_mips_gpa_pte_to_gva_unmapped(pte);
}
#ifdef CONFIG_KVM_MIPS_VZ
int kvm_mips_handle_vz_root_tlb_fault(unsigned long badvaddr,
struct kvm_vcpu *vcpu,
bool write_fault)
{
int ret;
ret = kvm_mips_map_page(vcpu, badvaddr, write_fault, NULL, NULL);
if (ret)
return ret;
/* Invalidate this entry in the TLB */
return kvm_vz_host_tlb_inv(vcpu, badvaddr);
}
#endif
/* XXXKYMA: Must be called with interrupts disabled */
int kvm_mips_handle_kseg0_tlb_fault(unsigned long badvaddr,
struct kvm_vcpu *vcpu,
......@@ -1225,6 +1241,10 @@ int kvm_get_inst(u32 *opc, struct kvm_vcpu *vcpu, u32 *out)
{
int err;
if (WARN(IS_ENABLED(CONFIG_KVM_MIPS_VZ),
"Expect BadInstr/BadInstrP registers to be used with VZ\n"))
return -EINVAL;
retry:
kvm_trap_emul_gva_lockless_begin(vcpu);
err = get_user(*out, opc);
......
arch/mips/kvm/tlb.c
View file @ 2d3e4866
This diff is collapsed.
arch/mips/kvm/trace.h
View file @ 2d3e4866
......@@ -17,6 +17,13 @@
#define TRACE_INCLUDE_PATH .
#define TRACE_INCLUDE_FILE trace
/*
* arch/mips/kvm/mips.c
*/
extern bool kvm_trace_guest_mode_change;
int kvm_guest_mode_change_trace_reg(void);
void kvm_guest_mode_change_trace_unreg(void);
/*
* Tracepoints for VM enters
*/
......@@ -62,10 +69,20 @@ DEFINE_EVENT(kvm_transition, kvm_out,
#define KVM_TRACE_EXIT_MSA_FPE 14
#define KVM_TRACE_EXIT_FPE 15
#define KVM_TRACE_EXIT_MSA_DISABLED 21
#define KVM_TRACE_EXIT_GUEST_EXIT 27
/* Further exit reasons */
#define KVM_TRACE_EXIT_WAIT 32
#define KVM_TRACE_EXIT_CACHE 33
#define KVM_TRACE_EXIT_SIGNAL 34
/* 32 exit reasons correspond to GuestCtl0.GExcCode (VZ) */
#define KVM_TRACE_EXIT_GEXCCODE_BASE 64
#define KVM_TRACE_EXIT_GPSI 64 /* 0 */
#define KVM_TRACE_EXIT_GSFC 65 /* 1 */
#define KVM_TRACE_EXIT_HC 66 /* 2 */
#define KVM_TRACE_EXIT_GRR 67 /* 3 */
#define KVM_TRACE_EXIT_GVA 72 /* 8 */
#define KVM_TRACE_EXIT_GHFC 73 /* 9 */
#define KVM_TRACE_EXIT_GPA 74 /* 10 */
/* Tracepoints for VM exits */
#define kvm_trace_symbol_exit_types \
......@@ -83,9 +100,17 @@ DEFINE_EVENT(kvm_transition, kvm_out,
{ KVM_TRACE_EXIT_MSA_FPE, "MSA FPE" }, \
{ KVM_TRACE_EXIT_FPE, "FPE" }, \
{ KVM_TRACE_EXIT_MSA_DISABLED, "MSA Disabled" }, \
{ KVM_TRACE_EXIT_GUEST_EXIT, "Guest Exit" }, \
{ KVM_TRACE_EXIT_WAIT, "WAIT" }, \
{ KVM_TRACE_EXIT_CACHE, "CACHE" }, \
{ KVM_TRACE_EXIT_SIGNAL, "Signal" }
{ KVM_TRACE_EXIT_SIGNAL, "Signal" }, \
{ KVM_TRACE_EXIT_GPSI, "GPSI" }, \
{ KVM_TRACE_EXIT_GSFC, "GSFC" }, \
{ KVM_TRACE_EXIT_HC, "HC" }, \
{ KVM_TRACE_EXIT_GRR, "GRR" }, \
{ KVM_TRACE_EXIT_GVA, "GVA" }, \
{ KVM_TRACE_EXIT_GHFC, "GHFC" }, \
{ KVM_TRACE_EXIT_GPA, "GPA" }
TRACE_EVENT(kvm_exit,
TP_PROTO(struct kvm_vcpu *vcpu, unsigned int reason),
......@@ -158,6 +183,8 @@ TRACE_EVENT(kvm_exit,
{ KVM_TRACE_COP0(16, 4), "Config4" }, \
{ KVM_TRACE_COP0(16, 5), "Config5" }, \
{ KVM_TRACE_COP0(16, 7), "Config7" }, \
{ KVM_TRACE_COP0(17, 1), "MAAR" }, \
{ KVM_TRACE_COP0(17, 2), "MAARI" }, \
{ KVM_TRACE_COP0(26, 0), "ECC" }, \
{ KVM_TRACE_COP0(30, 0), "ErrorEPC" }, \
{ KVM_TRACE_COP0(31, 2), "KScratch1" }, \
......@@ -268,6 +295,51 @@ TRACE_EVENT(kvm_asid_change,
__entry->new_asid)
);
TRACE_EVENT(kvm_guestid_change,
TP_PROTO(struct kvm_vcpu *vcpu, unsigned int guestid),
TP_ARGS(vcpu, guestid),
TP_STRUCT__entry(
__field(unsigned int, guestid)
),
TP_fast_assign(
__entry->guestid = guestid;
),
TP_printk("GuestID: 0x%02x",
__entry->guestid)
);
TRACE_EVENT_FN(kvm_guest_mode_change,
TP_PROTO(struct kvm_vcpu *vcpu),
TP_ARGS(vcpu),
TP_STRUCT__entry(
__field(unsigned long, epc)
__field(unsigned long, pc)
__field(unsigned long, badvaddr)
__field(unsigned int, status)
__field(unsigned int, cause)
),
TP_fast_assign(
__entry->epc = kvm_read_c0_guest_epc(vcpu->arch.cop0);
__entry->pc = vcpu->arch.pc;
__entry->badvaddr = kvm_read_c0_guest_badvaddr(vcpu->arch.cop0);
__entry->status = kvm_read_c0_guest_status(vcpu->arch.cop0);
__entry->cause = kvm_read_c0_guest_cause(vcpu->arch.cop0);
),
TP_printk("EPC: 0x%08lx PC: 0x%08lx Status: 0x%08x Cause: 0x%08x BadVAddr: 0x%08lx",
__entry->epc,
__entry->pc,
__entry->status,
__entry->cause,
__entry->badvaddr),
kvm_guest_mode_change_trace_reg,
kvm_guest_mode_change_trace_unreg
);
#endif /* _TRACE_KVM_H */
/* This part must be outside protection */
......
arch/mips/kvm/trap_emul.c
View file @ 2d3e4866
......@@ -12,6 +12,7 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/kvm_host.h>
#include <linux/log2.h>
#include <linux/uaccess.h>
#include <linux/vmalloc.h>
#include <asm/mmu_context.h>
......@@ -40,6 +41,29 @@ static gpa_t kvm_trap_emul_gva_to_gpa_cb(gva_t gva)
return gpa;
}
static int kvm_trap_emul_no_handler(struct kvm_vcpu *vcpu)
{
u32 __user *opc = (u32 __user *) vcpu->arch.pc;
u32 cause = vcpu->arch.host_cp0_cause;
u32 exccode = (cause & CAUSEF_EXCCODE) >> CAUSEB_EXCCODE;
unsigned long badvaddr = vcpu->arch.host_cp0_badvaddr;
u32 inst = 0;
/*
* Fetch the instruction.
*/
if (cause & CAUSEF_BD)
opc += 1;
kvm_get_badinstr(opc, vcpu, &inst);
kvm_err("Exception Code: %d not handled @ PC: %p, inst: 0x%08x BadVaddr: %#lx Status: %#x\n",
exccode, opc, inst, badvaddr,
kvm_read_c0_guest_status(vcpu->arch.cop0));
kvm_arch_vcpu_dump_regs(vcpu);
vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
return RESUME_HOST;
}
static int kvm_trap_emul_handle_cop_unusable(struct kvm_vcpu *vcpu)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
......@@ -82,6 +106,10 @@ static int kvm_trap_emul_handle_cop_unusable(struct kvm_vcpu *vcpu)
ret = RESUME_HOST;
break;
case EMULATE_HYPERCALL:
ret = kvm_mips_handle_hypcall(vcpu);
break;
default:
BUG();
}
......@@ -484,6 +512,31 @@ static int kvm_trap_emul_handle_msa_disabled(struct kvm_vcpu *vcpu)
return ret;
}
static int kvm_trap_emul_hardware_enable(void)
{
return 0;
}
static void kvm_trap_emul_hardware_disable(void)
{
}
static int kvm_trap_emul_check_extension(struct kvm *kvm, long ext)
{
int r;
switch (ext) {
case KVM_CAP_MIPS_TE:
r = 1;
break;
default:
r = 0;
break;
}
return r;
}
static int kvm_trap_emul_vcpu_init(struct kvm_vcpu *vcpu)
{
struct mm_struct *kern_mm = &vcpu->arch.guest_kernel_mm;
......@@ -561,6 +614,9 @@ static int kvm_trap_emul_vcpu_setup(struct kvm_vcpu *vcpu)
u32 config, config1;
int vcpu_id = vcpu->vcpu_id;
/* Start off the timer at 100 MHz */
kvm_mips_init_count(vcpu, 100*1000*1000);
/*
* Arch specific stuff, set up config registers properly so that the
* guest will come up as expected
......@@ -589,6 +645,13 @@ static int kvm_trap_emul_vcpu_setup(struct kvm_vcpu *vcpu)
/* Read the cache characteristics from the host Config1 Register */
config1 = (read_c0_config1() & ~0x7f);
/* DCache line size not correctly reported in Config1 on Octeon CPUs */
if (cpu_dcache_line_size()) {
config1 &= ~MIPS_CONF1_DL;
config1 |= ((ilog2(cpu_dcache_line_size()) - 1) <<
MIPS_CONF1_DL_SHF) & MIPS_CONF1_DL;
}
/* Set up MMU size */
config1 &= ~(0x3f << 25);
config1 |= ((KVM_MIPS_GUEST_TLB_SIZE - 1) << 25);
......@@ -892,10 +955,12 @@ static int kvm_trap_emul_set_one_reg(struct kvm_vcpu *vcpu,
if (v & CAUSEF_DC) {
/* disable timer first */
kvm_mips_count_disable_cause(vcpu);
kvm_change_c0_guest_cause(cop0, ~CAUSEF_DC, v);
kvm_change_c0_guest_cause(cop0, (u32)~CAUSEF_DC,
v);
} else {
/* enable timer last */
kvm_change_c0_guest_cause(cop0, ~CAUSEF_DC, v);
kvm_change_c0_guest_cause(cop0, (u32)~CAUSEF_DC,
v);
kvm_mips_count_enable_cause(vcpu);
}
} else {
......@@ -1230,7 +1295,11 @@ static struct kvm_mips_callbacks kvm_trap_emul_callbacks = {
.handle_msa_fpe = kvm_trap_emul_handle_msa_fpe,
.handle_fpe = kvm_trap_emul_handle_fpe,
.handle_msa_disabled = kvm_trap_emul_handle_msa_disabled,
.handle_guest_exit = kvm_trap_emul_no_handler,
.hardware_enable = kvm_trap_emul_hardware_enable,
.hardware_disable = kvm_trap_emul_hardware_disable,
.check_extension = kvm_trap_emul_check_extension,
.vcpu_init = kvm_trap_emul_vcpu_init,
.vcpu_uninit = kvm_trap_emul_vcpu_uninit,
.vcpu_setup = kvm_trap_emul_vcpu_setup,
......
arch/mips/kvm/vz.c 0 → 100644
View file @ 2d3e4866
This diff is collapsed.
arch/mips/mm/cache.c
View file @ 2d3e4866
......@@ -24,6 +24,7 @@
/* Cache operations. */
void (*flush_cache_all)(void);
void (*__flush_cache_all)(void);
EXPORT_SYMBOL_GPL(__flush_cache_all);
void (*flush_cache_mm)(struct mm_struct *mm);
void (*flush_cache_range)(struct vm_area_struct *vma, unsigned long start,
unsigned long end);
......
arch/mips/mm/init.c
View file @ 2d3e4866
......@@ -348,7 +348,7 @@ void maar_init(void)
upper = ((upper & MIPS_MAAR_ADDR) << 4) | 0xffff;
pr_info(" [%d]: ", i / 2);
if (!(attr & MIPS_MAAR_V)) {
if (!(attr & MIPS_MAAR_VL)) {
pr_cont("disabled\n");
continue;
}
......
arch/powerpc/include/asm/disassemble.h
View file @ 2d3e4866
......@@ -87,6 +87,11 @@ static inline unsigned int get_oc(u32 inst)
return (inst >> 11) & 0x7fff;
}
static inline unsigned int get_tx_or_sx(u32 inst)
{
return (inst) & 0x1;
}
#define IS_XFORM(inst) (get_op(inst) == 31)
#define IS_DSFORM(inst) (get_op(inst) >= 56)
......
arch/powerpc/include/asm/iommu.h
View file @ 2d3e4866
......@@ -296,11 +296,21 @@ static inline void iommu_restore(void)
#endif
/* The API to support IOMMU operations for VFIO */
extern int iommu_tce_clear_param_check(struct iommu_table *tbl,
unsigned long ioba, unsigned long tce_value,
unsigned long npages);
extern int iommu_tce_put_param_check(struct iommu_table *tbl,
unsigned long ioba, unsigned long tce);
extern int iommu_tce_check_ioba(unsigned long page_shift,
unsigned long offset, unsigned long size,
unsigned long ioba, unsigned long npages);
extern int iommu_tce_check_gpa(unsigned long page_shift,
unsigned long gpa);
#define iommu_tce_clear_param_check(tbl, ioba, tce_value, npages) \
(iommu_tce_check_ioba((tbl)->it_page_shift, \
(tbl)->it_offset, (tbl)->it_size, \
(ioba), (npages)) || (tce_value))
#define iommu_tce_put_param_check(tbl, ioba, gpa) \
(iommu_tce_check_ioba((tbl)->it_page_shift, \
(tbl)->it_offset, (tbl)->it_size, \
(ioba), 1) || \
iommu_tce_check_gpa((tbl)->it_page_shift, (gpa)))
extern void iommu_flush_tce(struct iommu_table *tbl);
extern int iommu_take_ownership(struct iommu_table *tbl);
......
arch/powerpc/include/asm/kvm_host.h
View file @ 2d3e4866
......@@ -45,9 +45,6 @@
#define __KVM_HAVE_ARCH_INTC_INITIALIZED
#ifdef CONFIG_KVM_MMIO
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
#endif
#define KVM_HALT_POLL_NS_DEFAULT 10000 /* 10 us */
/* These values are internal and can be increased later */
......@@ -191,6 +188,13 @@ struct kvmppc_pginfo {
atomic_t refcnt;
};
struct kvmppc_spapr_tce_iommu_table {
struct rcu_head rcu;
struct list_head next;
struct iommu_table *tbl;
struct kref kref;
};
struct kvmppc_spapr_tce_table {
struct list_head list;
struct kvm *kvm;
......@@ -199,6 +203,7 @@ struct kvmppc_spapr_tce_table {
u32 page_shift;
u64 offset; /* in pages */
u64 size; /* window size in pages */
struct list_head iommu_tables;
struct page *pages[0];
};
......@@ -345,6 +350,7 @@ struct kvmppc_pte {
bool may_read : 1;
bool may_write : 1;
bool may_execute : 1;
unsigned long wimg;
u8 page_size; /* MMU_PAGE_xxx */
};
......@@ -441,6 +447,11 @@ struct mmio_hpte_cache {
unsigned int index;
};
#define KVMPPC_VSX_COPY_NONE 0
#define KVMPPC_VSX_COPY_WORD 1
#define KVMPPC_VSX_COPY_DWORD 2
#define KVMPPC_VSX_COPY_DWORD_LOAD_DUMP 3
struct openpic;
struct kvm_vcpu_arch {
......@@ -644,6 +655,21 @@ struct kvm_vcpu_arch {
u8 io_gpr; /* GPR used as IO source/target */
u8 mmio_host_swabbed;
u8 mmio_sign_extend;
/* conversion between single and double precision */
u8 mmio_sp64_extend;
/*
* Number of simulations for vsx.
* If we use 2*8bytes to simulate 1*16bytes,
* then the number should be 2 and
* mmio_vsx_copy_type=KVMPPC_VSX_COPY_DWORD.
* If we use 4*4bytes to simulate 1*16bytes,
* the number should be 4 and
* mmio_vsx_copy_type=KVMPPC_VSX_COPY_WORD.
*/
u8 mmio_vsx_copy_nums;
u8 mmio_vsx_offset;
u8 mmio_vsx_copy_type;
u8 mmio_vsx_tx_sx_enabled;
u8 osi_needed;
u8 osi_enabled;
u8 papr_enabled;
......@@ -732,6 +758,8 @@ struct kvm_vcpu_arch {
};
#define VCPU_FPR(vcpu, i) (vcpu)->arch.fp.fpr[i][TS_FPROFFSET]
#define VCPU_VSX_FPR(vcpu, i, j) ((vcpu)->arch.fp.fpr[i][j])
#define VCPU_VSX_VR(vcpu, i) ((vcpu)->arch.vr.vr[i])
/* Values for vcpu->arch.state */
#define KVMPPC_VCPU_NOTREADY 0
......@@ -745,6 +773,7 @@ struct kvm_vcpu_arch {
#define KVM_MMIO_REG_FPR 0x0020
#define KVM_MMIO_REG_QPR 0x0040
#define KVM_MMIO_REG_FQPR 0x0060
#define KVM_MMIO_REG_VSX 0x0080
#define __KVM_HAVE_ARCH_WQP
#define __KVM_HAVE_CREATE_DEVICE
......
arch/powerpc/include/asm/kvm_ppc.h
View file @ 2d3e4866
......@@ -78,9 +78,15 @@ extern int kvmppc_handle_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
extern int kvmppc_handle_loads(struct kvm_run *run, struct kvm_vcpu *vcpu,
unsigned int rt, unsigned int bytes,
int is_default_endian);
extern int kvmppc_handle_vsx_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
unsigned int rt, unsigned int bytes,
int is_default_endian, int mmio_sign_extend);
extern int kvmppc_handle_store(struct kvm_run *run, struct kvm_vcpu *vcpu,
u64 val, unsigned int bytes,
int is_default_endian);
extern int kvmppc_handle_vsx_store(struct kvm_run *run, struct kvm_vcpu *vcpu,
int rs, unsigned int bytes,
int is_default_endian);
extern int kvmppc_load_last_inst(struct kvm_vcpu *vcpu,
enum instruction_type type, u32 *inst);
......@@ -132,6 +138,9 @@ extern void kvmppc_core_vcpu_put(struct kvm_vcpu *vcpu);
extern int kvmppc_core_prepare_to_enter(struct kvm_vcpu *vcpu);
extern int kvmppc_core_pending_dec(struct kvm_vcpu *vcpu);
extern void kvmppc_core_queue_program(struct kvm_vcpu *vcpu, ulong flags);
extern void kvmppc_core_queue_fpunavail(struct kvm_vcpu *vcpu);
extern void kvmppc_core_queue_vec_unavail(struct kvm_vcpu *vcpu);
extern void kvmppc_core_queue_vsx_unavail(struct kvm_vcpu *vcpu);
extern void kvmppc_core_queue_dec(struct kvm_vcpu *vcpu);
extern void kvmppc_core_dequeue_dec(struct kvm_vcpu *vcpu);
extern void kvmppc_core_queue_external(struct kvm_vcpu *vcpu,
......@@ -164,13 +173,19 @@ extern long kvmppc_prepare_vrma(struct kvm *kvm,
extern void kvmppc_map_vrma(struct kvm_vcpu *vcpu,
struct kvm_memory_slot *memslot, unsigned long porder);
extern int kvmppc_pseries_do_hcall(struct kvm_vcpu *vcpu);
extern long kvm_spapr_tce_attach_iommu_group(struct kvm *kvm, int tablefd,
struct iommu_group *grp);
extern void kvm_spapr_tce_release_iommu_group(struct kvm *kvm,
struct iommu_group *grp);
extern long kvm_vm_ioctl_create_spapr_tce(struct kvm *kvm,
struct kvm_create_spapr_tce_64 *args);
extern struct kvmppc_spapr_tce_table *kvmppc_find_table(
struct kvm_vcpu *vcpu, unsigned long liobn);
extern long kvmppc_ioba_validate(struct kvmppc_spapr_tce_table *stt,
unsigned long ioba, unsigned long npages);
struct kvm *kvm, unsigned long liobn);
#define kvmppc_ioba_validate(stt, ioba, npages) \
(iommu_tce_check_ioba((stt)->page_shift, (stt)->offset, \
(stt)->size, (ioba), (npages)) ? \
H_PARAMETER : H_SUCCESS)
extern long kvmppc_tce_validate(struct kvmppc_spapr_tce_table *tt,
unsigned long tce);
extern long kvmppc_gpa_to_ua(struct kvm *kvm, unsigned long gpa,
......@@ -240,6 +255,7 @@ union kvmppc_one_reg {
u64 dval;
vector128 vval;
u64 vsxval[2];
u32 vsx32val[4];
struct {
u64 addr;
u64 length;
......
arch/powerpc/include/asm/ppc-opcode.h
View file @ 2d3e4866
This diff is collapsed.
arch/powerpc/include/uapi/asm/kvm.h
View file @ 2d3e4866
......@@ -29,6 +29,9 @@
#define __KVM_HAVE_IRQ_LINE
#define __KVM_HAVE_GUEST_DEBUG
/* Not always available, but if it is, this is the correct offset. */
#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
struct kvm_regs {
__u64 pc;
__u64 cr;
......
arch/powerpc/kernel/iommu.c
View file @ 2d3e4866
This diff is collapsed.
arch/powerpc/kvm/Kconfig
View file @ 2d3e4866
This diff is collapsed.
arch/powerpc/kvm/book3s.c
View file @ 2d3e4866
This diff is collapsed.
arch/powerpc/kvm/book3s_64_mmu.c
View file @ 2d3e4866
This diff is collapsed.
arch/powerpc/kvm/book3s_64_mmu_host.c
View file @ 2d3e4866
This diff is collapsed.
arch/powerpc/kvm/book3s_64_vio.c
View file @ 2d3e4866
This diff is collapsed.
arch/powerpc/kvm/book3s_64_vio_hv.c
View file @ 2d3e4866
This diff is collapsed.
arch/powerpc/kvm/book3s_emulate.c
View file @ 2d3e4866
This diff is collapsed.
arch/powerpc/kvm/book3s_hv.c
View file @ 2d3e4866
This diff is collapsed.
arch/powerpc/kvm/book3s_pr.c
View file @ 2d3e4866
This diff is collapsed.
arch/powerpc/kvm/book3s_pr_papr.c
View file @ 2d3e4866
This diff is collapsed.
arch/powerpc/kvm/booke.c
View file @ 2d3e4866
This diff is collapsed.
arch/powerpc/kvm/e500_mmu_host.c
View file @ 2d3e4866
This diff is collapsed.
arch/powerpc/kvm/emulate.c
View file @ 2d3e4866
This diff is collapsed.
arch/powerpc/kvm/emulate_loadstore.c
View file @ 2d3e4866
This diff is collapsed.
arch/powerpc/kvm/powerpc.c
View file @ 2d3e4866
This diff is collapsed.
arch/s390/include/asm/kvm_host.h
View file @ 2d3e4866
This diff is collapsed.
arch/s390/include/asm/sclp.h
View file @ 2d3e4866
This diff is collapsed.
arch/s390/include/uapi/asm/kvm.h
View file @ 2d3e4866
This diff is collapsed.
arch/s390/kvm/gaccess.c
View file @ 2d3e4866
This diff is collapsed.
arch/s390/kvm/intercept.c
View file @ 2d3e4866
This diff is collapsed.
arch/s390/kvm/interrupt.c
View file @ 2d3e4866
This diff is collapsed.
arch/s390/kvm/kvm-s390.c
View file @ 2d3e4866
This diff is collapsed.
arch/s390/kvm/kvm-s390.h
View file @ 2d3e4866
This diff is collapsed.
arch/s390/kvm/priv.c
View file @ 2d3e4866
This diff is collapsed.
arch/s390/kvm/sthyi.c
View file @ 2d3e4866
This diff is collapsed.
arch/s390/kvm/trace-s390.h
View file @ 2d3e4866
This diff is collapsed.
arch/s390/kvm/vsie.c
View file @ 2d3e4866
This diff is collapsed.
arch/s390/tools/gen_facilities.c
View file @ 2d3e4866
This diff is collapsed.
arch/x86/include/asm/kvm_emulate.h
View file @ 2d3e4866
This diff is collapsed.
arch/x86/include/asm/kvm_host.h
View file @ 2d3e4866
This diff is collapsed.
arch/x86/include/asm/vmx.h
View file @ 2d3e4866
This diff is collapsed.
arch/x86/include/uapi/asm/kvm.h
View file @ 2d3e4866
This diff is collapsed.
arch/x86/include/uapi/asm/vmx.h
View file @ 2d3e4866
This diff is collapsed.
arch/x86/kernel/kvm.c
View file @ 2d3e4866
This diff is collapsed.
arch/x86/kvm/Kconfig
View file @ 2d3e4866
This diff is collapsed.
arch/x86/kvm/Makefile
View file @ 2d3e4866
This diff is collapsed.
arch/x86/kvm/assigned-dev.c deleted 100644 → 0
View file @ 9c6ee01e
This diff is collapsed.
arch/x86/kvm/assigned-dev.h deleted 100644 → 0
View file @ 9c6ee01e
This diff is collapsed.
arch/x86/kvm/cpuid.c
View file @ 2d3e4866
This diff is collapsed.
arch/x86/kvm/cpuid.h
View file @ 2d3e4866
This diff is collapsed.
arch/x86/kvm/emulate.c
View file @ 2d3e4866
This diff is collapsed.
arch/x86/kvm/i8259.c
View file @ 2d3e4866
This diff is collapsed.
arch/x86/kvm/ioapic.c
View file @ 2d3e4866
This diff is collapsed.
arch/x86/kvm/ioapic.h
View file @ 2d3e4866
This diff is collapsed.
arch/x86/kvm/iommu.c deleted 100644 → 0
View file @ 9c6ee01e
This diff is collapsed.
arch/x86/kvm/irq.c
View file @ 2d3e4866
This diff is collapsed.
arch/x86/kvm/irq.h
View file @ 2d3e4866
This diff is collapsed.
arch/x86/kvm/irq_comm.c
View file @ 2d3e4866
This diff is collapsed.
arch/x86/kvm/lapic.c
View file @ 2d3e4866
This diff is collapsed.
arch/x86/kvm/mmu.c
View file @ 2d3e4866
This diff is collapsed.
arch/x86/kvm/mmu.h
View file @ 2d3e4866
This diff is collapsed.
arch/x86/kvm/paging_tmpl.h
View file @ 2d3e4866
This diff is collapsed.
arch/x86/kvm/svm.c
View file @ 2d3e4866
This diff is collapsed.
arch/x86/kvm/vmx.c
View file @ 2d3e4866
This diff is collapsed.
arch/x86/kvm/x86.c
View file @ 2d3e4866
This diff is collapsed.
arch/x86/kvm/x86.h
View file @ 2d3e4866
This diff is collapsed.
drivers/s390/char/sclp_early.c
View file @ 2d3e4866
This diff is collapsed.
include/kvm/arm_arch_timer.h
View file @ 2d3e4866
This diff is collapsed.
include/kvm/arm_pmu.h
View file @ 2d3e4866
This diff is collapsed.
include/kvm/arm_vgic.h
View file @ 2d3e4866
This diff is collapsed.
include/linux/kvm_host.h
View file @ 2d3e4866
This diff is collapsed.
include/uapi/linux/kvm.h
View file @ 2d3e4866
This diff is collapsed.
tools/Makefile
View file @ 2d3e4866
This diff is collapsed.
tools/arch/s390/include/uapi/asm/kvm.h
View file @ 2d3e4866
This diff is collapsed.
tools/kvm/kvm_stat/kvm_stat
View file @ 2d3e4866
This diff is collapsed.
tools/kvm/kvm_stat/kvm_stat.txt
View file @ 2d3e4866
This diff is collapsed.
virt/kvm/arm/arch_timer.c
View file @ 2d3e4866
This diff is collapsed.
virt/kvm/arm/hyp/vgic-v2-sr.c
View file @ 2d3e4866
This diff is collapsed.
virt/kvm/arm/hyp/vgic-v3-sr.c
View file @ 2d3e4866
This diff is collapsed.
virt/kvm/arm/pmu.c
View file @ 2d3e4866
This diff is collapsed.
virt/kvm/arm/vgic/vgic-init.c
View file @ 2d3e4866
This diff is collapsed.
virt/kvm/arm/vgic/vgic-v2.c
View file @ 2d3e4866
This diff is collapsed.
virt/kvm/arm/vgic/vgic-v3.c
View file @ 2d3e4866
This diff is collapsed.
virt/kvm/arm/vgic/vgic.c
View file @ 2d3e4866
This diff is collapsed.
virt/kvm/arm/vgic/vgic.h
View file @ 2d3e4866
This diff is collapsed.
virt/kvm/eventfd.c
View file @ 2d3e4866
This diff is collapsed.
virt/kvm/irqchip.c
View file @ 2d3e4866
This diff is collapsed.
virt/kvm/kvm_main.c
View file @ 2d3e4866
This diff is collapsed.
virt/kvm/vfio.c
View file @ 2d3e4866
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7